Leti Announces H2020 Project to Develop Si-photonics-based Transceivers for Low-cost, High-speed Data Communications

  Leti Announces H2020 Project to Develop Si-photonics-based Transceivers for Low-cost, High-speed Data Communications

 COSMICC, Horizon 2020 Project, Combines CMOS Electronics and Silicon Photonics With Innovative High-throughput, Fiber-attachment Techniques To Reach beyond 1 Tb/s Data Rate

GRENOBLE, France – Nov. 21, 2016 – Leti, an institute of CEA Tech, announced the launch of a European Commission Horizon 2020 project to enable mass commercialization of Si-photonics-based transceivers to meet future data-transmission requirements in data centers and super computing systems.

The Leti-coordinated COSMICC project will combine CMOS electronics and Si-photonics with innovative high-throughput, fiber-attachment techniques. These scalable solutions will provide performance improvement an order of magnitude better than current VCSELs transceivers, and the COSMICC-developed technology will address future data-transmission needs with a target cost per bit that traditional wavelength-division multiplexing (WDM) transceivers cannot meet.

For example, the project’s 11 partners from five countries are focusing on developing mid-board optical transceivers with data rates up to 2.4 Tb/s with 200 Gb/s per fiber using 12 fibers. The devices will consume less than 2 pJ/bit. and cost approximately 0.2 Euros/Gb/s.

“By enhancing an R&D photonic integration platform from project member STMicroelectronics, the partners in COSMICC aim to demonstrate the transceivers by 2019,” said project leader Ségolène Olivier of Leti. “We also plan to establish a new value chain that will facilitate rapid adoption of the technologies developed by our members.”

Several technological developments will be used to boost the photonic integration platform’s high data-rate performance, while also reducing power consumption.

A first improvement will be the introduction of a SiN layer that will allow development of temperature-insensitive MUX/DEMUX devices for coarse WDM operation. In addition, the SiN layer will serve as an intermediate wave-guiding layer for optical input/output to and from the photonic chip.

Additional steps will enhance modulator performance to 50 Gb/s, while making the transceivers more compact and reducing energy consumption. The partners will also evaluate capacitive modulators, slow-wave depletion modulators with 1D periodicity, and more advanced approaches. These include GeSi electro-absorption modulators with tunable Si composition and photonic crystal electro-refraction modulators to make micrometer-scale devices. In addition, a hybrid III-V on Si laser will be integrated in the SOI/SiN platform in the more advanced transmitter circuits.

Project demonstrators will be tested in both lab and field environments.

In addition to Leti, project participants include STMicroelectronics (France), STMicroelectronics (Italy), University Pavia (Italy), Finisar (Germany), Vario-Optics (Switzerland), Seagate (UK), University Paris-Sud (France), University St. Andrews (UK), University Southampton (UK) and Ayming (France).

 

 

 

Figure 1: Schematic of COSMICC on-board optical transceiver
at 2.4 Tb/s (50 Gbps/wavelength, 4 CWDM wavelengths per fiber,
12 fibers for transmission, 12 fibers for reception.

About Leti (France)

As one of three advanced-research institutes within the CEA Technological Research Division, Leti serves as a bridge between basic research and production of micro- and nanotechnologies that improve the lives of people around the world. It is committed to creating innovation and transferring it to industry. Backed by its portfolio of 2,800 patents, Leti partners with large industrials, SMEs and startups to tailor advanced solutions that strengthen their competitive positions. It has launched 59 startups. Its 8,500m² of new-generation cleanroom space feature 200mm and 300mm wafer processing of micro and nano solutions for applications ranging from space to smart devices. With a staff of more than 1,900, Leti is based in Grenoble, France, and has offices in Silicon Valley, Calif., and Tokyo. Follow us on www.leti.fr and @CEA_Leti.

Press contact

Agency       

+33 6 74 93 23 47                              

Email Contact    

 

 

 

 

 

 

 

 

 



Read the complete story ...


Review Article Be the first to review this article
RELATED NEWS
Latest Blog Posts
    team ShareCG.com Registration is Open for New members
    June 8th, 2022 by team
    We just open ShareCG.com registration for new member. We still see high level of robot attempts, but we hope we address that issue. If not, we will close the registration and look for other solutions. Be ware that we are not supporting VPN, …
    Susan Smith HP Announces HP Z240 Tower and Z240 SFF Workstations
    October 2nd, 2015 by Susan Smith
    Jeff Wood - vice president, WW Product Management,  Workstation and Thin Client Business HP and Josh Peterson- director, WW Product Management,  Workstation and Thin Client Business , HP met with the press in a virtual press briefing prior to the …



© 2022 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us
ShareCG™ is a trademark of Internet Business Systems, Inc.

Report a Bug Report Abuse Make a Suggestion About Privacy Policy Contact Us User Agreement Advertise