Rolling pin: Simple textured rolling pin prop
OP Dive Tank: simple helmet prop
Goth Base: Fully textured base prop
Day 1- Walter the Elf Texture: This is a texture for the Walter figure available in the 3D starter pack by DAZ to turn him into a Christmas elf.
Day 3 - Steampunk staff - copper patina: This is a fully textured staff prop parented to the right hand. It was designed with the steampunk genre in mind.
Day 4 - OP Staff Steel: Steam punk staff with a burnished steel texture
Day 5 - OP Staff copper: copper textured steam punk staff. This is the last of the steam punk staffs. (Just to inform those that are getting tired of the same prop with different textures.)
Day 7 - Kitty Camisole: A texture for Decoco's camisole
Mjolnir: Thor's legendary hammer. This prop comes completely textured and parented to the right hand.
Easter Eggs: A simple egg prop with 8 different textures including a chocolate texture.
Wishing Well: A simple, fully textured wishing well prop. Ground and Backdrop are not included.
Portal of Dreams: Swirling mists form in the middle of the ancient portal. What steps through is up to you. Comes with two textures.
OP Window: Fully textured window, wall and floor prop. *Bench is not included*
Butterfly backdrop: Simple backdrop prop. Comes fully textured.
OP Stained Glass Window: Fully textured window prop. Wall is not included.
OP Soundbox: I would call it an equalizer but there is a lot more on this bugger. Everything is done with textures rather than model each little nob to save on file size and cut down on render time. I hope you all enjoy this.
Three props at once: I started out just making the vase, then I needed a table to put it on and finally a dynamic cloth tablecloth. I hope you get some use out of them.
Beach ball: Just in time for some independence day fun on the beach. This star spangled beach ball prop comes fully textured. I hope you all can get some use out of it.
OP collar: A fully textured collar prop parented to the neck.
OP Flower POt: Fully textured simple pot of flowers. There is an additional moss texture in the textures folder complete with a bump map if you want to use it.
Op Wings: Just a simple wing prop with texture and transmap.
Casual Summertime Addon: 2 extra textures that co-ordinate with my casual summertime textures found in Rendo's market place.
CM's Texture Add-on for the Psyche V4 Dress: CM's Texture Add-on for Psyche is a beautiful green and yellow creation. There are no bump maps or DS MATS as I haven't learned how to make these as yet. When I learn, I'll be sure to update the file. Please be sure to let me know how you like it and/or whether there are problems with the textures. Suggestions are very welcome as this is my first texture freebie. Thanks.
LOTS Blk Velvet Dress: This is my first attempt at doing a texture for Pretty3d Lassie of the Sea, which you can get the full outfit from http://www.pretty3d.com. The Black Velvet Dress looks good paired up with Nirvy's Baroque Prive Freebie, as you you can see in my graphic. This file only contains the dress only! Tested in Daz3d only!
Textures for Channings EX jacket: 2 sets of textures for Channings EX jacket ( available for DAZ forums ) Only tested in Daz Studio
my 3d house: house I made
Morph Set 1 for Decoco: A set of morphs for Decoco, including some new expressions. The Decoco character was created by Akatora, and is available from http://members3.jcom.home.ne.jp/mowais/ have fun. DFZ
Little Miki2 - young teen character for Miki2: After seeing a few kids and teens characters for the Daz figures, I thought I'd try my luck with a lesser known figure like Miki2. Actually, I tried Miki first, but my friend didn't have a single outfit that supported her "Ultimate Morphs". He did however have just one that would fit the Miki2 version, so here she is, Little Miki2! (See readme file for promo credits) ------------------------------------------------------ Updated V 1.07 Added mix poses ====================================== Requirements: -Miki 2.0 -Miki2's Ultimate Body Morphs & Ultimate Head Morphs -Daz|Studio users also need -Daz|Studio users also need InjectPMD
LM2-Rebel Clothing fits: Here's the set of fit morphs used in the promos for my Little Miki2 character. Due to the tight fitting nature of the outfit, some poses may cause a bit of poke-through and may require the morphs to be adjusted to eliminate them. (See readme file for promo credits) ------------------------------------------------------ Updated V1.01 Added a Poser script to automatically set scaling for the fit poses. ====================================== Requirements: -Rebel Clothing -Little Miki2
LM2 Refit-Mamomamo CB Collection 1: When I saw the outfits, I just had to have them...and I don't even have ChibiBel! What can I say...I really like Mamomano's style. Because of the way clothing fits with scaled figures, I had to first convert the them to Miki2 and then create poses to refit. After a lot of hard work, I hopefully have them working right! (See readme file for promo credits) ====================================== Requirements: -Miki 2.0 -MMCasual, MMCutieD and MMGDress2 for CB -Little Miki2 -RTEncoder
MorningCasual ColorChange: While I was working on the renders for the G2 Teens, I created a few custom shaders to jazz-up the colors and styles of the Morning Casual set. So, what is a "ColorChange" shader? Basically, it creates ColorChange zones that can be changed into practically any color. With up to three different zones available, the combinations are virtually limitless! -------------------------------------------------- Requirements: Morning Casual: included with G2 Olivia from Content Paradise.
G2 Teens - Ollie, Sydnie & Jessie: My previous teen character was getting kind of lonely, so I brought over a few of the G2 girls for her to hang out with. Meet Ollie, Sydnie and Jessie. Ollie is sweet and sassy, Jessie's kind of shy, and Sydnie is bit of a rebel. They come with a set of fitting poses for their conforming hair, the Morning Casual set (included with G2 Olivia), and parts of the Poser 7 Casual set (included with Poser 7 or later). (See readme file for promo credits) ------------------------------------------------------ Updated v1.2 -Added mix poses ====================================== Requirements: -G2 Jessi, G2 Olivia or G2 Sydney -Sydney Ultimate Head Morphs or Jessi G2 Ultimate Head Morphs -G2 Females Ultimate Body Morphs -Daz|Studio users also need InjectPMD
Purple Paradise for 3Dream's Sun: A tanktop texture set for the Sun swimsuit by  3Dream. Includes displacement and specular maps for detailed renders.======================================Requirements: -Little One-Sun
Summer Sun for Little One's clothing: Swimwear and sportswear textures and mats for Little One's clothing sets by 3Dream. The included fit poses allow for many layered looks and styles.  HotBikini:   + 18 textures  + 18 solid color mats LuxBlouse:   + 6 textures   + 18 solid color mats   + 5 button styles and 5 shader variations      Includes wet cloth and 3 mutli-layered sheer cloth shaders LuxPants:    + 18 textures  + 18 solid color mats  + 7 styles: pants, cuffed pants, capri short pants, shorts, knee-length long shorts       and two skimpy shorts  LuxSkirt:   + 18 textures   + 18 solid color mats   + 4 styles: skirt, mini skirt, swimsuit skirt and wrap   + 4 shader variations       Includes 3 mutli-layered sheer cloth shaders    SunSandals:   + 5 strap styles, including single-strap and two-strap variations   + 18 cloth strap textures   + 18 solid color cloth strap mats   + 18 solid color rubber strap mats, with solid and transparent variations   + 18 solid color rubber sole textures with 2 variations   + 2 wood sole textures  SunSuit:    + 6 textures     + 18 solid color mats     + 5 styles: one-piece, tank top, mid-riff short top, sports top and bottom        Includes low-cut neckline variations  Xmas Shoes:    + 24 matching styles for clothing textures    + 17 solid color shoe and sole mats        Includes solid and transparent mesh variationsBONUS: LuxShirt, a men's shirt conversion of LuxBlouse. Includes conversions of  LuxBlouse mats.   Requires RTEncoder or RTEJava to decode files. ======================================Requirements: -Little One-HotBikini-LuxPants-Sun-Xmas
Little Family (Update 1.01): 8 Character poses for Poser and DAZ Studio + Preteen and teen boy and girl+ Young and mature man and womanBONUS:  Keyframed animation for creating characters of ages in between those included in the set. GroupDial pose to organize Little One's many morphs. ======================================Requirements: -Little One  Merchant Resource:  The data contained in this product may be used to create other products for any purpose, as long as: * No original files are included * Its use is included in the credits.  1.01  Added GroupDial pose  Fixed Poser script issues
Dressy Purple for Karth's Dressy: A purple embroidered texture set for the Dressy outfit by Karth. Includes displacement and specular maps for detailed renders. ======================================Requirements: -Little One-LittleOne Dressy
Mikiko for Miki2: Miki2's little cousin is back from the big city and is looking for some fun! Mikiko is spry, mischievous, and has an unbridled imagination.Mikiko is compatible with both Poser and Daz Studio via Miki2 Ultimate Morphs setup. She's also usable as a "merchant resource" for creating your own young characters for Miki2! (See readme for details)Package Details: -Mikiko character pose -Miki Reset pose -"Hair Fit" pose for conforming and prop hair -"!Apply JPs to clothes" pose======================================Requirements: -Miki 2.0-Miki2's Ultimate Body Morphs & Ultimate Head Morphs<a href="http://www.sharecg.com/v/75390/view/11/Poser/Miki2-Ultimate-Morphs-setup-Update-1.01">Miki2 Ultimate Morphs setup</a>
G2 Girls for G2 Sydney, Jessi & Olivia: The G2 lady's little cousins are back and taking over the playground!Meet Ollie, Sydnie and Jessie. Ollie is sweet and sassy, Jessie's kind of shy, and Sydnie is bit of a rebel.G2 Girls is compatible with both Poser and Daz Studio via G2 Females Ultimate Morphs setup. They're also usable as a "merchant resource" for creating your own young characters for the G2 female figures!Package Details: -"Ollie & Sydnie" and "Jessie" character poses -Reset poses for Olivia, Syney and Jessi -"Hair Fit" pose for conforming and prop hair -"!Apply JPs to clothes" pose======================================Requirements:-G2 Jessi, G2 Olivia or G2 Sydney-Sydney Ultimate Head Morphs or Jessi G2 Ultimate Head Morphs-G2 Females Ultimate Body MorphsG2 Females Ultimate Morphs setup
Miki2 Ultimate Morphs setup (Update 1.01): PMD setup for DazStudio3 and DazStuido4. Compatible with Poser 7 and higher  DazStudio since version 4.5 hasn't been able to import morphs from PMD files. As a workaround, I've created a set of support files that will load the original figure and automatically apply the matching PMD morphs. DS users will want to download this patch for Miki2 as well:http://www.sharecg.com/v/75385/browse/21/DAZ-Studio/ObzPatch-V2-for-DS3-DS4 NOTE FOR POSER USERS: Even though PMD setup is not required for Poser users, the included fixes for several deformer issues are. As an added bonus, PMD setup allows the figure and morphs to be loaded quickly in a single step. In later versions of Poser, the morphs are not saved correctly in scene files if the Use external binary morph targets option is selected (General Preferences, under the Misc. tab). I recommend setting Use file compression instead. If you wish to use the "binary morphs" option, first save the scene with the option unchecked, open the scene again and then enable it. The morphs should then save correctly. ======================================Requirements: Miki 2.0 from cotentparadise.com Ultimate Body Morphs for Miki2 & Ultimate Head Morphs for Miki2 from runtimedna.com Update 1.01 (4-02-2015) Removed invalid morph groups from body morph loader.
G2 Females Ultimate Morphs setup (Update 1.01): PMD setup for DazStudio3 and DazStuido4. Compatible with Poser 7 and higher DazStudio since version 4.5 hasn't been able to import morphs from PMD files. As a workaround, I've created a set of support files that will load the original figure and automatically apply the matching PMD morphs. DS users will want to download this patch as well:http://www.sharecg.com/v/75385/browse/21/DAZ-Studio/ObzPatch-V2-for-DS3-DS4 NOTE FOR POSER USERS: Even though PMD setup is not required for Poser users, the included fixes for several deformer issues are. As an added bonus, PMD setup allows the figure and morphs to be loaded quickly in a single step. In later versions of Poser, the morphs are not saved correctly in scene files if the Use external binary morph targets option is selected (General Preferences, under the Misc. tab). I recommend setting Use file compression instead. If you wish to use the "binary morphs" option, first save the scene with the option unchecked, open the scene again and then enable it. The morphs should then save correctly. ======================================Requirements: G2 Females - Ultimate Body Morphs from runtimedna.com  At least one of the following figures and head morph sets: G2 Sydney (included with Poser 7 or higher) Sydney - The Ultimate Head Morphs from runtimedna.com G2 Olivia from cotentparadise.com  Sydney - The Ultimate Head Morphs from runtimedna.com G2 Jessi from cotentparadise.com (currently free for Poser users) Jessi G2 - Ultimate Head Morphs from runtimedna.com Update 1.01 (4-02-2015)  Removed redundant morph references  Fixed head morph groups. All morphs should load in the proper group (I hope).  
Night Slayer: Santa Baby: Turn EvilInnocence's innocent Candy Cane Elf outfit into a jumpsuit or top that can be paired with his other Night Slayers.Requirements:Candy Cane Elf for Victoria4, Dawn or Cookie by EvilInnocenceA "Night Slayers" outfit or texture by EvilInnocenceNote: "Night Slayers: Heet Textures" and "Night Slayers Textures for Boxer Shorts" are available for free from EvilInnocence.comPoser 9 or abovePackage Details:+ 36 Mat poses for separate parts of the outfit in red and black+  5 Hide mat poses for outfit customization+ 16 Complete mat pose presets.Includes two style options in red or black accents, with stitches or plain.BONUS:"Top" only mat poses that turns the outfit into a strapped top to pair with Night Slayers skirts and shorts!Promotional Credits:Figure & Clothing:Cookie by LittleFoxLucie by ClemmeCandy Cane Elf, Night Slayers: Vixen Skirt, Moxie Hair by EvilInnocence Scene & Props:Alley by inlitestudioLighting by Semicharm
S6 B1: Semicharm's Simple SSS Shader - Beta 1A: S6 is a SSS shader that's made to be simple and cross-compatible with different Poser versions, and yet versatile enough for use with many different types of lighting available in Poser. The Beta 1a preview release comes with skin shaders pre-applied to three Poser figures to make it easy to test how they render for you with little fuss. I'm still working out how to make them more general purpose, yet somewhat user friendly. Disappointed in how standard hairs look with S6, I started hashing out a basic cross-compatible hair shader for Poser to enhance straight hair textures too. It won't be part of the current beta, as I'd just started on it a few weeks ago, but so far it's certainly an improvement. In the meantime, I would appreciate any feedback on how well the skin shader works for you. :D Beta 1A (March 9 2019)Updated Teeth mat shaders (no new promos) Requirements:Firefly: Poser 9 or aboveSuperFly: Poser 11 or above Package Details:7 SydneyG2 mats:Both body texturesTwo eye colors8 JessiG2 mats:Both body texturesThree eye colors14 Roxie mats:Both body texturesFour eye colorsFive makeup mats All sets include three eye reflection and specular options. Note: JessiG2 was a previous freebie for Poser ownersRoxie is only available in Poser 10 or higher
Aurora: Aurora isn't your average runway model V4, but she is just as beautiful. Tested in Poser 5.
Valentine Secret for Boudoir Secrets: A texture set for the corset, panties & stockings of Daz3D's Boudoir Secrets
Bound for Victoria 4: Four chair bound poses for Victoria 4; all you need to add are the ropes and chair.
Free Asian Inspired Combat Poses for V4/V3: Karate style poses for Victoria 4, duplicated for Victoria 3.
Seduction: Poses for Victoria 4: Nine seductive Boudoir poses for Victoria 4
Jet Assisted Rubbish Bin: A highly modified rubbish bin (garbage can) enabling it of flight.
Innocent poses: I think I figured this one out! Enjoy and have fun with it! Test it for me ^^ And report any errors or if it doesn't show up.Hair and other items are not included.0.0 I saved it as a pose preset tell me if it's wrong!
Who cares pose.: A pose for your uncareful figures, this is my first time uploading so tell me if it's not working or anything. :)
ReadMeCube Release 2: May 17, 2010 pathname are fixed. br> This is release 2 of the ReadMeCube. I am putting this into public domain so you can modify it and distribute it. This new release has the ReadMeCube for figures and for poses.
Hissy Fits - For MilCat and Short Cat Furred: 2 Classical Halloween poses for Daz's MilCat or byTiny's Short Cat Furred available at Content Paradise. Enjoy or destory, Tabbycat
Black\Silver Hammer Tabards for M3 Normans: Two tabard textures for Loudres' M3 Normans outfit. Link is in the readme file. Inspired by a tabard in a video on youtube.com. In the video the hammer motif is black but this texture also has a silver hammer motif on the tabard. Tested in Poser 5 and Poser 6 only. Enjoy or destory, Tabbycat
Shield Textures for 12rounds' Morphing Shield: 14 shield textures for 12rounds' morphing shield at Renderosity. There are 12 Knight of the round table textures and 2 textures for King Arthur. These are designed to match the Tabard Textures for M3 Norman Outfit. Links to all you need are in the read me file. Tested in Poser 5 and Poser 6 only. Enjoy or destory, Tabbycat
M3 Tabard with Textures Poser 5/6 ONLY !!!!: Way too many problems are showing up with this. I was going to pull this but then I read through the comments so decided to leave it. I have not encountered problems with it but then I don't want it to do much in my renders. I am very happy with it. It was designed to fit over the 3dsc armor which is free and the link is in the readme file. It fits over M3 Tunic Pack with little to no sizing but it does have a few problems with fitting M3 thighs but I believe magnets can help with that. Animation with it is impossible for there are no dials or morphs for it. I use it for a standing M3 only which is all I need it for.
Basic Textures for Lourdes' M3 Normans Outfit: Basic Textures that look like chainmail or armour for Lourdes' Free M3 Normans Outifit. Tested only in Poser 5 and Poser 6. http://www.sharecg.com/v/27632/poser/M3-Normans-Outfit Get the outfit here. The boots are NOT included in this but everything else is including the shoes. Couldn't get a working pz2 file for the boots. Enjoy or destory, Tabbycat
Littlest Witch Text-Vol 2-FIXED: I fixed the icons so they show the red roses dress and not the pumpkin dress. Littlest Witch Textures Vol 2 4 broom textures 4 hat textures 1 red roses outfit textures 1 make up with green skin 1 green hair Requires: Littlest Witch by Art Collaborations and Littlefox's Gumdrops: Candy Links to both are in my read me file. Enjoy or destory, Tabbycat
Halloween freebie - textures for Littlest Witch: Halloween Freebie for PaganEagle;s Halloween party at DAZ This will only stay here until the end of November. Then you can get the same files in Vol 1, Vol 2, and Hair zip files here at sharecg. Do a search for tabbycat and you should see all of my offerings. Happy Halloween and days after, Tabbycat
Littlest Witch Textures - Vol 3: Two more textures for the Littlest Witch by Art Collaborations and Littlefox's Gumdrops: Candy. Links to both are in the readme file. Rainbow Witch Wood Witch 4 colorful bubbles Enjoy or destory, Tabbycat
Channing's - Toast and Jam with TC textures: Channing's - Toast and Jam with Tabbycat Textures. A charming model of a piece of toast with a pat of butter on a saucer accompanied by a matching Jampot and all it's parts. To finish this trio - a stick of butter on a matching butter plate. Looks good enough to eat !!!! Enjoy or destory, Tabbycat
Toast and Jam Texturing UV Maps FIXED: Toast and Jam Texturing UV Maps by Tabbycat Ok the first ones were incomplete but with a lot of help from DAZ forum these should work pretty good for you. Have fun.
Channing's Toast and Jam Texture Collection by TC: 3 sets of textured props for Channing's Toast and Jam -( free on sharecg.com) Classical Floral - Green Man - Floral Jam & Jelly This does require you install Channing's Toast and Jam. Please read the readme file if you run into problems with this. Enjoy or destory, Tabbycat
Littlest Witch Textures - Hair: 7 hair textures for the Littlest Witch from Art Collaborations and for Littlefox's Candy. Blonde, Brown, Black, Red, Pumpkin, Rainbow and Roses Hair. Here are links to both items. http://www.runtimedna.com/mod/bcs/index.php?ViewProduct=2865 For Gumdrops-Candy Base http://www.art-collabstore.com/index.php?main_page=product_info&products_id=147 Get the Littlest Witch here. Ok I took this project on cause all that was available were shaders and there were no texture files. So now there is at least the hair texture files for the Littlest Witch and soon there will be clothing textures and some props textures. The shaders work great but I like to look for stuff in the poses and props category and not the material room, which used to scare me. So these texture files are for those of us who may still be shy of the material room. Enjoy or destory Tabbycat
Ethin's PattyStacks (Upright Oddities) Fixed: cool models The pathnames have been fixed so it should load correctly in your Poser. The pathnames have been fixed so it should load correctly in Mac computers. These models are Ethin's and all I did was made them Poser 6 ready and Mac ready.
Littlest Witch Textures - Vol 1: A darling pumpkin texture for Art Collaborations' Littlest Witch. Socks Shoes Dress Hat 4 make ups I have more coming so this is Vol 1. Probably two more volumes. Enjoy or destory Tabbycat
CD2008 Scorpion Poses - Poser Ready: CD 2008 made some excellent poses for Noggin's Scorpion. It was only tested in DAZ studio. I tested the poses in Poser 6 and made a new zip file for us poser users. Enjoy or destory Tabbycat
Delphia-Textures-TC: I was messing around with beading the hair roses and I wondered what the hair would look like if I use beaded fabric on it. I was expecting a scene but as you can see you only get colors. It was a fun effect so I decided to share this. The only place you get to see the beaded fabric as it was meant to be seen is on the texture files which are located at runtime\textures\tabbycat\delphia-textures\ I used the lighting that comes with Daz's Affinity. Poser default lighting makes them too dark for my tastes. Enjoy or destory, Tabbycat
Rug Textures by Chamleon2002-Poser Ready: http://www.sharecg.com/v/35899/Poser/Bunny-Set The above link is a free bunny set that includes a prop rug. Chamleon2002 made some braided tug textures for that rug. So I made her rug textures poser ready. So download this zipped file if you want the textures to work in Poser. You will find them in the prop category of Poser. Tested in Poser 7 but I don't see why they won't work in other version of Poser. Enjoy or destory, Tabbycat
Witch Hunter Textures - Part 2: This requires DAZ's Witch Hunter V4 This zip file has textured props from the Witch Hunter outfit. You can get part 1 at sharecg.com under my account name Tabbycat 7 pumpkin textures * 1 broom * 1 witch hat * 1 top hat * all matching the part 1 outfit Enjoy or destory, Tabbycat
Witchy "As Above So Below" V4 pose by Tabbycat: Witchy "As Above So Below" V4 pose by Tabbycat This file only has one pose. If you want the textures, please surf my sharecg account name, tabbycat to find them. Enjoy or destory, Tabbycat2
Textures for Black Alyss Props: Textures for Black Alyss Props< br> 40 textures10 for the chair, 10 for the table, 10 for the vase, 10 for the rose You get Black Alyss Props at DAZ3d.com Link is in my readme file. Enjoy or destory, Tabbycat
Dog Poses for 3d Universe's Bacon: Bacon is a dog model and it is available at DAZ3d.com It didn't come with Poser pose files, only dial turns, so I made a few poser pose files for it. Enjoy or destory, Tabbycat
Reticule Textures -TC Updated All 6 now: Reticule Textures for The Ness's Reticule, a victorian beaded purse. http://www.nessrepros.co.uk Just arrow down or page down. The reticule, (free) is in the link called - Click Here For Needlework Page Second from the top is the reticule. Reticule is the word The Ness uses, not my word. I only know these to be called Victorian Beaded Purses. I have updated this file so that all 6 textures are now included. I also made some fancy icon buttons. Enjoy or destory, Tabbycat
18 Textures for Nursoda's Free Reipus: 18 Textures for Nursoda's Free Reipus I have a lot of Nursoda's items and I just love them. I love this Reipus that looks like an Ostrich and an anteater had a baby. You apply these textures via the Materials room but I have icons set up so it is just a matter of clicking. This model also comes with full riding gear and I will be making those available soon Enjoy or destory, Tabbycat
Black Alyss Prop Textures: Textures for Mada's Black Alyss Props. I call this my Fish Set. It is an oriental design of two fishes. You have to have Mada's Black Alyss Prop in order for this to work. http://www.daz3d.com/black-alyss-props A chair, table, vase and rose texture. Enjoy or destory Tabbycat
Textures for BA prop (chairs): You need Mada's Black Alyss Props in order for these chair textures to work. Get it at DAZ3d.com Tested only in Poser 7
More Poses for Poser 7's cat: More Poses for Poser 7's cat by Tabbycat 3 poses with 1 being previously released. Nature calling (was previously released) Comfortable OverRodentHold Enjoy or destory, Tabbycat
13 Textures for Sgreco1970's magazine prop: 13 Textures for Sgreco1970's free magazine prop. UPDATED Sgreco1970 also offers an object file of this prop and you get it herehttp://www.sharecg.com/v/40653/View/11/Poser/Sgreco1970s-Magazine-Model When you render it, make sure the render setting is high or they will look blurry. Enjoy or destory, Tabbycat
Hailey's Comet Poses: Hailey's Comet Poses. 16 new poses with 1 default pose. You get Comet http://www.renderosity.com/mod/bcs/index.php?ViewProduct=53011&keyword=Hailey%27s+comet You get Hailey http://www.runtimedna.com/Hailey-for-A3.html 16 poses for this mechanical horse with one pose for default. The 16 poses are: Flying,Flying 2,Jump,Jump 2,Kick 1,Kick 2,Kneeling,Low Fuel,Out of Fuel,Rearup,Sitting,Slippery,Stopping,Waiting,Waiting 2,Trot and 00 pose is the default pose. Enjoy or destory, Tabbycat
Python Poses - Wrap A Victim: UPDATED: 7 more poses added.
Witch Hunter V4 Textures - Peacock-FIXED: Witch Hunter V4 Textures - Peacock Textures. Rich Green velvet with peacock images embroidery. Rich blue velvet lapels with berrys and leaves embroidery. The shirt and skirt textures were designed to imitate the peacock tail feathers. Enjoy or destory, Tabbycat
CatGirl A3 Poses - UPDATED: CatGirl A3 Poses for A3 CatGirl. My first release, because I couldn't get the tail poses to work with the icon, I had to set it up so you had to manually turn dials to the numbers in my readme file to get the tail posed. I use Poser 7 now and have more experience and I have successfully made icons that pose the tail. The first release is still available in case you want those numbers. This update is for those of us who just don't want to turn the dials for the tails pose. Enjoy or destory, Tabbycat
Koshini FREE poses plus animation: Two free poses for LLF's Koshini character and the outfit Lady Of The Manor. Plus an animation using those two poses. For more poses for Koshini and the Lady Of Manor outfit, please visit my Renderosity store. http://www.renderosity.com/mod/bcs/index.php?ViewProduct=79536&vendor=336563 Enjoy or destory, Tabbycat
VI-Lighter Brighter Textures: VI - Victorian Innocence @ Runtimedna.com The VI textures are way too dark and gloomy. The add on packages, again way too dark and gloomy. Maybe Victorian times were dark and gloomy but this is 2010 and this outfit looks great in lighter brighter textures. This outfit is hard to texture so there is only one complete set of textures. Now beware - Renderosity rejected this texture saying it was below their standard high quality and gave me no chance to improve the quality which I feel was wrong of them. But you get these textures for free. Lovely yellow and red flame tones that are definitely a lighter brighter look to VI. Enjoy or destory Tabbycat
Lil Bunny Foo Foo by Tabbycat: Lil Bunny Foo Foo by Tabbycat This is a toon bunny prop which is static. Static means it is not rigged so parts of it do not move. It comes with a toon fir tree, which is static also. These are like lawn ornaments. The bird in the promo image is available in LilBirdiebyTabbycat you can get here at sharecg or in the free section of Renderosity. Enjoy or destory, Tabbycat
Vila-Trailer Trash Fashions: Vila-Trailer Trash Fashions 8 second skin textures for Nursoda's Vila (@ Renderosity) Plus 2 poses. Leaning on Trailer and Sit & Smoke Links to items used inb readme file Enjoy or destory Tabbycat
Chamber Pot - 1st release: What is a Chamber Pot ? Glad you asked. It is usually a porcelain pot that held urine and was kept under the bed until it got emptied in the morning. These were at one time very popular with the kings and queens of Europe and when the American west was being settled most folks had only outhouses and a long trek through deep snow was not appreciated at 2 am so the Chamber Pot became very popular. These may still be in use today. They all came with a lid to control vapors. I got to use one when I visited my grandparents on their farm which did not have an indoor bathroom. I was seven years old. I found the one I used to be very comfortable and steady. Everyone had one under their beds and it was no problem taking yours to the outhouse in the morning and emptying it even for a kid. Please let me know if you run into any problems with this model. There are a few flaws to this release now but in the release I am making for purchase, they will be all corrected. The biggest flaw is this pot won't properly take a patterned texture. But using the colors in the Material room it looks great. I have multiple texture zones so please play with color. You get: Chamber Pot Bowl Chamber Pot Lid Textures in the Materials Room under Chamber Pot Enjoy or destory, Tabbycat
Lil Birdie by TC: Lil Birdie by Tabbycat is a static prop. This means that none of the parts move. It's lawn ornaments. Looks really cute in a wreath or on a tree. Hanging out on a park bench or under the bench eating crumbs. Enjoy or destory Tabbycat
Freebie - SwashBuckler Boots Textures: 1 free set of textures for the Swashbuckler Boots Get the SwashBuckler Boots http://www.daz3d.com/i/3d-models/-/swashbuckler-boots?item=10776&_m=d More Textures are available in my Renderosity store http://www.renderosity.com/mod/bcs/index.php?vendor=336563 More links in readme file for products used in promos Enjoy or destory, Tabbycat
GrapeVine Pattern for Fungi Dishes: GrapeVine Pattern for Fungi Dishes (FungiDishes available in free section of Renderosity.com) http://www.renderosity.com/mod/freestuff/details.php?item_id=59319 Also, you get 4 textures for the jam jar I can not legally distribute Cougar999's FungiDishes files so I can not offer a poser ready zip file for FungiDishes. If you want these to work you have to read my readme file to place the FungiDishes files where they need to be. Instructions are simple and short. My texture zip file is poserready, just unzip it to your c:\poser http://www.renderosity.com/mod/freestuff/details.php?item_id=59319   Free Fungi Dishes   Enjoy or destory, Tabbycat
5 More Textures for the free Fungi Dishes: Edited Nov 7, 2013.  Corrected pathnames in pz2 files.5 more textures for the free Fungi Dishes avail @ Renderosity.com free section Acorn Pattern Elegrant Pattern Grape God Pattern Holiday Pattern Tea Time PatternNot all are shown Please read my readme file so you can get the FungiDishes files set up in Poser. http://www.renderosity.com/mod/freestuff/details.php?item_id=59319   Free Fungi Dishes Enjoy or Destory, Tabbycat
Spices & Teas for the free Fungi Dishes: Spices & Teas for the free Fungi Dishes available at Renderosity.com free section Faerie Dust Hot Faerie Dust Mild Wild Mushroom Powder Green Leaf Tea Spice Wild Garlic Powder Hazle Nut Bitters Autumn Red Leaf Tea Thyme Nutmeg Red Berry Acorn Tea Fungi http://www.renderosity.com/mod/freestuff/details.php?item_id=59319   Free Fungi Dishes
Nature Calling Poser for Poser 7's cat: Nature Calling Poser for Poser 7's cat I found this Poser 7 cat and there are very few poses for it so I wanted a curled up position. Well, as I was working on that, this pose was perfect for a Nature Calling pose, so I thought I would share this with you. I have had a lot of cats in my life and some cats just insist on nature calling wherever and this is the last pose they do before getting thrown out the door and across the yard, lol. I am kidding, I set them gentle outside.
Reipus Riding Gear Textures: 5 complete sets of textures for Nursoda's Reipus Riding Great that comes with the free Reipus. http://klopfholz.de/ This is Nursoda's web site. If you want textures for Reipus I made 18 and you get them here at sharecg.com Enjoy or destory, Tabbycat
Kindred No Vest Textures: Required: RP's Kindred available at Renderosity.com This was a request and here's my attempt at making the vest unseen. It is a great vest but for some outfit you just want the jacket. It is not a perfect unseen method though. You can get a ghostly shadow of the vest and it's buttons with some lighting. You apply this in the material room. Just click on the icon is all you need do. Read my readme file for where stuff is. Enjoy or destory Tabbycat
7 Poses for DAZ's Octopus: 7 poses for DAZ's Octopus and 1 victim pose for DAZ's David. Both are easily found with DAZ's search engine and my readme file has links to both. Enjoy or destory, Tabbycat
Indian Painted Pony - MilHorse Texture: Indian Painted Pony - MilHorse Texture. Added four more textures to this file, so you need to redownload this if you want the other textures. Enjoy or Destroy, Tabbycat
4 Textures for DAZ's Christmas Rocking Horse: 4 Textures for DAZ's Christmas Rocker, a wooden rocking horse. Link to this model: http://www.daz3d.com/i/3d-models/-/wooden-rocking-horse?item=3893&_m=d Black Beauty Cotton Candy Indian Painted Pony Victorian Floral Enjoy or destory, Tabbycat
Textures and Poses for BJD: 1 set of textures for the clothes that come with Maya's Ball Joint Doll. A lovely red velvet texture with green and gold accents, a great holiday look. Including 15 poses for the doll Requires: Maya's BJD http://www.renderosity.com/mod/bcs/index.php?ViewProduct=51396& Enjoy or Destory, Tabbycat
Zlata Rag Doll Textures - 2008 Xmas Party: Zlata Rag Doll Textures. Xmas Present 2008 This was to be released during a Christmas Party held in the DAZ forum but I can't get solid info on that so I decided to release my gifts now. It was a while since I made these textures but I believe there are six of them. Enjoy or destory - Happy Holidays, Tabbycat
Worm Boy for Jack Worm - 2008 Xmas Party: Worm Boy for Jack Worm. Four textures for the toon Jack Worm. I made these for the 2008 Christmas party but I can't get solid info on that so I decided to release my gifts now Enjoy or destory - Happy Holidays Tabbycat
Victorian Era Dress Textures - 2008 Xmas Party: Victorian Era Dress Textures - 2008 Christmas Party. There are 7 textures for the Victorian Era dress. I made these textures for the 2008 Christmas Party but I can't get solid info on that party so I decided to release my gifts now. Enjoy or destory - Happy Holidays Tabbycat
Plushies Quinn Poses - 2008 Xmas Party: Plushies Quinn Poses - 2008 Christmas Party I made these for the 2008 Christmas Party but I can't get solid info on that party so I decided to release my gifts now Enjoy or Destory - Happy Holidays Tabbycat
Fairy Dresses V3 MCD - 2008 Xmas Party: Fairy Dresses V3 MCD - 2008 Xmas Party I made these for the 2008 Christmas Party but I can't get solid info about the party so I decided to release my gifts now Enjoy or destory - Happy Holidays Tabbycat
Dark Piano Textures - 2008 Xmas Party: Dark Piano Textures - 2008 Xmas Party I made these for the 2008 Christmas Party but I can't get solid info on that party so I decided to release my gifts now. Enjoy or destory - Happy Holidays Tabbycat
Easter Egg Textures for the Carrie Dress: 6 Easter Egg Textures for Daz's Carrie Dress. Enjoy or destory Tabbycat
Textures for Samanthie's Free A4 Dress: 9 textures for Smanathie's free A4 Dress found in the Daz forum free depository area. Readme file has link to the dress.
Samanthie's A4 Dress Textures: 3 more textures for Smanthie's free First Impressions A4 dress. You can find it on Daz forum in the Free Depository Area. I made 9 other textures for this dress, just look under Tabbycat to find them. Enjoy or destory, Tabbycat
Textures for the Carrie Dress: 6 textures for the Daz Carrie Dress. enjoy or destory, Tabbycat
A3 Sagittarian Textures: A3 Sagittarian Textures for Out of Touch's A3 outfit sold at DAZ. 7 colorful textures. enjoy or destory, Tabbycat
Elephant Rainbow: Requires SilverKey3D Africa Elephant available at DAZ. Link to it in readme file. 9 textures for the elephant. These elephant textures go very nicely with my Howdah textures which is also free. Enjoy or Destory, Tabbycat
Howdah Textures 2: 6 textures for Noggin's Howdah Set and textures for SilverKey3D's African Elephant. enjoy or destory, Tabbycat
Old Magic - textures for V4 Sorceress: One magickal symbols fabric with orange accents for Daz's V4 Sorecess. http://www.daz3d.com/i/3d-models/-/the-sorceress?item=9388&_m=a Enjoy or destory, Tabbycat
JTrout's Mouse Poses: UPDATED******************Mouse Trap links in readme file***** Now 16 poses for the mouse made by JTrout plus two animations. Please read my readme file. This zipped file only has the poses for the mouse. The mouse trap is by Thornworks and it is free. JTrout mouse is free but is hard to find. As far as I can determine this mouse was still available in 2004 and if you were around then, then you probably have it in your collection. Again, please read my readme file. http://www.faeriewylde.com/FW3/index.php?topic=505.0 This is a mouse trap with textures by Thornworks. It is free. It is posable http://www.renderosity.com/mod/freestuff/details.php?item_id=877 This is am mouse trap without textures. It is free. It is posable. Have to read the readme file to set it up so it works in Poser. Enjoy or destory, Tabbycat
Brick Wall with Ad textures.: Brick Wall with Ad textures is a zipped file of only the jpg files. You apply them in Poser's material room if you remember where you unzipped them to your hard drive. Reading the readme file will greatly ease your understanding and use of these. These textures were created for a house model not yet completed. http://forum.daz3d.com/viewtopic.php?p=1950370#1950370 Well I messed up the first walls with ads in the alignment. I have corrected them, so just redownload this file to get the corrections. It never pays to hurry but I am in to much of rush to realize that. Enjoy or destory, Tabbycat
Band Aide Box - Poser Ready Files: This file only contains the png and pp2 files for Poser. It does not have any of the object or texture files. Get those at the below link from Turbo Squid. Required: Turbo Squid's Band Aid Box - object and textures files only http://www.turbosquid.com/3d-models/maya-band-aid/444137 I strongly urge you to read my readme file so you get links and instructions that will make installing go much faster. Enjoy or Destory, Tabbycat
Textures for Nursoda's SpeCtor: 10 humorous textures for Nursoda's SpeCtor. 2 poses, one for SimonG2hair one for SpeCtor so the hair sits on the head. You get SpeCtor at Renderosity.com http://www.renderosity.com/mod/bcs/index.php?ViewProduct=79101&keyword=spector Enjoy or destory, Tabbycat
V4 Egyptian Textures for V4Egyptia Updated: Now 8 Egyptian textures for the free V4Egyptia dress. http://www.sharecg.com/v/36327/Poser/Egyptia-dress-for-V4 Enjoy or destory, Tabbycat
Swing Set by Teri - POSES: 4 poses for DAZ's kids4 base. Required: Daz's Kids 4 base http://www.daz3d.com/i/shop/itemdetails/?item=9404 Swing Set by Teri http://www.sharecg.com/v/41261/Poser/Swing-Set-by-Teri Climbing - Sliding - Caught Ankle Crying - Tummy Ride Enjoy or destory, Tabbycat
BackYard Textures for the free Backyard Prop: Floral Shopkeeper BirdsandFruitsGet the model http://www.sharecg.com/v/47796/browse/11/Poser/BackYard-Scene-Prop Three textures for the free Backyard Prop. The link is in my readme file and for your convenience here's the link here. http://www.savefile.com/files/2166863 I use FireFox for my browser and I can get this file just fine. Enjoy or destory, Tabbycat
PUMPKIN by Tabbycat: Pumpkin by Tabbycat is a prop of a pumpkin. I made six textured props, a texture stem prop and a puke puddle prop. One of the pumpkin looks like it is throwing up and you need a puke puddle for that. The stem is for all the pumpkin props. None of the items are parented nor are the conforming but they are very easy to drag with your mouse to where you need them to be. I included the UV map of the stem and the pumpkin in case you want to do some texturing. At the time I was zipping this file up I could not find the puke UV map. Enjoy or destory, Tabbycat
Dollz Shoes TexturesforPokeyDots LittleDollzShoes: Six Textures for Tate's Little Dollz base figure and for Pokey Dot's Little Dollz Shoes. Textures include: Tiger shoes, leopard shoes, zebra shoes, oriental shoes, hogwarts shoes, indian shoes. Get the Little Dollz from RuntimeDNA.com http://www.runtimedna.com/LittleDollz.html Get PokeyDot's shoe from sharecg.com http://www.sharecg.com/v/37959/Poser/Little-Dollz-Shoes Emjoy or destory, Tabbycat
Granny Weatherwax Morph for V4: DAMSEL1 and Tabbycat's Granny Weatherwax morph for V4.  ( Zip now has pathnames 10/28/2013) Readme file has UPDATED links to hair and clothing. This file only has the morph. Special thanks for DAMSEL1 for her excellence in making the INJ and REM making it possible to share this freebie with you legally. Be sure to say thanks to Damsel1. Enjoy or destory Tabbycat
Introducing the ReadMeCube: May 17, 2010 PATHNAME WAS FIXED Introducing the ReadMeCube This is a prop that can bring the info of your readme file into the work area on a cube or square. I came up with this idea when I was being frustrated by not finding a readme file and got to wondering if there wasn't a better way to get the readme info. If you can texture, you can use this ReadMeCube with ease. Even folks just learning will find this easy to learn to texture. Enjoy or destory, Tabbycat
A3 Cat Girl Poses UPDATED: The final four poses are now in this file for a total of ten poses. This is the last update These are poses for A3 Cat Girl. The model can be found at DAZ3d.com. I just bought this older model and I thought the poses in the promos came with this model but they did not. Then I thought I had to buy the poses but none were available. So I sat down and posed A3 like the promo poses. This update now includes ten poses that are shown on this model's promo. Well as close as I could get to those poses. Enjoy or destory, Tabbycat
GW's Hat Pin model with 6 textures.: Bendable GW Hatpin 3d model with six textures. Reading the readme file can be helpful. This is my first 3d model and it's a character not a prop just for the learning experience mostly. It starts out in your work area straight and brand new looking and you can move it by clicking the bead or ball to keep it straight. But on the metal stem you can bend to get that well used look, like you'd expect them to look after Granny Weatherwax uses them. Plus it's nice to be able to bend it so it gets out of the ear or side of the face, lol. Enjoy or destory, Tabbycat
MagicalWitchHat-TabbyCat-1st Release UPDATED-2: Ok, I have added the poses and the textures for this hat. Just download the file. Might be a good idea to delete any prior downloads for this MagicalWitchHat-TC for this last update is complete. There will be a release 2 but will be released on it's own. ********************************************* Grab the cone or the brim of the hat and drag it left or right and you can bend them. Select a bone in the hat and make it smaller or larger with the size dial Larger gives you a bulb effect. Smaller makes an indentation. This is a 1st release and it's complete. Happy Halloween, Enjoy or Destory, Tabbycat
Poopy Face - Thinker Texture Updated 11/25/2015: This was uploaded in 2010.  In 2014 -No more freebies, except for the thinker pose by Whipporwill and this Poopy Face texture.  (Stonedboys - more textures are still free and are here on sharecg.com) This works really well for just Michael 4 but in case you want the Freak I have a link to that too.  http://www.daz3d.com/michael-4-base-male-3d-model   Michael 4 base You also need the M4 morphs ++ too if you want the Freak(link in readme)     http://www.daz3d.com/the-freak-4-base    http://www.daz3d.com/poser-pigeon-daz-dove       Whipporwill's Thinker Pose (still free) http://www.freeposes.net/index.php?   When you want your Thinker statue with more realism, this is the texture for you. You will need DAZ3d's Michael 4 base- Whipporwill's Thinker Pose - This texture - Noggins Dove\Pigeon.   If you want the Freak look, then you need Freak 4 base and also M4 Morphs + +.   My readme file has been updated with all these fresh links.    http://www.sharecg.com/v/41228/Poser/StonedBoys-ThinkerTextures Enjoy or destory,  Tabbycat
Backyard Textures Copyrighted: REQUIRED: Backyard prop and Boundless's Easy Textures. Links to both in readme file. http://sharecg.com/v/47796/view/Poser/BackYard-Scene-Prop Here's the link that is in the readme file for your convenience. These are only poser files that will work if you have the free backyard prop and the purchased Easy Textures by Boundless. If you have other textures you are welcome to use these files but you will need to change the filenames or pathnames telling poser where to find your textures. I use FireFox for my browser and I can download just fine. Enjoy or destory, Tabbycat
Ballet Poses for Koshini: 10 poses of Ballet for Runtimedna.com's Koshini. Required: Koshini http://www.runtimedna.com/Koshini.html Items in my promo Koshini Clothing Pack 6 - Music Box Dancer http://www.runtimedna.com/Koshini-Clothing-Pack-6-Music-Box-Dancer.html Arabesque (textures for Music Box Dancer) http://www.runtimedna.com/Arabesque.html I downloaded ballet images and then posed Koshini as close as I could without mesh problems. The promo has the image I worked from and then the pose I made. Enjoy or destory, Tabbycat
McGyver's Billboard Props: McGyver has given me permission to offer these textures\props in my sharecg account. You need McGyver's Faded Old Billboard (free) before these will work. http://www.sharecg.com/v/40957/Poser/Faded-Old-Billboard. These will overwrite some of McGyver's files so you need to know that before installing. Poser 7 tested. Enjoy or destory, Tabbycat
Infamous---Beaded-Floral-Textures-linkfixed: REPOSTED - June 28, 2009 Textures for LLF Infamous outfit A3http://www.runtimedna.com/Infamous-Bundle-for-Aiko3.htmlEnjoy or destory Tabbycat
A3 CatGirl Adjusted Textures for A4 CatGirl: A3 CatGirl Adjusted Textures for A4 CatGirl by Tabbycat A3 CatGirl came with some great textures but A4 CatGirl did not include them. So I adjusted the textures so they fit A4 Catgirl and have 10 poses for the body and 11 poses for the tail. Also there is a great hair model that came with A3 and it was not included in the A4 release. I made three textures for the hair. I really enjoyed this project but if you find something is not working properly please leave a comment so I can fix it. Enjoy or destory, Tabbycat
Diamond_TackTextures-2: More textures for the Diamond Carousel Pack. You need the Diamond horse model and the Carousel pack. Links to both items are in the readme file. 5 more textures plus 1 updated green texture for the first texture pack. First textures avail here at sharecg under tabbycat and the link is in the readme file. Enjoy or destory Tabbycat
FIXED-Witch Hunter Textures - Part 1: June 8,2009 update Oh man sorry but the pathnames were messed up in the zipped file I fixed it and it should now install in the proper subdirectories. Again, very sorry for this. Just redownload the file, the filename stays the same so just let it overwrite the one you have. ************************************************ Textures for DAZ's Witch Hunter Textures. Part 1 of 2 This file has textures for the clothes. Part 2 will be textures for the props. This zipped files contains textures only for: 1 Jacket 1 corset 1 pair of boots 1 pair of pants 1 shirt 1 skirt Part 2 will have textures for the Broom, witch hat, top hat and the three sized pumpkins. Enjoy or destory, Tabbycat
Diamond-TackTextures: 6 Textures for LFF's Diamond Carousel Requires: Diamond (horse model) and the Diamond Carousel Pack available at RuntimeDNA. Links to products in readme file. Enjoy or destory Tabbycat
Sgreco1970's Magazine Model: Sgreco1970 gave me permission to host his magazine model in my sharecg account. Thank you so much Sgreco1970.
PythonPoses-SnakeDrape: PythonPoses-SnakeDrape. Required: DAZ's Morphing Python and Aiko 4 These poses are non-conforming and they don't get attached to Aiko 4 Just snake poses, none for Aiko 4 If I ever figure out how to conform the snake I will make a second release Snake Drape is a snake wrapped on a human model for a photo-shoot. Enjoy or destory, Tabbycat
StonedBoys-ThinkerTextures UPDATED 11/25/2014: This was uploaded in 2010.  It's now 2014 and the original links do not work.  I am giving you fresher links to items that will work well with this  texture(s) in my new readme file . These do work very well with Michael 4 with or without Freak 4 overlay.  You can still get Michael 4 at DAZ3d.com but as a purchase, no longer free.  Also Noggin's Dove is also a pigeon model.  The readme file has been updated  to reflect new links to the items. (Poopy face textures also works very well with Michael 4 with or without Freak overlay.) The free thinker pose is still available and works well with M4 BUT you now have to adjust the arms but that is easy to do in Poser 9 anyway.   Enjoy or destory, Tabbycat  
Support files for texturing MechaWasp: Updated: I am making UVmap and objects and other people want them so I just jammed what I am working with in this zip file. You are welcome to search through it. MechaWasp is a free model that comes with no textures. I used UVmapper to get a UVmapped object and bmp files. Got a request for these basic files so I zipped them up and put them here. I have included a couple of sample files for how to color the bmp file. Please read the readme file. If you want them, download them but these files are not for everyone cause they don't work unless you make them work. Cheers Tabbycat
Tumbleweed and Doc Cab Animation Files: Animation view is now working.  Links to all items in readme file work as of Nov 5, 2013This is fun to play with. You get a complete set of animation files for the Tumbleweed toon horse, the harness, and the Doctor Cab.  Links to all items in readme file. Tumbleweed walking and pulling the doctor cab. If you want to tweak anything you have all the files so you can easily do that.      http://www.daz3d.com/i/3d-models/-/tumbleweed-the-toon?item=3441&spmeta=ab&_m=a   Tumbleweed     http://www.daz3d.com/doctor-cab  but check out the 3djoji link to see if Doc Cab is free.    http://3djoji.com   To see items click on Oldies.  Must visit 3djoji's website to see if he is still offering the doc cab and Tumbleweed's harness for free.  3djoji is the creator to Doctor Cab and the Tumbleweed harness.  You might have to contact him and ask for the harness.  Grab the Tumbleweed poses too.  Enjoy or destory, Tabbycat To see animation click here
Diamond Bones (Inside the horse) Textures: Not really an accurate placement of the bones, guts or muscles but never the less cool textures.  All hand drawn in Paint Shop 7 then laid down on Diamond's original texture.  Required -  Lady Littlefox's Diamond horsehttp://www.runtimedna.com/Diamond-Base-Character.htmlCheck out the Horse Inside Out website.http://www.horsesinsideout.com/pictures.htmlTabbycatUploaded November 18, 2013  Uploaded: November 20, 2013
JeanOlogy 01 for DY Chic Halter Dress: You can find the dress here http://www.sharecg.com/v/35879/Poser/DY-Chic-Halter-Dress-for-V4
V3 HEAD MORPHS PACK: These are 9 head morphs for v3, Liv is the one I used in the second pic. Salma is the one on the third. I hope you like it.
Black Leather for DY Mistyc Dreams: Required DY Mistyc Dreams HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=72175&vendor=370376
Poses for Chalet De Sevilla: This poses will take you to a specific place without altering the pose your figure already have and it will help you to use the Chalet De Sevilla at it full potential, It also includes for Daz Studio camera presets for each pose .I hope you find this useful .
FREE poses for V4 and the Sexy Jeweled Birthstones: 5 poses for V4 11 poses for the Over Dress 5 poses for the Mini Dress Outfit available here http://market.renderosity.com/mod/bcs/index.php?ViewProduct=66211&vendor=370376
DY Fantsy VERONA Colors: This is a set of 14 textures with their mat pose for the VERONA hair (DAZ) I hope you like it.
Ole Xmas 02 and Winter: This is a Christmas texture for my Ole Dress for V4 available here http://www.renderosity.com/mod/bcs/index.php?ViewProduct=65807&vendor=370376 I hope you like it.
Snowflakes for Feathers Crown: THIS IS A SNOWFLAKES TEXTURE FOR THE FEATHERS CROWN AVAILABLE IN MY DY FANCY ELEGANCE FOR V4 PACKAGE, HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=67526&vendor
SAN VALENTINE for SEXY JEWELED OUTFIT: THIS IS A SAN VALENTINE TEXTURES FOR SEXY JEWELD OUTFIT AVAILABLE HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=66211&vendor=370376
CHRISTMAS 1 for DY Alba Outfit: You need DY Alba Outfit for this to work.http://www.renderosity.com/mod/bcs/index.php?ViewProduct=77448&vendor=DiYanira DOWNLOAD HERE http://www.renderosity.com/mod/freestuff/details.php?item_id=62659 I HOPE YOU LIKE IT.
New Style for DY Flirty Outfit: Texture Set for DY Flirty Outfit AVAILABLE HERE http://market.renderosity.com/mod/bcs/index.php?ViewProduct=62805
Ole Xmas 01: This is a Christmas texture for my Ole Dress for V4 available here http://www.renderosity.com/mod/bcs/index.php?ViewProduct=65807&vendor=370376 I hope you like it.
PASSION for DY ALBA Outfit: You need DY ALBA Outfit for this to work http://www.renderosity.com/mod/bcs/index.php?ViewProduct=77448&vendor=370376
4 July Sexy Jeweled BirthSTone: 4 of July texture for Sexy Jeweled Birthstones for V4 AVAILABLE HERE http://www.deviantart.com/users/outgoing?http://www.renderosity.com/mod/bcs/index.php?ViewProduct=66211&vendor=370376
4 July 2010 for OleV4: Required Olé for V4 http://www.renderosity.com/mod/bcs/index.php?ViewProduct=65807&vendor=370376
4 of July for OleV4: This is a texture for Ole for V4 AVAILABLE HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=65807&vendor=370376
4 July Sensuel Romance Outfit For v4: Required Sensuel Romance Outfit for V4 HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=72711&vendor=370376
Christmas-1 for Free DY Chic Halter Dress for V4: Dress available here in my gallery, I hope you like it.
4 July 2010 for DY Flirty: Required DY Flirty For V4 available HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=62805
ARAGORN for M3: I made this like 4 years ago, I thought it's about time to share it. You need M3 head morphs for this to work. I hope you like it.
SAN VALENTINE for OLE Outfit: This is a San Valentine texture for my Ole Dress for V4 available here http://www.renderosity.com/mod/bcs/index.php?ViewProduct=65807&vendor=370376
Steampunk for DY Flirty Outfit: You can find the outfit HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=62805&vendor=370376
XMAS 1 for Modern COWGIRL: YOU NEED MODERN COWGIRL FOR V4 FOR THIS TO WORK, AVAILABLE HERE http://market.renderosity.com/mod/bcs/index.php?ViewProduct=83567
Purple Mix for DY Diana Dress: You need the purchase of DY Diana Dress for this to work here http://www.deviantart.com/users/outgoing?http://www.renderosity.com/mod/bcs/index.php?ViewProduct=64210&vendor=370376#.
SAN VALENTINE textures and poses DYFancy Elegance: SAN VALENTINE textures and poses for DYFancy Elegance available HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=67526&vendor=370376 This are the poses used in the promo of this outfit. I hope you like it.
XPACK 1 (BROKEN MIRROR) FOR MY PLACE-DRESSING AREA: THREE BROKEN MIRROR, ONE STYLE FOR THE ATOMIZER AND PERFUME BOTTLE AND ONE V4 POSE. YOU NEED MY PLACE: DRESSING AREA, FOR THIS TO WORK EXCEPT FOR THE V4 POSE. HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=81033&vendor=370376
Leather & Feathers for DY Halter Dress: Textue of leather and feathers for Halter Dress available HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=61366&vendor=370376
Bridal for DY Mistyc Dreams: You need DY Mistyc Dreams outfit, for this to work, available HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=72175&vendor=370376
Poses forS-Romance chic duster: Poses for the duster of my new package DY SensuelRomance available here http://market.renderosity.com/mod/bcs/index.php?ViewProduct=72711&vendor=DiYanira
GIRL 4 & ELITE UPDATED CR2 FOR DY FLIRTY OUTFIT: UPDATED CR2 FOR SUPPORT GIRL 4 BASE & ELITE BODY OUTFIT AVAILABLE HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=62805&vendor=370376
DY Diana Outfit V4 zip 1: The zip did not wanted to upload in full, so i divided the obj and cr2and prop in this zip and the textures in the next one. THE FULL ZIP YOU CAN FIND IT HERE http://fav.me/d3gmmfx Comforming dress for V4( UPDATED for Elite and Girl 4) Comforming dress for A4 Hat prop 12 textures 04 TR Mat Pose Presets This is one of my firsts dresses it has some morphs but not as many as I do now, but has all the Full body Morphs of V4, some partial morphs and the one of Pose and Movements . Happy Rendering
CASANDRA V4 Character: CASANDRA V4 *Casandra Head INJ & REM *Casandra Head2 INJ *Casandra Body INJ & REM *Casandra Full INJ *01 MAT Default Apply *08 MAT Eyes *03 Mat Cornea TR *02 Mat Eyelashes Tr *02 Mat Eye Sciera *12 MAT Makeup *12 Mat Lips *01 Mat Tyger Face *01 Skin Flowers Tatoo *01 Skin Flowers (no colors) Tatoo *01 Skin Suit 01 a *01 Skin Suit 01 b * 52 Poser Material poses .Pz2
GARDEN for DY BELLE: Dress AVAILABLE HERE http://www.renderosity.com/mod/bcs/dy-belle/86914
IN THE BEGINING for Henesis Dress (Bengal Tiger): Next in the series BENGAL TIGER. HENESIS DRESS for V4-A4-G4-S4-SF4-Elite http://www.renderosity.com/mod/bcs/index.php?ViewProduct=93240&vendor=DiYanira
Violet Prom for OLE V4: OLE Dress AVAILABLE HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=81610&vendor=370376
ESPLENDEROUS EXTRAVAGANZA zip 1-2: Required Products: Extravaganza by Powerage It works in Poser 5 or 6 and DAZStudio It include the following content: 09 textures for the Dress 09 Textures for the Hat 09 Textures for the Parasol 09 Textures for the Purse 07 Textures for the Ornaments Dress Spread OFF mat pose Lace Transparencies mat poses for the Dress, Hat, Parasol
Chic Lady for DY Fancy Elegance: You need DY FANCY ELEGANCE AVAILABLE HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=67526 I hope you like it.
AMAZONA for Dayanara 'Belly Dance Outfit': Required Dayanara 'Belly Dance Outfit for V4' http://www.renderosity.com/mod/bcs/index.php?ViewProduct=73508&vendor=DiYanira This is a amazone texture for the outfit.
Camouflage for DY Mistyc Dreams: Required; DY Mistyc Dreams for V4 http://www.renderosity.com/mod/bcs/index.php?ViewProduct=72175&vendor=DiYanira
DY Diana Outfit V4 zip 2: The zip did not wanted to upload in full, so i divided (the obj and cr2and prop) and the textures are in this zip. THE FULL ZIP YOU CAN FIND IT HERE http://fav.me/d3gmmfx Conforming dress for V4( UPDATED for Elite and Girl 4) Conforming dress for A4 Hat prop 12 textures 04 TR Mat Pose Presets This is one of my firsts dresses it has some morphs but not as many as I do now, but has all the Full body Morphs of V4, some partial morphs and the one of Pose and Movements . Happy Rendering
New Style fot *Sexy Jeweled Birthstones V4*: Sexy Jeweled Birthstones for V4 AVAILABLE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=66211&vendor=DiYanira
Halloween for DY Sensuel Romance: two texture sets for the outfit. Required DY Sensuel Romance for V4 HERE http://market.renderosity.com/mod/bcs/index.php?ViewProduct=72711&vendor=370376
FREE BELLE HAT SMART PROP: THIS IS A HAT SMART PROP, COMES WITH 4 TEXTURES. IT IS DONE TO MATCH MY DY BELLE DRESS AVAILABLE HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=86914&vendor=DiYanira HAPPY RENDERING.
De MODA for RebelEncore: De MODA for RebelEncore Required Products: Powerage's RebelEncore It includes 6 styles for the Coat,skirt,shirt and 6 mat pose for the fur with the default transparency
DY My Place 'Dressing Area': Dressing Area includes: *One Dressing Table (as a figure and as a prop) *Three stools to choose from *Two Wig Stands *One Perfume Bottle *One Perfume Atomizer *Nine Material Options for the Dressing Table and Stools: Glamour, Hollywood, Bridal, Silver, Dolly 1, Dolly 2, Exotic, Traditional and Royalty BONUS: An Extra Wig Stand and 3 poses for V4
ALBA V4 Character Zip 2-2: Morphs & Mat Poses *Alba Head INJ & REM *Alba Head2 INJ *Alba Body INJ & REM *Alba Full INJ *Nails Length INJ & REM *55 Poser Material poses .Pz2 *1 MAT Default Apply *14 MAT Eyes *4 Mat Cornea TR *2 Mat Eyelashes Tr *3 Mat Eyelashes Colors *12 MAT Makeup *07 MAT Nails Textures *1 Default Head Map, No Makeup *1 Default Torso Map *1 Default Limbs Map *12 Additional Makeup Head Maps *14 Eye Maps *2 Lash Trans Map *1 Teeth Gum Map *4 Cornea Trans Map *06 Aditional Nails Maps *Bump Maps for Face, Torso, *Limbs, Eyes, Teeth & Gums This product works in D|S 2&3, however surfaces need adjusting.
Birth of a Super Heroine for DY Cute V4: REQUIRE: http://www.renderosity.com/mod/bcs/dy-cute-for-v4-a4-g4-elite-bundle/78845 Wonder Woman's first cover appearance in Sensation Comics #1, January 1942( here is the link http://superherohalloffame.com/fe_sum.php?ID=2). When I saw what was back then her first costume, I thought, I have the perfect dress to recreate that look. And here it is.
Exotic 01 for Glamour Dress: Dress Available HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=89988&vendor=DiYanira
Winter for RCStar Outfit: Outfit available HERE http://www.renderosity.com/mod/bcs/dy-red-carpet-star-outfit/90300
ESPLENDEROUS EXTRAVAGANZA zip 2-2: Required Products: Extravaganza by Powerage It works in Poser 5 or 6 and DAZStudio It include the following content: 09 textures for the Dress 09 Textures for the Hat 09 Textures for the Parasol 09 Textures for the Purse 07 Textures for the Ornaments Dress Spread OFF mat pose Lace Transparencies mat poses for the Dress, Hat, Parasol
Bandidas 01 for Modern Cowgirl Outfit updated: You need Modern Cowgirl Outfit for this to work, available HERE http://www.renderosity.com/mod/bcs/modern-cowgirl/83567
Velvet and Fur shaders for DAZ Studio: Velvet and Fur shaders for DAZ Studio 2 and 3 not tested in DS4 but should work fine. I hope it is useful. Happy rendering.
ALBA V4 Character Zip 1-2: Morphs & Mat Poses *Alba Head INJ & REM *Alba Head2 INJ *Alba Body INJ & REM *Alba Full INJ *Nails Length INJ & REM *55 Poser Material poses .Pz2 *1 MAT Default Apply *14 MAT Eyes *4 Mat Cornea TR *2 Mat Eyelashes Tr *3 Mat Eyelashes Colors *12 MAT Makeup *07 MAT Nails Textures *1 Default Head Map, No Makeup *1 Default Torso Map *1 Default Limbs Map *12 Additional Makeup Head Maps *14 Eye Maps *2 Lash Trans Map *1 Teeth Gum Map *4 Cornea Trans Map *06 Aditional Nails Maps *Bump Maps for Face, Torso, *Limbs, Eyes, Teeth & Gums This product works in D|S 2&3, however surfaces need adjusting.
Shalimar for SP3: Morph for Stephanie Petite 3
Widow for DY Belle: You need DY Belle Dress for this to work, you can find it HERE http://www.renderosity.com/mod/bcs/dy-belle/86914
JeanOlogy 02 for free DY Chic Halter Dress: You can find the Free dress DY Chic Halter Dress here http://www.sharecg.com/v/35879/Poser/DY-Chic-Halter-Dress-for-V4 Happy rendering.
DY Chic Halter Dress for V4: Required Products: Victoria 4, Poser 6 , DAZStudio The content of this zip can not be redistributed in any kind, comercial renders are allow, but not comercial textures for this product. It include the following content: CHIC HALTER DRESS *one obj, one cr2 *Several V4 body morphs and specials morphs for pose and movements *Aiko 4 Full Body Morph, A4 Base, A4 Petite, A4 Realistic, A4 Stylized * Elite body shapes, Fantasia, Sylph and Utopyan *The Girl 4 Base 8 textures for the dress 2 tansparencies Options for the dress I hope you like it.
Fashion Styles for Shinsekai A3: Required Products: Shinsekai Outfit available HERE http://www.daz3d.com/shop.php?op=itemdetails&item=4528 It works in Poser 5 , 6 and DAZStudio This texture packt include the following content: 10 textures for the suit of 3000X3000 resolution 10 textures for the skirt of 2000X2000 resolution 10 textures for the boots of 2000X2000 resolution 10 textures for the gloves 2000X2000 resolution And as a BONUS 3 poses for Aiko3 Product used in promo: Fancy Moods for Sylphiad Hair HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=51632
EXOTIC Collection for UTY3-Kuro: Required Products: V4-UTY3-KURO available http://market.renderosity.com/mod/bcs/index.php?ViewProduct=52607&vendor=295602 It works in Poser 5 or 6 and DAZStudio This pack include the following content:25 textures for the suit and gloves and 25 textures for the stockings and boots and 2 transparencies for the stockings. .
Aurora V4 character: This was my first character more than 4 years ago, I thought it was about time to share it with you so here it is Aurora,she has 13 make-ups, 13 eyes colors, one necklace skin and 7 second skins (the number 7 is the new one and it's not shown in the promo). I hope you enjoy it as much as I did creating her. Happy renderings
Lace for Glamour Dress Updated: Dress available here http://www.renderosity.com/mod/bcs/glamour-dress/89988 . (Fur belongs to RCStar outfit), Happy rendering.
IN THE BEGINING for Henesis Dress (SNAKE): Its an expansion for Henesis Dress V4,, everyday I will release a different animal texture for the dress u till the expansion it's complete it, It is a total of 11 textures Here is the first one The Snake. I hope you like it.  Dress available HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=93240&vendor=DiYanira
ANNE V4 Character zip 1-3: Character Package: Morphs & Mat Poses *Anne Head INJ & REM *Anne Body INJ & REM *Anne Full INJ *Nails Length INJ & REM *01 MAT Default Apply *21 MAT Eyes *06 Mat Cornea TR *03 Mat Eye Sciera *20 MAT Makeup *03 Mask Face MAT Makeup *01 Natural MAT Makeup *04 Skints MAT (1 tatoo and 3 body suits) *Suit Morph *74 Poser Material poses .Pz2 This product works in DS 2,3,4. However surfaces need adjusting.
Aurora Dress V4-A4-G4-Elite (1-2): Aurora dress updated not just supported morphs but also the mat pose now it includes bump files.  Merry Christmas and happy rendering.
SEXY CHRISTMAS for V4-A4-G4-S4-Elite: This is a revamp of Christmas Outfir ll, now named Sexy Christmas, it has new textures and new morphs.  Three pieces ( top, skirt, boots ).  Enjoy, happy rendering.
Fantasy Warrior 02 for DY Mystic Fantasy V4: http://diyanira.deviantart.com/gallery/50583766/Mystic-Fantasy-V4
Celtic for DY Mystic Fantasy Outfit: http://diyanira.deviantart.com/gallery/50583766/Mystic-Fantasy-V4
Hot pink for DY 20s Era Outfit: You need DY 20s Outfit V4 for this to work, available here www.diyanira3dworld.com/store/store_2
ANNE V4 Character zip 2-3: Character Package: Morphs & Mat Poses *Anne Head INJ & REM *Anne Body INJ & REM *Anne Full INJ *Nails Length INJ & REM *01 MAT Default Apply *21 MAT Eyes *06 Mat Cornea TR *03 Mat Eye Sciera *20 MAT Makeup *03 Mask Face MAT Makeup *01 Natural MAT Makeup *04 Skints MAT (1 tatoo and 3 body suits) *Suit Morph *74 Poser Material poses .Pz2 This product works in DS 2,3,4. However surfaces need adjusting.
Shoulders Fur: This is Design to match the DY Belle Dress , but it can be use as a standalone with any other dress.
11 Poses for DY RCStar Dress & 10 poses for v4: Outfit available HERE http://www.renderosity.com/mod/bcs/dy-red-carpet-star-outfit/90300 (Work best if you apply the poses before any character.)
GOLD for DY Haute Couture: Gold Style for DY Haute Couture (Outfit available HERE http://www.renderosity.com/mod/bcs/dy-haute-couture/85801). Happy rendering.
Fantasy Warrior for DY Mystic Fantasy V4: http://diyanira.deviantart.com/gallery/50583766/Mystic-Fantasy-V4
DY CHRISTMAS HAT UPDATED: THIS IS A SMART PROP CHRISTMAS HAT I DID TO MATCH MY CHRISTMAS OUTFIT.  I HOPE YOU LIKE IT. UPDATED DECEMBER 22,2010 ,ADDED TWO MORPHs...  UPDATED October 21, 2012 three more morphs; new style, bend and wrinkle.
MY PLACE - Living Room: Full living room, walls and other parts can be hide.  Happy renderings and Merry Christmas.
RED for DY 20s Era Outfit V4: You need the DY 20s Era Outfit for this to work you can find it in my site diyanira3dworld.com
Playing Violin-Viola Upper poses for V4: I made two upper poses, the violin was a freebie but I couldn't find it so apparently is not available anymore,I had to re-scale and position for it to work you need to adjust the pose ti fit the violin you use for your renders. It include the hand poses. Enjoy.
Spider Lady for DY Mystic Fantasy V4: http://diyanira.deviantart.com/gallery/50583766/Mystic-Fantasy-V4
Fiesta Nights for Ole Outfit V4: OLE Dress AVAILABLE HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=81610&vendor=370376
Celtic 02 for DY Mystic Fantasy V4: You can find it HERE https://www.facebook.com/yanira.jimenez.71/media_set?set=a.648827055133060.1073741836.100000173137351&type=3 or here http://diyanira.deviantart.com/gallery/50583766/Mystic-Fantasy-V4
Pink Lady for DY Belle II for V4: You need DY BELLE II for V4 for this to work, available here www.diyanira3dworld.com/store/store_2
DY Halter Dress V4-A4-G4-Elite: DY HALTER DRESS for V4This is a comforming Halter Dress Retro Look,you can take it from the retro look to Classic or modern, it includes:*Comforming Dress for V4*18 textures,*08 poses for the dress*05 poses for V4
Lace for DY Mystic Fantasy: You can find it here https://www.facebook.com/yanira.jimenez.71/media_set?set=a.648827055133060.1073741836.100000173137351&type=3 or here http://diyanira.deviantart.com/gallery/50583766/Mystic-Fantasy-V4
Xpansion for DY Halter Dress: You need the DY Halter Dress for this to work. http://www.sharecg.com/v/73590/browse/11/Poser/DY-Halter-Dress-V4-A4-G4-Elite
BRIDAL for Glamour Dress: Dress available here http://www.renderosity.com/mod/bcs/glamour-dress/89988 . Happy rendering
LADY OF LIGHT FOR DY FANCY ELEGANCE: DRESS HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=67526&vendor=370376
ANNE V4 Character zip 3-3 UPDATED: Updated fixed the missing file and the updated Anne Mat sh.pz2. Character Package: Morphs & Mat Poses *Anne Head INJ & REM *Anne Body INJ & REM *Anne Full INJ *Nails Length INJ & REM *01 MAT Default Apply *21 MAT Eyes *06 Mat Cornea TR *03 Mat Eye Sciera *20 MAT Makeup *03 Mask Face MAT Makeup *01 Natural MAT Makeup *04 Skins MAT (1 tatoo and 3 body suits) *Suit Morph *74 Poser Material poses .Pz2 This product works in DS 2,3,4. However surfaces need adjusting.  Final Update September 27, 2012, Fixed the pz2, it won't ask for missing files anymore.  Happy renderings.
Christmas Styles for DY Cute Dress: Dress available here http://www.renderosity.com/mod/bcs/dy-cute-for-v4-a4-g4-elite-bundle/78845
Emily face morph V4: She is Emily Deschanel (from the TV series Bones) I tried to make it as close as possible to the actress. I hope you like it. You need Morph++ for this to work. The v4 texture I use is Lana v4 elite available at DAZ. Hair is postwork
Lumière for V4: Lumiere and Aurora characters are twins they share the same body morph but not the same texture, Aurora represents the dawn (this is the meaning of her name) and Lumiere represents the Evening, when the night start and you can see the first moon light (this is the meaning of her name too). Here is Lumiere I hope you like her. Required Products: Victoria 4 Morph ++ It works in Poser 5up It include the following content:: 1 full body injection 1 head injection and its respective rem 1 body injection and its respective rem 10 make up options 13 eyes options fingernaisl lenght injection
Sequins for DY Haute Couture: dress HERE http://www.renderosity.com/mod/bcs/dy-haute-couture/85801Happy Rendering
White for DY BELLE II for V4: You need DY BELLE II for V4 for this to work, available here www.diyanira3dworld.com/store/store_2
Christmas 01 for DY Belle II: Outfit HERE www.diyanira3dworld.com/store/store_2
Fantasy Warrior 03 for DY Mystic Fantasy V4: http://diyanira.deviantart.com/gallery/50583766/Mystic-Fantasy-V4
Aurora Dress V4-A4-G4-Elite (2-2): Aurora dress updated not just supported morphs but also the mat pose now it includes bump files.  Merry Christmas and happy rendering.
Patriotic Female Hero for Alba outfit: You need DY Alba Outfit for this to work.http://www.renderosity.com/mod/bcs/index.php?ViewProduct=77448&vendor=DiYanira
Exotic 01 for Glamour Dress: Dress Available HERE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=89988&vendor=DiYanira The Lace-Trim of the texture is from illustrator3dcg here in ShareCG. Happy rendering
DARK LADIES FOR DY FANCY ELEGANCE: YOU NEED DY FANCY ELEGANCE http://www.renderosity.com/mod/bcs/index.php?ViewProduct=67526&vendor=370376
Girafee for Henesis Dress V4: Required Henesis Dress V4 http://diyanira.wix.com/diyaniraworld#!product/prd1/953258034/henesis-dress-for-v4-a4-g4-sf4-s4-elite
Dragon Queen for Mystic Fantasy: You need Mystic Fantasy for this to work, http://diyanira.wix.com/diyaniraworld#!store/c24vq
Simple wrought Iron Lamp: For the Fantasy setting, the braizer floor lamp. Designed to go with the free "Flame" props floating around, this simple yet nice lamp will minimize CPU usage yet still look good for close-ups, such as the Barbarian kicking it over to set fire to the drapes. Free to use personally and/or professionally. Only limit is no offering as 3D download without permission. Just unzip and drop files into "Props" directory in whatever subfolder you find appropriate.
Green Gestalt Free Land Pack 01: For all Poser users, a collection of low-polygon but nice looking landscapes to use for your renders. Just unzip and drop the "!!GGFreeLand01" file in your "Props" directory. Ready to use for whatever scenes you want to create with them. Free for personal or professional use, only permission required is for distributing/selling the models directly. ---Update: Dec 9, 2007, thanks to B'tara K'tahn for pointing out a texture error. Now the textures are in the same directory so just download and copy/replace again if you've downloaded already. Or re-do the texture yourself with something in your liabrary;-)
"Training" horse: The dread of every "Maido" in HCG games, the "Wooden Horse". This one is inspired by "Muku" primarily;-) Simple .PP2 file using textures from standard Poser texture library. I was originally going to make this a for sale prop. But, frankly, I wouldn't have become that interested in Poser without all the free props I found for it. I'll accept donations of course, go to my website http://www.greengestalt.com and click the PayPal link;-)
manhole: a manhole set with barricade and round prop
Traffic Cone: Basic traffic cone prop. Coloured using materials, not texture map.
SciFi Maintenance Tube: Maintenance tube for a science fiction environment, modelled after a Star Trek Jefferies Tube but with industrial textures.
Wartenberg Wheel: A Wartenberg wheel prop with rotating wheel. UV mapped, with a Poser 7 shader.
Morphing Milk carton: A milk carton with morphs to crumble and flatten it as a piece of trash.
Stacked Linen: A stack of folded linen, with different morphs.
Can of beans: A bean can with morphs to open the lid, and make it more or less dented. Beans are included.
Morphing Puddle: A puddle with several morphs and a few different textures.
Morphing Blanket: A simple blanket prop with various morphs, one of which fits a person sleeping under it. Also has a morph to make it thicker like a mattress.
Poseable pizzabox with pizza.: A pizza box that can be opened, flattened, crumbled. With pizza.
Playing cards with morphs: Playing cards with morphs to spread them in various patterns, or have them held in a hand.
Papasan chair: A rattan chair (lovenest) with some morphs for the pillow.
Crushable beer can: beer can with morphs to crumble and crush it.
Morphing Kleenex: A piece of paper with pick-up morphs, can be crumbled to a wad of paper, too.
Morphing Newspaper: A newspaper with morphs to crumble and fold it.
Morphing chewinggum: A lump of chewing gum. Can be flattened. It can also double as a wad of paper.
Condom with morphs: Condom with flattening- and other morphs
New Morphing Condom: Another condom with more morphs
Burger Box: Morphing, crumbling, trashy burgerbox.
Syringe: Disposable syringe with needle. The needle can be made invisible if needed.
Paper coffee cup: With morphs to make it crumble
Cigarettes: One pack of cigarettes with morphs to crumble it up. Also includes a cigarette with morphs to make it shorter and turn it into a mashed butt.
Scratchpole: A simple scratchpole for cats. Please note that this was my very first prop (2002!) and it shows in some places ;o)
Open Book: Another of my very early props. Good at a distance, less convincing up front. But low poly.
Wooden Bowl: Nice polished, wooden bowl.
Fence 2: Low garden fence.
Swamp fog: A simple, layered fog effect for Poser.
Iron Fence: A modular iron fence.
Shopping Bag: A shopping bag. Meant as a trash item, it's not supposed to actually hold anything (see my Morphing Shopping Bag for that)
Apple Core: An icky, moldy apple core.
Chocolate Fever: Chocolate texture for Daz's Cool Fever for Aiko. D|S MAT poses only, since I do not have Poser and don't know how to create the PZ2s. Free for personal or commercial renders only, just don't redistribute as is. This is my first texture set, so be gentle with me LOL. Enjoy!
Christmas Doll Textures: A Christmas outfit for the Digital Cats Media Christmas Doll (a 2006 Christmas freebie with the link in the readme file!). Includes the D|S MAT poses for the shoes, socks, dress, and pantaloons. A cute addition to Christmas scene renders or renders for scrapbooks or Christmas cards!
Halloween for Sian: Hallowe'en add on for Sian for Sadie. 3 makeups. 1 mat for TamiL's hoodie. Enjoy! :)
Sian for Sadie: A character package for Sadie by 3DUniverse. You MUST have Sadie and her morphs for the character morph to work. The swimsuit MAT is for the suit that comes with Sadie when you purchase her.
Little Grounds: Low poly ground props! There are 5 altogether. Rock (not shown...looks like granite kinda sorta), sand, dirt, snow, and grass. I made them in Wings. They're done with shaders so I don't know how they'll work in D|S. You'll need Poser 5 or higher for them. Check the read me for info!
Toon Snowman: This is the first thing I made in Wings3D and I thought I'd share it with everyone. He's a very low poly Poser prop and he comes in two versions. One is the default materials created for him in Wings. They should work in any version of Poser and in D|S *crosses fingers* The other version contains shader nodes which may only work in Poser 5 and up. Hope you like my snowman! You may use this snowman in any commercial and non-commercial renders. You MAY NOT sell anything in this package or claim it as your own.
Toon Flower Prop: Made in Anim8or, 4 material zones, low poly. Enjoy!
Toon Butterfly Prop: Made in Anim8or by me. =D 7 material zones. See read me for additional information. Have fun!
Toon Cattail Prop: 4 materials zones, low poly, made in Anim8or. Enjoy!
Sweetie Hair: All fixed! Please re-download!
Eyelashes for Gumdrops: 3 sets of eyelashes for Littlefox' Gumdrops. There aren't any morphs but shifting them around a bit seems to do mostly okay. The fourth picture shows a combination of two of the lashes. Let me know if there's any issues. You can also find the eyebrows in my downloads. Have fun!
Eyebrows for Gumdrops: I wanted eyebrows..so I made some! They morph to make all sorts of expressions (see pictures for morphs) . I thought I'd share with everyone. Hope you enjoy them!
Colleen for V4.2: Thanks to Callie Vee I am able to make this character available for download again. See pictures for what's included. Enjoy!
Hairs Fits For Staci vol1: Staci usable fit poses for numerous Poser hair and conforming hair. copyright 2006 Jean-Jacques Roh aka rjjack. Contents created by Jean-Jacques Roh a.k.a. rjjack and uploaded by Anna Elkins a.k.a. B'tara K'tahn with permission. Does not contain hair items; merely makes them fit Staci.
Hairs Fits For Staci vol2: Staci usable fit poses for numerous Poser hair and conforming hair. copyright 2006 Jean-Jacques Roh aka rjjack. Contents created by Jean-Jacques Roh a.k.a. rjjack and uploaded by Anna Elkins a.k.a. B'tara K'tahn with permission. Does not contain hair items; merely makes them fit Staci.
Boot Cuff's Add-on for Agent Staci Clothing Pack: Pair of swashbuckler-style boot cuffs for the low heel Agent Staci Boots. Requires free Staci Agent Clothes set. (C) 2004 Burnt Toast Design Contents created by Allan McCormick a.k.a. odeathoflife and uploaded by Anna Elkins a.k.a. B'tara K'tahn with permission. (threedgraphics) @ ShareCG.com
Staci Agent Clothes: Halter dress, boots and trench coat inspired by an ensemble from No One Lives Forever. Former BurntToastDesign commercial package. (C) 2004 Burnt Toast Design Contents created by Allan McCormick a.k.a. odeathoflife and uploaded by Anna Elkins a.k.a. B'tara K'tahn with permission. (threedgraphics) @ ShareCG.com
Staci Casual Clothing: Tank Top, Skirt, Shirt and Cargo Pants for Staci. (C) 2004 Burnt Toast Design Contents created by Allan McCormick a.k.a. odeathoflife and uploaded by Anna Elkins a.k.a. B'tara K'tahn with permission. (threedgraphics) @ ShareCG.com
Staci Corset: Corset with panty for Staci. (C) 2004 Burnt Toast Design Contents created by Allan McCormick a.k.a. odeathoflife and uploaded by Anna Elkins a.k.a. B'tara K'tahn with permission. (threedgraphics) @ ShareCG.com
Staci Thigh Boots: Thigh high boots for Staci. (C) 2004 Burnt Toast Design Contents created by Allan McCormick a.k.a. odeathoflife and uploaded by Anna Elkins a.k.a. B'tara K'tahn with permission. (threedgraphics) @ ShareCG.com
Staci Mermaid: Shell bikini top and posable mermaid tail for Staci. Includes MAT poses to hide parts on Staci, as well as ready poses for the mermaid tail. Former Renderosity Marketplace item, (C) 2004 Burnt Toast Design Contents created by Allan McCormick a.k.a. odeathoflife and uploaded by Anna Elkins a.k.a. B'tara K'tahn with permission. (threedgraphics) @ ShareCG.com
Staci Sheer Top: One button opened blouse for Staci. Contains both Conforming (.cr2) and Dynamic (.pp2) versions. (C) 2004 Burnt Toast Design Contents created by Allan McCormick a.k.a. odeathoflife and uploaded by Anna Elkins a.k.a. B'tara K'tahn with permission. (threedgraphics) @ ShareCG.com
Staci Strap Top: Thin strapped top for Staci. (C) 2004 Burnt Toast Design Contents created by Allan McCormick a.k.a. odeathoflife and uploaded by Anna Elkins a.k.a. B'tara K'tahn with permission. (threedgraphics) @ ShareCG.com
Staci Suit Pack: Long Skirt, High Heels, Jacket and Long Slacks for Staci. (C) 2004 Burnt Toast Design Contents created by Allan McCormick a.k.a. odeathoflife and uploaded by Anna Elkins a.k.a. B'tara K'tahn with permission. (threedgraphics) @ ShareCG.com
Staci Casual Clothing MATs: Textures and MAT Poses for Staci Casual Clothing by odeathoflife, available for free here. (May not include correct thumbnails, though.) (C) 2004 Burnt Toast Design Contents created by Allan McCormick a.k.a. odeathoflife and uploaded by Anna Elkins a.k.a. B'tara K'tahn with permission. (threedgraphics) @ ShareCG.com
spook01: background image in jpeg
spook02: background image in jpeg
spook03: backgound image in jpeg
spooky background: enjoy!!!
Viking Settlement: viking settlement for poser
Dirty Windows: 6 windows with dirty glass for poser
witches pentagram ring: smartpropped to V4's left mid 1 finger, with slight adjustment should fit any figure texture how you wish i used p6 silver ref for the texture, (not supplied) a must for all your witchy/goth/magic renders ENJOY !!!
Graybot: A simple, Poser 4 Robot figure with bump maps and poses.
Simplistic Polonaise - Elements 1: Two texture sets for Jan 19's Polonaise. Elements in this package are Earth and Air.
Darling Nighttime: Free textures for the Darling Nightgown by Fleshforge, found at http://sites.google.com/site/fleshforge2/Home/free-stuff/darling-nightgown-v4. Textures used: BB Megapack by Koty Lapid (BonBonish) Sew and Sew Frostbite by Macalatier Real Textures By Darkness Design Escaroba Set by www.jetiro.com
Simplistic Leah: A new texture set for Gyspy Leah by Jan 19. Textures used: Plum perfect and Pastel Weave Set by www.jetiro.com Dark Gothic Kit by Kimber Sew and Sew Frostbite by macatelier Tallu's Florabundanceby Daisy Dearest Red and Gold Kit by Kimber MG Calm by Moongraphics
Simplistic Gen: Textures for Gen by EvilInnocence at www.evilinnocence.com Textures used Dark Gothic Kit by Kimber Sew and Sew Frostbite by macatelier Goes Yule by Anita Schaerlaeken aka Amaranth Black Nights Seamless Tiles Free pack by 3Dillusions BB Megapack by BonBonish
Sundress of Summer: Textures for for the Floral Sundress by EvilInnocence, found at www.evilinnocence.com under freebies. Textures used: Real Textures by MMD Freebie Contest Giveaway from Tyllo Teresa Sew and Sea Fronstbite by macalatier Fabrics Textures and Mega texture by HoboBo ~ES Summer Denim Bright~ and Ethereal Retreat by Ethereal Shine The Blues and Summer Ice Cream Cat McRoy Daisy Dearest by Tallu's Florabundance Fabric Basics Kit by Jerry Walsh Dec 11 Leather Textures by Natrat
Modern Retro Bikini: Textures for Retro Bikini by LM Designs.
Summer Cupcakes: CatMcRoy gave us these lovely textures and just asked for EvilInnocence's Cupcake and April Dress textured with them. I'm happy to fill out the first request.
Light Nights: Pretty 3d's Pretty Night Textures. Used Sewandsew's Frostbite by macatelier and 16 Seamless Texture Tiles by Kimber. Basically got Sewandsew and wanted to experiment with it on something I've always adored. :) Enjoy and thanks for looking!
Hunter in Leather: Free textures for the Daz's The Hunter, found at http://www.daz3d.com/i/3d-models/-/the-hunter-for?item=7978&_m=d Textures used: HoboBo's Seemless Leather Texture NatRat's Leather(Dec11) Mini Goth Kit from Kimber Thank you for looking and downloading. :)
Fashion poses for V4 (Set 1): 3 free poses for V4
Fountain V4: Included : - 2 props (Bowl with water + Pool with floor and water) - 1 pose for V4 - 1 material for V4 (or other) Not included : vegetations and splash ;)
Against the wall for V4: 4 free poses for V4 This is my first contribution ! I hope you like it ;)
Wood Table: I'm a beginner in the creation of 3D object but I wanted to share this with you :)
Butter churn: An antique butter churn for Poser. Modelled in Blender, textures made in Genetica.  
Khaki short set for Maddie and Matt: Poser Dynamic clothing - loose fitting shorts and shirt for Maddie and Matt, the Daz Generation 3 Pre-schoolers. Because they are loose fitting and a bit oversized, these would not work as conforming clothing. Instructions on how to use are in the readme file.    
Varingdal: This is a large landscape prop depicting  a wide shallow valley surrounded by gentle hills.Sculpted and texture painted in Blender with Genetica textures used in the texture paint brush.Normal map generated using Genetica. Texture map and normal map are both 4096x4096 pixels.Best used with an environment dome like Bagginsbill's free envirosphere.Commercial renders allowed, contents not for redistribution.
Dynamic skirt and blouse for P8 Alyson: A Poser dynamic item, constrain the cuffs and waistband in the Poser cloth room. Made for Poser 8 Alyson. Five texture options as Poser material collections in the materials library.  
Flentonsie hair for Maddie: This Poser dynamic hair prop will fit Maddie or Matt (the DAZ generation 3 pre-schoolers).It is intended to look like hair that was cut at home by a relative, not a salon style.Commercial renders allowed, contents not for redistribution.
Voortrekker Kappie for Maddie: A traditional Afrikaner sunbonnet for Maddie, the generation 3 Pre-school girl from DAZ. A very practical item, gives excellent sun protection and stays on the head.  It is a smartprop parented to the head. Materials use displacement. The texture template is included. Thanks to Hobobo for the background.
Curved Valley: A large scene prop modelled in Blender and texture-painted using some of Hobobo's seamless images in the texture brush.
Patterned ensembles for V3 Every Day Clothes: Seven texture sets for some of the items in PhilC's Every Day Clothing set for Victoria 3. Applied with material collections in the materials folder.
Outbuildings: This is a rigged building made to go with my free "464WestAve". The building contains a garage, a medium sized room and two small room (washroom and toilet). The toilet room has a back flap to allow remove of refuse or nightsoil bucket. All doors open.Commercial renders allowed, contents not for redistribution.
Chicken Coop: An enclosure for free range chickens, a roost for them to sleep on, a food trough and a water trough. The materials will probably not work in Daz studio.  
Marcel hair for V4: Early 20th century heat-styled waves for V4. Called Marcel hair after the guy who invented the curling tongs used to make these styles.I made this style for RosemaryR.Poser dynamic hair made in the hair room.Commercial renders OK, contents not for redistribution.
8 textures for Poser World's Oxford shirt.: These textures are applied with Poser material collections. The Poser World Oxford shirt is available for M3, Luke and David, and also converts well to M4 using Wardrobe Wizard. It is part of their Craig collection. Poser World is a subscription site. Commercial renders allowed, contents not for redistribution.
G2M Casual recolours: A set of textures for the casual pants, casual dress shirt and casual dress shoes for Simon that come with Poser since version 7. Simon's clothes fit all the Poser G2 males (Generation 2, not to be confused with Daz GeneSys 2). Shown here are Kelvin, James G2 and Simon. Thank you to Hobobo for the Cyclorama background texture.
464 West Ave: This package contains a Poser figure of a small Mid 20th Century South African suburban house. One material collection is provided and the ceiling is a separate prop, parented to the house. Doors open, and the roof can be hidden or opened like a lid.Commercial renders allowed, contents not for redistribution.Thank you to Hobobo for the background scene used in the promo image and thumbnails.
2Ponies4Baby: This is a transmapped hair prop for the DAZ Millennium Baby.Setup in Poser using PhilC's Hair designer, refined in Blender.Commercial renders allowed, contents not for redistribution.
A dress and panties for baby: This set contains a dress and panties for the DAZ Millennium Baby.The dress can be used as conforming, Poser dynamic or as a hybrid in the Poser cloth room. Dynamic is recommended for the dress.The panties are conforming.Eight colours for the set in the Materials folder.Commercial renders allowed, contents not for redistribution.
Sailor suit for K4: A conforming sailor suit for Daz's Kids 4. The template is included in the textures folder. Thank you to Hobobo for the background Cyclorama texture. The shoes are not included, they are from Poser World.    
Textures for Pre-teen Skirt and Shirt: 10 textures each for the skirt and shirt from the Millennium Kids clothing pack, available at DAZ. The textures were made for the pre-teen DAZ Generation 2 Millennium Girl (Pre-teen Vicky). Poser material collections are supplied. Commercial renders allowed, contents not for redistribution.  
Denim for RAF Desert uniform from Poser World: This is a denim texture for the pants and shirt from the RAF Desert uniform from Poser World. The uniform is available for Apollo Maximus, David, Michael 3, James, and Stephanie 3. The texture is applied with a material collection, in the materials library. Hair is Painter hair by 3Dream. Background by Hobobo
Double hill: Landscape prop for Poser, modelled and texture-painted in Blender, using some of Hobobo's seamless images in the texture brush.Two connected hills with a large flat area in front.
Ray for James G2: A head morph for James G2, sculpted in Blender and prepared for distribution with PhilC's Poser Toolbox. This morph does not contain any of the figure's original geometry, although it is an obj file.Instructions for use are in the readme file.
Front panel dress for K4: This is a conforming dress for the Kids4 girl by DAZ. It is best used as a hybrid in the Poser cloth room (Clothify the hip).The dress may be used in commercial or personal renders, but the contents of the runtime may not be redistributed.As a bonus I am including the tiling textures used in making the dress. These may be used as a merchant resource for commercial or free items.
Swartland Farmhouse: Rural South African farmhouse figure for Poser. The roof can be made invisible, doors open and close. The interior has basic textures but is not subdivided into rooms. Materials are texture based, but would need adjusting in Poser versions older than Poser 9. Not tested in Daz Studio.  
Rusbank for Poser: A traditional Afrikaner "resting bench" .  A sturdy wooden settee with a seat made from woven leather thongs or riempies. Very uncomfortable but highly valued by Afrikaner families, it was probably designed to discourage people just sitting around instead of being active and productive.
Collared dress for Maddie: A simple A-line dress with short sleeves and a collar, for Maddie. The dress is conforming, intended for use as a hybrid in the Poser cloth room. Clothify the hip. Six colour options applied with Poser material collections. The template is included. Commercial renders allowed, contents not for redistribution. Thank you to Hobobo for the background scene.  
Robe for Stephanie 3: Very wide sleeves and a flared skirt, this is a  Poser dynamic gown for Stephanie 3. Unfortunately it is not compatible with Daz studio. UV-mapped, but not textures provided. I use procedural textures on it, but feel free to texture it if you want to. Commercial renders allowed, contents not for redistribution.    
A shorts set for Poser 7 Ben: Shorts and Tshirt for Poser 7 Ben. Both are conforming. Colour options in the materials folder, as material collections. The templates are included for your own textures. Commercial renders allowed, contents not for redistribution.
Flat shoes for Dawn: Conforming shoes for Hivewire3d's Dawn. Five texture options applied as material collections. Made for Poser. Commercial renders allowed, contents not for redistribution.
Hans for Simon G2: A head morph for Simon G2.Sculpted in Blender, prepared for distribution with PhilC's Poser Toolbox.The morph is an obj file but contains none of Simon's geometry.Instructions for use are in the readme file.
JimMacKay for James G2: A sculpted head morph for James G2 (Smith Micro figure).Instructions for use are in the Readme file.Sculpted in Blender, prepared for distribution with PhilC's Poser Toolbox, so it does not contain any of the original figure's geometry, although the format is obj.
Basic clothes for Dusk: Pants and shirt in both conforming and Poser dynamic versions for Dusk, Hivewire's new male figure. Three colour options for the pants, five for the shirt. Poser 9 and upwards. Commercial renders allowed. You may modify and redistribute the contents for the package for the purpose of making FREE clothing for Dusk,  in Daz Studio or Poser, but you may not sell it or use it to create commercial products.
Long dress for Millennium Pre-teen girl: This is a Poser dynamic dress. The constrained area around the waist is already defined. Five texture options as material collections. Template included.
Drop-waist dress for the Pre-school girl: This dress is for the DAZ generation 2 pre-school Vicki figure - the Millennium pre-school girl. Conforming and Poser dynamic versions of the dress are supplied. The materials use displacement maps for the pleats in the skirts and to define the seams. Seven texture options are supplied as material collections in the materials library.
Shoes for Angela 2: These are smart-prop shoes for Angela 2.1 by Mankahoo. You can get Angela 2.1 at www.mankahoo.com. Six colours applied with material collections. The template is included. A pose is included to bend the toes for the shoes. Making the figure's toes invisible is recommended.
Low bun hair for V4: A Poser dynamic hair prop for Victoria 4.Commercial renders allowed, contents not for redistribution
Textures for the Poserworld Classic Dress: Six texture sets for the Poserworld Classic Dress. These textures fit the V3 and V2 versions of the dress.  The textures are applied with material collections, found in the materials folder. A transmap is used to make the dress shorter.  
Short sleeve school uniform for Luke: Two versions of the standard South African school uniform for boys - conforming and dynamic. Made for Luke, Daz's generation 3 young teen boy. The socks and shoes in the promo image are from Poser World (converted from Laura with Wardrobe Wizard), and not included in the package.  The template is included for you to make other textures if you want. Commercial renders allowed, contents not for redistribution.
Flared dress for Angela 2: This dress is for Angela 2 by Mankahoo. The figure is available at www.mankahoo.com It is a Poser dynamic dress, six textures and the template provided. Textures are applied with material collections.  
Shirt and Skirt for Michelle: Michelle also gets a shirt and skirt dress. Michelle by Tate is available at RuntimeDNA and is a lovely figure to work with. Conforming and dynamic versions, eight textures, template included. Use the dynamic version for any poses that involve the skirt.  
Smock for The Kids 4: A dress for the K4 girl. Poser dynamic as well as conforming version included. Pink and blue textures with special smocking effect. The template is included.  
Winterpleats dress for the Kids 4 girl: A Poser dynamic dress with a short yoke, long sleeves and full skirt. It comes in seven colours (material collections). The template is included. This does not work in DAZ studio and can't be made conforming because of the full pleated skirt, but it simulates quite quickly and gives good results in the cloth room. Tips for use in the Poser cloth room are in the readme file.
Laura dress for Project Evolution: Poser dynamic dress for Erogenesis's Project Evolution, available at CGbytes. Five material sets. Template and obj included.
Shorts and shirt for K4: A one-piece outfit for Daz's  The Kids 4. Can be worn by the boy or the girl. Poser dynamic and conforming versions included. Seven colour choices as Poser material collection files. The template is included.
Shirtwaister for the DAZ pre-teen girl: A shirtwaister dress for DAZ Pre-teen Vicky (Part of the Millennium Girls set). Conforming and dynamic versions included. Dynamic gives better results. Eight colour options in the materials library. (Thanks to Hobobo for the background Cyclorama texture)
Tyler suit recolours: Three additional texture options for Tyler's business suit by Rpublishing. The suit is available from Renderosity.  
Gymslip for Maddie: An old-fashioned school uniform for Maddie, in conforming and Poser dynamic versions. The template is included. Instructions for the dynamic version are in the readme file, but the settings are also pre-loaded.  
Shirtwaister for Laura: Laura also gets a shirtwaister - Poser Dynamic (recommended) and conforming. Laura is the DAZ generation 3 teen girl. Nine colour options, including the grey and white school uniform, needed for the book I am illustrating.  
Teacher dress for Antonia: A conforming dress with five texture options, and versions for Antonia standard and Antonia Weightmapped.
Textures for Menswear 1930 for M4: Additional textures for Daz's Menswear 1930  outfit for Michael 4. Materials are in the materials library. Materials may need adjustment for earlier version of Poser, or for use in Daz Studio.
Flat shoes for Roxie: Conforming shoes for Poser 10 Roxie in a range of colours. Texture options in the materials folder.  
Pre-teen shirt and pants: Conforming and Poser dynamic outfit, for the Daz Pre-teen girl and boy. (Millennium girl and millennium boy, Daz generation 2). Note, the results with the dynamic version are far superior to the rigged version. Ten colourways as Poser material collections. Template included.  
Summer dress for Stephanie 3: A Poser dynamic dress for Daz's Stephanie 3 (Stephanie petite). Intended for use in the Poser cloth room. Five colours in the materials library. The hat and shoes are from Poser World, the background is by Hobobo (Thank you Bo!) Commercial renders allowed, contents not for redistribution.    
Vintage Golf Bag for Poser: A simple prop for Poser of a vintage golf bag. Commercial renders allowed, contents not for redistribution.
Sustertjie hair for Pre-school Vicky: This is a Poser Dynamic hair prop for the DAZ Millennium kids pre-school girl (DAZ Generation 2). Pre-school Vicky, not Maddie. Although you could fit it to Maddie quite easily.Commercial renders allowed, contents not for redistribution
Tresses for Laura: This is a Poser Dynamic hair prop for Laura by Daz.Unfortunately it will not work in Daz studio.Six versions are provided in different colours.The hair has more than 70 groups, each one styled by hand.I recommend PhilC's "Curl up and Dye" utility for modifying the hair textures and settings if you need more variation.Commercial renders allowed, contents not for redistribution
Wedding gown for Poser 9 Alyson: This is a Poser dynamic wedding dress for Poser 9 Alyson, for use in the Poser cloth room. The dress is in the props library. The template is included.    
Skirt and Shirt for Roxie: Conforming and dynamic versions of this dress for Roxie (Poser 10 native figure). 13 Material collections to apply different textures. Template included. Only works in Poser 10 or Poser Pro 2014.
Basics for Scarlet: Dynamic pants and shirt for Scarlet by Sixus1, available at Renderosity. Six colours for the pants, nine for the shirt, in the materials library. Poser dynamic clothing, Scarlet is compatible with Poser 9 upwards.  
Shirt and skirt for Maddie: Conforming as well as Poser dynamic version of a shirt and skirt that can be a school uniform or a smart dress. Ten colour combinations are provided in the materials folder. The template is included for retexturing. Made for Maddie, the Daz Generation 3 pre-school girl.    
Shirt and Skirt for Alyson P9: Alyson 2 (Poser 9, weightmapped version), also gets a shirt and skirt outfit. The dress was remodelled for her, not converted, Conforming and dynamic versions included, as well as the template. Eight colour variations applied as material collections. The dynamic version is much better for poses that involve the skirt. The conforming version can also be used as a hybrid, clothifying the skirt only (But in that case you might as well use the dynamic version, it is no extra work)  
Box pleat dress for Dawn: Conforming and Poser dynamic versions. The dynamic dress is vastly preferable for any poses that involve the skirt. Instructions for the dynamic version are in the readme. The template is included for your retexturing projects.  
Grandma's teaset: Teapot, lid, milk jug, sugar bowl,  plate, cup, saucer, spoon, fork and tray (not shown). Three colour options in the materials library.
PzDB1.1 30 Day Trial: New Version! Many new features, Faster Importer and Search Engine Fresh 30 Day Trial - even if your PzDB1.0 Trial expired! PzDB is a Microsoft Access 2007 Database and it’s the first Poser Library Manager that does all the work for you! It AUTOMATICALLY organizes your Libraries into Groups: A Victoria 4 Group, an Aiko Group, a Superhero Group, any Groups you want! It AUTOMATICALLY finds related Items for you! Select an Item of Clothing, it finds the Materials and Morphs! Select a Character, it finds all the poses. Really! It has a powerful Boolean Search Engine with Saved Searches, so you can Load your Victoria 4 Group, load the presaved Search Pattern for Hair, and BOOM: All your Victoria 4 hair! Not just the HR2 hair objects, but the CR2 Conforming Hair Characters too! And the hair Props, hair Materials, Dynamic Hair, even POSES that make hair for other characters FIT Victoria 4!! Reads DAZ STUDIO Files too! You have to see it to believe it, and best of all: YOU CAN! IT’S FREE! You can download a Fully Functional 30 Day Trial of PzDB1.1 right now! (And before you ask: Yes, it comes with all the Microsoft Access 2007 components you need, and they’re free, too.)
Funky Textures for the M4 Stylin' V-Neck: 4 funky textures for the v-neck from M4 Stylin'
Funky Tye Dye: 5more textures for the M4 Stylin' Overshirt this time in funky tye dye style. It's a revival
Nabia Hair - 10 Styles: 10 fantastic styles for Nabia Hair (Poser 7 MAT files). Nabia Hair is available in Renderosity marketplace. Zip file: Only 670 kbytes The included textures were made by myself in Photoshop. The MAT files were totally made by myself in Poser 7.
Jai Hair - 10 Styles: 10 fantastic styles for Jai Hair (Poser 7 MAT files). Jai Hair is available in Daz3D marketplace. Zip file: Only 870 Kbytes The included textures were made by myself in Photoshop. The MAT files were totally made by myself in Poser 7.
M4 Simple Wear - New Textures 2: New Textures for M4 Simple Wear by abacus3d. M4 Simple Wear is available at Renderosity Marketplace. All the MAT poses were made by myself in Poser. The textures were made by myself in Photoshop using some Artist resorces. You can see the used resorces in the txt file included in the zip.
M4 Simple Wear - New Textures 3: New Textures for M4 Simple Wear by abacus3d. M4 Simple Wear is available at Renderosity Marketplace. All the MAT poses were made by myself in Poser. The textures were made by myself in Photoshop using some Artist resorces. You can see the used resorces in the txt file included in the zip.
Radiant Jaguar Hair - 30 Styles: 30 fantastic styles for Radiant Jaguar Hair (Poser 7 MAT files). Radiant Jaguar Hair is available in Daz3D marketplace. Zip file: Only 886 Kbytes The included texture was made by myself in Photoshop. The MAT files were totally made by myself in Poser 7.
HAIR Colours CREATOR - Poser: HAIR Colours CREATOR - Poser by abacus3d Resource product for Artists. For commercial and non-commercial endings. The included resource textures were made by myself in Photoshop. The included MAT files were made by myself in Poser 7.
Erato Hair - 10 Styles: 10 fantastic styles for Erato Hair (Poser 7 MAT files). Erato Hair is available in Renderosity marketplace. Zip file: Only 684 kbytes The included textures were made by myself in Photoshop. The MAT files were totally made by myself in Poser 7.
Alkyone Hair - 10 Styles: 10 fantastic styles for Alkyone Hair (Poser 7 MAT files). Alkyone Hair is available in Renderosity marketplace. Zip file: Only 675 kbytes The included textures were made by myself in Photoshop. The MAT files were totally made by myself in Poser 7.
Nefeli Hair - 10 Styles: 10 fantastic styles for Nefeli Hair (Poser 7 MAT files). Nefeli Hair is available in Renderosity marketplace. Zip file: Only 698 kbytes The included textures were made by myself in Photoshop. The MAT files were totally made by myself in Poser 7.
Leto Hair - 10 Styles: 10 fantastic styles for Leto Hair (Poser 7 MAT files). Leto Hair is available in Renderosity marketplace. Zip file: Only 662 kbytes The included textures were made by myself in Photoshop. The MAT files were totally made by myself in Poser 7.
M4 Simple Wear - New Textures: This freebie requires M4 Simple Wear (available at Renderosity Marketplace). This freebie was completly created by abacus3d. Fabric textures created in Photoshop. This freebie can be used for personal and commercial renders/videos.
Extra textures for Bossy Boots: These are additional textures for Bossy Boots for V4, by Headkase (http://www.sharecg.com/v/29103/poser/Bossy-Boots-for-Vicki-4#commentform). They are for Poser 6 and above. There are six matt colours (including black) and two shiny patent textures, as well as five options for the laces. I have retained Headkase's bump maps (although they've been reduced in intensity) and also his original bootlace textures. Please note that while the crosslacing is part of the boots themselves, the knots and tails are a pair of seperate props that have to be loaded in addition to the boots, and which can be textured seperately. By default the black boots have black/yellow laces.
V4 Gradeschooler: Back by request....This is a child morph for V4.  Morph only. No textures. You will need V4 and Morphs++ to use. Created in Daz Studio 2.3 - Not optimised for Poser, but may still be useable. Unrestricted Use for personal or commercial purposes. 
Toy Fur Character Kit Freebie: Thank you for downloading Toy Fur Character Kit for Poser 5 or higher. :) Toy Fur Character Kit is a collection of Morphs, MAT Poses, Figure Poses, and Lights designed to work with "PocketPets Kitty" by 3D Universe. Toy Fur Character Kit is FREE. You may use it any way you want without requesting permission. You may use it in commercial endeavors as long as the agreement in this license is honored, e.g., rendered art. You are free to distribute this package as long as it has not been altered in any way and this license agreement is included. You may not charge a fee for distributing this package. IMPORTANT!: The MAT Poses in this kit require DISPLACEMENT to be TURNED ON during rendering in order to see the "fluffy" effect. Please see the file:!Rendersettings.jpg for a visual explaination. Thank you! Enjoy! :)
Saturn for Shrieker: Saturn for Shrieker - A Poser and Daz Studio Add-On by JasmineSkunk for Dark Apocalypse Shrieker. Saturn for Shrieker is an Add-On for Dark Apocalypse Shrieker and Dark Apocalypse Shrieker, available at DAZ3D, is required.
Poser Runtime Folder: This is just an empty collection of folders that contain the file structure in Poser for easy ordering of your runtime
indoor ibl: IBL For poser more IBLs can be found www.mtscmedia.com
Yard IBL AO: AO IBL light for posera sample from our IBL collection www.mtscmedia.com
clyde ao: poser ibl ao of scottish country sidea sample from our IBL collection www.mtscmedia.com
mausoleum: IBL AO of the ouside of a mausoleum a sample from our IBL collection www.mtscmedia.com
Stud Earrings for Poser: This is a set of earring props designed to work with many of DAZ's figures in Poser. There are 3 Different type of earrings. Also there are MAT Poses and Material file for changing the material of the metal and the materials of the gem stones These was made for Poser 7 but should work with Poser 5+ The materials may need to be reapplied to work with DAZ Studio. There are DAZ Studio surface files in the materials folder to make applying surface settings easier in D|S
Ankh Earrings for Poser: A set of Ankh earrings props for a whole bunch of DAZ figures. The will not look good when initially loaded in to DAZ Studio. DAZ Studio uses should reapply the surface setting using the file included with the Stud Earrings http://www.sharecg.com/v/39163/Poser/Stud-Earrings-for-Poser
Ring Development Kit: Updated 1-1-10 to fix bad OBJ references for the 7 Stone rings A set of ring props, materials and a PDS file to help in creating ring props for Poser. The porps can also be used just as they are. All the rings have smart props for all the fingers on Victoria 3 and 4 and Michael 3 and 4.
Racy Laces outfit: The Racy Laces Outfit are pairs of tops and pants for Victoria 4 and 3. In addition to the Outfits there are 6 material styles that can be applied either through MAT Poses or Poser Material files. Each MAT Pose or Material file will work for both the tops and the pants. You may experice some poke though with some poses. However, you may be able to eliminate the poke through using some of the morphs in the clothes, such as the inflate or shift morphs. Updated 12-26-09 with DAZ Studio MAT Files
Shower and Bath Accessories: This a a package of prop accessories for the shower and bath. Package Includes Shampoo, Conditioner, Soap, Wet Dry Shaver, Wash Cloth and Tote
1 Carat RIngs: This is a set of props designed to work with DAZ's Victoria 4. There are 4 Different type of rings. There are 8 versions of each ring to smart prop to Victoria 4's fingers (excluding the thumbs). Also there are MAT Poses and Material file for changing the material of the bands and the materials of the gem stones These was made for Poser 7 but should work with Poser 5+ The materials may need to be redone to work with DAZ Studio. I tried making DAZ shaders but after saving them I am unable to get them to apply to anything
Winter Japanese Castle: This is a Poser figure of a generic Japanese Castle in Winter decorated for the Holidays.
Vintage Soxer outfit for V3 & 4: The Vintage Soxer outfit is a mid-20th century skirt and short-sleeve sweater for Victoria 3 and 4
Cavefolk Dresses (and Tunics): Cavefolk Dresses and Tunics are outfits for Victoria 3 and 4 and Michael 3 and 4.
Cavefolk Skirts (and Kilts): Cavefolk Skirts, Kilts for Victoria 3 and 4 and Michael 3 and 4 and Tops for Victoria 3 and 4 for use in Poser
Cavefur textures: This is a package of 6 fur materials for the Cavefolks clothes. The materials can be applied either using Material files or MAT Pose files. There are 2 versions of each material. The first version is for the Cave Dresses and Caves Skirts (they both use the same material or pose files). The second version is for the Tops. The first version will work with the Tops but may add extra material groups). Added DAZ Studio files for the NAT poses on 12-22-09
Atomic Bombs: This package includes 2 Atomic Bomb figures and a Bomb Stand figure. Included are 4 material options for each bomb that can be applied either with Material files or MAT Pose files. Additionally, there are a couple of pose to set the stand up for the included A-Bombs.
Sci Fi Pilot Suit for Victoria 2: This is a set of Sci Fi themed clothes for DAZ's Victoria 2. The outfit consists of 3 conforming figures: Suit, Boots and Sleeves.
Pentagram Earrings for Poser: Here is a set of Pentagram earring props for 15 different figures or morphs DAZ Studio users will want to reapply the surfaces using the surface files included with my stud earrings.
Ankh Rings: Here is a Set of Ankh rings for use with Poser. There are rings for Victoria 3 and 4, Michael 3 and 4 and Aiko 3 As usual, these won’t look good when first loaded in DAZ Studio. However, DAZ Studio users can apply surface settings for DAZ Studio using the surface files that are included with the Stud Earrings set.
Alex for Victoria 4 - MORPHS ONLY: Alex is a face and body morph for the Victoria 4 figure.  The file package includes a full-body INJ and REM PZ2 file, and material INJ for blue eyes.   Required prior to applying character INJ, to get the full result: * Injection of DAZ Morphs++ package * Injection of free Maturing V4 Morph Pack by Tempest (ShareCG) * Injection of i13 BOOM Nose System for V4 (Renderosity) Optional:  * Injection of Simple Details shoulder fix by Corvas (Renderosity) Usage: Alex may be used for commercial or non-commercial work.  Please do not redistribute the ZIP file without attribution.   Notes: 1. Created / tested in Poser 11 Pro; not tested in DAZ Studio.   2. Credits for promo images:  SKIN: Elena for V4 by Mihrelle (Renderosity) [custom skin set up for SuperFly]; Tigger-Blue eye materials and setup by minus269 (included in this package) HAIR: Shantal Hair for G3F by EmmaAndJordi (DAZ) [imported to Poser via XL Library Manager by Dimension3D]
Ophelia for V4 - MORPHS ONLY: Ophelia is a face and body morph package for the Victoria 4 figure, in the style of a "fitness model". The file package includes a morph target INJ for head and neck; head and neck geometries, modified via ZBrush; and INJ and REM PZ2 files for the body only.  Body morph requires injection of DAZ Morphs++.   Usage:  Ophelia may be used for both personal and commercial work; please do not redistribute contents of the ZIP file. Notes: 1. Created for and tested in Poser 11 Pro.  Not tested in DAZ Studio.   2. Skin texture, poses and facial expressions are not included. Sirena [Mihrelle] was the texture around which the morphs were developed, but a number  of textures are suitable for this morph. 
Evelyn for Project Evolution: A morph-dialed character injection for Erogenesis' Project Evolution [Early Edition] figure (http://www.cgbytes.com/store/sku/58313_Project-Evolution-Early-Edition).  Includes one pose and a material INJ for eye textures only.  Requires full installation of Project Evolution, use of Project Evolution base materials, and Poser 10+.  Tested in Poser 11 Pro.  Sample images depict Caucasian Normal materials for SuperFly, plus the eye materials from this package.
Tara for V4 - MORPHS ONLY: TARA for VICTORIA 4 is a face and body morph package for the Victoria 4 figure. The file package includes a morph target INJ for head and neck; and INJ and REM PZ2 files for two body morphs - one suitable for nude renders and the other modified to better support conforming clothing.  Body morphs requires injection of DAZ Morphs++.   Built and packaged in Poser 11 Pro; tested in Poser Pro 2012 and 2014; not tested in DAZ Studio. TARA may be used for both personal and commercial work; please do not redistribute contents of the ZIP file.
Tara for V4 - FULL CHARACTER: TARA for VICTORIA 4 is a full character package for the Victoria 4 figure. The file package includes a morph target INJ for head and neck; INJ and REM PZ2 files for two body morphs - one suitable for nude renders and the other modified to better support conforming clothing; and texture package with two material INJ - natural and makeup.  Body morphs requires injection of DAZ Morphs++.   Built and packaged in Poser 11 Pro; tested in Poser Pro 2012 and 2014; not tested in DAZ Studio. TARA may be used for both personal and commercial work; please do not redistribute contents of the ZIP file.  
Sarah for V4 - MORPHS ONLY: Sarah is a face and body morph for the Victoria 4 figure.  This character was created at the request of a college-aged life model, who wanted a digital analogue.  The file package includes INJ and REM PZ2 files for the full character, head only and body only.   Required prior to applying character: * Victoria 4 figure * Injection of DAZ Morphs++ package * Injection of Maturing V4 Morph Pack by Tempest (http://www.sharecg.com/v/51777/related/11/poser/maturing-v4-morph-pack).   Usage: Sarah may be used for non-commercial work only.  Thank you for respecting the model's preference. Notes: 1. Created for and tested in Poser Pro 2014.  Not tested in DAZ Studio.   2. Skin texture, poses and facial expressions are not included.   3. I also use the Simple Details V4Lite shoulder fix by Corvas for many of my characters; unfortunately, it is no longer available for sale.
Karen for V4 - FULL CHARACTER: Karen is a full character package for the Victoria 4 figure.  This character is a creative collaboration with an artist/model in her 40s.  The file package includes: INJ and REM PZ2 files for the head only, clothed body and unclothed body; a materials file for loading the texture; and corresponding texture files.   Required prior to applying character: * Victoria 4 figure * Injection of DAZ Morphs++ package * Injection of Maturing V4 Morph Pack by Tempest (http://www.sharecg.com/v/51777/related/11/poser/maturing-v4-morph-pack).   Usage: Karen for V4 may be used for both personal and commercial work; please do not redistribute the contents of the ZIP file.   Notes: 1. Created for and tested in Poser Pro 2014.  This has not been tested in DAZ Studio.   2. Textures were created using merchant resource products from Fenrissa, 3Dream and PDesign; and high definition photographs of the collaborator's skin and eyes. 3. Poses and facial expressions are not included.  
Evangeline for V4 - MORPHS ONLY: Evangeline is a face and body morph for the Victoria 4 figure.  The file package includes INJ and REM PZ2 files for the full character, head only and body only.  For the full effect of the face morph, apply the following to V4 figure prior to loading morph INJ:** DAZ Morphs++ package** i13 BOOM Nose System for V4 (https://www.renderosity.com/mod/bcs/i13-boom-nose-system-for-v4/97091/)** Maturing V4 Morph Pack by Tempest (http://www.sharecg.com/v/51777/related/11/poser/maturing-v4-morph-pack).  Usage: Evangeline may be used for both personal and commercial work; please do not redistribute contents of the ZIP file. Notes: 1. Created for and tested in Poser 11 Pro.  Not tested in DAZ Studio.  2. Skin texture, poses and facial expressions are not included. V4 Elite Textures: Amy [DAZ Originals] was the texture around which the morph was developed, but a number of textures are suitable for this morph.  
Karen for V4 - MORPHS ONLY: Karen is a face and body morph package for the Victoria 4 figure.  This character is a creative collaboration with an artist/model in her 40s.  The file package includes: INJ and REM PZ2 files for the head only, clothed body and unclothed body. Required prior to applying character: * Victoria 4 figure * Injection of DAZ Morphs++ package * Injection of Maturing V4 Morph Pack by Tempest (http://www.sharecg.com/v/51777/related/11/poser/maturing-v4-morph-pack).   Usage: Karen for V4 may be used for both personal and commercial work.   Notes: 1. Created for and tested in Poser Pro 2014.  This has not been tested in DAZ Studio.   2. Textures, Poses and facial expressions are not included.  A full character package including textures is also available from my ShareCG portfolio, as of November 2015.   3. I have experienced some protrusion of the eyeballs around the upper eyelids when applying some expression files to Karen for V4.  While you can solve this by forcing limits, this can cause its own problems with other stock expressions.  You should be able to adjust the Z position of both the L and R eyes if necessary; an adjustment of -0.003 will be sufficient in nearly all cases.   4. I frequently use three additional products, none of which are displayed in the promotional images for Karen for V4:    (a) the Simple Details V4Lite shoulder fix by Corvas for many of my characters - unfortunately, it is no longer available for sale;     (b) for unclothed renders, RajDarge's GSpot genital conforming figure, available from Renderotica; and    (c) for unclothed renders, Intimate Hair V4 by Babbelbub, also available from Renderotica    The shoulder fix is self-configuring, if you happen to have it.  It has some issues when the collar and shoulder are bent significantly, which can be adjusted    with a bit of effort.  If you are using (b) or (c) and are interested in the morph settings I use for Karen for V4, drop me a Note at deviantArt  (minus269.deviantart.com), and I'm happy to give you those.  
Anya for V4 - FULL CHARACTER: UPDATED Mar 27 2016: ANYA for VICTORIA 4 is a full character package for the Victoria 4 figure. The file package includes a morph target INJ for head and neck; INJ and REM PZ2 files for two body morphs - one suitable for nude renders and the other modified to better support conforming clothing; and texture package with four material INJ - natural and makeup, with both brown and blue eyes.  Body morphs requires injection of DAZ Morphs++.  PLEASE READ THE README FILE FOR ADDITIONAL INFORMATION REGARDING LOADING EXPRESSIONS.  (There's a reason my characters are free - I'm still learning, and thus there are occasional issues.) Built and packaged in Poser 11 Pro; tested in Poser Pro 2012 and 2014; not tested in DAZ Studio. ANYA may be used for both personal and commercial work; please do not redistribute contents of the ZIP file.  
Wings-Fractal26-RMA-2008: Png Format. Much larger & more detailed than preview shows. Free for personal or commercial use. Do not share on other websites or claim as your work. Feel Free to flip,chop,colorize,embellish etc to match your project or model. Most of all...Enjoy!
Wings-Fractal27-RMA-2008: Png Format. Much larger & more detailed than preview shows. Free for personal or commercial use. Do not share on other websites or claim as your work. Feel Free to flip,chop,colorize,embellish etc to match your project or model. Most of all...Enjoy!
Blue Caverns: 1024 x 768. Feel free to use as background in your poser or other CG artwork or as a desktop background.Personal & commercial use allowed.
BubbleField1: 1024 x 768. Feel free to use as background in your poser or other CG artwork or as a desktop background.Personal & commercial use allowed.
Bubblefield 2: 1024 x 768. Feel free to use as background in your poser or other CG artwork or as a desktop background.Personal & commercial use allowed.
Frosted-RMA-2008: 1024 x 768. Feel free to use as background in your poser or other CG artwork or as a desktop background.Personal & commercial use allowed.
Wings-Fractal 14-RMA-2007: Png Format. Much larger & more detailed than preview shows. Free for personal or commercial use. Do not share on other websites or claim as your work. Feel Free to flip,chop,colorize,embellish etc to match your project or model. Most of all...Enjoy!
Wings-Fractal 17-RMA-2007: Png Format. Much larger & more detailed than preview shows. Free for personal or commercial use. Do not share on other websites or claim as your work. Feel Free to flip,chop,colorize,embellish etc to match your project or model. Most of all...Enjoy!
Wings-Fractal 18-RMA-2007: Png Format. Much larger & more detailed than preview shows. Free for personal or commercial use. Do not share on other websites or claim as your work. Feel Free to flip,chop,colorize,embellish etc to match your project or model. Most of all...Enjoy!
Wings-Fractal 19-RMA-2008: Png Format. Much larger & more detailed than preview shows. Free for personal or commercial use. Do not share on other websites or claim as your work. Feel Free to flip,chop,colorize,embellish etc to match your project or model. Most of all...Enjoy!
Wings-Fractal 20-RMA-2008: Png Format. Much larger & more detailed than preview shows. Free for personal or commercial use. Do not share on other websites or claim as your work. Feel Free to flip,chop,colorize,embellish etc to match your project or model. Most of all...Enjoy!
Wings-Fractal 21-RMA-2008: Png Format. Much larger & more detailed than preview shows. Free for personal or commercial use. Do not share on other websites or claim as your work. Feel Free to flip,chop,colorize,embellish etc to match your project or model. Most of all...Enjoy!
Wings- Fractal23-RMA-2008: Png Format. Much larger & more detailed than preview shows. Free for personal or commercial use. Do not share on other websites or claim as your work. Feel Free to flip,chop,colorize,embellish etc to match your project or model. Most of all...Enjoy!
Wings-Fractal25-RMA-2008: Png Format. Much larger & more detailed than preview shows. Free for personal or commercial use. Do not share on other websites or claim as your work. Feel Free to flip,chop,colorize,embellish etc to match your project or model. Most of all...Enjoy!
TsutaTexture: New textures for Yamato's A3 Tsuta outfit...Sorry, there have been 2 versions of that outfit, but it's some time ago when I created this ...The only version I found is here: http://www.eurus.dti.ne.jp/~masasi/Service/indexE.html the old link has been here: http://www.juno.dti.ne.jp/~yamato-k/
A3 DarkAngel: "DarkAngel" a texture for Angel of Light by Canary3d available at Daz3d
Pale Fantasy Vampire: This is a texture expansion for my Pale/Pale Fantasy character. You will have to own one of those because there are only headtextures included! They will only work on Poser5 and up, because the matfiles include shader nodes! They are not tested in DazStudio!
Creed Hood texture: This is a little freebie ...it's a texture for the hood of Xena's Urban Warrior set (DAZ)I made this for myself while doing promos for my Creed texture for M4 Valiant by Ravnheart(DAZ). I needed a matching hood, but there isn't one available and I think the style of this one looks really great. You need Xena's Urban Warrior to use it! I hope someone will find it useful! happy rendering, Nicola
PythonMorph: These are 2 morphs for the PoserPython available at Daz Freestuff I needed this for an image the last days and I thought you may be interested, too. 1 morph is for the teeth. This is not very realistic, cause I think in natural snakes wont show their teeth and attack like this...anyway it's looking cool for fantasy renders ;-) The other morph is a very simple morph to make the tongue come out a bit...I tried my best in ZBrust, but the tongue was so small and I could get a better result, and I didn't want to spend too much time either. So, they are free and I hope you will find them useful and enjoy them...
New Color Chantal: This is my new Color Chantal Hair previously sold at RMP. I decided to give it away for free now. It's a set of 55 new and colorful textures for Chantal Hair by goldassel, SWAM & Zachrael 2002. This is a large file because of the high resolution of the textures.
M4 Teethmorph: This is a little freebie for my "Vruk" orc character. Included is the teethmorph I used in my promo images and 1 fantasy headmorph.
Extreme Free: This is a free sample of my Extreme Texture Set for Billy T's Leather Corset available at RMP. Includes 1 texture for the Corset and 1 texture for the pants.
So Trendy Street Chick Free: This is a free sample of my: "So Trendy SC" for Street Chick by Mytilus Included is 1 texture for the Top & 1 texture for the Pants. Both in .pz2 and .mc6 format.
Extreme Free Garter Belt: This is a free add on for my: "Extreme" for Billy T's Leather Corset Created by Nicola Yilmaz Copyright by Nicola Yilmaz Date of Creation: June 2009 Included are 10 matching textures for the Garter Belt.
V3-V4 Poses for Dendras Sets: DAZ Vicki3 and Vicki4 starting poses for various Dendras devices. Dendras models can be found at Renderotica. Poses were made in Poser 6.
Ramirez Clothing texture set for Apollo Maximus: Free Highlander-Ramirez Clothing texture set for Apollo Maximus' Epic Clothing Library Vol. 1 & 2 for Poser V5+. Please read the readme file and visit http://www.contentparadise.com/forums/showthread.php?t=6661 for details.
xXx-Xander Cage texture set for Apollo Maximus: Welcome to the Xander zone! This is a (mostly) movie accurate body texture set of Vin Diesel's character Xander Cage from Triple-X (or xXx). I've tiled the tattoos together from over 200 movie screenshots and promo images, then painted them by hand to a slightly modified version of Anton's already existing Apollo body texture. In the end there were just two things I had to guess about the tattoos (and the most interesting of those two were the crossed guns at the small of his back, which can never be seen in the movie but were described in several interviews). Please read the readme file to see how to use this, what exactly the single MAT poses are for, and also for everything else. An accompanying thread can be found here: http://www.contentparadise.com/forums/showthread.php?t=7147 Hope you have fun using your new breed of secret agent. ;) Best wishes, Sabine
Colors for the Highlander Ramirez clothing Set: This is an add-on to my 'Highlander Ramirez' clothing textures set, adding some color to them. The 'Highlander Ramirez' clothing textures are available here: http://www.sharecg.com/v/18496/poser/Ramirez-Clothing-texture-set-for-Apollo-Maximus for free, and are required in order to use this add-on.
Zandra for Alexa2: Witch type character, also includes fit and texture for free witch hat from Faeriedreams, includes texture for the sundress that comes with alexa2 and boots from the TR outfit for Alexa2. Hair texture for the hair that comes with Alexa2 is also included:-) Needed Files List and System Required: Poser 4.01 and up Alexa2 Sundress and Hair in Alexa Base pkg Morph Addon Pack by Dorkati Star Hat [FaerieDreams freebie] Alexa TR 3Dcommune
Snowflake for Alexa2: Elfish character for Alexa2, including 2nd skin
Display Boxes (for Poser): A set of two display boxes to show off your models: -A shelf-sized box for placing models on tables or shelves. -A free-standing box, with front label, suitable for museum-type displays. Includes obj, cr2/ rsr/ png, textures, templates, and full instructions on how to resize the boxes and your model. Models displayed inside the boxes are NOT included.
USS Excalibur: The USS Excalibur (non-canon Star Trek starship). Original Studio Max mesh by Rivers3D, Poser conversion by JHoagland. Includes obj, pp2, rsr/ png, and complete set of textures. Highly detailed mesh: 498,552 polygons; not scaled to the size of the Poser people.
Phalanx Robot Mech for Poser: Contains one Poser figure (obj, cr2, rsr/ png) and texture templates (gif). The model is UV mapped and colored white. Texture sets available separately- please click the "portfolio" link to find the textures.
Defender Robot Mech for Poser: The Defender Robot Mech from "Robotech: The Macross Saga". Includes Poser files (obj, cr2, rsr/ png), a full texture set, and texture templates.
Tomahawk Mech Robot for Poser: This is the base, untextured Tomahawk Mech Robot model, from "Robotech: The Macross Saga". It contains obj, cr2, rsr/ png, and texture templates. Textures are available separately- click the "portfolio" link to find them. Includes 6 missiles in the top hatch (parented to the figure) and 20 missiles in the chest hatches (also parented to the figure).
JAGDPanther for Poser: Introducing the first EVER Poser model to feature fully animate-able treads! Simply adjust the dial to move the treads forward and backward. Based on the Gunpoint-3d mesh, this file includes obj, cr2, rsr/ png, and basic textures. A stand-alone item: everything needed to use this model is included in the zip file.
Dalek (2005 version) for Poser: A fully posable Dalek figure, based on the ones seen in the new Doctor Who TV series. Arms and eye stalk rotate up/ down and left/ right, head and midsection can rotate, and the right arm can extend. Includes: obj file, cr2/ png/ rsr, metallic reflection map, a few texture maps, and MAT poses to change the color.
TARDIS for Poser: The Doctor`s TARDIS. Includes obj, cr2, rsr/ png, and textures. Newly updated: now a Poser figure instead of a prop front doors can open and close front phone door can open and close has better mapping includes new interior material (so the interior can be seen through the open doors)
Hedgemazes for Poser: A set of SIX (6) hedgemaze props. Yes, each maze has a solution from the entrance to the exit. Includes obj, pp2, rsr/ png for each hedgemaze. Please note that these props use displacement maps to simulate the hedges` leaves and are meant for use in Poser 5 and above.
Hedgemazes, Set 2 for Poser: A set of SIX (6) circular and semi-circular hedgemaze props. Yes, each maze has a solution from the entrance to the center of the maze. Includes obj, pp2, rsr/ png for each maze Please note that these props use displacement maps to simulate the hedges` leaves and are meant for use in Poser 5 and above.
Topiary Trees for Poser: This is a set of 5 topiary trees: "bird", "dinosaur", "dragon", "elephant", and "trisphere" for use in Poser 5 and above. These props use Poser`s displacement mapping to simulate leaves and grass and will not work properly in Poser 4 and ProPack. Includes obj, pp2, rsr/ png for each tree.
Blockade Runner for Poser: The Blockade Runner model from Star Wars. Includes Poser files: obj, cr2, rsr/ png and two textures/ MAT poses: Red (from Star Wars) and Blue (from Episode III). Original model by Sean Kennedy, converted to Poser format by JHoagland, hosted with permission.
Discovery for Poser: The spaceship Discovery from "2001: A Space Odyssey". This model is in Poser format and contains: obj, cr2, rsr/ png, and texture maps. Original model by Sean Kennedy, Poser conversion by JHoagland, and hosted with permission. The top dish can rotate around and tilt up/ down (with ERC dials on the BODY). This is a very large mesh, at over 304,000 polygons. Due to the complex mapping, no templates are included. Since there is no interior docking bay, the pod bay doors do not open.
Darth Vader's TIE Fighter for Poser: This a super-detailed model of the Darth Vader`s TIE Fighter... approximately 75,000 polygons in size! No textures are needed since all of the detail is built into the model. Original model by Sean Kennedy, Poser conversion by JHoagland, and hosted with permission.
AT-ST for Poser: The All Terrain Scout Transport, for Poser 4 and above. Legs, guns, head, and front two hatches are posable. No textures required. Scaled to the size of Poser people. Original mesh by shaderWolf, converted with permission.
Star Wars: R2 Astromech Droids: Build your own R2 unit from Star Wars! Includes base R2 figure and MAT poses for 10 different droids, including R2-D2. Figure has tons of moving parts, including rotating head, moving legs, opening front hatches, "sensorscope", and posable front arms. Zip file includes "standing", "walking", and "In X-Wing Fighter" poses. (X-Wing Fighter available separately, for free, at Vanishing Point.) Original model by John Jongsma, Poser conversion and MAT poses by JHoagland.
Star Wars: R3 Astromech Droids: Build your own R3 unit from Star Wars! Includes base R3 figure (with semi-transparent dome) and MAT poses for 10 different droids. Figure includes rotating head, moving legs, opening front hatches, and posable front arms. Zip file includes "standing" and "walking" poses. Original model by John Jongsma, Poser conversion and MAT poses by JHoagland.
Star Wars: R4 Astromech Droids: Build your own R4 unit from Star Wars! Includes base R4 figure and MAT poses for 10 different droids. Figure includes rotating head, moving legs, opening front hatches, and posable front arms. Zip file includes "standing" and "walking" poses. Original model by John Jongsma, Poser conversion and MAT poses by JHoagland.
Star Wars: R5 Astromech Droids: Build your own R5 unit from Star Wars! Includes base R2 figure and MAT poses for 10 different droids, including R5-D4. Figure has moving parts, including rotating head, moving legs, opening front hatches, and posable front arms. Zip file includes "standing" and "walking" poses. Original model by John Jongsma, Poser conversion and MAT poses by JHoagland.
Star Wars: R6 Astromech Droids: Build your own R6 unit from Star Wars! Includes base R6 figure and MAT poses for 10 different droids. Figure has moving parts, including rotating head, moving legs, opening front hatches, and posable front arms. Zip file includes "standing" and "walking" poses. Original model by John Jongsma, Poser conversion and MAT poses by JHoagland.
Star Wars: R7 Astromech Droids: Build your own R7 unit from Star Wars! Includes base R7 figure and MAT poses for 10 different droids. Figure has moving parts, including rotating head, moving legs, opening front hatches, and posable front arms. Zip file includes "standing" and "walking" poses. Original model by John Jongsma, Poser conversion and MAT poses by JHoagland.
SDF-1 for Poser: The flagship of Robotech: The Macross Saga... the SDF-1, now as a Poser figure. Includes obj, cr2, rsr/ png, and procedural textures. Not scaled to the size of the Poser people (obviously, since it`s 1,210 meters long). Can transform between spacecruiser mode and robot mode: two pose files are included. For use in Poser 5 and above: This model uses procedural shaders instead of texture maps and will not look correct in Poser Pro Pack, Poser 4, and below. Original model by mechmaster, Poser conversion by JHoagland.
Destroid Monster for Poser: The Destroid Monster Mech Robot from "Robotech: The Macross Saga". Includes one Poser figure (obj, cr2, rsr/ png) and texture templates (gif). The model is colorized and UV mapped. Texture sets are available separately- click the "portfolio" link above to find the textures.
Viper MK2 for Poser: The Colonial Viper MK2 from the new "Battlestar Galactica" series. Scaled to the size of the Poser, this item includes obj, cr2, rsr/ png and texture files. Original mesh by Sean Kennedy; Poser conversion by JHoagland (converted with permission). Due to the advanced surface texturing, this model is for use in Poser 5 and 6. It may work in Poser 4, but it won`t look very good.
Cygnus for Poser: The USS Cygnus, from "The Black Hole", as a Poser model. Includes obj, cr2, and rsr/ png files. No textures are needed- the detail is built into the mesh of the model. Also includes "lights on" and "lights off" MAT poses. Not scaled to the size of the Poser people. This is a large, highly-detailed model with over 84,000 polygons.
Galaxy Quest NSEA Protector: The NSEA Protector, from the movie "Galaxy Quest", as a Poser model. Includes obj, pp2, rsr, and a basic texture set. Not scaled to the size of the Poser people.
Blue Thunder for Poser: The Blue Thunder helicopter as a Poser figure file. Includes obj, cr2, rsr, and basic textures. Lots of moving parts: upper blades, rotating main gun, doors, etc.
TIE Fighter for Poser: The TIE Fighter, from "Star Wars", "The Empire Strikes Back", and "Return of the Jedi" as a Poser prop. Includes obj, pp2, rsr, and texture template. No textures are needed- all the detail is built into the mesh. Not scaled to the size of the Poser people and there are no moving parts.
TIE Interceptor for Poser: The TIE Interceptor, from "Return of the Jedi", as a Poser prop. Includes obj, pp2, rsr, and texture template. No textures are needed- the detail is modelled into the mesh. Not scaled to the size of the Poser people and there are no moving parts.
Aliens Colonist Complex: The LV-426 Colonist Complex from the movie "Aliens". Contains the following models: Atmosphere Processor, Northlock Building, Single Unit Building, Seeker Vehicle, Scraper Vehicle, Service Robot, Stormwall, Landing Field, Fuelling Station, Decompression Chamber, and Three Containers. Includes obj, cr2, pp2, rsr, and all textures for these models.
Weapons Rack: A weapons rack from the movie "Aliens". Includes obj, pp2, rsr/ png, and textures.
Aliens Powerloader: The Powerloader from the movie "Aliens". Fully posable and instructions are included on how to pose the Powerloader with the Poser human figure. Includes obj, cr2, rsr/ png, textures, and pose for human figure.
Aliens Sulaco: A Poser model of the main ship, the Sulaco, from the movie "Aliens". Includes obj, pp2, rsr/ png, textures, and a small Dropship model.
Aliens Smartgun: A marine "Smartgun" from the movie "Aliens". Includes obj, cr2, rsr/ png, textures, and a pose for the P4 female (which can be adapted to other figures).
Aliens M41 Assault Rifle: The marines' M41 Assault Rifle, from the movie "Aliens". Includes obj, cr2, rsr/ png, textures, poses, and a flash prop.
Sonic Screwdriver for Poser: A Poser model of Doctor Who's Sonic Screwdriver (from the original series). Contains obj, pp2, rsr/ png, and metal reflection map.
AT-AT for Poser: The All-Terrain Armored Transport (AT-AT) from "The Empire Strikes Back", as a posable Poser figure. All four legs can be posed and the head can turn. Contains obj, cr2, rsr/ png, and no textures are needed.
Imperial Shuttle for Poser: The Imperial Shuttle (from "Return of the Jedi") as a Poser figure. Wings can rotate up/ down, ramp can open and close, and the landing gear can be hidden or shown (using Poser's Hierarchy Editor). Contains obj, cr2, rsr/ png, and no textures are needed.
Star Destroyer for Poser: The Star Destroyer (from "Star Wars") as a Poser prop. Contains obj, pp2, rsr, and no textures are needed. Note: this is *not* scaled to the size of the Poser people.
Draconian Marauder: The Draconian Marauder (from "Buck Rogers in the 25th Century"). Contains obj, pp2, rsr/ png, glass reflection map, textures, and templates.
Buck Rogers Starfighter: The EDF Starfighter (from "Buck Rogers in the 25th Century") as a Poser model. The canopy opens and closes, the front landing gear can be hidden or shown, and scaled to the size of the Poser people. Contains obj, cr2, rsr/ png, complete texture set, texture templates, and two poses: "in flight" and "landed".
Thunderbird 1: The Thunderbird 1 vehicle as a Poser figure. Includes move-able swing wings and landing gear which can be hidden. Includes obj, cr2, rsr, one texture set, and hide/ show poses for the landing gear.
Thunderbird 2: Includes the Thunderbird 2 vehicle, separate cargo container (with opening door), and MAT poses to change number on container door. Includes obj, cr2, rsr, texture set for the ship, and six textures/ MAT poses for the cargo container.
Thunderbird 3: The Thunderbird 3 vehicle, from the TV series (and 2004 movie), as a Poser prop. Includes obj, pp2, and one texture set.
Lightcycles: Contains 4 Lightcycles and 4 "light walls" (red, yellow, orange, and blue). Includes obj, pp2, and rsr files. No textures are needed.
Cassandra: A Poser figure based on The Lady Cassandra character from the 2005-series Doctor Who episodes "The End of the World" and "New Earth". Includes obj, cr2, rsr/ png, and textures.
Toy Boxes: This is a set of 3 "blister toy packages" and 1 "toy box", which can be used to display your favorite Poser "dolls" and "action figures". Includes 3 Poser figures: obj, cr2, png/ rsr. Includes 3 textures and MAT poses for each "blister package" and the "toy box".
Veritech Cockpit: A model based on the Veritech Cockpit, from "Robotech". This model is scaled to the Poser people, though you may have to fine-tune the size of the cockpit or your Poser figure. Includes obj, pp2, rsr/ png, and textures. (Since this is a prop, there are no moving parts.)
Brick Enterprise 1 (for Poser): A Poser prop of the Enterprise NX-01, from Star Trek: Enterprise. The `bricks` in this model are scaled to the same size as the other Modular Brick models, so this vehicle is not `actual size`. Built from instructions found on the Brick Commander website. 12453 polygons, UV mapped
Stormtrooper Armor: A re-upload of the Stormtrooper armor, this zip file contains the following: -Includes all armor pieces (arms, legs, chest) and helmet, backpack, blaster gun, orange shoulder armor, and two belt pouches. Boots are not included since no boots were made for this set armor; however, any set of boots painted white should match the armor. -Armor pieces are designed for use with Mike 2. They may work with other figures with some adjusting. -Includes textures to make a set of "clean" armor and a set of "dirty" armor. Also includes bump maps to match the "dirty" textures. -Also includes black sub-dividing MAT pose for Mike 2 to simulate a black bodysuit beneath the armor. -For Poser 4 and above. -Original mesh and conversion by ravenwing75. Hosted and redistributed with the permission of the original artist. -This item is for non-commercial projects only. All copyrights and designs owned by LucasFilm.
Brick USS Voyager (for Poser): A Poser figure of the USS Voyager, from Star Trek: Voyager. Includes obj, cr2/ png. The engines can rotate up and down (with an ERC dial on the BODY). The `bricks` in this model are scaled to the same size as the other Modular Brick models, so this vehicle is not `actual size`. Built from instructions found on the Brick Commander website. 20639 polygons, UV mapped
Modular Brick Humvee (for Poser): A military modular brick Hummer vehicle. 30033 polygons -Wheels can rotate (with an ERC dial on the BODY) -Steering wheel can rotate (with an ERC dial on the BODY) -Doors don`t open
Brick Bus 1 (for Poser): A modular brick bus with a colored striped design. 75456 polygons Striped coloring created with colored "bricks". -Wheels can rotate (with an ERC dial on the BODY) -Steering wheel can rotate (with an ERC dial on the BODY)
Modular Brick SUV (for Poser): A modular brick SUV. Includes obj, cr2/ png. 17652 polygons -Wheels can rotate (with an ERC dial on the BODY) -Steering wheel can rotate (with an ERC dial on the BODY) -Right and left doors can open (with an ERC dial on the BODY)
Neira (V4) (for Poser): She's versatile, she's beautiful, she can be dangerous too.With many makeup options you can easily transform her into a sci-fi gal, fantasy warrior, dark mistress, Gothic girl or any other character you can think of. She has strong, slim body with three textures: default, with scars and with arm tattoos. There are total of 15 makeup options - 10 for default skin and 5 for skin with scars, 7 eye options plus default, 3 lashes options, 7 lips options.As a bonus you get two lights in which Neira's skin looks best..: Product Features :.* Full Body Inject and Remove poses* Head Inject and Remove poses* Skin MAT pose* Skin with Scars MAT pose* Skin with Tattoos MAT poses* 7 Eye MAT poses* 3 Lashes MAT poses* 7 Lips MAT poses* 10 Makeup MAT poses* 5 Makeup with Scars MAT poses* 2 Lights3rd party products needed:Victoria 4.2 BaseVictoria 4.2 Morphs++V4 Elite Body ShapesClothing, hair, and poses not included.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Shiobhan (V4) (for Poser): Shiobhan is your woman for romantic, vintage, classic renders. Her beautifully curved body, subtle smile and big eyes make her perfect for classic portraits as well as full body scenes..: Product Features :.* Full Body Morph Injection and Removal poses* Head  Morph Injection and Removal poses* Skin MAT pose* Skin with Tattoo MAT pose* 10 Eye MAT poses* 4 Lash MAT poses* 8 Lip MAT poses* 10 Makeup MAT poses* 6 Nail MAT poses3rd party products needed:Victoria 4.2 BaseVictoria 4.2 Morphs++V4 Elite Body ShapesClothing, hair, and poses not included.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
PICK Keeping Time for Poser: This clock set is the perfect addition to the P.I.C.K. line of products.Providing you with 4 clocks to expand your creative possibilities with P.I.C.K..: Product Features :.* 4 Poser figure files (obj, cr2/ png):- Carriage Clock, at 3,578 polygons.- Long Case Grandfather Clock, at 15,243 polygons.- Long Case Corner Grandfather Clock, at 15,543 polygons.- Modern Wall Clock, at 270 polygons.New!These models were originally offered as static props, but they've been upgraded!All of these models have been converted to Poser figures with moving parts:* Both clock hands can rotate.An ERC dial on the Body accurately rotates both clock hands: as you turn the dial, the hour hand moves 1/12 as fast as the minute hand so one complete revolution of the minute hand corresponds to one hour's movement of the hour hand.* The pendulum on the grandfather clocks can rotate left-right, with an ERC dial on the Body.* The handle on the carriage clock can rotate front-back, with an ERC dial on the Body.Although designed for use with the P.I.C.K. (Poser Indoor Creation Kit), that set is not required to use this one.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Deanah for V4 for Poser: A beautiful fantasy character and texture set for Victoria 4.2.In the dark lands, in mystic forests, between dead sea and misty mountains she wanders, in search of her past. Deanah, dark fairy, warrior, the soldier of fortune. Her tribe died off but there are legends alive and within these legends she hopes to find her legacy. Lonely and mysterious, strong and tough yet beautiful in her own dark way... let her wander through your runtime and make your fantasy renders mysteriously beautiful.There are two skin mat options - default and with engravings. 12 MU options total - 6 for default skin and 6 for engraved skin (these are the same as for default skin to ensure consistent look). 8 fantasy eyes options with black, green and light sclera. Reflections are dependent on light source and direction to ensure realistic look.Tip: while rendering Deanah use lights in blueish, cold tones that will bring out Deanah's unusual skin tone and allow for best eye reflections..: Product Features :.* Full Body Inject and Remove pose files* Head Inject and Remove pose files* Skin Default* Skin Engraved* 8 Eye Materials* 3 Lash Materials* 8 Lip Materials* 12 Makeup Materials3rd party products needed:Victoria 4.2 BaseVictoria 4.2 Morphs++V4 Elite Body ShapesClothing, hair, and poses not included.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Katya for V4 for Poser: Katya will sure add beauty and elegance to your Runtime. Her head morphs were carefully created using old masters rules for classic beauty but with a modern twist. Perfect for just about any render, be it romantic portrait, fantasy battle scene, fairy realm or simple casual render, Katya will always follow your dreams and will fit in any scene you wish to use her for. Versatile and beautiful. Her skin was designed to add extreme realism to your renders almost effortlessly - materials have been optimized in Material room to reflect lights in a way that it ensures you will not get a plastic look, so often present in 3D art. There are no special shaders that you should use but we highly recommend using IDL for renders with Katya. Alternatively, Subsurface Scattering in Poser Pro that will just make Katya's skin so realistic you will want to touch it.Beautifully shaped lips have a gloss effect.Katya's eyes reflect light realistically and reflections follow the light in your scene. Please refer to Usage Instructions section of this ReadMe file for Tips&Tricks.Additionally included are 4 poses for Katya that show her delicate nature.Promo images were rendered in Poser 8 with Firefly engine and IDL and in Poser Pro2012 with Subsurface Scattering on..: Product Features :.* Body Morph INJ/REM poses* Head Morph INJ/REM poses* Full Body MAT Poses* 10 Eye Colors Including Default MAT poses* 10 Lips Colors Including Default MAT poses* 10 Head Make Up Options Including Make Up Off* Nail Art MAT Pose for French Manicure* Long Nails Option INJ pose* Nails Default Option INJ Pose* 4 Body Poses* 39 High Resolution Textures3rd party products needed:Victoria 4.2 BaseVictoria 4.2 Morphs++V4 Elite Body ShapesClothing, hair, and poses not included.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
PICK Lockers Expansion for Poser: The P.I.C.K. Lockers Expansion Set is an add-on for the Poser Indoor Creation Kit (P.I.C.K) .: Product Features :.* 1 base component (3D models - .PP2 and .OBJ formats)* 6 door components (3D models - .PP2 and .OBJ formats)* 4 window components (3D models - .PP2 and .OBJ formats)* 8 locker components (3D models - .PP2 and .OBJ formats)* 2 benches (3D models - .PP2 and .OBJ formats)* 2 coat hangers (3D models - .PP2 and .OBJ formats)* 1 pipes component (3D models - .PP2 and .OBJ formats)* additional floor and wall tiles (.MC6)* Highly detailed in both textures and models.* Modeled in exact scale to "reallife" elements.* Running up tag numbers for the lockers* 3 different door styles for the lockers* Doors, windows and locker doors poseable Includes a sample scene file so you can quickly get started. Designed for use with the P.I.C.K. (Poser Indoor Creation Kit).Note: the scene file in this product references files uses in the P.I.C.K. Base product. For use in Poser 6 and above. Content originally created by, and acquired from YURDigital.
Medieval Townsman (M4) (for Poser): Whether you're wandering around a medieval town or a fantasy city, do it in style with this set of townsman clothing.Product Features:* Includes the following conforming Poser figures: (obj, cr2/ png):- Belt, at 1,047 polygons.- Boots, at 16,436 polygons.- Shirt, at 7,764 polygons.- Trousers, at 1,011 polygons.- Waistcoat, at 9,828 polygons.- Wristcuffs, at 304 polygons.Each clothing is a separate figure, which makes it easy to add or remove pieces that you need..: Morphs :.* Includes the following morphs to fit your M4 character:BeerBellyBellySmoothBellyThicknessBellyThinBodyBuilderBulkChestBuiltChestDiameterChestDroopChestFlattenChestLargeChestMassiveChestSizeChestSmallChestSternumDefinitionEmaciatedGluteSizeHeavyInhaleSmoothSuperHeroThighsThicknessThighsToneThinTorsoThicknessTummyOutWaistWidthYoungRequires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ.Since this is full-body clothing, you shouldn't need morphs on M4.Textures:* One set of texture maps, at 2048x2048 pixels with corresponding normal/ bump maps.* Includes five material collection files to change the color of the Shirt:- Blue- Brown- Green- White (default)- YellowOr change the object color to suit the needs of your scene.This product is designed for use in Poser 6 and above.Original model by Arteria3D and uploaded for sale here with full permission.
Wharf Building (for Poser): This is a model of a typical building found near a wharf or docklands. Signs on the building advertise the local fisheries and other boating services.All 4 sides of the buildings are detailed, which means you can add additional copies to the scene, and rotate it and reposition it to quickly create a village.Product Features:* Poser figure file: obj, cr2/ png with 23,204 polygons.* Buildings are separate body parts which can be hidden or shown to suit the needs of your scene.* This is a facade only and there are no opening doors or windows.Textures:* One set of texture maps, ranging from 1024x1024 pixels to 2048x2048 pixels.* Also uses Poser shaders for extra detailing.All sales images rendered in Poser Pro 2012.Designed for use in Poser 6 and above. DAZ Studio version sold separately.Original model by Double Impact Studios and sold here with permission.
P.I.C.K. Spiral Stairs (for Poser): The P.I.C.K. Spiral Stairs set is designed to add more variation to your multiple level scenes. In addition to the stairs components themselves we added round 'corner' walls for both one level and multiple level scenes..: Product Features :.* 30 components (3D models - .PP2 and .OBJ formats)* 106 preset materials (.MC6)* Highly detailed in both textures and models* Modeled in exact scale to "reallife" elements.Designed for use with the P.I.C.K. (Poser Indoor Creation Kit).For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Sci-Fi Brig (for Poser): This is a futuristic prison/ brig/ jail, perfect for holding prisoners.And if you're feeling mean, you can remove the pillow and mattress, or even the bed!A stand-up console lets your crewmen monitor the prisoner while also maintaining control over the cell.Product Features:* Includes one Poser figures (obj, cr2/ png), at 69,453 polygons.* Doors can open and close, with an ERC dial on the Body.* The console stand is a separate part which can be repositioned or hidden/ show to suit the needs of your scene.* The bed frame, mattress, and pillow are separate parts which can be hidden or shown.- The pillow can be repositioned in the scene.Note: Although the right doors can open and close, there are no hallways on the other side of the doors.We recommend using your own hallways or purchasing a set where you bought this model.Poses:* Hide/ show each wall and the ceiling.* Hiding and showing the left wall hides and shows the left doors, hiding the right wall hides and shows the right doors.Force Field Colors:* Ambient neon-style colors:(These help illuminate the scene when the render option for Indirect Lighting (IDL) is turned on.)- Blue- Green- Orange- Red- White* Flat colors:- Blue- Green- Orange- Red- White* Off (turns both lights to black)* Or adjust the object color to whatever best suits the needs of your scene.Textures:* One set of textures is included.* This model uses Poser`s shader nodes for extra detailing.Cameras:* Nine camera files are included.* The camera files also hide any walls which may be blocking the camera.* Use these to render your scene or as a starting point.All of the sales images were rendered in Poser Pro 2012 using a combination of lights and Indirect Lighting (IDL).Recommended for use in Poser 6 and above; has not been tested in DAZ Studio.Original model created by Richard Duda and Poser optimization by John Hoagland.
Cargo Bay 02 (for Poser): A smaller cargo bay for all of your sci-fi scenes.Includes a main bay for spaceships to land in, a pressurized cargo door, and side doors for your crew to enter and exit.Booths on the upper left and right walls let your crew members monitor the situation for any safety procedures.Two consoles on the ground floor and two consoles on the upper floor allow your crew to examine any cargo or inventory anything that's brought into the ship.Includes an exterior front wall and front hatch so you can make scenes showing spaceships entering or leaving the cargo bay.Bonus: two crates are included: a hexagonal tall crate and an oblong horizontal crate.Product Features:* Includes three Poser figures (obj, cr2/ png):- Cargo Bay 02 (room), with 47,472 polygons.- Crate 1, with 2,946 polygons; no moving parts.- Crate 2, with 4,606 polygons; no moving parts.* Cargo Bay 02 moving parts:- Large main door can open upwards, with an ERC dial on the Body.- Left and right lower main doors can open and close, with ERC dials on the Body.- Left and right, forward and rear, upper doors can open and close with ERC dials on the Body.- Left and right lower consoles are separate parts which can be repositioned (or hidden/ shown) to suit the needs of your scene.- Left and right upper consoles are separate parts which can be repositioned (or hidden/ shown) to suit the needs of your scene.Note: Although all of the lower and upper doors can open and close, there are no hallways on the other side of the doors.We recommend using your own hallways or purchasing a set where you bought this model.Poses:* Hide/ show each wall and the ceiling.* Hiding and showing the left wall hides and shows the left doors, hiding the right wall hides and shows the right doors.Cameras:* Twelve camera files are included.* The camera files also hide any walls which may be blocking the camera.* Use these to render your scene or as a starting point.Textures:* One set of textures is included.* This model uses Poser`s shader nodes for extra detailing.* All of the monitor screens use their own texture map, which makes it easy to change the screens and customize the room to suit the needs of your scene.All of the sales images were rendered in Poser Pro 2012 and were created using the included camera files.Recommended for use in Poser 6 and above; has not been tested in DAZ Studio.Original model created by Richard Duda and Poser optimization by John Hoagland.
B-1B Bomber (for Poser): Product Features:* Poser figure: obj, cr2/ png.* Tail rudder can rotate (with an ERC dial on the BODY).* Main wings can swing back (with an ERC dial on the BODY).* Landing gear can open and close (with an ERC dial on the BODY.)* Landing gear doors can open and close (with an ERC dial on the BODY).-A delayed ERC dial on the BODY affects both the landing gear and landing gear doors.* Two sets of left and right wing flaps can rotate up and down.-An ERC dial on the BODY raises or lowers both flaps.-A second ERC dial on the BODY raises or lowers the flaps opposite each other for banking turns.* Low-polygon textured pilot and co-pilot models are included- these are separate parts which can be hidden or shown, depending on the needs of your scene.-These were included so you can have people in your aircraft without adding a fully textured and clothed M4 figure to the scene.* Includes a low detail cabin/ cockpit, which is meant for use in exterior shots.* The canopy does not open since this type of aircraft does not have an opening canopy.Poses:* Hide/ show landing gear, which also opens and closes the landing gear doors.* Hide/ show pilots.Textures:* Uses texture, bump, and specular maps (instead of shader nodes).* Texture templates are not included; if you want to make your own textures, use the existing textures as guidelines.
Navy Generator Unit (for Poser): The AM32-86 Ground Power Unit is used ship-board and at land facilities to provide electrical power to aircraft prior to engine start up and for electronics/systems maintenance. The manufacturer of this cart also produces them for the civilian aircraft market. Features: The cart is fully detailed with spinning wheels, control panel cover, generator engine covers, and a pose-able smart-parented cable prop to use with aircraft. It conforms to the free Aircraft Tug, or can be used on its own for your Aircraft Carrier or Air Field scenes. Moving parts include wheels, control panel cover, engine covers and support rods, and smart-parented pose-able power cable prop. Includes a smart-parented cable prop that is fully pose-able and will attach to the side of the cart. Select the cart in your scene before loading this prop so that they can smart-parent properly. The cable can also smart parent to the other trailers for the Aircraft Tractor (though it will need to be manually positioned to line up properly with the various cart types)! ERC dials for ease of use! Original model by Chris Schell and uploaded here with permission.
Elfblade V4 (for Poser): Clothing Models:* HatMorphs:-FBMBulk* BeltMorphs:-FBMBulk-PBMHipsSize-FBMThin-PBMWaistWidth* BootsMorphs:-FBMBulk-PBMShinsThickness-PBMThighsThickness-PBMThighsTone-FBMThin-JCMThighBendFrontL-JCMThighBendFrontR* Cape:This is a parented-figure which includes ERC dials to control the bend, twist, and side-to-side movement.* GlovesMorphs:-PBMBicepsFlex-FBMBulk-PBMForearmsThickness-PBMShouldersThickness-FBMThin-JCMElbowBendL-JCMElbowBendR* TopMorphs:-PBMBreastsCleavage-PBMBreastsCleavageWidth-PBMBreastsDiameter-PBMBreastsDroop-PBMBreastsFlatten-PBMBreastsHangForward-PBMBreastsImplant-PBMBreastsLarge-PBMBreastsNatural-PBMBreastsPerk-PBMBreastsSize-FBMBulk-PBMLatsSize-FBMThin* SkirtMorphs:-PBMBellyThickness-FBMBulk-PBMGlutesSize-PBMHipsSize-FBMThin-PBMWaistWidthTextures/ Colors:* Green and red (default color scheme)* Yellow* Blue* BlackMix and match colors to make new combinations!Does not use Poser`s procedural nodes: the texture is a combination of the object color, bump maps, and reflection maps.All objects are UV mapped and templates are included.Bump map and reflection map included.Requires the previous download and installation of Vicky 4.2 from DAZ.
PICK Bath and Shower for Poser: The second P.I.C.K. expansion set will make all the difference in your Poser scenes. With detailed modeled components of real life items Bath & Shower brings extreme realism to Poser within the P.I.C.K. toolkit. Small bathrooms, big bathrooms, bath houses, gym showers, whatever your idea is, P.I.C.K. Bath & Shower provides you with the tools to build your bathroom with great accuracy and realism. .: Models :.Includes the following (obj, pp2/ png):* 1 corner wall component* 1 divider component* 1 sink component* 2 cabinet components* 1 towel component* 1 toilet component* 1 whirlpool component* 2 bath components* 1 shower cubicle component* 1 bonus P.I.C.K. Locker Expansion Set shower component* 3 additional wall tiles Features:* Highly detailed in both textures and models* Modeled in exact scale to "reallife" elements* Shower door, cabinet doors, toilet seat and lid poseable* Bath bubbles on and off MAT's* Taps water on and off MAT's* Shower on and off MAT's Designed for use with the P.I.C.K. (Poser Indoor Creation Kit). For use in Poser 6 and above. Content originally created by, and acquired from YURDigital.
P.I.C.K. Dining Set (for Poser): This dining set is the perfect addition to the P.I.C.K. line of products.Providing you with a chair and table to expand your creative possibilities with P.I.C.K..: Product Features :.* Includes 2 models in Poser prop format (obj, pp2/ png)- Chair, at 3,282 polygons- Table, at 2,322 polygons* 5 Material Settings (mc6/ png)* 4 Presets to help you quickly build your scene:- Table with 4 chairs- Table with 2 side chairs- Table with 2 end chairs- Table with 6 chairsVery detailed meshes!!Although designed for use with the P.I.C.K. (Poser Indoor Creation Kit), that set is not required to use this one.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Medieval Archer (M4) (for Poser): Dress your characters in this set of fantasy clothing. Perfect for military or medieval scenes.Product Features:* Includes the following conforming Poser figures: (obj, cr2/ png):- Belt, at 3,140 polygons.- Boots, at 8,124 polygons.- Chest Belt, at 3,140 polygons.- Gloves, at 9,418 polygons.- Hoodie, at 4,421 polygons. (No shape morphs are needed.)- Pendant, at 1,730 polygons. (Does not include any shape morphs.)- Shirt, at 2,435 polygons.- Trousers, at 680 polygons.Each clothing is a separate figure, which makes it easy to add or remove pieces that you need..: Morphs :.* Includes the following morphs to fit your M4 character:BeerBellyBellySmoothBellyThicknessBellyThinBodyBuilderBulkChestBuiltChestDiameterChestDroopChestFlattenChestLargeChestMassiveChestSizeChestSmallChestSternumDefinitionEmaciatedGluteSizeHeavyInhaleSmoothSuperHeroThighsThicknessThighsToneThinTorsoThicknessTummyOutWaistWidthYoungRequires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ.Since this is full-body clothing, you shouldn't need morphs on M4.Textures:* One set of texture maps, at 2048x2048 pixels with corresponding normal/ bump maps.* Includes five material collection files to change the color of the Hoodie and Shirt:- Blue- Brown- Green (default)- White- YellowOr change the object color to suit the needs of your scene.This product is designed for use in Poser 6 and above.Original model by Arteria3D and uploaded for sale here with full permission.
Medieval Street (for Poser): This is a small street of medieval-style buildings. Perfect for fantasy or romance scenes.Includes 4 main buildings, a street/ ground, two wall sections and two gates.The buildings include stairs and balconies for more scene-creation options: pose your characters anywhere you like!Product Features:* Poser figures: obj, cr2/ png:- Building A, with 10,338 polygons.- Building B, with 3,768 polygons.- Building C, with 6,892 polygons.- Building D, with 2,947 polygons.- Path/ Ground, with 94 polygons.- Wall Section A, with 170 polygons.- Wall Section B, with 170 polygons.- Wall Section Door A, with 50 polygons.- Wall Section Door B, with 50 polygons.Includes 1 preset to help you quickly build your scene... or add the individual models and create your own town layout.These are exterior buildings with no moving parts and no interiors.Textures:* One set of texture maps, ranging from 4096x406 to 2048x2048 to 1024x1024 pixels with corresponding normal/ bump maps.This product is designed for use in Poser 6 and above. All images rendered in Poser Pro 2012.Original model created by Arteria3D.
P.I.C.K. French Doors (for Poser): This French Door expansion pack is the perfect addition to the P.I.C.K. line of products.Providing you with all new doors to expand your creative possibilities with P.I.C.K..: Product Features :.* Small French doors component (3D model - .PP2 and .OBJ formats)* Big French doors component (3D model - .PP2 and .OBJ formats)* Center Door Component (3D model - .PP2 and .OBJ formats)Highly detailed meshes!!Doors open and close and door handles rotate.Although designed for use with the P.I.C.K. (Poser Indoor Creation Kit), that set is not required to use this one.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Millennium Falcon from Star Wars: The Millennium Falcon for Poser.This version is from "The Empire Strikes Back" and was originally made by Andy Crook.This model is a rigged Poser figure and it's scaled to the size of the Poser people: about 34.74 meters/ 114 feet long.Moving parts: Radar dish: up/ down and rotate Upper gun: up/ down and rotate Lower gun: up/ down and rotate Entry ramp: up/ down, with an ERC dial on the Body. Landing gear doors: open/ close, with an ERC dial on the Body. Landing gear: up/ down, with an ERC dial on the Body. Notes:This model is meant for exterior shots: there is no interior and a very basic cockpit.This is a HUGE model, with over 528,544 polygons. We suggesting using a later version of Poser, such as Poser Pro 2010/ Poser 10 or above.Textured with texture maps only: all of the surface detail is modelled and no Poser shaders are used on the model.Texture maps range in size from 934x934 to 2000x2000, so you may need to adjust your render settings.Original model by: Andy CrookMesh cleanup, including splitting multi-point polygons and removing double-sided polygons, and Poser rigging by: JHoagland.
Liliana (V4) (for Poser): A beautiful texture and character set for Victoria 4.2.Dark and beautiful, she wears black makeups with violet tones to express her mysterious personality. Tough looking with detailed tattoos covering her body, she can be delicate and fragile inside... but you never know! She's perfect for Gothic renders as well as action renders when she can fully show strength in her slim, well shaped body.Choose from many material options included to create your art..: Product Features :.* Body Inject and Remove poses* Head Inject and Remove poses* Skin MAT poses* Skin Tattoos MAT poses* Limbs Tattoos MAT poses* Torso Tattoos MAT poses* 8 Eye MAT poses* 4 Lashes MAT poses* 8 Lips MAT poses* 15 Make-up MAT poses* 8 Nails MAT posesPromotional images 5, 6, 7, 8, 9 and 10 provided by Sympatico Studio.3rd party products needed:Victoria 4.2 BaseVictoria 4.2 Morphs++V4 Elite Body ShapesClothing, hair, and poses not included.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Horror Investigator (M4) (for Poser): There's a mystery afoot so dress your M4 character in the finest investigation outfit.Great for horror, vintage, steampunk, historic, police, or detective scenes!Product Features:* Includes the following conforming Poser figures: (obj, cr2/ png):- Bag, at 800 polygons.-- Includes two versions: on the left side and the right side.- Hat, at 1,432 polygons.- Jacket with waist coat, at 8,240 polygons.- Shoes, at 460 polygons.- Tie, at 18 polygons.- Trousers, at 3,086 polygons.Each clothing is a separate figure, which makes it easy to add or remove pieces that you need..: Morphs :.* Includes the following morphs to fit your M4 character:BeerBellyBellySmoothBellyThicknessBellyThinBodyBuilderBulkChestBuiltChestDiameterChestDroopChestFlattenChestLargeChestMassiveChestSizeChestSmallChestSternumDefinitionEmaciatedGluteSizeHeavyInhaleSmoothSuperHeroThighsThicknessThighsToneThinTorsoThicknessTummyOutWaistWidthYoungThe hat doesn't have any shape morphs because M4's head doesn't have any shape morphs.Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ.Since this is full-body clothing, you shouldn't need morphs on M4.Textures:* One set of texture maps, at 2048x2048 pixels with corresponding normal/ bump maps.- The jacket texture/ bump maps are 4096x4096 pixels.This product is designed for use in Poser 6 and above.Original model by Arteria3D and uploaded for sale here with full permission.
PICK Base for Poser: The Poser Indoor Creation Kit, or "PICK", was designed for the accurate, realistic and flexible creation of indoor Poser scenes. The components were modeled to seamlessly integrate with each other while giving the flexibility to create the room YOU want. Modeled in exact scale with extreme accuracy in both models and textures PICK provides the "tools" needed to set up a realistic indoor scene within minutes. Whether you want a small bedroom, a large ballroom or a corridor PICK allows you to build the scene you have in mind rather then being stuck with preset sets. .: Models :.Includes the following (obj, pp2/ png):* Base:- Center Door- CenterA- CenterB- CenterC- CenterD- CenterE- WallA- WallB- WallC* Doors:- DoorA_L- DoorB_L- DoorC_L- DoorD_L* Extras:- Blinds- CurtainA- CurtainB- CurtainC- Radiator* Windows- WindowA- WindowB- WindowC .: Material Files :.Includes material files to recolor all of the models... too numerous to list! Also includes a full HTML manual with instructions so you can quickly position the pieces and create your own sets. For use in Poser 6 and above. Content originally created by, and acquired from YURDigital.
Abbey In Ruins: Monastery (for Poser): What was once a thriving monastery has fallen into disrepair. The monks have long gone and all that`s left are these ruins. Are they haunted, cursed, or are they still holy land? Your images will tell its new story!Product Features:* Poser figure: obj, cr2/ png, with 21,553 polygons.* Includes the following parts, which can be hidden or shown:- Base terrain- 18 Walls- Stairs- Underground columnsTextures:* One set of texture maps, at 4096x4096 pixels with corresponding normal/ bump maps.* Large texture maps make it perfect for close-up and medium-range shots.Cameras:* 16 camera files are included.(Unlike our other sets, none of walls will block a camera, so no hide/ show poses are needed.)All sales images rendered in Poser Pro 2012 using the included camera presets.This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio, but since there are no moving parts and no shader nodes, there should not be any issues when importing.Original model by Arteria3D and uploaded for sale here with full permission.
Watson (for Poser): A detective character to help solves any mysteries you might have...Product Features:* Stand-alone Poser figure (obj, cr2/ png), at 105,740 polygons* Mouth & face morphs:-Open Mouth-Smile-Anger-Surprise-Fear-Close Eye* Objects... which are parented to the figure:-Cap-Walking Stick-Hair-Scarf-Sunglasses* Poses:-Kick Forward (animated pose)-Stand* Textures for the body, cap, head, hair, and all clothes.Original model created by Moscowich80. Uploaded for sale here with her full permission.
Shanti (V4) (for Poser): Delicate, with subtle smile, Shanti is your girl for romantic renders. With her fantasy makeups and two tattoo options, she can easily become a fantasy character. Dress her in leather and metal - and you have a beautiful yet dangerous fantasy ranger.All mat options come in two versions: normal shaders for Poser 8 and below and SSS shaders for Poser 9 or greater..: Product Features :.* Full Body Inject and Remove* Head Inject and Remove* Skin Default Material* 2 Fantasy Skin Materials* 5 Eye Materials* 6 Lips Color Materials* 7 Natural Makeup Materials* 5 Fantasy Makeup Materials* 38 High Quality Textures in all* Materials are Provided in Normal and SubSurface Scatter (SSS) options3rd party products needed:Victoria 4.2 BaseVictoria 4.2 Morphs++V4 Elite Body ShapesClothing, hair, and poses not included.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Car Dealership (for Poser): This is a model of a typical car dealership.Product Features:* Poser figure: obj, cr2/ png, with 62,612 polygons.* Moving parts:- Front two doors can open and close, with an ERC dial on the Body.- Rear two doors can open and close, with ERC dials on the Body.- Three doors connecting the main building the garage can open and close, with ERC dials on the Body.- Nine interior doors can open and close, with ERC dials on the Body.* Separate parts, which be hidden or shown to give your dealership a different look:- Front banner-overhang.- Front sign.- Light poles.- Side porch.- Garage is a separate building, with its own ceiling and walls.Textures:* One set of textures is included.* The Grass material uses Poser's noise shader to simulate the look of grass.* The Light materials use IDL to help illuminate the scene.* The Wall materials use the fBm shader node for extra detailing.Poses:* Twenty-four hide/ show poses to hide the walls, ceiling, light poles, main sign, and more.Cameras:* Fourteen camera files are included.* The camera files also hide any walls which may be blocking the camera.All images rendered in Poser Pro 2012 using the included camera filesFor use in Poser 6 and above; has not been tested in DAZ Studio.Cars available for sale separately.
Fiorella (V4) (for Poser): Fiorella - character for Victoria 4.2 morphs++. She can be fairy with her elf ears, she can be sorceress, exotic beauty from fantasy realms and everything you want her to be. Her colorful makeup options and eyes colors make her perfect for fairy realms..: Product Features :.* Fullbody INJ/REM poses* Head INJ/REM poses* Skin default MAT pose* Skin with tattoo MAT pose* 6 eye MAT poses* 6 head makeup MAT poses* 6 lip MAT posesPromo renders in Poser 8 with Firefly engine.3rd party products needed:Victoria 4.2 BaseVictoria 4.2 Morphs++V4 Elite Body ShapesClothing, hair, and poses not included.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Assault Trooper (M4) (for Poser): Another set of armor for your sci-fi marines.Perfect for sci-fi, futuristic, or military scenes. Is your character invading a planet or saving the galaxy from aliens? The choice is up to you!Product Features:* Includes the following conforming Poser figures: (obj, cr2/ png):Boots, at 1,356 polygons.Leg Armour, at 774 polygons.Shoulder Armour, at 532 polygons.Torso Armor, at 1,658 polygons.Wrist Armor, at 492 polygons.Helmet, at 626 polygons.- The visor is a separate material that can be set to varying levels of transparency.Each armor piece is a separate figure, which makes it easy to add or remove pieces that you need..: Morphs :.* Includes the following morphs to fit your M4 character:BeerBellyBellySmoothBellyThicknessBellyThinBodyBuilderBulkChestBuiltChestDiameterChestDroopChestFlattenChestLargeChestMassiveChestSizeChestSmallChestSternumDefinitionEmaciatedGluteSizeHeavyInhaleSmoothSuperHeroThighsThicknessThighsToneThinTorsoThicknessTummyOutWaistWidthYoungRequires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ.Material Collection Files:* Three levels of transparency for the visor:- 100% opaque- 50% transparent- 100% transparent* Includes one "body black" material collection file for M4.Textures:* One set of texture maps, at 2048x2048 pixels with corresponding normal/ bump maps.This product is designed for use in Poser 6 and above.Original model by Arteria3D and uploaded for sale here with full permission.
Death Trooper Armor for M4 for Poser: The Death Trooper Armor from Star Wars: Rogue One for use with M4.Includes 22 parented props:* Full body armor including helmet* Blaster rifle and boots not included.* Also includes a material collection file to turn your M4 character's body parts black.- You could also use a body suit instead of re-coloring your M4 charactersCreated and tested in Poser; has not been tested in DAZ Studio.Model by Richard Duda, clean-up by JHoagland.
Moscowichs Cat (for Poser): A stand-alone cartoony cat..: Product Features :.* Poser figures: obj, cr2/ png, at 21,738 polygons- Cat* Mouth & face morphs:- Mouth Open- Brow- Eye Close- Smile- Ears* Poses:- Pose* Full set of textures.Original model created by Moscowich80. Uploaded for sale here with her full permission.
Castle Set 1 (for Poser): This is a set of 4 buildings for you to create your own fantasy or medieval castle scenes.The smallest building, the Stable, has enough space for 2 or 3 horses.The Main Stable includes hay bales, space for 3 or 4 horses, and an upper story where the stable staff can live.The Kitchen building is a two-story building with an interior.The largest building is the Castle:There are two courtyards with buildings- the first courtyard includes the banquet hall (with interior) and a well. The second courtyard includes the king's room, also with an interior.The drawbridge at the front of the castle is two separate parts, which can be hidden or shown, depending on whether you want visitors or not.A second set of stairs on the right side allows for a rear-door escape if needed.The eight towers provide look-out posts for guards or archers and the numerous walkways allow them to quickly move between the towers.Product Features:* Includes the following Poser figures: (obj, cr2/ png):- Castle, at 39,516 polygons. Includes a drawbridge, buildings inside the walls, banquet hall and king`s chamber interiors, plenty of stairs, walkways, ledges, and more!- Kitchen, at 10,560 polygons. Includes a full interior (with a chair and table) and walls which can be hidden (to see the interior).- Main Stable, at 3,855 polygons. Includes 3 hay bales which can be rotated or repositioned.- Stable, at 767 polygons.* Eighteen camera files are included for use with the castle. Use these to render your scenes or use them as a starting point.Textures:* One set of texture maps, at 2048x2048 pixels, many of which include corresponding normal/ bump maps.This product is designed for use in Poser 6 and above. It has not been tested for use in DAZ Studio.Original model by Arteria3D and uploaded for sale here with full permission.
Delivery Van (for Poser): Product Features:* Poser figure: includes obj, cr2/ png, 107,820 polygons* An ERC dial on the BODY rotates all four wheels.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel.* Left and right rear doors can open and close, with an ERC dial on the BODY.* Hood can open and close, with an ERC dial on the BODY.-A low-polygon engine can be seen when you open the hood.* Right and left front doors can open and close, with an ERC dial on the BODY.* Right side doors can open and close, with an ERC dial on the BODY.* Front seats can move forward and backward to accommodate the various Poser figures.* Front license plate can be hidden or shown, depending on the needs of your scene.* Bonus! Includes dashboard with left-hand steering wheel (US) AND right-hand steering wheel (UK).* Note: since this model was designed to be a cargo van, no rear seats are included.Morphs:* All four wheels include a "Flat Tire" morph to simulate a flat tire.Textures/ MAT Poses:* Texture designs:-Leann's Flowers-Maria's Indonesian Bistro-SuperShuttle transportation service* Five BodyMetal colors:-Black/ Dark Gray-Green-Red-White-Yellow* Five textures/ MAT poses for the license plates:-Florida 1 (Sunshine State design)-Florida 2 (Manatee design)-Illinois-Texas-White metallic (commercial vehicle)Also includes corresponding displacement maps to simulate raised lettering on the plates.-Displacement mapping adds extra realism as the plate-lettering is three-dimensional.The license plate is mapped the same as our other cars and trucks, which means you can use those textures on this model.* Bump map on the tires creates tread detailing.* Texture map and bump map on the underside creates extra detailing.* Accurately reflecting mirrors.* The side windows are a separate material from the front windows.-This allows you to make the side windows opaque so your BodyMetal texture can cover the windows.* Templates for all materials included and materials are color-coded.Hide/ Show Poses:* Hide/ show front license plate* Show steering/ dashboard left (hides steering/ dashboard right)* Show steering/ dashboard right (hides steering/ dashboard left)* Sunroof open/ closedFor use in Poser 5 and above: uses procedural materials such as reflection, displacement, and blinn.This product has NOT been tested for use in DAZ|Studio.
Double Coptor (for Poser): This is a double-bladed dragon-like attack vehicle.The cockpit can hold one pilot.Twin side-mounted guns can lay down suppressing fire or attack an enemy's position.The twin rotors can rotate to provide lift or thrust.Product Features:* Poser figure: obj, cr2/ png, with 27,987 polygons.* Head can raise up and down.* Jaw can open and close, with an ERC dial on the Body.* Left and right wings can rotate, with an ERC dial on the Body.* All three rotors can rotate, with an ERC dial on the Body.* Tail can rotate left-right, with an ERC dial on the Body.* Hatches on all tail sections can open and close.* Scaled to the size of the Poser/ DAZ people... who can sit in the cockpit seat.* One texture map, at 4096x4096.Original model created by Moscowich80. Uploaded for sale here with her full permission.
Detective Holms (for Poser): A detective character to help solves any mysteries you might have...Product Features:* Stand-alone Poser figure (obj, cr2/ png), at 63,228 polygons* Mouth & face morphs:-Inflate-Smile-Speak-Eye close - open-Brow up-Open mouth-Sadness eye* Objects... which are parented to the figure:-Cap-Smoking Tube* Poses:-Dance (animated pose)-Walk (animated pose)* Textures for the body, cap, head, hair, and all clothes.Original model created by Moscowich80. Uploaded for sale here with her full permission.
Robot Spider (for Poser): A low-polygon, game-ready mechanical sci-fi robot spider.Is this character sent by the enemy to scout out your base? Or does he patrol the area, protecting your forces from invaders? It's up to you.Product Features:* Poser figure: obj, cr2/ png, with 12,711 polygons.* Head can rotate, with an ERC dial on the Body.* Head-mounted guns can rotate, with an ERC dial on the Body.* Eyes can rotate and move up and down, with ERC dials on the Body.* All six legs are posable, with 3 sections on each leg.* Includes 1 texture map, at 2048x2048 pixels.Original model created by Moscowich80. Uploaded for sale here with her full permission.
Shanty Town Buildings 2: City Block C (for Poser): This is a city-block worth of buildings which can be used however your imagination desires: it could be a derelict town or a tropical city or town or even a run-down city.This set includes:Set A: High rise and lower buildings in a square street layout.Set B: A set of buildings in a "north-south" street layout.The city block includes buildings which are viewable from all 4 sides. This means you can rotate the model for a different look.All of the Shanty Town 2: City Block A, B, and C models are built at the same scale, which means you can combine, duplicate, and reposition the models to create an even larger city.This model also works great with the Shanty Town 1 models.Product Features:* Set C: Poser figure: obj, cr2/ png, with 4,826 polygons.* The buildings and fences are separate body parts which can be hidden or shown to suit the needs of your scene. (Though they can not be moved or rotated.)* If you look close, you may be able spot opening doors (with an ERC dial on the Body).* Duplicate and rotate the city block to create an even larger city.Textures:* One set of texture maps, ranging from 2048x2048 to 4096x4096 pixels with corresponding normal/ bump maps.* Large texture maps make it perfect for both close-up and medium-range shots.This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio.This model is fully licensed for use in games and apps.Also works great as background scene-filler.Original model by Arteria3D and uploaded for sale here with full permission.
Sally`s Kitchen (for Poser): Based upon an assortment of real world kitchens, this model is ideal for when you need a highly detailed and accurate everyday setting for your characters dramas and adventure. It contains all the white goods you'd expect to find in the typical home, such as a Washing Machine, Cooker, Tumble Dryer, Microwave and Fridge. All with working doors and parts such as a rotating Tumble Dryer Drum, Microwave Plate and removable Fridge Salad Tray. All the Doors and Drawers on the Cupboards can be Opened or Closed, which allow you to see a wide variety of foods, and stuff like cleaning products within the Cupboards.This attention to detail also extends to such things as show/hide poses for the walls, water in the outside drains and a Working Clock. Even the Bin Lid, Faucet (taps) and CatFlap work! Oh and don't forget the best parties are always in the kitchen! :)Product Features:* Poser figure: cr2/ png, at 99,659 polygons.Tons of moving parts- too many to list here!Hide/ show poses for the walls, refrigerator, and dryer.Recommended for use in Poser 5 and above; has not been tested in DAZ Studio.
Brownstone Street Scene 1 (for Poser): Product Features:* Two Poser figures: obj, cr2/ png.* Buildings (with sidewalk): 303,313 polygons-This figure includes three highly detailed buildings.-Seven (7) small trees and two (2) bushes are in front of the right building.-Each tree and bush are separate parts which can be hidden or shown to suit the needs of your scene.-Front sidewalk area with small fenced areas, which are perfect for the included tree models, and two parking metersNote: This building set is designed for use a facade, so the doors and windows do not open and there are no interiors behind the windows.* Trees: 60,378 polygons-This figure includes four tree models, each of which can be hidden or shown to suit the needs of your scene.-Each tree has its own Bark and Leaves surface material for more customization.-Use the included material presets to change the leaves.Material Presets (mt5):* Material files are included for all surface materials, allowing you to mix & match material settings.* Unlike MAT poses, material presets can be applied to any material, not just the surface material specified in the file.* List of included material presets:-Tree Bark: texture and bump maps-Black Metal: color and reflection map-Brick1: texture and bump maps-Brick2: texture and bump maps-Concrete1: texture and bump maps-Concrete2: texture and bump maps-Concrete3: texture and bump maps-Concrete4: texture and bump maps-Leaves Style 1: texture, bump, and transparency maps-Leaves Style 2: texture, bump, and transparency maps-Leaves Style 3: texture, bump, and transparency maps-Leaves "off": transparency map to hide the leaves-Window Frames: texture and bump mapsCamera Presets (cm2):* Ten (10) camera preset files are included.* Use these presets to render your scene or use them as a starting point.* All of the sales images were rendered from the camera presets included in this file.Textures:* All surface materials use texture and bump maps.* The tree leaves use "leaf" transparency maps for extra detailing.* No shader nodes were used on this model except for Reflection on the BlackMetal material.* Texture templates are not included; the materials use "maximized" mapping and will take any image file.
Aircraft 146 (for Poser): This aircraft model is inspired by the design of the BAE 146, a four-engine, civilian passenger aircraft.Product Features:* Poser figure: obj, cr2/ png* Rudder can rotate left to right (with an ERC dial on the BODY).* Left and right ailerons (rear tail-wing flaps) can rotate up and down.* Left and right wing flaps on the main wings can rotate up and down.-An ERC dial on the BODY raises or lowers both flaps.-A second ERC dial on the BODY raises or lowers the flaps opposite each other for banking turns.* The landing gear wheels can open and close.* The landing gear doors can open and close.-An ERC dial on the BODY opens and closes both the landing gear wheels and the landing gear doors.* The left and right, front and rear passenger doors can open and close.-A basic interior hallway is included which can be seen when the doors are open, but there is no cabin/ cockpit or other interior.Textures/ MAT Poses:* Includes five texture sets, at 2048x2048 pixels-MarJoh Airlines: red and black-Royal Crown Airlines: purple and gold, with a white stripe-Red Sun: white with blue stripes-Shamrock Air: green top with white bottom and a shamrock on the tail-Unifed Airways: green and dark blue, with a red stripe* Templates are included for all materials; some templates are color-coded according to material.* Be sure to keep an eye out for additional free add-on textures for this aircraft!Note: This model was designed for Poser and the Firefly Renderer: the metal surfaces use ray-traced reflections.
Navy Starter Cart (for Poser): A standard feature on US Navy Aircraft Carriers, the MD1 Aircraft Starter Cart is used to provide compressed air for jet engine start-up for fighter aircraft. Similar Start Carts are also used by the civilian air industry. The MD1 served from 1965 through to the 1990's with the US Military and was retired from service when the aircraft it was used on were all retired from active duty. Features: The cart is fully detailed with spinning wheels, a smart-parented hose prop coiled on the top, and a pose-able smart-parented Hose prop to use with aircraft. It conforms to the free Aircraft Tug, or can be used on its own for your Aircraft Carrier or Air Field scenes. Moving parts include wheels, smart-parented coiled hose prop, and smart-parented pose-able hose prop. Includes 2 hose props. 1 is a smart-parented prop to simulate the hose coiled on top of the cart, the other is a smart-parented hose prop that is fully pose-able and will attach to the side of the cart. Select the cart in your scene before loading either of these props so that they can smart-parent properly. ERC dials for ease of use! Original model by Chris Schell and uploaded here with permission.
Hornet Bridge (for Poser): A more compact starship bridge set, this layout only needs 4 crew members: the helm, 1 chair on the left, and 2 chairs on the right.The stations can be reconfigured for ops, science, tactical, or whatever your mission requires. Dual viewscreens at the front of the bridge can display multiple readouts. Also includes a waiting room/ staging area behind the bridge. You can have you guests relax or have your soldiers prep for landing.The doors in the waiting room can open and close, but there are no hallways behind the doors. Add your own hallway or even an airlock.A ramp on the right side of the waiting room leads to another set of doors. Product Features:* Poser figure file (obj, cr2/ png), with 92,846 polygons.* All of the chairs are separate parts which can be rotated or repositioned in the scene.* The captain's chair can rotate.* All of the walls can be hidden or shown to suit the needs of your scene.* The left and right rear doors can open and close with Pose Controls dials on the Body.* The lift interior can be seen when the lift doors are opened.* The couch in the waiting room can be hidden or shown. Textures:* Multiple "Light" materials for more customization.* The door labels are mapped the same as the Futuristic Hallways, Stellar Cartography, and Junior Officers Room, so you can use the same textures will all these models. Hide/ Show Presets:* Hide/ show each wall and the ceiling. Cameras:* Seventeen camera files are included.* The camera files also hide any walls which may be blocking the camera.- You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by Richard Duda and sold here with permission.
Sick Bay 2 (for Poser): When your crew members need medical attention, send them to the sick bay. This set has 4 beds for examining and recovering patients: 3 along the wall and 1 in the middle of the room. (Beds can be added or removed, depending on your ship`s medical needs.)In the corners, you'll find carts and medical stands to better diagnose the patients. The doctor's office, located around the corner, allows the doctor to meet with patients or crew members as needed. An exterior hallway beyond the sick bay connects everything to the rest of the starship Product Features:* Includes the following Poser figures (obj, cr2/ png):- Sick Bay 2 room, at 175,055 polygons.- Medical Bed, at 2,757 polygons.- Medical Bed 2, at 11,045 polygons.- Medical Cart, at 18,183 polygons.- Office Chair, at 14,979 polygons.- Visitor Chair, at 1,320 polygons.- Medical Stand, at 16,916 polygons. Textures:* One set of textures is included.* Templates are included.* This model uses the Poser fBm shader node for detailing on the walls.Note: this product has not bee tested in programs other than Poser. Poses:* Cart:- Hide/ show the monitor.* Medical Stand:- Hide/ show the upper panel.* Room:- Hide/ show each wall and the ceiling.- Hiding and showing the front hallway wall hides and shows the front hallway doors, hiding the rear hallway wall hides and shows the rear hallway doors. Cameras:* Eleven camera files are included.* The camera files also hide any walls which may be blocking the camera.* All of the sales images were created using the included camera files. All images rendered in Poser Pro 2012 with Indirect Lighting (IDL).
Space Centre (for Poser): This is a typical meeting and conference area found on most space stations in the civilized galactic systems. Includes plenty of walls, rooms, tables, chairs, and other features for any sci-fi scene. Product Features:* One Poser figure (obj, cr2/ png), at 97,818 polygons.* Includes 141 separate parts, which can be repositioned or hidden from the scene.* All parts inside rooms (such as the tables and chairs) are parented to the room so they'll move with the room.* Feel free to add your own parts and pieces to further customize your scene. Textures:* One set of textures and bump maps at 1024x1024 pixels. Hide/ Show Poses:* A total of 32 hide/ show poses, including:- Ceiling- Ceiling and overhead lights- Outer walls- All rooms and walls, which also hide and show the corresponding doors. Position Poses:* Fourteen position poses are included to place your figure within range of the camera.* These poses affect the xTrans and zTrans of the figure's BODY, which means they'll work with all human figures and almost all non-human figures. Cameras:* Twenty camera files are included.* The cameras were carefully designed to not be inside a wall, which means no "hide wall" poses are needed.(Though the hide poses are included since one camera angle is blocked by the Rear Wall.)* Use these to render your scenes or use them as a starting point... rotate the camera and see what else can be seen! All sales images were rendered with the included camera files.The figure shown in the images is not included, but is used to show where the position poses will place the figure. For use in Poser 5 and above; not tested in DAZ Studio. Secondary Note:This set has the same wall layout as the "Catacombs of Death" (available for sale here).- The *cameras* and *figure poses* in the "Catacombs" product will work with this set.- The *hide/ show* poses in the "Catacombs" will NOT work since these products have different walls and doors.And vice versa: the cameras and figure poses in this set will work with the "Catacombs" product.
Shanty Town Buildings 1: Set 4 (for Poser): This town has seen better days. What happened here? Did a storm come through the area and destroy all the buildings? Where the people forced to evacuate?Or was this town created by people who couldn't live anywhere else? Are these ramshackle buildings their permanent home or do they hope for something more. Combine the accessories and buildings to make your own shanty town:* Add fencing sections around a building.* Add metal panels to the walls.* Add and rotate the buildings.* Some buildings have separate parts which can be repositioned or hidden/ shown for more versatility.* Does not include a terrain or ground. We recommend using your own shader or texture on Poser`s Ground Plane. Product Features, Set 4:* Includes the following Poser figures: (obj, cr2/ png): - Shanty Building 13, at 2,269 polygons. Includes the ceiling, an opening door (with an ERC dial on the Body), and all 4 exterior walls as separate parts.- Shanty Building 14, at 880 polygons. Includes a ceiling and all 4 walls as separate parts.- Shanty Building 15, at 769 polygons. Includes a ceiling and all 4 walls as separate parts.- Shanty Building 16, at 3,152 polygons. Includes a ceiling, rubble pile, and front, rear, and left walls as separate parts. Hide/ Show Poses:* A set of hide/ show poses for the ceiling and walls for the buildings is included.- The buildings were designed so that the hide/ show poses will work on every model, provided the building has walls or a ceiling. Textures:* One set of texture maps with corresponding normal/ bump maps, at 2048x2048 pixels. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio; although DAZ Studio may import the files, we do not use DAZ Studio and can't support any issues that may occur. Original model by Arteria3D and uploaded for sale here with full permission.
Shanty Town Buildings 1: Set 5 (for Poser): This town has seen better days. What happened here? Did a storm come through the area and destroy all the buildings? Where the people forced to evacuate?Or was this town created by people who couldn't live anywhere else? Are these ramshackle buildings their permanent home or do they hope for something more. Combine the accessories and buildings to make your own shanty town:* Add fencing sections around a building.* Add metal panels to the walls.* Add and rotate the buildings.* Some buildings have separate parts which can be repositioned or hidden/ shown for more versatility.* Does not include a terrain or ground. We recommend using your own shader or texture on Poser`s Ground Plane. Product Features, Set 5:* Includes the following Poser figures: (obj, cr2/ png): - Shanty Building 17, at 809 polygons. Includes 2 wall "sheets" as separate parts.- Shanty Building 18, at 1,525 polygons. Includes 3 "sheets" as separate parts.- Shanty Building 19, at 1,558 polygons; no moving parts. Hide/ Show Poses:* A set of hide/ show poses for the ceiling and walls for the buildings is included.- The buildings were designed so that the hide/ show poses will work on every model, provided the building has walls or a ceiling. Textures:* One set of texture maps with corresponding normal/ bump maps, at 2048x2048 pixels. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio; although DAZ Studio may import the files, we do not use DAZ Studio and can't support any issues that may occur. Original model by Arteria3D and uploaded for sale here with full permission.
SupaLifter (for Poser): Commonly used in farms and building sites, a Telescopic Forklift Truck (also called a telescopic handler or telehandler) is a vehicle akin to a forklift with the added bonus of a crane like boom. Inspired by real world vehicles, with a hint of near feature design, this model will suit your modern everyday and sci-fi scenes. Along with a texture set typical of those seen on construction sites this model has a highly detailed drivers cab and many working features including: Working Forks & ArmsExtendable Boom Raising/Lowing Main Arm Opening Door (opens to rear for driver safety) Plus a unique pseudo-suspension system which allows you to simulate steering or the position of the wheels on rough ground, yet the wheels can still rotate. Templates are also included if you wish to make your own colour schemes. Product Features:* Poser figure: obj, cr2/ png, with approx 107,696 polygons.* The rear boom arm can raise and lower (with an ERC dial on the Body).* The front boom arm can extend and retract (with an ERC dial on the Body).* The front fork arm-support can rotate (with an ERC dial on the Body).* The front forks can rotate (with an ERC dial on the Body).* The cab door can open and close (with an ERC dial on the Body).* All four wheels can rotate (with an ERC dial on the Body).* The front wheels and steering wheel can turn (with an ERC dial on the Body which affects all the parts).* The wheel struts are posable for driving over any terrain.* One texture scheme.
Shanty Town Buildings 2: Town Blocks (for Poser): An L-shaped section of street buildings. What kind of town is this? Are there people here or has the town been abandoned? You decide!Each building is a separate part and some have opening doors.The overhead poles can be hidden or repositioned. Also includes a second model, rotated 180 degrees, to form a street with buildings on all sides. Product Features:* One Poser figure (obj, cr2/ png), at 10,676 polygons.* Includes the following parts which can be hidden, shown, or repositioned.- 22 buildings.- 2 opening and closing doors, with ERC dials on the Body.- 1 stool.- 2 sets of electrical poles/ overhead wires.- 3 benches.- 1 umbrella stand. Textures:* One set of texture maps, at 4096x4096 pixels with corresponding normal/ bump maps. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio. This model is fully licensed for use in games and apps.Also works great as background scene-filler. Original model by Arteria3D and uploaded for sale here with full permission.
Castle in Ruins (for Poser): A ruined castle, long since abandoned, leaving nothing but rocky ruins. Product Features:* Includes the following 17 Poser figures: (obj, cr2/ png) with no moving parts:- Castle Ruins 01, at 1,078 polygons.- Castle Ruins 02, at 1,038 polygons.- Castle Ruins 03, at 275 polygons.- Castle Ruins 04, at 440 polygons.- Castle Ruins 05, at 295 polygons.- Castle Ruins 06, at 398 polygons.- Castle Ruins 07, at 469 polygons.- Castle Ruins 08, at 434 polygons.- Castle Ruins 09, at 79 polygons.- Castle Ruins 11, at 1,623 polygons.- Castle Ruins 12, at 1,296 polygons.- Castle Ruins 13, at 750 polygons.- Castle Ruins 14, at 672 polygons.- Castle Ruins 15, at 471 polygons.- Castle Ruins 16, at 562 polygons.- Castle Ruins Entrance, at 4,823 polygons.- Castle Ruins Castle, at 16,917 polygons. All of the sections are separate parts that can be rotated, repositioned, or hidden/ shown. Textures:* One set of texture maps, ranging from 1024x1024 to 4096x4096 pixels with corresponding normal/ bump maps. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Navy Lighting Unit (for Poser): The NF-2 Lighting Unit is used by the US Military, both on land and at sea, to provide lighting for maintenance and night-time aircraft operations. It is also used on Commercial Air Fields for this same purpose. Features: The cart is fully detailed with spinning wheels, lights that swivel, and an opening panel to grant access to the controls for the unit. It conforms to the free Aircraft Towing Tractor, or can be used on its own for your Aircraft Carrier or Air Field scenes. Moving parts include wheels, access panel, and lights. ERC dials for ease of use! Original model by Chris Schell and uploaded here with permission.
Navy Weapons Loader (for Poser): The MJ1-B Weapons Loader is used by all branches of the US Military (and in other NATO nations). Its purpose is to lift and position missiles and bombs for attachment to aircraft, and to remove weapons for return to storage. It has a 25hp engine and can lift up to 3000 pounds of weapons and equipment. The MJ1 has been in service since the 1950's and continues in use today! Features: The loader has a fully detailed drivers position, undercarriage, and lifting boom. The wheels can spin and be turned with the steering wheel (via ERC dials), the weapons bracket mounting can swivel, and the boom can be raised and lowered. Moving parts include wheels, steering wheel, lifting boom, weapons bracket mount, control sticks for the boom, gas pedal, brake pedal and clutch pedal. ERC dials for ease of use including basic movements such as driving and steering! Comes with a smart-parented Driver Dummy (unrigged and not pose-able) that can be placed in the vehicle for use in scenes where a fully clothed figure wouldn't be necessary. This dummy figure will automatically parent in place when loaded. Original model by Chris Schell and uploaded here with permission.
Dire Wolf MLMBT (for Poser): You ride in 250 tonnes of moving steel, wrapped in Cera-Luminum Laminate Composite Armour and carrying the most lethal array of weapons ever mounted on a Mag-Lev Chassis. You are part of a 4 man Crew, with 8 men for Infantry Support riding along inside the Hull... You have only one mission, stop what ever gets in front of you! Armed with a dizzying array of weapons (such as a 200mm "Long Reach" Artillery Gun, 100mm Smooth-Bore Cannon, Co-Axial 20mm "Vulcan" Gatling Cannon and 250 Kw "Eagle-Eye" Laser, plus a Mini-Phalanx Anti-Missile System, Dart Multi-Purpose Rockets, and Fire-and-Forget Anti-Tank Missiles), the "Dire-Wolf" MLMBT (Mag-Lev Main Battle Tank) is the ultimate in Modern Armoured Vehicles and the King of Mechanized Warfare. She carries 8 fully equipped Infantry Troopers in specialized compartments along the hull for rapid deployment in Urban Combat or against Infantry on the Battlefield, and can travel at speeds up to 250 KMPh at an altitude of 500 Feet. Fully sealed against chemical, biological and nuclear contaminants, and also for the vacuum of space (for Orbital Landing Drops using a special lower-hull heat shield), the Dire Wolf can deliver its lethal payload any where at any time! Product Features:* Poser figure: obj, cr2/ png, with 46,745 polygons.* Detailed and fully functional weapons systems including a 200mm Hull-mounted Cannon, Turret-mounted 100mm Gun, Co-axial Gatling Cannon and Anti-personel Laser, Phalanx Anti-missile System, Rocket pod, and Anti-tank Missiles!* Detailed interior and internal components, including functional maintenance and crew access hatches, crew controls and cockpit details, and complete with a fully functional muntions storage locker for the main hull-mounted gun!* Troop Compartments with functional external access panels and seating for 8 fully equipped Infantry, plus 3 main crew positions in the forward hull for Crew Commander, Driver, Loader (standing only) and Weapons Operator complete with functional cockpit controls!* Loads with default grungy "working" textures, and includes a set of alternate "clean" textures to show a newly produced vehicle instead of a combat duty version!* Crew Poses for the 3 main crew positions, plus poses for the Infantry troop compartments for use with Vicky 4 and Mike 4!* Numerous ERC dials to control vehicle movement, weapons and access hatches all from one easy to use location. The ERC controls for vehicle and weapons function are tied to the cockpit controls in the crew compartment for realistic function of all operational parts! Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
USS Arizona Add-On Set: Includes Smart-parented Flag, Tropical Covers, and Low-poly Dummy Deck Crew (Smart-parented and non-pose-able) props for use with my USS Arizona Model. These items are Smart-parented the the Arizona and will automatically load, parented in place, on the figure! Requires the previous purchase and installation of the USS Arizona for Poser.
Transporter Room (for Poser): Introducing the next starship room for Poser: a transporter room. How does your crew get from the ship to the surface of a planet without the time-consuming steps of prepping a shuttle? Now they can go from your ship to anywhere in a matter of seconds.Please follow all directions when using the transporter. Manufacturer is not responsible for trips through time, re-arrangement of DNA, trips to a mirror universe, or any other non-recommended usage. Product Features:* Includes one Poser figure (obj, cr2/ png), at 46,054 polygons.Includes both the transporter room and surrounding hallway. Moving Parts:* Like our other sets, all walls (and the ceiling) can be hidden for easier camera placement.* The two doors between the room and hallway can open and close (with an ERC dial on the BODY).* The control console can be hidden or shown to suit the needs of your scene (with a hide/ show pose). Textures:* One set of textures is included.* This model uses Poser`s shader nodes for some materials.* All of the monitor screens use their own texture map, which makes it easy to change the screens and customize the room to suit the needs of your scene.* Templates are included. Poses:* Hide/ show each wall and the ceiling. Cameras:* Eleven camera files are included.* The camera files also hide any walls which may be blocking the camera.* All of the sales images were created using the included camera files. Recommended for use in Poser 5 and above.
E.M.T. Bus (for Poser): EMT Metropolitan Bus, from the Empresa Municipal de Transportes de Valencia, is a municipal bus operated in the Spanish city of Valencia. Product Features:* All four tires can rotate around.* Front tires are steerable.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel.* Front door can open (with an ERC dial on the BODY).* Accurately opening rear doors, which fold together (with an ERC dial on the BODY).* Top two hatches can open. Textures:* Two textures sets and MAT poses are included:-Red-Blue* The license plate material is mapped the same as our cars and you can use textures from those products on this model.* Accurately reflecting mirrors.* Templates for some materials are included. If you want to use your own textures, use the existing textures as a guideline. Original model by Digimation and sold here with permission.
USS Trigger Add-On: Includes a set of Smart-parented Anchor Chains (to replace the Anchors on the Submarine for "In Port" scenes. To use these extra props you will need to make the Anchors), Flag, and Smart-parented Low-poly Dummy Deck Crew (smart-parented and non-pose-able) for use with my USS Trigger figure.
Dodge Viper (for Poser): The Viper was conceived as a futuristic take on the classic American muscle car. While there are some who insist that the iconic AC Cobra was a source of inspiration, the final version of the Viper was far too large and heavy to seriously claim any direct lineage with the compact and lightweight vehicle. Most saw claims to kinship with the Cobra as a marketing exercise, although Carroll Shelby was involved in the initial design of the Viper.The car appeared as a concept at the North American International Auto Show in 1989. This concept vehicle was originally named Copperhead because of its low, wide appearance characteristic of reptiles. The name would later be changed to ViperProduct Features:* Model built entirely with 3-sided polygons.* Opening and closing right and left doors.* Opening and closing trunk. (Spare tire is not removable.)* All four tires can rotate around. (Tires are not removable.)* Front tires are steerable.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel.Textures:* Five MAT poses to change the color:-Black with white stripes-Dark Blue with white stripes-Solid Black-Solid Dark Blue-Solid RedNote: This model was not originally built with the Poser people`s dimensions in mind. You may to have adjust the scale of the car or your character or hide your character`s body parts in order for the scene to look correct.Original model created by Digimation. Uploaded for sale here with their full permission.
B 52 Stratofortress (for Poser): The Boeing B-52 Stratofortress is a long-range, jet strategic bomber flown by the United States Air Force (USAF) since 1954.The B-52 replaced the Convair B-36 and the Boeing B-47. Although built for the role of Cold War-era nuclear deterrence, its conventional capabilities now take priority. The aircraft has the longest range of any bomber and carries a heavy strategic or tactical weapons load.Its economy in operation and high subsonic performance compared to the rest of the USAF strategic bomber fleet has enabled it to continue to serve rather than be replaced by the Mach 3 XB-70 Valkyrie, supersonic B-1B Lancer, and stealth B-2 Spirit. In January 2005, it was the second aircraft, after the English Electric Canberra, to mark 50 years of continuous service with its original primary customer.Product Features:* Poser figure: obj, cr2/ png, with 89,651 polygons; all of which are 3-point polygons.* Rudder can rotate (with an ERC dial on the Body).* Landing gear can open and close.* Landing gear doors can open and close.- An ERC dial on the Body affects both the landing gear and the landing gear doors.* The left and right rear ailerons can rotate up and down.* The left and right wing flaps can rotate up and down.-An ERC dial on the BODY raises or lowers both flaps.-A second ERC dial on the BODY raises or lowers the flaps opposite each other for banking turns.* All landing gear wheels can rotate (with an ERC dial on the BODY).Textures:* One set of texture maps and corresponding bump maps are included.* Templates are included, but we recommend using the existing textures as a guideline.Rigging by Sixus1Media.For use in Poser 9 and above: uses complex ERC controls and Poser shader nodes.Original model by Digimation and sold here with permission.
DeHavilland Mosquito (for Poser): The Mosquito almost never existed were it not for the efforts of DeHavilland, who petitioned repeatedly to the RAF command to have his aircraft accepted. Built almost in its entirety of plywood, this amazing and very versatile aircraft became one of the most successful of WW2. Powered by Rolls-Royce Merlin engines, she had an amazingly high speed and maneuverability for her time, and owing to her lightweight construction could carry a sizeable bomb load as well. The “Mossie”, or “Timber Terror” was originally produced as a light bomber, but also became a night fighter, ground attack platform, raider, coastal patrol craft, amongst other uses.Included conforming figure add-ons:* 1 set of 12 conforming and fully pose able 250lb bombs is included.* These "bombs" conform to the Mosquito and are individually pose able so that the user can make them fall away and tumble as they drop.*1 conforming prop blur prop to add a sense of motion to the aircraft in flight.All flight control surfaces, rudder, landing gear, and moveable parts can be accessed in the scene tree for the skeleton of the Mosquito. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Toyota Yaris (for Poser): The Toyota Yaris is a subcompact car produced by Toyota since 1999, replacing the Starlet. Between 1999 and 2005, some markets received the same vehicles under the Toyota Echo name. The hatchback version of the Yaris has also been marketed under the name Vitz. This digital model is based on the 2007 version of the Toyota Yaris. Digitally scanned from the actual car, which gives the digital model a highly accurate shape. Product Features:* Poser figure (obj, cr2/ png), with approx 63,791 polygons.* All four passenger doors can open and close (with ERC dials).* An ERC dial rotates all four wheels.* Steering wheel is turnable and an ERC dial affects both the front wheels and steering wheel.* The trunk can open and close (with an ERC dial).* Includes a detailed trunk interior.* The hood can open and a detailed engine can be seen underneath.* The front seats can move forward and back to accommodate the various Poser figures.* The stick shift is a separate part which can move left-right or front-back.* The spoiler is a separate part which can be hidden or shown, depending on the needs of your scene. Textures:* Body metal:- Black- Blue- Green- Orange- Purple- Red- Silver- Yellow* License plates:- Florida- Vermont- Michigan- New York- MontanaThe license plate is mapped the same as our other cars and trucks, which means you can use those textures on this model.* Bump map on the tires create tread detailing. Original model by Digimation, uploaded for sale here with permission.
Store Building Rear (for Poser): This is the rear of an urban building, complete with stairs leading to a second floor.Includes the back wall and road surface.Doors do not move. Product Features:* Poser figure: obj, cr2/ png, with 211,961 polygons.* Does not include any moving parts. Textures:* One texture scheme.* Some materials, such as glass and metal use Poser shaders. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
The Ruins by Chris Schell (for Poser): A set of ruins: 1 building and 1 wrecked mech robot. Includes the follow models in pp2 format with corresponding obj files:- Industrial Ruins- Industrial Ruins Mirrored- Mech Wreck- Mech Wreck Mirrored Original model by Chris Schell and uploaded here with permission.
Cylon Raider 2005 (for Poser): The Cylon Raider from the 2003/ 2005 Battlestar Galactica TV series. Model Features:* Poser figure: obj, cr2/ png, with 46,279 polygons.* No moving parts. Textures:* One color map and one specular map, at 4096x4096 pixels.* One `eye` map at 2048x2048 pixels. Designed for use in Poser 6 and above. Original model by Chris Kuhn and converted with permission.
HMS Hood Add-On Set: Includes Smart-parented Tropical Covers, Low-poly Dummy Deck Crew (Smart-parented and non-pose-able), and Flag for use with my HMS Hood figure. These items will load parented in place on the ship. Requires the previous purchase and installation of the HMS Hood for Poser.
USS Arizona (for Poser): On December 7th, 1941 the Japanese Navy launched a surprise attack on the U.S. Navy and Army installations at Pearl Harbor in Hawaii. The U.S.S. Arizona was a victim of the first wave of attacks when bombs detonated her forward powder magazines, blowing off her bow and sending her to the bottom... but that is only the end of a long story and a proud ship. The USS Arizona model includes over 70 moving parts, such as: guns, cranes, turrets, spotlights, and propellers. Product Features:* Main USS Arizona figure* 3 smart-propped versions of the Anchors * 2 smart-propped O3U Corsair floatplanes Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Sephora Bridge (for Poser): This bridge design was first used by starships in the last 2340`s.Three sit-down consoles behind the captain displayed readouts for the engineering, communication, and science departments.Unlike later bridge designs, the elevator lift is located at the front of the bridge, rather than in the rear. A second set of doors at the front of the bridge leads to a hallway. The consoles use physical buttons rather than flat-panels surfaces. While this made issuing commands a little easier, the consoles could not be easily reconfigured for different missions. Product Features:* Poser figure: obj, cr2/ png, with 488,748 polygons.* The model is made entirely of 3-point polygons (triangles).* The helm, ops, and rear chairs are separate parts which can be rotated or repositioned in the scene.* The captain's chair can rotate with a Pose Control dial on the Body.* The ceiling and all of the walls can be hidden or shown to suit the needs of your scene.* All of the doors can open and close with Pose Controls dials on the Body.- The left doors open into a small corridor and the right doors open into an elevator lift.- The outer left doors can open and close, but there's no hallway on the other side.* The navigation dial in the center of the helm console can rotate, with a Pose Control on the Body. Textures:* One texture scheme with texture maps. Hide/ Show Presets:* Hide/ show each wall and the ceiling.- Hiding and showing the each wall hides and shows the corresponding doors. Cameras:* Thirteen camera files are included.* The camera files also hide any walls which may be blocking the camera.- You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. All sales images rendered in Poser Pro using a combination of lights and Indirect Lighting (IDL). Designed for use in Poser 6 and above and not supported in any other software. Original model by Ashley Tinger and uploaded for sale here with permission.
Astrometrics Lab (for Poser): Analyze the galaxy in this astrometrics lab.The main display can be configured to show the immediate region of space or further into the galaxy- the only limit is what's in your computer banks!Stations in front of the main display can also be configured for the same display or for additional information.Wall stations (with chairs) allow crew members to run simulations or monitor other ship systems. Product Features:* Poser figure file (obj, cr2/ png), with 50,863 polygons.* All six of the chairs are separate parts which can be rotated or repositioned in the scene.* All of the walls can be hidden or shown to suit the needs of your scene.* The front doors can open and close with a Pose Control dial on the Body.- Although the doors can open, there are no corridors behind the doors. We recommend using one of the many corridor sets, for sale here, for background hallways. Textures:* Multiple "Ceiling Light" materials for more customization.* One texture scheme. Hide/ Show Presets:* Hide/ show each wall and the ceiling.- Hiding and showing the front wall hides and shows the doors. Cameras:* Nine camera files are included.* The camera files also hide any walls which may be blocking the camera.- You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by Richard Duda and sold here with permission.
Lancet MLIFV (for Poser): You ride in 120 tonnes of moving steel, wrapped in Cera-Luminum Laminate Composite Armour and carrying the best array of defensive weapons they could mount on a Meg-Lev APC chassis. You are part of a 4-man Crew and carry 16 Infantry Troopers for Battlefield Infantry Support. Your job… Get the troops onto the battlefield and scout ahead of the main forces! Product Features:* Poser figure: obj, cr2/ png, with 36,722 polygons.* Detailed and fully functional weapons systems including a Phalanx Anti-missile System and Rocket Pod!* Detailed interior and internal components, including functional maintenance and crew access hatches, crew controls and cockpit details, and troop compartment!* Internal Troop Compartment with functional external access ramp and seating for 16 fully equipped Infantry, plus 4 main crew positions in the forward hull for Crew Commander, Driver, Infantry Jump Master and Weapons Operator complete with functional cockpit controls!* Loads with default grungy "working" textures, and includes a set of alternate "clean" textures to show a newly produced vehicle instead of a combat duty version!* Crew Poses for the 4 main crew positions, plus poses for the Infantry troop compartments for use with Vicky 4 and Mike 4!* Numerous ERC dials to control vehicle movement, weapons and access hatches all from one easy to use location. The ERC controls for vehicle and weapons function are tied to the cockpit controls in the crew compartment for realistic function of all operational parts! Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Shuttle Model XV (for Poser): This is a small, one-person shuttle designed for short-term transport. Though in an emergency, a few people can fit behind the control chair. Product Features:* Includes one Poser figure (obj, cr2/ png), at 30,976 polygons.* Left and right doors can open (with an ERC dial on the Body).* Chair does not move.* One set of textures is included.
SpiderMex (for Poser): Inspired by Mother Nature and many scientists, engineers and designers, the SpiderMex - pronounced Spider Mechz - is a sci-fi styled hexapod vehicle capable of carrying a single passenger. As with all high quality products designed by the Molek Corporation, the Poser version has all the features you'd find on the real thing. Including 6 fully articulated legs, each of which has a full range of natural movement. Such as: Up/Down, Left/Right, Forward/Rear. It's this range of articulation which provides hexapods with the ability to be stable anywhere and to operate even when one leg is disabled. Product Features:* Fully posable Poser figure: obj, cr2/ png, with approx 115510 polygons.* All six legs are fully posable: rotate, up/ down, and twist.* The canopy can open and close (with an ERC dial on the BODY). Textures/ MAT Poses:* Olive Army Green* Navy Grey* Police "Protect & Inject"
USS Maryland Add-on Set: A set of Smart-parented Canvas Tropical Covers, a Low-poly Deck Crew set, and a Smart-parented Flag for the USS Maryland. These items are designed to load automatically parented in place on the main USS Maryland figure! Requires the purchase and installation of the USS Maryland for Poser.
USS Navajo (for Poser): The Cherokee class, originally known as the Navajo class, was a class of Fleet Tugs built for the United States Navy prior to the start of World War II. They represented a radical departure from previous ocean-going tug designs, and were far more capable of extended open ocean travel than their predecessors. This was due in large part to their 205 feet (62 m) length, 38 feet (12 m) beam, and substantial fuel-carrying capacity. They were also the first large surface vessels in the US Navy to be equipped with diesel/electric drive. USS Navajo (AT-64) was the lead ship of her class. She was named for the Navajo people. Navajo was laid down by the Bethlehem Shipbuilding Corporation, Staten Island, New York, on 12 December 1938; launched on 17 August 1939; sponsored by Miss Olive Rasmussen; and commissioned on 26 January 1940, Lt. Comdr. M. E. Thomas in command. Product Features:Included are the main USS Navajo figure, and 3 smart-propped versions of the Anchors (all anchors up, single anchor lowered, and all anchors lowered). Optionally the Anchors may be left out for replacement by other props (such as the available "easy pose" chains and extra items of that nature available from many sources)... Pose-able features include: working Rudder and Propellers, Main and Secondary Gun Turrets that can rotate with Barrels that can elevate independently, working Deck Crane, and functioning Spot-lights. Original model by Chris Schell and uploaded for sale here with permission. For use in Poser 6 and above.
MiG-21 PFM Fishbed F (for Poser): The MiG-21 was the first successful Soviet aircraft combining fighter and Interceptor characteristics in a single aircraft. It was a lightweight Fighter, achieving Mach 2 with a relatively low-powered After-burning Turbojet, and is thus comparable to the American Lockheed F-104 Starfighter, Northrop F-5 Freedom Fighter, and the French Mirage III. Its basic layout was used for numerous other Soviet designs; delta-winged aircraft included SU-9 Interceptor and the fast E-150 Prototype from the MiG Bureau while the mass-produced successful Front-line Fighter SU-7 and Mikoyan's I-75 Experimental Interceptor combined a similar fuselage shape with swept-back wings. However, the characteristic layout with the shock cone and front air intake did not see widespread use outside the USSR and finally proved to have limited development potential, mainly because of the very small space available for the radar. Here are some of the Highlights:* Over 50 Points of Articulation on the main figure!* Moving Flaps, Ailerons, Spoilers, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seat...* Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation!* Nose Radome opens to reveal the RP-21 Sapfir Radar Set.* Conforming Dummy Aircrew figure to use to place a Pilot in the Cockpit.* Conforming Crew Boarding Ladder and FOD Storage Covers for the Engine and Air Intake.* 9 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the MiG-21 Fishbed, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing a total combination of nearly 100 variations of weapons loads that can be loaded based on mission requirements!No additional files will be needed to use this product... it is a stand-alone figure! Original model by Chris Schell and uploaded for sale here with permission.
Russian Sniper (V4) (for Poser): Come to order, soldier!This is a uniform inspired by Russian and Soviet sniper uniforms. Great for military scenes or as a camo-style outfit. Product Features:* Poser figures: obj, cr2/ png:* Boots, at 13,428 polygons.* Hat, at 2,550 polygons.* Hood Down, at 2,248 polygons; includes the following position morphs:- AwayFromBody* Hood Up, at 5,336 polygons.* Suit, at 51,311 polygons. Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Textures:* One set of textures for each clothing. Morphs:* Each clothing includes these shape morphs to fit your V4 character, where applicable:- Amazon- BodyBuilder- BreastsCleavage- BreastsCleavageWidth- BreastsDiameter- BreastsDroop- BreastsFlatten- BreastsHangForward- BreastsImplant- BreastsLarge- BreastsNatural- BreastsPerk- BreastsSize- Bulk- Emaciated- Fitness- ForearmsThickness (suit only)- Heavy- MaleBody- NeckThickness (suit and hoods only)- PearFigure- Pregnant (suit only)- ShinsThickness (boots and suit only)- ShouldersThickness (suit only)- ThighThickness (suit only)- Thin- TummyOut (suit only)- Voluptuous- Young Requires the previous download and installation of Victoria 4 (V4) and Vicky 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Navy Nitrogen Cart (for Poser): Used by the US Military, the NAN-2 Nitrogen Cart allows maintenance crews to recharge the nitrogen used in various aircraft systems. Similar carts are also used in the civilian aircraft industry for this same purpose. Features: The cart is fully detailed and conforms to the free Aircraft Tug, or can be used on its own for your Aircraft Carrier or Air Field scenes. ERC dials for ease of use! Original model by Chris Schell and uploaded here with permission.
YF-35 Warthog VGF (for Poser): The YF-35 Warthog began life initially as an upgrade package for the VGF-14 Wildcat Variable Geometry Fighter. Ultimately the upgrade proved too heavy for the capacity of the airframe, so Earth Avionics initiated a development program for a new fighter designed around the planned upgrade to the older aircraft. The YF-35 was only designed with 2 modes of operation, Close-Combat Mode for Urban Warfare, and Fighter Mode, for air and space flight, but added an extra crewman for a dedicated Systems Officer along with the Pilot to help handle aircraft systems and sensors. This Aircraft features fully functional flight surfaces and controls (the cockpit controls move when the ERC Dials are used to move the aircraft) and also a full transformation capability from Aircraft Mode to Close-Combat Mode! Product Features:* Poser figure: obj, cr2/ png, with 118,304 polygons.* Includes one Poser figure which can transform into 2 modes: aircraft and mecha.* Over 75 Points of Articulation on the main figure!* Moving Flaps, Ailerons, Rudders, Opening Landing Gear Doors, Raising and Lowering Gear, turning wheels, Opening Canopies, Deployable slats, Deployable Landing Hook, Deployable Catapult Bar, moving Sticks and Throttle, Deployable Emergency Drag Chute, working Intake Seals,Transformation Lever, moving Rudder Pedals, fully independently controllable missiles, and much more...* Separate Conforming Figure Weapons and Ordinance, with fully controllable ordinance deployment (Some sold as separate packs). Includes a set of conforming Missiles, smart-parented Chaff/Flare Pod, and fully functional Collapsible Gun Pod.* Comes in 3 fully rigged variants (J and S-Types, and an Advanced Trainer) that share common geometry but load from independent CR2's for each type.* Includes Smart-Parented Dummy Pilot figures (un-rigged and non-poseable) to place in the Cockpit (loads automatically parented to each Ejection Seat). Also includes a pose-able Crew Boarding Ladder for each Cockpit.* Over 250 Independent ERC controls on the main figure for complete control of most vital functions from 1 location.* Independent ERC controls for each moving part.* Articulated Landing gear with coordinated ERC for 1 dial raise and lower.* ERC Landing Hook and Catapult arm.* ERC weapons controls for launching steer-able missiles and ordinance.* ERC dials for easy transformation to each of the 2 modes!* Pre-Posed Poses for Fighter configuration, Close-Combat Configuration and Mecha Configuration.* Fit-to Poses for the Gunpod for either mode Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
YF-35 Weapons Add-On Set (for Poser): Introducing the weapons add-on for the YF-35 Warthog VGF: Product Features:* Poser Figures:- Mk35 Multi-Missile Pods- Mk82 Laser Guided Bombs- YF-35 Close Support Load- YF-35 Tactical Air Load * Parented Props:- Y-35 Chaff Pod * MAT Poses:- Y-35 Chaff Pod- Mk35 Multi-Missile Pods- Mk82 Laser Guided Bombs- YF-35 Close Support Load- YF-35 Tactical Air Load * New textures for all props. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Viking Town: Set 1 (for Poser): Transport your characters to the time of the Vikings, where marauders roamed the seas and villages were pillaged every day.This set of buildings and props will let you create your own Viking village, wherever your character may set up their base camp. Includes buildings, logs, stones, a longboat, and more. Product Features:* Includes the following Poser figures: (obj, cr2/ png), some of which have separate parts that can be hidden/ shown or repositioned.- Blacksmith, at 2043 polygons. Parts: awning (which can be hidden or shown) and 1 table, and no interior.- Building 01, at 6726 polygons. Parts: 1 bed, 3 seats, 1 stool, and 1 table. An interior can be seen through the open doorway.- Building 02, at 9083 polygons. Parts: 15 beds, 11 seats, 6 stools, and 6 tables. An interior can be seen through the open doorway.- Building 03, at 5239 polygons. Parts: fire pit. An interior can be seen through the open doorway.- Building 10, at 1315 polygons. No moving parts.- Anvil, at 546 polygons. Parts: anvil, base, and hammer.- Blacksmith fire, at 38 polygons. No moving parts.- Log pile, at 990 polygons. Parts: 12 logs. Textures:* One set of texture maps with corresponding normal/ bump maps, at 1024x1024 and 2048x2048 pixels. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Shanty Town Buildings 2: Set 6 (for Poser): The sixth set of buildings to build your own town and village. Includes 4 models which also work nicely with the other Shanty 2 Building Sets and the Shanty 2 Town Blocks. Some buildings have moving parts, such as doors and shelves which can be opened and closed, some buildings have stools which can be repositioned, and some buildings have a ceiling and walls which can be hidden or shown.Does not include a terrain or ground. Product Features:* Includes the following Poser figures: (obj. cr2/ png):- Building W, at 376 polygons; no moving parts and no interior.- Building X, at 777 polygons. Includes opening cabinet doors (with a pose dial on the Body), front gate and stools, opening shelf doors (with a pose dial on the Body), ceiling and 4 walls- Building Y, at 135 polygons; no moving parts and no interior.- Building Z, at 355 polygons. Includes a shelf door (with a pose dial on the Body), 2 stools, ceiling and 4 walls. Textures:* One set of texture maps, at 4096x4096 pixels with corresponding normal/ bump maps, for each building. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Blue Queen (V4) (for Poser): An outfit for a queen, princess, wizard, or anything your imagination can come up with.Includes all of the clothing models and color schemes shown in the images. Product Features:* Poser figures: obj, cr2/ png:- Boots, at 12,260 polygons.- Crown, at 1,302 polygons.- Dress, at 17,097 polygons.- Neckband, at 1,692 polygons.- Outer Dress (with belt), at 3,058 polygons.- Wristlets, at 10,366 polygons. Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Also includes a "HighHeelShoes" pose for V4's feet so they'll fit in the high-heel boots. Textures/ Material Files:* Includes material files which will affect any of the clothing models:* Color schemes for both the cloth and trim:- Blue with gold trim- Green with red trim- Red with white trim * Also includes separate material files for only the cloth and trim:* Cloth:- Blue- Green- White* Trim:- Gold- Red- White * All clothing files include the usual morphs to fit your V4 character. Requires the previous download and installation of Victoria 4 (V4) from DAZ. For use in Poser 6 and above Original design commissioned from cathrine6mirror.Clothing models created by and commissioned from Moscowich80.
Middle Ages Buildings Set 1 (for Poser): Straight from the middle-ages comes another set of medieval-themed models.Build fantasy scenes or historic towns with these buildings, accessories, and castle. Also includes a gallows for punishing any criminals or to warn people about the punishment.The castle is meant as a defensive positions and can fit a small farm, but not a building or an entire town. And these work great with our other medieval buildings. Product Features:* Set 1 includes the following Poser figures: (obj, cr2/ png):- Blacksmith, with 6,264 polygons; includes a door that can open and close, separate parts for the barrels, anvil, and hammers, and interior that can be seen through the door.- Building 2, with 4,171 polygons; includes separate parts for the shelves and two tables, and interior that can be seen through the doorway.- Building 3, with 3,830 polygons; includes separate parts for the shelves and two tables, and interior that can be seen through the doorway.- Cart 1, with 1,332 polygons; includes wheels that can rotate and the handles are separate parts which can be hidden or shown.- Small Castle, with 9,623 polygons; no moving parts, but plenty of areas to position your characters: on the top walls, on the stairs, and so on.- Gallows, with 598 polygons; rope and noose are separate parts and the rope can extend in length. Textures:* One set of texture maps, at 2048x2048 pixels with corresponding normal/ bump maps. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Modern Bank (for Poser): This model includes an interior and exterior for all your banking needs.On the inside, you'll find three teller windows to help with deposits, withdrawals, or what-have-you. A queue line stand keeps customers away from the tellers until its their turn.Two chairs allow for people to sit down while their friends go about their business.A side door allows access to the rear of the bank... but only authorized personnel are allow back there.And when it's time to close, the security blinds can be closed over the teller windows. The exterior includes brick surfacing, a glass front, and an ATM on the side wall. Product Features:* Poser figure (obj, cr2/ png) with 12,076 polygons* Right and left exterior doors can rotate open and close, with an ERC dial on the Body.* Interior door can rotate open and close, with an ERC dial on the Body.* Three security blinds can open and close, with ERC dials on the Body for each one.* Two chairs, which can be repositioned in the scene or hidden/ shown.* One table: can be repositioned in the scene or hidden/ shown* Queue Line Stand: can be repositioned in the scene or hidden/ shown* As usual for our sets, all of the walls are separate body parts which can be hidden or shown. (Hide/ show poses included.)* Includes fully detailed interior and exterior. In fact, the exterior includes at ATM on the side wall! Textures:* One texture set, made by mrsparky.* Templates are included.* Uses Poser's reflection node for the metal surfaces.* Feel free to experiment with your own metallic or glass materials. Interior images rendered with InDirect Light (IDL) in Poser Pro 2012. Original model created by Digimation. Uploaded for sale here with her full permission.
Wilbur Engineering (for Poser): The engineering room to match the Wilbur Bridge.At the rear of the room is the reactor core which powers the ship. Access to the core can be reached via the steps and upper walkway.Two consoles in front of the core allow crewmembers to regulate and monitor the power and energy supply. In the middle of the room are fuel tanks on the left and right walls. What`s inside? Sorry, that`s a proprietary secret known only to the space fleet engineers.And the table in the center of the room can control whatever fuel source is in the tanks. Product Features:* Poser figure: obj, cr2/ png, with 98,998 polygons.* Three vents on the front wall can open and close, with an ERC dial on the Body.* All 14 left and 14 right doors can open and close, with ERC dials on the Body.* The railings are separate parts which can be hidden or shown to suit the needs of your scene.* Left and right stands and the table are separate parts which can be repositioned or hidden or shown.* Some doors open into hallways and some don`t. Use the Overhead camera preset to see which doors lead to hallways.* No chairs are included since there are no sit-down stations, but feel free to add your own. Cameras:* Eleven camera files are included.* The camera files also hide any walls which may be blocking the camera.- You can use these camera files to render the scene or use them as starting points. All sales images rendered in Poser Pro using a combination of lights and Indirect Lighting (IDL). Designed for use in Poser 6 and above and not supported in any other software.
Shtirlec (for Poser): A new cartoon-style German soldier for your scenes. This is a low-poly figure, at 26,814 polygons, which makes it ideal for crowd scenes. Product Features:* Stand-alone Poser figure (obj, cr2/ png), at 26,814 polygons* All body parts are fully poseable.* Includes cap.* Mouth and Face morphs:-Brow Up-Eyes Close-Eye Shrewd-Mouth Open2-Mouth Speaking-Nose-Evil-Boo-Hmm-Sad Textures:* One set of textures for the body (uniform), head, and cap.* Normal bump map and specular map for the head. Original model by Moscowich80, uploaded for sale here with permission.
Vesna (V4) (for Poser): Meet Vesna - character for Victoria 4.2. Her shiny skin, glossy eyes and smooth, thin body will sure spice up your runtime! All created with passion to provide high quality product. She can be shy girl, she can be tough girl, she can be naughty and she can be a warrior - you decide! Dress her in your favorite clothes, pose and render! Vesna character uses high quality texture maps and bump maps. Product Features:* Full Body Morph INJ/REM poses* Head Morph INJ/REM poses* Full Body Skin MAT pose* Full Body Skin with Tattoos MAT pose* 7 Eye Colors (plus default) MAT poses* 10 Lip MAT poses* 10 Makeup MAT poses* 2 Lash MAT poses* 6 Nails MAT poses* 1 Light (lt2/ png) 3rd party products needed:Victoria 4.2 BaseVictoria 4.2 Morphs++V4 Elite Body Shapes Clothing, hair, and poses not included. For use in Poser 6 and above. Content originally created by, and acquired from YURDigital.
Spartacus (for Poser): A Roman centurion to add to your scenes. Equipped with a sword and shield, this soldier is ready to take on any enemies!This is a low-poly figure, at 30,661 polygons, which makes it ideal for crowd scenes. Product Features:* Stand-alone Poser figure (obj, cr2/ png), at 30,661 polygons* All body parts are fully poseable.* Includes sword and shield.* Mouth and Face morphs:-Brow Up-Eyes Close-Mouth Open-Mouth Open1-Mouth Up-Angry-Jaw Up-Brow Up-Smile Textures:* One set of textures for the body, teeth, and shield at 4096x4096 pixels. Original model by Moscowich80, uploaded for sale here with permission.
Starship Bridge 6 (for Poser): Introducing the next Starship Bridge set for Poser. Designed for a more battle-ready starship, this bridge set is more compact than the other bridges.The captain sits directly behind the single-person helm console. Unlike the other bridges, there is no dedicated Ops station.To aid in combat situations, the two rear stations are dedicated to tactical displays, which can be configured to display weapons status, shield status, or strategic information.The front stations display the engineering and science readouts.At the rear of the bridge is a console which can be configured to display any of the ship`s functions. Product Features:* Includes one Poser figure model (obj, cr2, png)* Also includes a Poser scene file (pz3) with a light set Moving Parts:* As is usual for our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* All of the crew chairs can rotate around and move (all rotate and trans dials can be adjusted). Or, since they are separate Body parts, feel free to hide or show them depending on the needs of your scene.* The right and left doors can open and close (with an ERC dial on the Body).-Although all of the doors can open, there are no corridors behind the doors. We recommend using one of the many corridor sets, for sale here, for background hallways.* Hiding the left and right walls also hide the left and right doors.* The Rear Console is a separate part, which can be moved or hidden to suit the needs of your scene. Textures:* One set of textures is included.* Templates are included for all materials, and some are color-coded for ease-of-use. Poses:* Hide/ show each wall and the ceiling.* Hiding/ showing the Left Wall will also hide/ show the left door.* Hiding/ showing the Right Wall will also hide/ show the right door. Cameras:* Eight camera files are included.* The camera files also hide any walls which may be blocking the camera. Scene File:* The light set in the included scene file has Ambient Occlusion enabled for the top light.-This will create additional detailing, but may increase render times. Recommended for use in Poser 5 and above, though the Ambient Occlusion lighting will only work in Poser 6 and above.
F4B Phantom (for Poser): The F4 Phantom was a good aircraft in it's time but early versions had a few peculiarities that needed to be sorted out. Here I've depicted a Navy F4B of the Vf-92 "Silver Kings" Squadron flying from the USS Constellation as it would have appeared during the Vietnam Conflict. The Navy F4B differed from the Air Force F4C version in that it had a significantly shortened nose cone to facilitate lifting on Carrier elevators (The Air Force received the F4C which was effectively identical to the F4B but with a longer nose and different electronics). The early J-79 engines provided for the Phantom were very powerful, but the re-burners generated large smoke trails at mid-throttle/cruise settings making it easy to spot the aircraft in flight. This was later solved by upgrading the engines with a smokeless combustor which cleanly burned fuel in the exhaust. Here are some of the Highlights:* Over 50 Points of Articulation on the main figure!* Moving Flaps, Ailerons, Spoilers, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Tail Hook, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seats...* Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation!* Nose Radome opens to reveal the AN/APQ Radar Set.* Conforming Dummy Aircrew figure to use to place a Flight Crew in the Cockpit.* Conforming Crew Boarding Ladders and FOD Storage Covers for the Engines and Air Intakes.* 14 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the F4 Phantom, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing a total combination of over 100 variations of weapons loads that can be loaded based on mission requirements! Original model by Chris Schell and uploaded for sale here with permission.
Starship Bridge 17 (for Poser): This the main bridge of the USS Divine Land, launched in the early 22nd century from the Los Angeles Shipyards.The bridge is connected to the rest of the ship via 3 elevator lifts: 1 on the left and 2 on the right. A conference room behind the bridge is convenient place for the crew to meet and plan their actions.A set of desk and chairs to the right of the conference area allows for more private meetings. The conference room includes 8 chairs and there are 3 chairs around the desk. Product Features:* Includes 2 Poser figure files (obj, cr2/ png)- Bridge, with 151,770 polygons.- Chair, with 1,531 polygons.* All of the chairs on the bridge are separate parts: the chair top can rotate and the chair can move back and forth on the rail.- Both the position and rotation of the chairs can be adjusted using Pose Control dials on the Body.* All of the chairs in the rear rooms can be rotated or repositioned in the scene.* The captain's chair can rotate, with a Pose Control on the Body.* The left and right stand-up stations can be hidden or shown to further customize your scene.* All of the walls can be hidden or shown to suit the needs of your scene.* The left, rear, and right doors can open and close with Pose Controls dials on the Body.- The lift interiors can be seen when the doors are opened. Textures:* Multiple "Light" materials for more customization.* One set of texture maps. Hide/ Show Presets:* Hide/ show each wall, the columns, and the ceiling.- Hiding and showing each wall hides and shows the corresponding doors. Cameras:* Twenty-four camera files are included.* The camera files also hide any walls which may be blocking the camera.- You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. All sales images rendered in Poser Pro using a combination of lights and Indirect Lighting (IDL). Designed for use in Poser 6 and above and not supported in any other software. Original model by Richard Duda and uploaded for sale here with permission.
YF-35 Reactive Armour (for Poser): During the Solinoid/UN Protectorate War, it was determined that heavier fire-power was needed for UN forces to confront the enemy fleets. In response to this need, UN Forces began in secret to develop a blow-away, Reactive Armour System to better protect their transforming fighters in heavy combat. The new armour more than doubled the weapons loads of the fighters, but unfortunately limits them to Mecha-mode only while the armour is worn. Once the armour and it's weapons are depleted, the Reactive Armouring may be jettisoned by the pilot restoring mobility to the aircraft. This version of the Reactive Armour was developed to allow the two-mode Warthog to enhance both it's fire-power and Electronic Warfare capabilities. It is often deployed to act as a forward fire controller for Armoured AVF-35-J's when heavy combat is expected! Here are some of the highlights:* Over 30 missiles that can be fired individually, in small groups, or all at once from easy to use ERC dials!* Missile hatches can be opened and closed via ERC dials for ease of use...* 5 Separate Conforming Armour parts (Back-pack, Left and Right Arms and Legs) with fully controllable ordinance deployment. * Numerous ERC controls on the armour components for complete control of most vital functions from 1 location.* Daz Studio users can take advantage of the conforming items abilities to use the "Death Blossom" ERC Dial on the Main YF-35 Warthog to fire all missiles from the fighter and all armour parts from one dial!* The main YF-35 Warthog Figure will need to be transformed to Close-Combat Configuration for this product set to function properly! Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Imperial Princess (V4) (for Poser): A costume for a princess from a far-away galaxy. Is she in need of rescuing or can she handle her own affairs? Product Features:* Poser figures: obj, cr2/ png:- Bracelets, at 4,728 polygons.- Crown, at 4,462 polygons.- Dress, at 39,863 polygons.-- Includes "handles" to change the shape and direction of the front and rear dress.-- Includes four colors for the skirts: blue, green, red, and white- Necklace, at 3,700 polygons.- Shoes, at 9,718 polygons. Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Also includes a "HighHeelShoes" pose for V4's feet so they'll fit in the high-heel shoes. Textures/ Material Files:* One set of texture, specular, and normal bump maps, at 2048x2048 pixels.* Includes material collection files for BOTH Firefly and Superfly. * All clothing files include the usual morphs to fit your V4 character Requires the previous download and installation of Victoria 4 (V4) from DAZ. For use in Poser 6 and above: uses Superfly materials and weight maps. All images rendered in Poser 11. Original design commissioned from cathrine6mirror.Clothing models created by and commissioned from dodger.
Three Store Building (for Poser): This is a model of a typical city building with 3 storefronts.This is a facade only and there are no moving parts. Product Features:* Poser figure: obj, cr2/ png, with 45,959 polygons.* Does not include any moving parts. Textures:* One texture scheme.* Some materials, such as glass and metal use Poser shaders. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Shuttle Type 6 (for Poser): This shuttle is designed to take the crew from the ship to another location.Two chairs in the front allow a pilot and co-pilot to fly the shuttle.The bench-seating in the rear can seat multiple crew members or the benches can be removed for more cargo space. Product Features:* Poser figure: obj, cr2/ png, with 18,476 polygons.* The rear door can open, with Pose Control dial on the Body.* Both chairs can rotate, with Pose Control dials on the Body.* The left and right benches are separate parts, which can be hidden or shown. Textures/ Materials:* Three texture schemes with material files to apply them:- Blue (UPF-002)- Gray (UPF-001)- Red and White Medical (UPF-011) All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by Richard Duda and uploaded for sale here with permission.
Mayan City: Set (for Poser): Realistic and highly researched, this highly detailed pack provides a Mayan styled city with pyramids, shrines, and an assortment of other buildings. Place these models in a deep jungle or let your adventurers climb the steps to the top. What will they find there? A hidden entrance to tombs full of treasure? Or altars to human sacrifice? These buildings are low polygon and work great as background buildings... and the 4096x4096 textures mean the buildings will also look great close-up. Product Features:* Includes the following Poser figures: (obj, cr2/ png):Mayan Building 1, at 2,900 polygons; no moving parts.Mayan Building 2, at 1,068 polygons; has an interior, but no separate walls.Mayan Building 3, at 709 polygons; no moving parts.Mayan Building 4, at 6,670 polygons; has an interior, but no separate walls.Mayan Building 5, at 1,134 polygons. Includes a ceiling and 4 walls which can be hidden or shown.Mayan Building 6, at 3,732 polygons; no moving parts and no interior.Mayan Building 7, at 1,244 polygons; has an interior, but no separate walls.Mayan Building 8, at 236 polygons; no moving parts and no interior.Mayan Building 9, at 486 polygons; no moving parts and no interior.Mayan Building 10, at 1,594 polygons; no moving parts and no interior.Floral Base, at 28 polygons; no moving parts. Perfect as a garden planter or pathway divider. Experiment with your own grass shader for a different look.Mayan Base, at 46 polygons; no moving parts. Perfect as a garden planter or pathway divider. Experiment with your own tile shader for a different look.Mayan Temple 1, at 2,452 polygons; no moving parts and no interior.Mayan Temple 2, at 3,366 polygons; no moving parts and no interior.Mayan Pyramid 1, at 2,326 polygons; no moving parts and no interior.Mayan Pyramid 2, at 1,978 polygons; no moving parts and no interior.Mayan Pyramid 3, at 9,322 polygons; no moving parts and no interior. Textures:* One set of texture maps, at 4096x4096 pixels, with the floor texture map at 2048x1024 pixels. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio. This model is fully licensed for use in games and apps.Also works great as background scene-filler. Original model by Arteria3D and uploaded for sale here with full permission.
Crew Quarters (for Poser): Let you crew members relax while they're not on duty.Includes a king-sized bed, a couch and chair in the main room, a chair in the desk nook.Also includes a separate bathroom with a shower. Includes a hallway behind the room. The doors on the hallways can open and close, but there are no hallways on the other sides of the doors. Product Features:* Includes the following Poser figures (obj, cr2/ png):- Chair 1, at 1,257 polygons.- Chair 2, at 2,380 polygons.- Couch, at 2,380 polygons.- Table, at 876 polygons.- Room 1 (without furniture), at 98,385 polygons.- Room 2 (with all furniture in the scene and parented to the room) Room Features:* All walls (and the ceiling) can be hidden for easier camera placement.* Includes 7 doors which can open and close (with an ERC dials on the BODY).* The bed is a separate part which can be hidden/ shown or repositioned to suit the needs of your scene.* The front wall includes an exterior wall so you can make scenes looking in from the windows. Textures:* One set of textures is included.* This model uses Poser`s shader nodes for some materials.* All of the monitor screens use their own texture map, which makes it easy to change the screens and customize the room to suit the needs of your scene. Poses:* Hide/ show each wall and the ceiling.* Hiding and showing the left wall hides and shows the left doors, hiding the right wall hides and shows the right doors.. Cameras:* Nine camera files are included.* The camera files also hide any walls which may be blocking the camera.* Use these to render your scene or as a starting point. All of the sales images were created using the included camera files. Recommended for use in Poser 5 and above; has not been tested in DAZ Studio.
Viking Town: Set 2 (for Poser): Transport your characters to the time of the Vikings, where marauders roamed the seas and villages were pillaged every day.This set of buildings and props will let you create your own Viking village, wherever your character may set up their base camp. Includes buildings, logs, stones, a longboat, and more. Product Features:* Includes the following Poser figures: (obj, cr2/ png), some of which have separate parts that can be hidden/ shown or repositioned.- Building 05, at 7121 polygons. Parts: fire pit, 2 beds, 1 seat, and 1 table. An interior can be seen through the open doorway.- Building 06, at 6554 polygons. Parts: fire pit, 8 beds, 7 seats, and 5 stools. An interior can be seen through the open doorway.- Building 07, at 3175 polygons. No moving parts and no interior.- Building 08, at 2781 polygons. Parts: 2 beds, 3 seats, 2 stools, and 1 table. An interior can be seen through the open doorway.- Building 09, at 331 polygons. No moving parts.- Cart 1, at 1631 polygons. Parts: handle, left and right wheels.- Cart 2, at 1332 polygons. Parts: left and right wheels.- Longboat, at 2372 polygons. Parts: sail, which can be hidden or shown. Textures:* One set of texture maps with corresponding normal/ bump maps, at 1024x1024 and 2048x2048 pixels. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Caravan Minivan (for Poser): This 4-door family minivan is inspired by the design of the Dodge Caravan.The Dodge Caravan is a family minivan manufactured by Chrysler Group LLC and sold under its Dodge brand. Along with its nameplate variant, the Plymouth Voyager, the Caravan was introduced for the 1984 model year. In 1987, the Dodge Grand Caravan long-wheelbase (LWB) model was introduced and sold alongside the short-wheelbase (SWB) Caravan. The SWB model was discontinued after the 2007 model year; and, since the 2008 model year, the van has been sold only under the Grand Caravan nameplate.Product Features:* Poser figure: includes obj, cr2/ png, at 220,230 polygons* An ERC dial on the BODY rotates all four wheels.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel.* Rear trunk can open and close, with an ERC dial on the BODY.* Hood can not open and close and there is no engine.* Right and left front doors can open and close (by rotating open), with an ERC dial on the BODY.* Right and left rear doors can open and close (by moving out, then back), with an ERC dial on the BODY.* ALL six seats can move forward and backward to accommodate the various Poser figures.-The seats can also be hidden or shown to suit the needs of your scene.* Emergency brake lever can raise up and down.* The front license plate can be hidden or shown to suit the needs of your scene.* Tire treads have modelled detail, which means you don't need to apply a bump map or displacement map.Textures/ MAT Poses:* Six textures/ MAT poses:* Five textures/ MAT poses for the license plateAlso includes corresponding displacement maps to simulate raised lettering on the plates.-Displacement mapping adds extra realism as the plate-lettering is three-dimensional.The license plate is mapped the same as our other cars and trucks, which means you can use those textures on this model.* Displacement maps for the dashboard instruments add extra detailing.* Accurately reflecting mirrors.* Templates are included and some are color-coded.For use in Poser 5 and above: uses procedural materials such as reflection, displacement, and blinn.Note: All sales images were rendered in Poser 6. No post-work was used except for compositing.Sales images #3 and #4 use a background by mrsparky.
K-2SO (for Poser): K-2SO (Kay-Tuesso), abbreviated K-2 was a KX-series security droid originally created for use in the Galactic Empire's armed forces. K-2SO is voiced and portrayed in motion capture by Alan Tudyk in Rogue One: A Star Wars Story. Model Features:* Poser figure: obj, cr2/ png, with 160,063 polygons.* All parts are completely rigged: legs, arms, hands, fingers, and head.* The left and right hands include a Grasp pose control dial.* The two rear antennae are separate parts that can be hidden or shown.* The head and hands are named the same as the Poser figures so the Head and Left Hand and Right Hand cameras will focus on those body parts. Textures:* One set of texture maps. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software.
Ferrari 360 Spider 2000 (for Poser): The Ferrari 360 is a two-seater sports car built by Ferrari from 1999 to 2005. It succeeded the Ferrari F355 and was replaced by the Ferrari F430. It is a mid-engined, rear wheel drive V8-powered coupe. This digital model is based on the 2000 version of the Ferrari 360 Spider. Product Features:* Poser figure file: obj, cr2/ png, with 451,118 polygons.* Digitally scanned from the actual car, which gives the digital model a highly accurate shape.* All four wheels have treads modelled into the mesh, so there's no need for bump maps.* Highly detailed interior with modelled dials and switches.* Left and right doors can open and close (with ERC dials on the BODY).* An ERC dial on the BODY rotates all four wheels.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel.* The trunk can open and close (with an ERC dial on the BODY).* A highly detailed rear engine which can be seen through the rear window or when the trunk is opened.* Two levers on the steering column can move up and down.* Three foot pedals can rotate front-to-back.* The gear shift can move left-to-right and front-to-back.* The seats do not move.* The front hood does not open. Textures:* Textures for the instrument panel and logos are included.* The rest of the materials use Poser shaders, such as fabric, reflection, etc. Material Collection Files:* Body Metal:- One hundred sixty (160) material files:- Twenty (20) colors with eight (8) variations of each color.These material files will also work on all of the past and future Vanishing Point and Digimation cars and trucks.* License plates:- Forty (40) designs, including US states, Canadian provinces, and Diplomat.- All designs include a corresponding displacement map to increase realism and make the license plate look 3-dimensional.- A hide/ show file for the front plate (for use on cars that have a front plate).These license plates will also work on all of the past and future Vanishing Point and Digimation cars and trucks.* All of these files are material collection files, which means you do not have to select the exact material on the model to apply them. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 5 and above. Original model by Digimation and sold here with permission.
Medieval Market 1 (for Poser): The marketplace is open! Come for the shopping and stay for the unique architecture of the surrounding buildings.Use this set of stalls and buildings to create your own medieval-style market. Product Features:* Poser figure: obj, cr2/ png:* Bread Stall: 4,000 polygons- Includes 2 tables, 12 bread parts on the front table, and 12 bread parts on the rear table, all of which can be hidden/ shown or repositioned.- Includes separate materials for the wood, bread, and cloth, making it easier to recolor the model.* Clothing Stall: 1,409 polygons- Includes clothing line, table, bolts, 3 drapes, and a pile on the table, all of which can be hidden/ shown or repositioned.- Includes separate materials for the wood, clothing, and cloth, making it easier to recolor the model.* Fish Stall: 4,450 polygons- Includes 4 hanging fish groups, table, and 4 fish groups on the table, all of which can be hidden/ shown or repositioned. - Includes separate materials for the wood, fish, and cloth, making it easier to recolor the model.* Fruit Stall: 5,157 polygons- Includes a front shelf, table, and 2 fruit groups on the table, all of which can be hidden/ shown or repositioned.- Includes separate materials for the wood, fruit, vegetables, and cloth, making it easier to recolor the model.* Spice Stall: 1,955 polygons- Includes a front shelf, table, and 5 barrels, all of which can be hidden/ shown or repositioned.- Includes separate materials for the wood, spices, and cloth, making it easier to recolor the model.* Guildhall: 1,426 polygons, no moving parts.* Medieval Cart: 1,294 polygons- Includes left and right wheels with ERC dials to rotate the wheels together and in opposite directions.* Medieval Shop: 3,405 polygons- Includes a front sign that can be hidden or shown (but not moved).* Towngate: 2,131 polygons, no moving parts. Textures:* One set of photo-realistic texture maps, ranging in size from 1024x1024 to 2048x2048 to 4096x4096 with corresponding normal/ bump maps. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Solinoid Arcuilaria (for Poser): The largest of the Solinoid Fleet ships, the Arcuilaria Hive Carrier (Codenamed Chrysalis Hive by UN Forces) is a massive vessel with incredible destructive power. Armed with numerous Beam Cannons, Tri-barreled Laser weapons, and a massive Focused Beam Array weapon, the Hive Carrier can deliver unparalleled destruction to its target. The Arcuilaria is also home to a Solinoid Hive Queen and her swarms. The Hive Queen has her own separate nest atop the hull of the Arcuilaria in a bridge-like structure, and the hull houses swarms of Solinoid Worker Drones, advance bio-engineered Human-oid Clones, and egg chambers. The Solinoid Arcuilaria has space in its pod-like Hangar Bays for 100's of Vendrik and Mogwai Fighters, and can launch them in massive swarms at any enemy it faces. Within the huge Hangar Pods, the Solinoid Fighter swarms are maintained in a state of stasis awaiting an order to awaken from the Queen. The Arquilaria class also acts as a sort of Fleet Command and Control ship, and can call on the resources of her escorts, as well as commanding her own assets. Serving as Division Flag-ships, the Arcuilaria is never encountered without a host of smaller support vessels near by. The UN Military has counted dozens of the class in the Solinoid Main Fleet, among hundreds of smaller Vessels. It is feared that even larger vessels may remain out of sight beyond the edges of our solar system. Here are some of the highlights:* Over 100 Points of Articulation on the main figure!* Over 70 individually pose-able Weapons Turrets that can be trained and elevated independently.* Working Main Cannon, Beam and Tri-barrel Turrets, and Hangar Pods* Detailed Interiors for the Hangar Pods, and the Command Bridge.* Pose presets to adjust the scale to Life-sized and back to the Default 1/10th scale to allow users to scale the carrier to match the life-sized scale of my transforming Variable Geometry Fighters.Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Shanty Town Buildings 1: Set Accs (for Poser): This town has seen better days. What happened here? Did a storm come through the area and destroy all the buildings? Where the people forced to evacuate?Or was this town created by people who couldn't live anywhere else? Are these ramshackle buildings their permanent home or do they hope for something more. Combine the accessories and buildings to make your own shanty town:* Add fencing sections around a building.* Add metal panels to the walls.* Add and rotate the buildings.* Some buildings have separate parts which can be repositioned or hidden/ shown for more versatility.* Does not include a terrain or ground. We recommend using your own shader or texture on Poser`s Ground Plane. Product Features, Accessories:* Includes the following Poser figures: (obj, cr2/ png): - Clothes Line, at 1,776 polygons. All 5 hanging clothing items are separate parts.- Container, at 182 polygons; no moving parts.- Door 1, at 86 polygons; no moving parts.- Fence Section, at 2,075 polygons; no moving parts.- Metal Panel A, at 85 polygons; no moving parts.- Metal Panel C, at 170 polygons; no moving parts.- Rubble Pile, at 1,297 polygons. Includes 3 tires and 1 pipe.- Ruined Car, at 2,075 polygons; no moving parts.- Tire stack, at 1,820 polygons; no moving parts. Textures:* One set of texture maps with corresponding normal/ bump maps, at 2048x2048 pixels. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio; although DAZ Studio may import the files, we do not use DAZ Studio and can't support any issues that may occur. Original model by Arteria3D and uploaded for sale here with full permission.
Prowler (for Poser): The Plymouth Prowler, later the Chrysler Prowler, is a "retro" styled production car built in 1997 and 1999-2002.The design of the Prowler was said to have been inspired after engineers were given free rein to create whatever they wanted in a "hot rod" or "sportster" type vehicle. One of the most striking design features of the Prowler are the open, Indy racer style front wheels. This digital model is based on the 1997 version of the open-top Plymouth Prowler. Digitally scanned from the actual car, which gives the digital model a highly accurate shape. Product Features:* Poser figure (obj, cr2/ png), with approx 30,191 polygons.* Doors can open and close (with ERC dials on the BODY).* An ERC dial on the BODY rotates all four wheels.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel.* The trunk can open and close (with an ERC dial on the BODY).- Includes a basic trunk interior.* The front seats can move forward and back to accommodate the various Poser figures. Textures:* Body metal:- Black- Blue- Green- Purple- Red- Yellow* License plates:- Alabama- California- Florida (shark)- Montana- NevadaAlso includes corresponding displacement maps to simulate raised lettering on the plates.-Displacement mapping adds extra realism as the plate-lettering is three-dimensional.The license plate is mapped the same as our other cars and trucks, which means you can use those textures on this model.* Bump map on the tires create tread detailing.* Accurately reflecting mirrors.* Templates are included and some are color-coded.* Textured using a combination of texture maps and Poser shader nodes. Texture maps for the fabric materials are included if you want to use this model in another software program. For use in Poser 6 and above. Original model by Digimation, uploaded for sale here with permission.
AVF-35-J Wildhog AVGF (for Poser): The current pinnacle of Variable Geometry Fighter Development, the AVF-35 Wildhog is a next generation Variable Mecha. Developed by Earth Avionics from their highly successful VGF-14 Wildcat, the AVF-35 resulted from the YF-35 Warthog prototype test series of Mecha, and a series of now abandoned Space Combat Upgrade systems for the older VGF-14. This Aircraft features fully functional flight surfaces and controls (the cockpit controls move when the ERC Dials are used to move the aircraft) and also a full transformation capability from Aircraft Mode to Close-Combat Mode and Mecha Mode! Product Features:* Poser figure: obj, cr2/ png, with 61,433 polygons.* Includes one Poser figure which can transform into 3 modes: aircraft, mecha, and robot.* Over 75 Points of Articulation on the main figure!* Moving Flaps, Ailerons, Rudders, Opening Landing Gear Doors, Raising and Lowering Gear, turning wheels, Opening Canopies, Deployable slats, Deployable Landing Hook, Deployable Catapult Bar, moving Sticks and Throttle, Deployable Emergency Drag Chute, working Intake Seals,Transformation Lever, moving Rudder Pedals, fully independently controllable missiles, and much more...* Separate Conforming Figure Weapons and Ordinance, with fully controllable ordinance deployment (Some sold as separate packs). Includes a set of conforming Missiles, smart-parented Chaff/Flare Pod, and fully functional Collapsible Gun Pod.* Comes in 4 fully rigged variants (A,D,J and S-Types) that share common geometry but load from independant CR2's for each type.* Includes Smart-Parented Dummy Pilot figure (un-rigged and non-poseable) to place in the Cockpit (loads automatically parented to the Ejection Seat). Also includes a pose-able Crew Boarding Ladder.* Over 250 Independent ERC controls on the main figure for complete control of most vital functions from 1 location.* Independent ERC controls for each moving part.* Articulated Landing gear with co-ordinated ERC for 1 dial raise and lower.* ERC Landing Hook and Catapult arm.* ERC weapons controls for launching steer-able missiles and ordinance.* ERC dials for easy transformation to each of 3-modes!* Pre-Posed Poses for Fighter configuration, Close-Combat Configuration and Mecha Configuration.* Fit-to Poses for the Gunpod for all 3 modes. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Americana Motor Court (for Poser): This is a model of a motor court, also known as a motel. Motor courts were usually found on most major highways and had lower prices than hotels. But as interstate roads started to develop, motor courts started to decline in popularity. This model features 14 buildings, 4 picnic tables, a sign, and a backdrop. And although the buildings may look the same, your characters can check-in in the middle building- just look for the sign! Product Features:* Poser figure: obj, cr2/ png, with 96,132 polygons.* Includes the following parts:- Backdrop: can be rotated or repositioned. Uses maximized mapping which means you can use your own textures for the background.- 7 Houses on the left: can be hidden or shown- 7 Houses on the right: can be hidden or shown- Large sign: can be hidden or shown- 4 Tables: can be rotated or repositioned Textures:* One texture scheme.* The grass material uses Poser displacement mapping to create more realistic grass. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Romero GX-500 (for Poser): This is the newest luxury off-road vehicle for use in Poser. It includes 4 doors, a large trunk page, and seating for 5 adults.The steering wheel can be easily moved to the right or left, which makes it perfect for scenes where your character is driving in the US or the UK. Also includes the entire Vanishing Point car material library: 160 body metal shaders and 40 license plate designs. Product Features:* Poser figure: obj, cr2/ png, with 168,993 polygons.* Left and right doors can open and close, with ERC dials on the Body.* All four wheels can rotate, with an ERC dial on the Body* Steering wheel is turnable and an ERC dial on the Body affects both the front wheels and steering wheel.* The tailgate can open and close, with an ERC dial on the Body.* The rearview mirror can rotate, with an ERC dial on the Body.* The seats can move front-to back to accommodate different sized Poser figures.* The steering wheel can be positioned on the right or left side.* The hood does not open. Textures:* Texture maps for the brake discs and tires are included.* The rest of the materials use Poser shaders, such as fabric, reflection, etc. .: Material Collection Files :.* Body Metal:- One hundred sixty (160) material files:- Twenty (20) colors with eight (8) variations of each color.These material files will also work on all of the past and future Vanishing Point and Digimation cars and trucks.* License plates:- Forty (40) designs, including US states, Canadian provinces, and Diplomat.- All designs include a corresponding displacement map to increase realism and make the license plate look 3-dimensional.- A hide/ show file for the front plate (for use on cars that have a front plate).These license plates will also work on all of the past and future Vanishing Point and Digimation cars and trucks.* All of these files are material collection files, which means you do not have to select the exact material on the model to apply them. This product is designed for use in Poser 5 and above. A version optimized for use in DAZ Studio is available separately. All images rendered in Poser Pro 2012 Originally created by and acquired from PoserWorld.
MiG-17 Fresco F (for Poser): Made famous by the Vietnam War, the MiG-17F was the primary enemy aircraft engaged in the skies over Vietnam by U.S. aircraft, such as the A-4, A-7, F-8, B-52, F-100, F-105 and its primary nemesis, the F-4 Phantom II. In 1960, the first group of approximately 50 North Vietnamese airmen were transferred to the PRC to begin transitional training onto the MiG-17. At this time the first detachment of Chinese trained MiG-15 pilots had returned to North Vietnam, and a group of 31 airmen were deployed to the North Vietnamese Air Force base at Son Dong for conversion to the MiG-17. By 1962 the first North Vietnamese pilots had finished their MiG-17 courses in the Soviet Union and the PRC, and returned to their units; to mark the occasion, the Soviets sent as a "gift" 36 MiG-17 fighters and MiG-15UTI trainers to Hanoi in February 1964. These airmen would create North Vietnam's first jet fighter regiment, the 921st. Here are some of the Highlights:* Over 50 Points of Articulation on the main figure!* Moving Flaps, Ailerons, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seat...* Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation!* Conforming Dummy Aircrew figure to use to place a Pilot in the Cockpit.* Conforming Crew Boarding Ladder and FOD Storage Covers for the Engine and Air Intake.* 3 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the MiG-17 Fresco, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing large variations of weapons loads that can be added based on mission requirements! Original model by Chris Schell and uploaded for sale here with permission.
Police Station Interior (for Poser): In our local small-town police station, we have a dispatch area that is shared with the front desk of the station that serves the people of your town. We have a few holding cells for some rowdy people that just need a night to sleep it off. These holding cells are made up of several barred cells. With a bed, thin mattress, a blanket, and pillow, toilet, and sink in the corner. There are two interrogation rooms where persons of interest are questioned with one-way windows/mirrors with police officers/ detectives on the other side who watch the interrogation and the suspect. The processing area is a big enough space to take pictures of our more serious offenders, as well as utilizing it as a holding space. We also have awaiting area and a locker room you’ll find lockers assigned to police officers where they store their clothing, shoes, and personal hygiene products. Product Features:* Poser figure: obj, cr2/ png, with 237,240 polygons.* 5 office doors can open, with Pose Control dials on the Body.* 4 jail cell doors can open, with Pose Control dials on the Body.* Includes these parts which can be rotated or repositioned in the scene:- 3 Benches (in the right-rear room)- 2 Tables (in the interview rooms)- 4 Chairs (in the interview rooms)- Measuring Stick* Includes these parts which can be hidden/ shown but not repositioned:- Bannister- 2 Benches (in the lobby)- Book (on the desk)- Desk- Flags- Lamp (on the desk)- 2 Lockers- Microphone (on the desk)- Radiator- Radio (on the desk)- 3 Sinks (in the cells)- 2 Toilets (in the cells)- 8 Interior walls- 3 Interior walls with beds- 4 Left walls- 1 Rear wall- 1 Right wall- Ceiling Textures:* One set of texture maps. Hide/ Show Presets:* 38 files to hide the walls and the ceiling.- Hiding and showing the each wall hides and shows the corresponding door(s). Cameras:* Fourteen camera files are included.* The camera files also hide any walls which may be blocking the camera.- You can use these camera files to render the scene or use them as starting points. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Camera model shown in the sales images is available separately. Original model by Tony Rizo and uploaded for sale here with permission.
Console Room Interior (for Poser): This is a steampunk-styled sci-fi console control room. The main console in the center of the room can monitor all of the needed functions. The hexagonal design allows crew members and soldiers to quick pull up any information they need. Product Features:* Poser figure (obj, cr2/ png), with 184,264 polygons. Moving Parts:* As is usual for our sets, all walls (and the ceiling) can be hidden for easier camera placement.* The model also includes the following moving parts:- Main Doors- Monitor Arm1- Monitor Arm2- Air Con Door1- Air Con Door2- Closet Door- Air Con Door4- Console Door- Console Door1- Console Sliders- Console Cogs- Centre Unit- Centre Slider1- Centre Slider2 Textures:* One set of textures is included.* Some materials (such as the walls) use Poser's shader nodes (such as FBM and Noise). Cameras:* Twenty-two camera files are included.* The camera files also hide any walls which may be blocking the camera.You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. Designed for use in Poser 6 and above. All images rendered in Poser Pro using Indirect Lighting (IDL). Model originally made by mrsparky and commissioned for Julian Foot.Sold here with full permission. Note: This is an interior set. Due to this, the model may not render correctly from the outside.
Veronica de Vrais (V4) (for Poser): With her glossy eyes, subtle smile and perfect skin, Veronica de Vrais is your choice for elegant, romantic renders. She's perfect for any scene that calls for strong yet delicate woman. With natural makeup options being everyday, classic woman, she likes to wear stronger eyes shadows too. As a bonus you get 4 full face makeups that turn your Veronica into horror girl, they match the blood skin option. This makes perfect choice for Gothic, dark renders to which Veronica's dark or red eyes will sure bring a special touch. Product Features:* Custom Head Inject and Remove pose* Full Body Inject and Remove pose* Skin Natural Option MAT pose* Skin Blood Option MAT pose* 13 Eye Color MAT poses* 13 Makeup MAT poses* 4 Bloody MAT poses* 3 Lashes MAT poses* 68 Texture Maps in Total 3rd party products needed:Victoria 4.2 BaseVictoria 4.2 Morphs++V4 Elite Body Shapes Clothing, hair, and poses not included. For use in Poser 6 and above. Content originally created by, and acquired from YURDigital.
Cosmo Zero Fighter (for Poser): The Cosmo Zero Fighter from Space Battleship Yamato (Star Blazers) for Poser.This was the main aircraft flown by Susumu Kodai (Derek Wildstar in Star Blazers), which was usually launched from one of the catapults on the top deck near the sternModel Features:* Poser figure file: obj, cr2/ png, with 20,537 polygons.* Moving parts:- Canopy, with an ERC dial on the Body.- Rudder, with an ERC dial on the Body.- Left and right elevators, with ERC dials on the Body for UpDown and Bank.- Landing gear, with an ERC dial on the Body.- Landing gear doors, with an ERC dial on the Body.- Stick and throttle in the canopy.- Left and right air brakes.- Bottom rudder.- Bottom tail fin can retract into the hull for landing.- Left and right tanks are separate parts which can be hidden or shown or repositioned in the scene.Poses:* In Flight: landing gear retracted, landing gear doors closed, and bottom tailfin extended.* Landed: landing gear extended, landing gear doors open, and bottom tailfin retracted.* Hide/ show left tank* Hide/ show right tankTextures:* Includes texture, specular, and normal/ bump maps.Note: the texture map may look pixellated when viewed close-up.For use in Poser 6 and above.Original flight-sim model by: Kazunori Itofbx conversion by: Michael Pook
Sci-Fi Float Mine (for Poser): A simple Floating mine figure for use in your sci-fi environments… includes a morph to open it for an "armed" or close it for a "Seeking" position. Includes obj, cr2/ png, and 1 set of textures. Original model by Chris Schell and uploaded here with permission.
Solinoid Vendrik (for Poser): The Solinoid Vendrik is the mainstay of the Solinoid Fleet. Unable to access fold-space under its own power, the Vendrik is only found in the company of Solinoid Fleet vessels and must be carried into battle aboard a larger ship. Deployed in the 100's from Solinoid Hive Carriers, the Vendrik is small, nimble, and deadly. Product Features:* Poser figure: obj, cr2/ png, with 65,211 polygons.* Over 15 Points of Articulation on the main figure!* Raising and Lowering Gear, Opening Canopies, fully independently controllable missiles, and much more...* Separate Conforming Figure Weapons and Ordinance, with fully controllable ordinance deployment. (Some sold as separate packs)* Over 50 Independent ERC controls on the main figure for complete control of most vital functions from 1 location.* Independent ERC controls for each moving part.* Articulated Landing gear with co-ordinated ERC for 1 dial raise and lower.* ERC weapons controls for launching and steer-able missiles and ordinance.* Pre-Posed Poses for various flight and landing positions.No additional files will be needed to use this product... it is a stand-alone figure! Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
VIP Guest Room (for Poser): When VIP`s board your ship, you can`t have them staying in the regular quarters. Those are for your crew members! Instead, let them visit in luxury, with this VIP guest room. Product Features:* Includes the following Poser figures (obj, cr2/ png):- Chair 1, at 9,151 polygons.- Chair 2, at 4,310 polygons.- Couch, at 4,310 polygons.- Credenza, at 1,207 polygons.- Desk Chair, at 12,651 polygons; the top of this chair can lean back and the bottom can rotate.- Stand 1, at 1,186 polygons.- Stand 2, at 1,186 polygons.- Table, at 1,052 polygons.- Room 1 (without furniture), at 93,718 polygons.- Room 2 (with all furniture in the scene and parented to the room) Room Features:* All walls (and the ceiling) can be hidden for easier camera placement.* Includes 5 doors which can open and close, with ERC dials on the Body.* The bed is a separate part which can be hidden/ shown or repositioned to suit the needs of your scene.* The front wall includes an exterior wall so you can make scenes looking in from the windows.* Includes the hallway shown behind the room. The doors between the room and hallways can open and close, but there are no hallways on the other sides of the doors. Textures:* One set of textures is included.* This model uses Poser`s shader nodes for some materials. Poses:* Hide/ show each wall and the ceiling, desk, and bed.* Hiding and showing the walls also hides and shows the doors located on the walls. Cameras:* Nine camera files are included.* The camera files also hide any walls which may be blocking the camera. All of the sales images were created using the included camera files. Recommended for use in Poser 6 and above; has not been tested in DAZ Studio.
Sassy Cowgirl (V4) (for Poser): This outfit is perfect, whether your character is going to a hoedown or if she just needs some country and western wear. Product Features:* Poser figures: obj, cr2/ png:* Boots, at 13,428 polygons* Hat, at 6,920 polygons* Shorts, at 6,366 polygons* Vest, at 6,877 polygons; includes 2 shape morphs:- Open A Bit- Open All Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Textures:* One set of textures for each clothing. Morphs:* Each clothing includes the usual shape morphs to fit your V4 character, where applicable Requires the previous download and installation of Victoria 4 (V4) and Vicky 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
A7D/E Corsair II (for Poser): In 1962, the United States Navy began preliminary work on VAX (Heavier-than-air, Attack, Experimental), a replacement for the A-4 Skyhawk with greater range and payload. Particular emphasis was placed on accurate delivery of weapons to reduce the cost per target. The requirements were finalized in 1963, announcing the VAL (Heavier-than-air, Attack, Light) competition. Here are some of the Highlights:* Over 50 Points of Articulation on the main figure!* Moving Flaps, Ailerons, Spoilers, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Tail Hook, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seat...* Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation!* Nose Radome opens to reveal the AN/APQ Radar Set.* Conforming Dummy Aircrew figure to use to place a Flight Crew in the Cockpit.* Conforming Crew Boarding Ladders and FOD Storage Covers for the Engine and Air Intake.* 12 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the A7 Corsair, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing a total combination of over 100 variations of weapons loads that can be loaded based on mission requirements! Original model by Chris Schell and uploaded for sale here with permission. For use in Poser 6 and above.
F8E Crusader (for Poser): The Vought F-8 Crusader (originally F8U) was a single-engine, supersonic, carrier-based air superiority jet aircraft built by Vought for the United States Navy and Marine Corps, replacing the Vought F7U Cutlass, and for the French Navy. The first F-8 prototype was ready for flight in February 1955. The F-8 served principally in the Vietnam War. The Crusader was the last American fighter with guns as the primary weapon, earning it the title "The Last of the Gunfighters". Here are some of the Highlights:* Over 50 Points of Articulation on the main figure!* Moving Flaps, Ailerons, Spoilers, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Tail Hook, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seats...* Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation!* Nose Radome opens to reveal the AN/APQ Radar Set.* Conforming Dummy Aircrew figure to use to place a Flight Crew in the Cockpit.* Conforming Crew Boarding Ladders and FOD Storage Covers for the Engines and Air Intakes.* 14 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the F4 Phantom, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing a total combination of over 100 variations of weapons loads that can be loaded based on mission requirements! No additional files will be needed to use this product... it is a stand-alone figure! Original model by Chris Schell and uploaded for sale here with permission. For use in Poser 6 and above.
Shanty Town Buildings 2: Farm (for Poser): This is a set of farm-style buildings, including a gated barn and houses on the site. Fence sections help herd the animals in the correct direction. These work great with the other Shanty Town models. Product Features:* Poser figure file: (obj, cr2/ png), at 3,406 polygons.* Includes the following parts which can be hidden, shown, or repositioned in the scene:* Six buildings.- Building 1 (the barn) has opening and closing front gates, with an ERC dial on the Body.- Note: the other buildings do not have interiors and the doors can not open.* Nine fence sections.- Fence 2 has an opening and closing gate, with an ERC dial on the Body.* Six rocks.(Animals not included.) Cameras:* 10 camera files are included.- Use these camera files to render your scene or use them as starting points. Textures:* One set of texture maps, at 2048x2048 and 4096x4096 pixels with corresponding normal/ bump maps. All sales images rendered in Poser Pro 2012 with the included camera presets. This product is designed for use in Poser 5 and above. Original model by Arteria3D and uploaded for sale here with full permission.
USS Tennessee Alternate Textures: A set of MAT poses in pz2 format to represent the USS Tennessee and USS California as they appeared in 1941 at Pearl Harbour. Also included is a MAT pose to restore the Tennessee to the default textures! Requires the purchase and installation of the USS Tennessee for Poser.
P-58 Stallion (for Poser): 1946, Guadalcanal. With the war dragging on, the Allied forces look to maintain a technologically superior edge. With a stalemate on land and at sea, and the rise of Aircraft like the Pfeil in Germany, and the Shinden in Japan, the US also looks to improved aircraft for it's embattled forces. Numerous conforming extras and over 50 ERC controls for the various parts of the aircraft to allow for maximum usability. Controls include some standard combat maneuvers as well as individual controls for the various moving parts on the aircraft. The model also features a fully detailed interior with working flight controls that are tied by ERC to the flight surfaces and moving parts of the aircraft. Also included are Optional Weapons Sets, a Dummy Pilot, Crew Boarding Ladder, and conforming Prop-Blur effect figures. Included conforming figure add-ons:* 1 set of conforming external "drop-tank" fuel tanks is included. These "drop-tanks" conform to the Stallion and are individually pose able so that the user can make them fall away and tumble as they drop, with ERC dials for ease of use.* 1 set of 2 conforming 500lb bombs, with ERC dials for ease of use.* 1 set of 6 conforming RP-3 individually pose-able rockets, with ERC dials for ease of use.* 1 pair of conforming 250lb bombs that can be individually posed, with ERC dials for ease of use.* 1 set of conforming "prop-blur" effects props for the propellers of the aircraft to give a sense of motion in flight.* 1 conforming "dummy" pilot figure (this figure is non-pose-able and doesn't not contain any joints or bones. This figure is low poly but is provided so that you can have a crew in the aircraft for your renders without needing to use the fully rigged figures). Product created by, and acquired from, Chris Schell, and is now owned by VanishingPoint.
Porsche Cayenne (for Poser): The Porsche Cayenne is a five seat mid-size luxury crossover manufactured by the German manufacturer Porsche since 2002, with North American sales beginning in 2003. Its platform was developed by Porsche and is shared with the Volkswagen Touareg and the Audi Q7. It is the first V8-engined vehicle built by Porsche since 1995, when the Porsche 928 was discontinued. Since 2008, all engines have featured direct injection technology. The Cayenne's chassis type numbers are as follows: Type 955 (2002–2006), Type 957 (2007–2010), and Type 958 (2011+).The second-generation Cayenne (Type 958) was unveiled at the 2010 Geneva Motor Show in March following an online reveal on February 25, 2010.The Cayenne's frame and doors are sourced from Volkswagen, who uses the frames and doors for the Volkswagen Touareg model. All other aspects of vehicle design, tuning and production are done in house at Porsche.Product Features:* Poser figure: includes obj, cr2/ png, 133,345 polygons:* An ERC dial on the BODY rotates all four wheels.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel.* Trunk can open and close, with an ERC dial on the BODY.* Right and left front doors can open and close, with an ERC dial on the BODY.* Right and left rear doors can open and close, with an ERC dial on the BODY.* The front seats can move forward and backward to accommodate the various Poser figures.* Front license plate can be hidden or shown, depending on the needs of your scene.* Hood can open and close, with an ERC dial on the BODY.- There is an engine under the hood.Textures/ MAT Poses:* Five textures/ MAT poses for the body metal* Five textures/ MAT poses for the license platesAlso includes corresponding displacement maps to simulate raised lettering on the plates.-Displacement mapping adds extra realism as the plate-lettering is three-dimensional.The license plate is mapped the same as our other cars and trucks, which means you can use those textures on this model.* Bump map on the tires create tread detailing.* Accurately reflecting mirrors.* Templates are included some are color-coded.Hide/ Show Poses:* Hide/ show front license plateFor use in Poser 5 and above: uses procedural materials such as reflection, displacement, and blinn. The fabric surfaces also use Poser's shader nodes.
Padova (M4) (for Poser): This is the perfect outfit whether you need a stylish outfit or something a little more causal, either for a night out on the town or just hanging around. Product Features:* Poser figures: obj, cr2/ png:* Hair, at 5,088 polygons* Pants with shoes, at 33,462 polygons* Shirt, at 6,496 polygons Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Textures:* One set of texture maps for each clothing. Morphs:* Each clothing includes the usual morphs to fit your M4 character Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Luxury Sedan Car 2 (for Poser): Inspired by the look and design of the Lexus IS 350, this new luxury sedan will take your characters around the town in style and comfort. Its interior can comfortably seat 4 figures, or even more if you lower the figure`s scale dial. This model includes the usual figures: all four doors can open, all wheels can rotate, the front wheels and steering wheel can rotate, and the trunk and hood can open. There's even a low-poly engine under the hood. Product Features:* Poser figure: includes obj, cr2/ png, at 25,027 polygons.* An ERC dial on the BODY rotates all four wheels.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel.* Rear trunk can open and close, with an ERC dial on the BODY.* Hood can open and close, with an ERC dial on the BODY.-A low-polygon engine can be seen when you open the hood.* Right and left front doors can open and close, with an ERC dial on the BODY.* The front seats can move forward and backward to accommodate the various Poser figures.* This car only has a rear license plate, which is not removable. Textures/ MAT Poses:* Six textures/ MAT poses:-Black-Blue-Gold (default)-Green-Purple-Silver* Four textures/ MAT poses for the license plate:-Maryland-Michigan-Florida-Colorado-LouisianaAlso includes corresponding displacement maps to simulate raised lettering on the plates.-Displacement mapping adds extra realism as the plate-lettering is three-dimensional.The license plate is mapped the same as our other cars and trucks, which means you can use those textures on this model.* Bump map on the tires create tread detailing.* Accurately reflecting mirrors.* The body metal, front bumper, and rear bumper are separate materials which means you can further customize the look of your car.* Templates are included and some are color-coded. For use in Poser 5 and above: uses procedural materials such as reflection, displacement, and blinn.
Pajamas (M4) (for Poser): A set of pajamas, perfect for bedtime or lounging around the house.Note: in 2020, this was the typical clothing for people who worked from home Product Features:* Poser figures: obj, cr2/ png:* Shorts, at 12,688 polygons; includes the following position morphs:- Loosen- Realistic* Top, at 23,952 polygons; includes the following position morphs:- OpenFull- LOut- LSide- ROut- RSide- Undo- Realistic Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Textures/ Materials:* One set of texture maps for each clothing.* Includes the following colors, for both the shorts and top:- Black fabric- Black velvet- Blue fabric- Blue velvet- Red fabric- Red velvet- Yellow fabric- Yellow velvet* These colors use Poser shader nodes. Morphs:* Each clothing includes the usual shape morphs to fit your M4 character Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Shanty Town Buildings 2: Set 2 (for Poser): The second set of buildings to build your own town and village. Includes 4 models which also work nicely with the other Shanty 2 Building Sets and the Shanty 2 Town Blocks. Some buildings have moving parts, such as doors and shelves which can be opened and closed, some buildings have stools which can be repositioned, and some buildings have a ceiling and walls which can be hidden or shown.Does not include a terrain or ground. Product Features:* Includes the following Poser figures: (obj. cr2/ png):- Building F, at 449 polygons. Includes a ceiling and 4 walls.- Building G, at 387 polygons; no moving parts and no interior.- Building H, at 150 polygons. Includes a ground-floor visible interior but no moving parts.- Building I, at 207 polygons; no moving parts and no interior. Textures:* One set of texture maps, at 4096x4096 pixels with corresponding normal/ bump maps, for each building. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Shanty Town Buildings 2: Set 5 (for Poser): The fifth set of buildings to build your own town and village. Includes 4 models which also work nicely with the other Shanty 2 Building Sets and the Shanty 2 Town Blocks. Some buildings have moving parts, such as doors and shelves which can be opened and closed, some buildings have stools which can be repositioned, and some buildings have a ceiling and walls which can be hidden or shown.Does not include a terrain or ground. Product Features:* Includes the following Poser figures: (obj. cr2/ png):- Building T, at 446 polygons. Includes an opening door, opening shelf, opening cabinet door, ceiling and 4 walls.- Building U, at 58 polygons; no moving parts and no interior.- Umbrella with Rocks, at 313 polygons; no moving parts.- Building V, at 462 polygons; no moving parts and no interior. Textures:* One set of texture maps, at 4096x4096 pixels with corresponding normal/ bump maps, for each building. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Batmobile Tumbler for Poser: The Batmobile `Tumbler` from "Batman Begins", "The Dark Knight", and "The Dark Knight Rises". Model Features:* Poser figure: obj, cr2/ png, with 26,507 polygons.* Scaled to the size of the Poser/ DAZ figures.* Front wheels can steer, which a Pose Control dial on the Body.* All wheels can rotate, which a Pose Control dial on the Body. Textures:* No textures are included. Designed for use in Poser 6 and above and not supported in any other software. All sales images rendered in Poser 11 with an HDRI skydome environment. Original model by Chris Kuhn and converted with his permission.
Engineering Room XT (for Poser): Introducing the latest room for Poser: the Engineering Room XT. From this room, the crew can monitor all the energy functions of the ship.The center table can be reprogrammed to display any data, and then send that data to any of the screens within the room or even to the bridge. The two-story tall warp core reactor funnels the fuel into a massive reaction which is then fed out to the engines via the main conduit in the rear. The crew can use either the side ladders or lifts to get to the rooms on the upper level. The upper levels include a utility room, which is currently being used as the main engineer's office (located in the upper right) and a conference room (located in the upper left). Product Features:* Includes three Poser figures (obj, cr2/ png):- Engineering Room XT, at 284,571 polygons.- Sci-Fi Chair 1, at 3,432 polygons, with the following moving parts:Bottom section can rotate (with an ERC dial on the BODY).Back section can tilt forward and back (with an ERC dial on the BODY).- Sci-Fi Chair 2, at 1,320 polygons. (This chair has no moving parts.)* The chairs will load with the room and are parented to the room's Body, but they're included as extra figure files in case you want to add more to your scene. Moving Parts:* Like our interior sets, all walls (and the ceiling) can be hidden for easier camera placement.* Five sets of doors can open and close (with an ERC dial on the Body for each set).Note that some doors open into interior rooms and some open to the exterior. There are no corridors behind the exterior doors. We recommend using one of the many corridor sets, for sale here, for background hallways.* Lift on the left side can move up and down (with an ERC dial on the Body).* Front gate can move left to right (with an ERC dial on the Body).* Warp core tray can move in and out (with an ERC dial on the Body). Textures:* One set of textures is included.* This model uses Poser`s shader nodes for some materials. Cameras:* Twenty-seven camera files are included.* The camera files also hide any walls which may be blocking the camera. Recommended for use in Poser 5 and above. Some sales images made by Estroyer.
P.I.C.K. Complete (for Poser): The P.I.C.K. Complete bundle includes seven popular P.I.C.K. products in one package at a fantastic savings! P.I.C.K. Base P.I.C.K. Bath & Shower Expansion Set: Includes:1 corner wall component1 divider component1 sink component2 cabinet components1 towel component1 toilet component1 whirlpool component2 bath components1 shower cubicle component1 bonus P.I.C.K. Locker Expansion Set shower component3 additional wall tiles P.I.C.K. Kitchen Expansion Set: Includes:2 Cooker Components (3D models - .PP2 and .OBJ formats)24 Base Cabinet Components (3D models - .PP2 and .OBJ formats)32 Wall Cabinet Components (3D models - .PP2 and .OBJ formats)16 LightFrame Components (3D models - .PP2 and .OBJ formats)3 Faucet Components (3D models - .PP2 and .OBJ formats)9 Sink Components (3D models - .PP2 and .OBJ formats)8 Tiling Components (3D models - .PP2 and .OBJ formats)161 preset materials (.MC6) P.I.C.K. Spiral Stairs Expansion Set: Includes:30 components (3D models - .PP2 and .OBJ formats)106 preset materials (.MC6)P.I.C.K. Windows Expansion Set: Includes:4 big window Components (3D models - .PP2 and .OBJ formats)4 skylight components (3D models - .PP2 and .OBJ formats)1 sash window (3D models - .PP2 and .OBJ formats)2 floor components (3D models - .PP2 and .OBJ formats) P.I.C.K. Lockers Expansion Set: Includes:1 base component (3D models - .PP2 and .OBJ formats)6 door components (3D models - .PP2 and .OBJ formats)4 window components (3D models - .PP2 and .OBJ formats)8 locker components (3D models - .PP2 and .OBJ formats)2 benches (3D models - .PP2 and .OBJ formats)2 coathangers (3D models - .PP2 and .OBJ formats)1 pipes component (3D models - .PP2 and .OBJ formats)additional floor and wall tiles (.MC6) Styles for P.I.C.K. (by DarkStarBurning):This highly versatile P.I.C.K. Expansion set includes both the Retro Wallpaper and Classic Floors collections. Mix and match to take your P.I.C.K. renders that one step further!Unique to this products and not found as a stand-alone product. Includes:8 new wood flooring MATs28 new tile flooring MATs18 new wallpaper materials For use in Poser 6 and above. Content originally created by, and acquired from YURDigital.
Solinoid Mogwai (Gremlin) (for Poser): The Discovery of an advanced transforming Alien Fighter crash on earth led us to the creation of the Warthog and Wildhog Variable Fighters. Now introducing the Solinoid Mogwai (Codenamed Gremlin by UN Forces), the fighter that gave us the leg up on transformation technology. Arriving in force in Terran Space, the Solinoid Invaders have launched an invasion from their home system of Solinides in the Solinides Star-cluster. Product Features:* Poser figure: obj, cr2/ png, with 118,837 polygons.* Includes one Poser figure which can transform into 2 modes: aircraft and mecha.* Over 75 Points of Articulation on the main figure!* Moving Flaps, Ailerons, Rudders, Opening Landing Gear Doors, Raising and Lowering Gear, turning wheels, Opening Canopies, Deployable slats, Deployable landing hook, deployable catapult bar, moving sticks and throttle, transformation leaver, moving pedal, fully independently controllable missiles, and much more...* Separate Conforming Figure Weapons and Ordinance, with fully controllable ordinance deployment. (Some sold as separate packs)* Separate Conforming and fully pose-able Optional Head Types * Over 250 Independent ERC controls on the main figure for complete control of most vital functions from 1 location.* Independent ERC controls for each flap, rudder, aileron, wing, and canopy.* Articulated Landing gear with co-ordinated ERC for 1 dial raise and lower.* ERC Landing Hook and Catapult arm.* ERC weapons controls for launching and steer-able missiles and ordinance.* ERC dials for easy transformation!* Pre-Posed Poses for Fighter configuration and Mecha Configuration.Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Sensor Maintenance Room (for Poser): Located in the middle of the starship, this room allows the crew access to the sensor equipment. The engineers can also perform routine and system maintenance on the sensor equipment without interrupting the bridge crew. Three chairs allow the crew members to sit down while performing their tasks, though more chairs can easily be brought in. Product Features:* Includes two Poser figures (obj, cr2/ png)- Sensor Maintenance Room, at approx 51,697 polygons.- Station Chair, at approx 2,851 polygons.* As is usual for our sets, all walls (and the ceiling) can be hidden for easier camera placement.* Two sets of left hallway doors can open and close, with an ERC dial on the Body.* Two sets of right hallway doors can open and close, with an ERC dial on the Body.* Two sets of inner doors can open and close, with an ERC dial on the Body.* Includes both the sensor maintenance room and the hallway section shown in the image.* The chair is a separate model and does not have any moving parts. Textures:* One color scheme for all the monitor displays is included. Poses:* Hide/ show poses for each wall and the ceiling, for both the bridge and hallway. Cameras:* Eleven camera files are included.* The camera files also hide any walls which may be blocking the camera.You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. Designed for use in Poser 5 and above. All images rendered in Poser Pro using a combination of lights and Indirect Lighting (IDL).All images rendered using the included camera presets.
Shanty Town Buildings 1: Set 1 (for Poser): This town has seen better days. What happened here? Did a storm come through the area and destroy all the buildings? Where the people forced to evacuate?Or was this town created by people who couldn't live anywhere else? Are these ramshackle buildings their permanent home or do they hope for something more. Combine the accessories and buildings to make your own shanty town:* Add fencing sections around a building.* Add metal panels to the walls.* Add and rotate the buildings.* Some buildings have separate parts which can be repositioned or hidden/ shown for more versatility.* Does not include a terrain or ground. We recommend using your own shader or texture on Poser`s Ground Plane. Product Features, Set 1:* Includes the following Poser figures: (obj, cr2/ png): - Shanty Building 01, at 3,304 polygons. Includes 2 ceiling sections, 3 front walls, 2 left walls, and front and rear walls as separate parts.- Shanty Building 02, at 630 polygons. Includes a table and 2 ceiling sections as separate parts.- Shanty Building 03, at 931 polygons. Includes a table, 2 ceiling sections, and all 4 walls as separate parts.- Shanty Building 04, at 725 polygons. Includes a porch, ceiling, and all 4 walls as separate parts. Hide/ Show Poses:* A set of hide/ show poses for the ceiling and walls for the buildings is included.- The buildings were designed so that the hide/ show poses will work on every model, provided the building has walls or a ceiling. Textures:* One set of texture maps with corresponding normal/ bump maps, at 2048x2048 pixels. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio; although DAZ Studio may import the files, we do not use DAZ Studio and can't support any issues that may occur. Original model by Arteria3D and uploaded for sale here with full permission.
Starship Bridge XI (for Poser): Introducing the next starship room for Poser: the Starship Bridge XI.This bridge comes from a line of ships with cleaner lines, reflective surfaces, and floor-to-ceiling glass displays.Unlike other bridges, this one uses an advanced glass-polymer display rather than a monitor/ viewscreen. Not to worry- the ship also comes with advanced shielding to keep the glass from breaking!Product Features:Includes two models:* Bridge IX interior: cr2/ png, at 151,812 polygons.* Hull exterior: cr2/ png, at 2,865 polygons.Moving Parts:* Like our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* The rear left and right doors (leading to the elevator lifts) can rotate open and close (with ERC dials on the BODY).- Both lifts have a detailed interior.* The two stand-up stations (to the right and left of the captain`s chair) can be hidden or shown to further customize your bridge.* The captain's chair can rotate (with an ERC dial on the BODY).* All of the crew chairs are separate body parts which can be re-positioned, rotated, or removed from the scene.- The tops of the chairs can rotate.* Four handle-throttles on the helm/ ops station can rotate.* Includes basic exterior hull section (with movable lasers) which can be seen when looking out the front window.Textures:* One set of textures is included* Uses texture maps, bump maps, and specular maps. No shaders nodes are used.* Templates are included, and some are color-coded for ease-of-use.* Although templates are included, we recommend using the includes textures as guidelines when making your own textures.Poses:* Normal/ Reset* Ambient Lighting (for Poser 9/ Poser Pro 2012 and above)* Red Alert: sets some lights to a reddish tintPoses:* Hide/ show each wall and the ceiling.* Hiding and showing the left lift hides and shows the left doors, and hiding and showing the right lift hides and shows the right doors.Cameras:* Fifteen camera files are included.* The camera files also hide any walls which may be blocking the camera.Scene File:* Includes the Starship Bridge XI in the center of the scene.* The light set in the included scene file has Ambient Occlusion enabled for the top light.-This will create additional detailing, but may increase render times.Recommended for use in Poser 5 and above, though the Ambient Occlusion lighting will only work in Poser 6 and above.People, clothing, and poses not included.Model and textures by Richard Duda, Poser conversion and rigging by John Hoagland.
Shark Starship (for Poser): Based on the various starship designs from Star Trek comes the "Shark". Perfect for use as an exploration or deep-space vessel.Model Features:* Includes one Poser figure (obj, cr2/ png) at 9,039 polygons.* There are no moving parts.* Textured with a full set of texture and specular maps.* Some materials include an ambient glow, such as the warp coils, bussard collectors, and the deflector dish.* Has not been tested in DAZ Studio, but it should load with minor texture adjustments.Originally from:Sketchup: obj version by Paul Smith, Poser conversion by JHoagland
Power Droid (for Poser): From the Star Wars wiki:Power droids were unsophisticated droids that acted as ambulatory batteries, recharging vehicles and machinery. They were equipped with a small, internal power generator, and several plug-in sockets.Although they were extremely important to both military and civilian life, power droids were so commonly encountered in the galaxy that they often went unnoticed. The GNK droid by Industrial Automaton and the EG-series droid by Veril Line Systems were popular power droids. Both were commonly referred to as "gonks," after the low honking sound they emitted.Features:* One Poser figure: obj, cr2/ png, with 20,069 polygons.* Scaled to the Poser people, roughly same size of the R2 Astromech Droid.* Moving parts:- Left and right legs, with an ERC dial on the Body.Textures:* One color scheme with texture maps.Model by Richard Duda, Poser clean-up and rigging by JHoagland.For use in Poser 6 and above, but should work fine in DAZ Studio with minor texture adjustments.
P.I.C.K. SciFi Pipes and Cables (for Poser): Expand the possibilities of the P.I.C.K. SciFi Base set with this fantastic expansion set.P.I.C.K. SciFi Pipes and Cables offers more modular components to help you create the indoor SciFi scene of your dreams!The components were modeled to seamlessly integrate with each other while giving the flexibility to create the SciFi scene YOU want. Modeled in exact scale with extreme accuracy in both models and textures PICK SciFi provides the "tools" needed to set up a realistic indoor SciFi scene within minutes. Whether you want a communications bridge, a corridor or a full space station or space ship interior PICK allows you to build the scene you have in mind rather then being stuck with a preset sets.Unleash your creative mind - thousands of potential combinations at your fingertips!.: Product Features :.30 Components (3D models - .PP2 and .OBJ formats)2 extra Base shaders (.MC6)Requires the previous purchase and installation of the P.I.C.K. (Poser Indoor Creation Kit) SciFi Base.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Melody (V4) (for Poser): She is your girl for portrait renders. She uses high resolution, detailed textures, providing a high level of realism in your renders.Her delicate smile makes her especially good for romantic renders and she also loves to play a fashion model..: Product Features :.* Full Body Inject and Remove poses* Head Inject and Remove poses* Skin MAT poses* 10 Eye Color MAT Poses* 10 Full Makeup MAT Poses3rd party products needed:Victoria 4.2 BaseVictoria 4.2 Morphs++V4 Elite Body ShapesClothing, hair, and poses not included.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Spider Tank (for Poser): This is a futuristic robot sentry.Armed with two cannons, this spider tank can dominate the battlefield... or when shrunk down, it can infiltrate enemy bases with ease.Product Features:* Poser figure: obj, cr2/ png, with 12,507 polygons.* Gun mount can rotate, with an ERC dial on the Body.* Left and right guns can elevate, with an ERC dial on the Body.* The front gun parts can move in and out to simulate a recoil-firing effect, with an ERC dial on the Body.* Rear hatches on the guns can open and close* All six legs with three sections each, are posable.* One texture map, at 4096x4096 pixels.Original model created by Moscowich80. Uploaded for sale here with her full permission.
Adienne (V4) (for Poser): Adienne is beautifully shaped woman with a little flirty nature - and yet she can easily transform into fairy or even dark character. Her subtle smile never tells everything...Created with realism in mind, she uses only high resolution textures which gives you great possibilities for rendering believable images. Her shiny eyes have reflections dependent on light direction, another way to achieve realism in your renders. Luscious lips colors and realistic eyes will provide you with great base for outstanding renders. You can easily transform Adienne into fantasy character with her fantasy eyes options, fantasy makeups and lips. Want her to be a subtle girl enjoying first spring rain? Natural eyes options and subtle makeups along with pastel lips colors will help you with this. .: Product Features :.* Body Morph INJ/REM* Head Morph INJ/REM* Skin Material* Skin Material with Pubic Hair* 10 Eye Colors (5 Fantasy and 5 Natural)* 7 Eye Lashes Options (3 Black and 4 Colored)* 10 Lips Colors* 10 Makeup OptionsEverything is designed to fit each other, of course you can mix and match for endless possibilities. Promo renders show Adienne's versatility so I'm sure you will find many renders in which she could shine!3rd party products needed:Victoria 4.2 BaseVictoria 4.2 Morphs++V4 Elite Body ShapesClothing, hair, and poses not included.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
The Operating Theatre (for Poser): So you can mix and match the objects in other scenes, this product also includes the following props:* Operating Table - with control panel and loads of switches and knobs.* Resuscitation Machine - A precisely designed version of the machine that goes "ping". With all the details found on a real resus machine, such as wires, cables and monitors. This comes in 2 versions, one with a fixed breathing tubes and one where you can add the breathing pipes for various figures.* Drips: 1 empty stand, 1 with IV antibiotics bag and coiled line, 1 with a monitor and 1 with a blood bag and modelled line angled so it can go into your character.* 2 Machines: 1 small generic hospital equipment, not sure what it does but it looks good and 1 instrument with coiled probey thing.* Weighing Scales: Check your characters have gone easy on the chocolate.* Defibrillator: Available here in 2 flavours, 1 standalone and 1 defib on a stand with the paddles outwards ready to zap your people back to life. Comes with a M3 pose.* 2 wheeled Trolleys - 1 with a big tray for putting the squishy bits in. Plus 1 with items such as pill bottles, box of gloves and storage boxes and trays.* Doctors desk with a chair: The desk has a computer, phone, clipboard with patient notes, picture frame, pen holder with pencils, pen and a paperwork holder containing sample jars and prescriptions.In addition to all of this, the product is presented in 3 forms:* One empty room so those artists who like to "scratch build" can build scenes by adding props to suit.* One preset with a wide variety of things as parented props for easy adjustment.* One complete model with lots of things in one single figure.Plus this set is carefully mapped so that you easily adjust the materials. For example replace the ceiling and operating theatre lights with a material that gives an ambient glow to light your scene. Or replace the silver material on some models with a Poser, DAZ Studio or Vue shader.Original model created by mrsparky and owned by Vanishing Point.
Cozy Restaurant for Poser: A cozy corner slice of a restaurant, perfect for romantic scenes.Includes 2 chairs, table, tablecloth, wine glasses, plates with napkins, and all of the silverware shown.Food and drink not included, but look for more from Vanishing Point very soon. Product Features:* Poser figure: obj, cr2/ png, with 356,464 polygons.* Includes the following separate parts, which can be repositioned or hidden/ shown:- Left and right chair- Table- Tablecloth- Two wine glasses- Two plates- Two napkin placeholders on the plates- Left and right silverware, including forks, knives, and spoons Textures:* One texture scheme.* The wine in the glasses is a separate material which can be made a different color or made transparent.* Some materials, such as glass and metal use Poser shaders. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Moriko (V4) (for Poser): High quality, versatile, realistic character for Victoria 4.2 morphs++.Subtle beauty, with oriental origins - here is Moriko. She comes quietly to brighten the day with her gentle smile and yet... hiding sadness and pain, she seeks for the answer where did she come from. Abandoned as a child, she only knows her mother was Japanese lady... perhaps geisha, but who knows? Moriko means in Japanese "forest child" and she is like a child of nature - quiet, to suddenly burst into laughter that can easily end up with crying. Peaceful, to suddenly feel anger inside, anger that would never let her find peace until she finds out what happened in her past. Moriko knows all shades of sadness and happiness. She is emotional and she knows that... and yet she can hide all her feelings behind geisha mask...Moriko is full character texture set with morphs for DAZ Victoria 4.2 morphs++. She comes with many texture options for varied effects. Choose from subtle colored eyes, luscious lips, different lashes options and makeups. Promo images show just a portion of what Moriko can be..: Product Features :.* Full body INJ/REM poses* Head INJ/REM poses* Skin default MAT poses* Arm tattoos MAT poses* 10 eye MAT poses* 4 lashes trans poses* 10 lip MAT poses, including one with no lipstick (natural)* 17 makeup MAT poses including 4 geisha makeups3rd party products needed:Victoria 4.2 BaseVictoria 4.2 Morphs++V4 Elite Body ShapesClothing, hair, and poses not included.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Casual Set 2 (M4) (for Poser): This set of super-cool, super-hip clothing for your Mike 4 characters is perfect for hanging out, relaxing, or just chilling with your bros. Includes multiple colors for the shirt and pants, so mix and match the colors for the ultimate cool look!Don't miss out on this season's trendiest fashions! Product Features:* Poser figures: obj, cr2/ png:* BBall Boots, at 32,048 polygons; no position morphs. * Shorts, at 12,224 polygons; includes the following position morphs:- Over Boxers- Taking off (lowers hip)- Realistic (crotch bulge) * VNeck Tee, at 20,464 polygons; includes the following position morphs:- Bigger V neck- Lift Up- Lift Up Front- Lift Up Left Side- Lift Up Right Side- Realistic (crotch bulge) on hip .: Textures / Material Files :.* One set of texture maps.* Includes the following materials:- Shorts: Brown- Shorts: Dark Brown- Shorts: Gold- Shorts: Hawaiian- VNeck Tee: Brown- VNeck Tee: Dark Brown- VNeck Tee: Gold- VNeck Tee: Green- VNeck Tee: Gray- VNeck Tee: J Poser Clothing Blue- VNeck Tee: J Poser Clothing Light Green- VNeck Tee: J Poser Clothing Dark Green- VNeck Tee: J Poser Clothing Yellow- VNeck Tee: J Poser Clothing White- VNeck Tee: PW Rocks- VNeck Tee: Arms Hide .: Morphs :.* Each clothing includes the usual shape morphs to fit your M4 character, where applicable. Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Office Cubicle (for Poser): The office cubicle or cubicle workstation is a partially enclosed workspace, separated from neighboring workspaces by partitions that are usually 5–6 feet (1.5–1.8 m) tall. Its purpose is to isolate office workers from the sights and noises of an open workspace, the theory being that this allows workers more privacy, and personalization, and helps them to concentrate without distractions.This office cubicle model includes 13 furniture objects, ranging from desks to walls to chairs to a desktop computer, and even a cup of pens. To help make your work scene look more realistic, five screen shots are included for the computer monitor: two graphics programs, a web browser, a spreadsheet, and some programming code.Product Features:Includes 13 models in Poser figure format (obj, cr2/ png):All of the furniture models (desks, cabinets, and walls) have been meticulously crafted so they easily fit together. This means that each object`s yTrans has already been set so the under desk cabinet is under the desks, the overhead cabinet is above the desk, and the telephone is on top of the desks. Presets:* "L" shaped* "U" shaped* Manager (with 2 visitor chairs)* Small deskAnd since each preset is made with the individual parts, it's very easy to hide any walls which might be blocking your camera.Textures/ MAT Poses:* 2 Cabinet colors* 2 Desk Plastic Colors* 5 Computer Screen designs* 2 Framed Picture 1 designs* 2 Framed Picture 2 designs* 3 Paper designs* 3 Pen and Pencil Cup designs* 5 fabric designs for the Wall 1 and 2Floor and exterior walls not included... but you can easily make your own:For the floor, simply recolor Poser`s ground plane.For the walls, use Poser`s flat plane prop rotated on edge.
Portuguese House Facade (for Poser): This is a facade of Portuguese style-house. Does not include sides or rear.Arrange 2 or 3 next to each other for a quick row of buildings or arrange 3 in a U-shape to make a courtyard. Product Features:* Poser figure: obj, cr2/ png, with 340,998 polygons.* Includes the following parts:- Base and wall.* The doors can not open. Includes two presets:- 3 in a row- U courtyard Textures:* One texture scheme.* Some materials, such as glass and metal use Poser shaders. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Abbey In Ruins: Construction Kit (for Poser): This is the inside of the ruined abbey. Rock columns are all that`s left of a once-thriving building. This set contains hallways, rooms, and doors for you to build your own internal corridors. Product Features:* Includes the following Poser figures: (obj, cr2/ png):- Door A: non-moving door and frame, at 31 polygons; no moving parts.- Door B: door with no frame, at 18 polygons; no moving parts.- Door Connector, at 125 polygons. Includes an opening and closing door.- Door Frame, at 40 polygons; no moving parts.- Junction, at 864 polygons; no moving parts.- Room A, at 38 polygons. Includes a ceiling and all 4 walls as separate parts.- Temple Piece A: short straight hallway, at 800 polygons. Includes a ceiling and left and right walls as separate parts.- Temple Piece B: `s` angled to the left hallway, at 814 polygons. Includes a ceiling and left and right walls as separate parts.- Temple Piece C: `s` angled to the right hallway, at 815 polygons. Includes a ceiling and left and right walls as separate parts.- Temple Piece D: longer straight hallway with a grate on the side, at 898 polygons. Includes a ceiling and left and right walls as separate parts. Hide/ Show Poses:* A set of hide/ show poses for the ceiling and walls for the buildings is included.- The buildings were designed so that the hide/ show poses will work on every model, provided the building has walls or a ceiling. Textures:* One set of texture maps, at 4096x4096 pixels with corresponding normal/ bump maps. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio. Original model by Arteria3D and uploaded for sale here with full permission.
Sci-Fi Marine (M4) (for Poser): Armor up and move out!Made from a combination plasti-steel weave and insectoid technology, this armor is lightweight yet is rated to withstand up to class 7 blaster fire. Perfect for sci-fi or futuristic military scenes, whether your character is invading a planet or saving the galaxy from aliens. Product Features:* Includes the following conforming Poser figures: (obj, cr2/ png):Boots, at 25,392 polygons.Chest Armour, at 26,212 polygons.Leg Armour, at 6,808 polygons. * Includes the following parented props: (obj, pp2/ png):Arm Armour Left, at 3,404 polygons.Arm Armour Right, at 3,404 polygons.Hand Armour Left, at 4,466 polygons.Hand Armour Right, at 4,466 polygons.Helmet, at 8,552 polygons.- The visor is a separate material that can be set to varying levels of transparency.Shoulder Armour Left, at 6,884 polygons.Shoulder Armour Right, at 6,884 polygons.Wrist Armour Left, at 3,404 polygons.Wrist Armour Right, at 3,404 polygons. Each armor piece is a separate figure, which makes it easy to add or remove pieces that you need. Morphs:* Includes the usual morphs to fit your M4 character Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ.Since this is full-body clothing, you shouldn't need morphs on M4. Textures:* One set of texture maps, at 2048x2048 pixels with corresponding normal/ bump maps.* Includes one "body suit" texture and material collection file for M4 to match the armor. This product is designed for use in Poser 5 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Crichton (for Poser): On the TV series, Buck Rogers in the 2th Century, Crichton was a robot built by Dr. Goodfellow to help humans on board the spaceship "The Searcher" (in the second season of the series)From the "Buck Rogers Wikia": Crichton has a quite abrupt manner, as demonstrated by his refusal to accept that he was created by a human. Model Features:* Includes one Poser figure (obj, cr2/ png) at 2,871 polygons with the following rigged parts:- Left and right fingers can rotate.- Left and right arms can rotate.- Left and right shoulders can bend.- Left and right collars can rotate.- Neck sections can be raised and lowered (with an ERC dial on the Body).- Head can rotate and tilt.* Textured with a shiny gray metallic shader and no textures are needed.Originally from:Sketchup: obj version by Paul Smith, rigged by JHoagland
Kylo Ren Helmet (M4): Kylo Ren`s helmet from Star Wars: The Force Awakens for use with M4.Includes two pieces parented to M4`s head:* Front face plate, at 151,122 polygons.* Rear helmet, at 28,848 polygons.Created and tested in Poser; has not been tested in DAZ Studio (but should probably work fine).Model by Richard Duda, clean-up by JHoagland.
Middle East Market (for Poser): In the middle of the desert sits this outpost. Who created it? What kind of activity goes on here? Will we see good being traded and people sent on their way on camels? Or will something more sinister occur here?A semi-circle of buildings surrounds an inner market with stall and wagons where merchants display their goods- some out in the open and some under the cover of tents. Product Features:* One Poser figure: obj, cr2/ png, at 90,524 polygons.* All of the parts can be rotated, repositioned, or hidden/ shown from the scene. Camera Files:* Includes 12 camera presets for easier movement around the buildings.* Use these files to render your own scenes or use them as a starting point. Textures:* One set of texture and corresponding bump maps, ranging from 512x512 to 1024x1024.* Does not use Poser`s shader nodes. All images rendered in Poser Pro 2012 with the included camera angles. This product is designed for use in Poser 5 and above.
Starship Engineering Room 3 (for Poser): Introducing the next starship room for Poser: the Engineering Room 3. This room is a more advanced engineering room for a more advanced starship. The two-story design allows the various ship functions to be monitored from the side stations, side rooms, or even from the stations on the second level. A side ladder and lift allows the crew to access the upper levels.Four chairs allow the crew members to sit at the side stations while doing their work. Product Features:* Includes two Poser figures (obj, cr2/ png):- Engineering Room 3, at 92,940 polygons- Chair, at 13,506 polygons Moving Parts:* Engineering Room 3:- The front two doors can open and close, with an ERC dial on the Body.- The left front two doors can open and close, with an ERC dial on the Body.- Both sets of rear doors can open and close, with an ERC dial on the Body.- The right front two doors can open and close, with an ERC dial on the Body.- The side left and right doors can not open and close.- The lift can move up and down, with an ERC dial on the Body.- The upper stations can be hidden or shown for more customization. * Chair:- Top can raise up and down, with an ERC dial on the Body.- Top can rotate separate from the base, with an ERC dial on the Body. Poses:* 72 Hide/ show poses:- Hide/ show all walls (separately), which also hides any doors connected to the walls.- Hide/ show all the ceilings (separately).- Hide/ show the right and left stations. Cameras:* 14 camera files are included.* The camera files also hide any walls which may be blocking the camera.* All of the sales images were created using the included camera files. Textures:* One set of textures is included.* This model uses Poser`s FBM shader node for additional detailing.* Templates are included. Recommended for use in Poser 5 and above, has not been tested in DAZ Studio.
Meditation Chamber (for Poser): This inner sanctum is a meditation chamber for your characters to find solitude and isolation from their duly duties. This set includes 3 areas:* The inner chamber includes an opening top, which reveals plenty of display screens to monitor any needed functions.* The outer chamber room includes holographic projectors for communications. A stand is included so your character doesn't step on the floor and interfere with the holographic communications.* The exterior hallway includes 3 blast doors which can be sealed for extra privacy as well as two airlock-style doors between the room and the hallway. Product Features:* Includes one Poser figure (obj, cr2/ png), at 188,729 polygons. Moving Parts:* Like our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* The chamber top can open (up and down), with an ERC dial on the Body.* The chamber chair can rotate around, with an ERC dial on the Body.* All three blast doors can open and close (up and down), with ERC dials on the Body.* Two doors at the end of the hallway can open and close (left to right), with ERC dials on the Body.* The circular stand is a separate body part which can be repositioned or hidden from the scene.* The chamber bottom is a separate body part which can be repositioned or hidden from the scene.* Hide/ show poses are included to hide and show the walls. Textures:* One set of textures is included.* This model uses Poser`s shader nodes for some materials.* The walls, pipes, and wall pads are separate materials, which allow for further customizing.* Templates are included. Poses:* Hide/ show each wall and the ceiling.* Hide/ show the inner chamber.* Hide/ show the hallway (and doors).* Hide/ show the stand. Cameras:* Nine camera files are included.* The camera files also hide any walls which may be blocking the camera.* All of the sales images were created using the included camera files. Recommended for use in Poser 5 and above.
TT8 (for Poser): Do you want to have more time for the fun stuff in life like waterboarding illegal Venusians?Then outsource your evilness with the TT8, your despotic droid. Created by SparkyTron Industries this sphere of sleeze comes with loads of useful features, including...The Back Hander. Be it any major credit/debit card or plain hard cash, this unit allows you receive bribes quickly and quietly.The Brick laying Module, perfect for building wall and comes with a contactless "bill the neighbours" payment module.The Grabbber. For when you need to show them who`s the daddy.Da Bomb. Temper Tantrum not having a effect? Can`t get your own way? Then just nuke `em.Please note: The TT8 is a bit like a Dalek, it doesn`t like stairs and the production model ships with smaller hands.Best of all this Poser version comes complete with a jerking action, just like the real thing!Model Features:* Poser figure: obj, cr2/ png, with 92,356 polygons.* Tons of moving parts! Original model by mrsparky and sold here with permission.
First Order Stormtrooper Armor (V4): The First Order Stormtrooper Armor from Star Wars: The Force Awakens for use with V4.Includes the following parented props:* Full body armor, 15 separate pieces, for a total of 50,052 polygons.* Helmet, at 3,283 polygons.* Blaster rifle, at 40,337 polygons; includes 2 versions:- Parented to the right hand, so your character can hold the gun.- Not parented, so you can have extra guns in the scene.* Does not include boots.Two material collection files for the armor and helmet:* White* Black/ "Chrome Trooper"* One material collection file to turn your V4 character`s body parts black.- You could also use a body suit instead of re-coloring your V4 charactersCreated and tested in Poser; has not been tested in DAZ Studio (but should probably work fine).Model by Richard Duda, clean-up by JHoagland.Images rendered in Poser Pro 2012 with Indirect Lighting (IDL).
Shanty Town 2: Large Compound (for Poser): This is a large compound with two buildings surrounded by fence sections. Great for use as a headquarters, base, or just a place to hole up for a few weeks or months.Works great with the other Shanty Town 2 buildings or add some debris from the Shanty Town 1 Accessories set. Product Features:* Poser figure (obj, cr2/ png), at 1,679 polygons.* Includes separate parts which can be hidden, shown, or repositioned to further customize your scene:- 2 Buildings- 12 Fence Sections- 1 Column- 1 Stairs* As a low polygon model, you can duplicate this model multiple times to create a city without overwhelming your system. Textures:* One set of texture maps, at 4096x4096 pixels with corresponding normal/ bump maps.The large texture size makes it perfect for close-up and medium range shots. Cameras:* 12 camera files are included.(Unlike our other sets, none of walls will block a camera, so no hide/ show poses are needed.) All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 5 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Starship Bridge Yamato (for Poser): Designed for a vessel on an exploration mission to the stars, this bridge has more open spaces and stand-up consoles.The captain sits directly behind the helm and ops console. The chairs next to the captain can be used by the first officer, medical officer, or a mission specialist. The consoles between the officers can be configured for any mission or ship specification. Two stand-up stations on the right and left offer additional scanning and readouts for the crew. The rear and side monitors can be reconfigured to display any of the ship`s functions, including science, engineering, communication, or tactical. Product Features:* Poser figure (obj, cr2/ png), with 120,585 polygons! Moving Parts:* As is usual for our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* The helm and ops chairs can rotate around (with an ERC dial on the BODY)* The helm and ops consoles can swing around for easier access to the chairs (with and ERC dial on the BODY).* The side controls next to captain's chair have monitors which can be rotated.* ALL of the doors can open and close (with an ERC dial on the BODY).Although all of the doors can open, there are no corridors behind the doors. We recommend using one of the many corridor sets, for sale here, for background hallways. Textures:* One set of textures is included.* Some materials (such as the walls) use Poser's shader nodes (such as FBM and Noise).* Templates are included. Poses:* Hide/ show each wall and the ceiling.* Hide/ show the left and right stand-up stations.* Hiding and showing the left alcoves hides and shows the left doors, hiding the right alcoves hides and shows the right doors. Cameras:* Fourteen camera files are included.* The camera files also hide any walls which may be blocking the camera. For use in Poser 5 and above. Optimized for Poser 9 and above: all of the "light" surfaces have their Ambient Values set to cast light AND all of the textures have their texture filtering already set so the monitor displays look sharp. The promotional images were made in Poser Pro 2012 and the illumination in the scene is created with the "lights" material and InDirect Lighting (IDL).
Grumman F4F 4 Wildcat (for Poser): The Grumman F4F Wildcat was an American carrier-based fighter that began service with both the United States Navy and the Fleet Air Arm in 1940. Although first used in combat by the British in Europe, the Wildcat would become the primary carrier fighter for the first year and a half of the United States Navy`s involvement in World War II in the Pacific Theater. The FM Wildcat, an improved version built by General Motors, remained in service throughout the remainder of the war on escort carriers, where larger and heavier fighters could not be used. In all, 7,860 Wildcats were built. During the course of the war, Navy and Marine F4Fs and FMs flew 15,553 combat sorties (14,027 of these from aircraft carriers), destroying 1,327 enemy aircraft at a cost of 191 Wildcats, an overall kill-to-loss ratio of 6.9:1. Product Features:Highly detailed, textured model scaled to Poser figures. On the Body tab are dials to control:* PropBlur - activates the propeller blurring* Propeller - rotates the propeller* SlideCanopy - slides the cockpit canopy open* LandingGear - one dial controls all 12 the moving parts to retract the landing gear* RotateWheels - rotates all three wheels in unison* Rudder - moves the rudder left and right* TailFlaps - moves the tail flaps up and down* WingFlaps - controls the movement of the wing flaps* DropTanks - drops the extra fuel tanks from the wings. The can also be made invisible.* TurnTailWheel - turns the tail wheel for ground taxi movements The joystick can also be animated by selecting its tab for controls. The model uses diffuse, bump and procedural materials. Original model by Digimation Model Bank, sold here with full permission.
Middle Ages Buildings Set 2 (for Poser): Straight from the middle-ages comes another set of medieval-themed models.Build fantasy scenes or historic towns with these buildings, accessories, and castle. Also includes stocks for punishing any criminals or to warn people about the punishment. And these work great with our other medieval buildings. Product Features:* Set 2 includes the following Poser figures: (obj, cr2/ png):- Building 4, with 2,822 polygons; includes a door that can open and close, 2 sets of shutters that can open and close, and an empty interior that can be seen through the doorway.- Building 5, with 1,060 polygons; no moving parts and includes a basic interior that can be seen through the doorway.- Building 6, with 1,765 polygons; no moving parts and includes a basic interior that can be seen through the doorway.- Cart 2, with 760 polygons; includes wheels that can rotate.- Church, with 9,584 polygons; no moving parts.- Stocks, with 405 polygons; top stock can move up and down. Textures:* One set of texture maps, at 2048x2048 pixels with corresponding normal/ bump maps. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
HMCS Snowberry Add-On: Includes Smart-parented Low-poly Dummy Deck Crew (non-pose-able and smart-parented to the HMCS Snowberry figure), and Flag props for use with my HMCS Snowberry.
Avenger Bridge (for Poser): The bridge was designed as an extension of the Bridge XI layout, but with more advanced features.This version includes an below-lit glass floor, physical control buttons (including flight sticks), and a holographic display for the main viewscreen. Two sets of doors at the rear of the bridge lead to elevator lifts. Product Features:* Poser figure file (obj, cr2/ png), with 198,134 polygons.* Highly-detailed control surfaces with modelled dials, levels, and buttons.* All of the chairs are separate parts which can be rotated or repositioned in the scene.* The captain's chair can not rotate.* The left and right stand-up stations can be hidden or shown to further customize your scene.* The left and right columns can also be hidden or shown.* All of the walls can be hidden or shown to suit the needs of your scene.* The left and right rear doors can open and close with Pose Controls dials on the Body.- The lift interiors can be seen when the doors are opened. Textures:* Multiple "Light" materials for more customization.* One texture scheme with texture, bump, and transparency maps. Hide/ Show Presets:* Hide/ show each wall, the columns, and the ceiling.- Hiding and showing the rear alcoves hides and shows the corresponding doors. Cameras:* Twenty camera files are included.* The camera files also hide any walls which may be blocking the camera.- You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software.
Race Queen (V4) (for Poser): This is an outfit of a typical race queen, which is the term used to describe a female model used during the promotion of games, car races, or at auto shows. Product Features:* Poser figures: obj, cr2/ png:* CropTop, at 6,992 polygons* Jacket, at 15,912 polygons; includes the following position morphs:- OpenLeft- OpenRight* Skirt, at 6,400 polygons; includes the following position morphs:- Shorten- Also includes handles to adjust the skirt* Shoes, at 14,206 polygons Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Textures / Material Files:* Includes two texture schemes/ materials for each clothing:- Pink and Blue- Red and white (default) Morphs:* Each clothing includes the usual shape morphs to fit your V4 character, where applicable. Requires the previous download and installation of Victoria 4 (V4) and Vicky 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Solinoid Quilarion (for Poser): Second only to the Arcuilaria Hive Carrier, the Quilarion Battleship (Codenamed Nymph by UN Forces) is a massive vessel with incredible destructive power. Armed with numerous Beam Cannons, Tri-barreled Laser weapons, and a massive Focused Beam Array weapon, the Quilarion can deliver unparallelled destruction to its target. Like the Acuilaria, the Quilarion is home to a Solinoid Hive Queen and her swarms. The Hive Queen has her own separate nest atop the hull of the vessel in a bridge-like structure, and the hull houses swarms of Solinoid Worker Drones, advance bio-engineered Human-oid Clones, and egg chambers. The Quilarion Class acts as the main fire-power of the Solinoid Fleet, and is second only to the Hive Carrier in destructive power. It is a command ship in its own right and is never found without a small fleet of supporting ships in its wake. The Hive Battleship can usually be found in the company of the Arcuilaria Hive Carriers, but has also been observed operating with smaller Battlegroups of Solinoid Cruiser types and Scouts. The UN Military has counted dozens of the class in the Solinoid Main Fleet, among hundreds of smaller Vessels. It is feared that even larger vessels may remain out of sight beyond the edges of our solar system. Here are some of the highlights:* Over 100 Points of Articulation on the main figure!* Over 70 individually pose-able Weapons Turrets that can be trained and elevated independently.* Working Main Cannon, Beam and Tri-barrel Turrets.* Detailed Interior for the Command Bridge.* Pose presets are included to adjust the scale to life-sized and back to the default 1/10th scale to allow users to scale the carrier to match the scale of my the Variable Geometry Fighters. Original model by, and acquired, from Chris Schell, and now owned by VanishingPoint.
O`Bannon Bridge (for Poser): This is a smaller, more military command center, designed with a metallic blue and gray color scheme.Unlike the other ships, the front helm and op stations face diagonally forward for a more efficient console layout.The rear stations can be re-configured for tactical, communications, security, or anything else as needed for the mission. Product Features:* Includes one Poser figure (obj, cr2/ png), at 116,305 polygons. Features:* Like our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* The captain chair can rotate, with an ERC dial on the Body.* All 4 of the crew chairs can rotate and be repositioned.* The left and right lift doors can open and close, with an ERC dial on the Body.* The left and right levers can can move, with an ERC dial on the Body* The left and right stations can be be repositioned or hidden/ shown to suit the needs of your scene.* The left and right railing can be hidden/ shown.* Includes an exterior (with basic textures) for shots through the front window. Textures:* One set of textures is included.* This model uses Poser`s shader nodes for some materials.* All of the monitor screens use their own texture map, which makes it easy to change the screens and customize the room to suit the needs of your scene.* The front window is also mapped "maximized" so you can add your own monitor display if needed. Poses:* Hide/ show each wall, the left and right lifts, the exterior, and the ceiling.* Hiding and showing the left lift hides and shows the left door, hiding the right lift hides and shows the right door. Cameras:* Thirteen camera files are included.* The camera files also hide any walls which may be blocking the camera.* All of the sales images were created using the included camera files. For use in Poser 6 and above; may not work properly in DAZ Studio.All sales images rendered in Poser Pro using a combination of lights and Indirect Lighting (IDL).
Shanty Town Buildings 1: Set 3 (for Poser): This town has seen better days. What happened here? Did a storm come through the area and destroy all the buildings? Where the people forced to evacuate?Or was this town created by people who couldn't live anywhere else? Are these ramshackle buildings their permanent home or do they hope for something more. Combine the accessories and buildings to make your own shanty town:* Add fencing sections around a building.* Add metal panels to the walls.* Add and rotate the buildings.* Some buildings have separate parts which can be repositioned or hidden/ shown for more versatility.* Does not include a terrain or ground. We recommend using your own shader or texture on Poser`s Ground Plane. Product Features, Set 3:* Includes the following Poser figures: (obj, cr2/ png): - Shanty Building 09, at 985 polygons. Includes the tire and pipe (on the roof) as separate parts.- Shanty Building 10, at 1,552 polygons. Includes a ceiling and all 4 walls as separate parts.- Shanty Building 11, at 857 polygons. Includes the ceiling, an inner wall, and all 4 exterior walls as separate parts.- Shanty Building 12, at 659 polygons; no moving parts. Hide/ Show Poses:* A set of hide/ show poses for the ceiling and walls for the buildings is included.- The buildings were designed so that the hide/ show poses will work on every model, provided the building has walls or a ceiling. Textures:* One set of texture maps with corresponding normal/ bump maps, at 2048x2048 pixels. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio; although DAZ Studio may import the files, we do not use DAZ Studio and can't support any issues that may occur. Original model by Arteria3D and uploaded for sale here with full permission.
Imperial Throne Room (for Poser): As the galactic government fractured, the imperial leader found he needed to distance himself from the commoners. To that end, he build his imperial throne room in a tower high about the capitol city.The only way to gain an audience with the leader is via the one entrance: the elevator lift in the middle of the room. That is, when the imperial leader chooses to see you. The upper-floor catwalk hides guards and security cameras. Product Features:* Poser figure file (obj, cr2/ png), with 110,584 polygons.* Chair can rotate, with a Pose Control dial on the Body.* Lift door can open to the left and right, with a Pose Control dial on the Body.* All of the walls and ceiling can be hidden or shown.* The upper floor can be hidden or shown. Textures:* One set of texture maps. Hide/ Show Presets:* Hide/ show each wall, the ceiling, and the upper floor. Cameras:* Fourteen camera files are included.* The camera files are carefully positioned so there are no walls blocking the camera.- You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. The starfield background shown behind the room is included.Instructions on how to use it as a background image are included in the readme file. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above.
Victorian Thug (M4) (for Poser): A Victorian-era enforcer.This guy could be a brawler, a bouncer, or just a trouble-maker... or is he the lovable scoundrel hero? Product Features:* Includes the following conforming Poser figures: (obj, cr2/ png):- Belt, at 3,304 polygons.- Boots, at 1,518 polygons- Hat, at 589 polygons.- Holster Left, at 222 polygons.- Holster Right, at 222 polygons.- Scarf, at 2,249 polygons.- Shirt, at 1,665 polygons.- Trousers, at 1,506 polygons.- Waistcoat, at 1,563 polygons. Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Poses:* Hide/ show M4's body parts Morphs:* Includes the usual morphs to fit your M4 character. The hat and holsters don't have any shape morphs because M4's head doesn't have any shape morphs. Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. Textures:* One set of texture maps with corresponding normal/ bump maps for all the clothing, at 2048x2048 pixels. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
USS Nevada Add-on Set 1: Includes Smart-parented Flag, Tropical Covers, and Low-poly Dummy Deck Crew (Smart-parented and non-pose-able) props for use with my USS Nevada Model. These items are Smart-parented the the Nevada and will automatically load, parented in place, on the figure! Requires the previous purchase and installation of the USS Nevada for Poser.
Nevada Alternate Textures Set: Includes textures to represent both Nevada Class Battleships, the USS Nevada and USS Oklahoma, as they appeared at Pearl Harbour on December 7th, 1941. The set includes MAT Poses in pz2 format for ease of use! Requires the previous purchase and installation of the USS Nevada for Poser.
USS Tennessee BB-43 (for Poser): USS Tennessee (BB-43), the lead ship of her class of battleship, was the third ship of the United States Navy named in honor of the 16th US state. During World War II in the Pacific Theater, she was damaged during the attack on Pearl Harbor in December 1941. On the morning of 7 December 1941, Tennessee was moored starboard side to a pair of masonry "mooring quays" on Battleship Row, the name given to a line of deep water berths located along the southeast side of Ford Island, Pearl Harbor. Included are the main USS Tennessee figure, 3 smart-propped versions of the Anchors (all anchors up, single anchor lowered, and all anchors lowered), and 2 smart-propped O3U Corsair Float-planes. Optionally the Anchors may be left out for replacement by other props (such as the available “easy pose” chains and extra items of that nature available from many sources) as can the Aircraft... Pose-able features (some 70 moving parts in total) include: working Rudder and Propellers, Main and Secondary Gun Turrets that can rotate with Barrels that can elevate independently, working Cargo Cranes, functioning Spot-lights and Gun Directors, and pose-able Aircraft Catapults and Crane. As an extra option you can replace the low poly Float-planes with a fully pose-able version of the O3U Corsair Scout also available in my product catalog! Original model by Chris Schell and uploaded for sale here with permission. For use in Poser 6 and above.
Medieval Ruins Set 1 (for Poser): A set of medieval-style ruins. What`s in these castle ruins or the wrecked doorways or the destroyed walls? It`s up to you!Also works great for military scenes. Product Features:* Set 1: 9 Poser figures: obj, cr2/ png:Medieval Ruin 01 HR1, with 10,944 polygons; no moving parts.Medieval Ruin 01 SP1, with 72,741 polygons; no moving parts.Medieval Ruin 01 SP4, with 27,046 polygons; no moving parts.Medieval Ruin 01 SP5, with 23,691 polygons; no moving parts.Medieval Ruin 02 R1, with 9,184 polygons; includes a separate ruins section which can be hidden/ shown or repositioned in the scene.Medieval Ruin 02 R5, with 11,986 polygons; no moving parts.Medieval Ruin 02 R6, with 14,852 polygons; no moving parts.Medieval Ruin 02 R8, with 14,510 polygons; includes a separate ruins section which can be hidden/ shown or repositioned in the scene.Medieval Ruin 08 DB3, with 10,840 polygons; no moving parts. Textures:* One set of texture maps for each model, with corresponding normal/ bump maps, at 1024x1024 pixels. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software.
Desert Outpost (for Poser): Is this a long-abandoned outpost on the edge of the desert? Or is this a new settlement, waiting to trade with neighboring tribes?Includes 12 buildings, 15 palm trees, 4 jars, 2 carts, and many more options.Product Features:* One Poser figure: obj, cr2/ png, at 39,927 polygons.Includes tons of separate parts, all of which can be repositioned or hidden from the scene:* Use the Hierarchy Editor to hide and show these parts to further customize your scene.* Parts are parented to each dirt pile, which can be positioned anywhere in the scene.Camera Files:* Includes 12 camera presets for easier movement around the buildings.Use these files to render your own scenes or use them as a starting point.Textures:* One set of texture and corresponding bump maps, ranging from 512x512 to 1024x1024.
Solinoid Weapons (for Poser): The Solinoid Fighters are capable of mounting various missile-type and beam-type weapons. This set gives the Mogwai and Mogwai-Esu extended weapons capability with the addition of various mix-and-match add-on armaments. Here are some of the highlights3 sets of weapons that will conform to both the Solinoid Mogwai, and Mogwai-Esu (Ace) Fighters* Separate Conforming Figure Weapons and Ordinance, with fully controllable ordinance deployment. (Some sold as separate packs)* Numerous Independent ERC controls on the weapons figures for complete control of most vital functions from 1 location.* ERC weapons controls for launching and steer-able missiles and ordinance.Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
USS Vestal Add-On Set: Includes Smart-parented Tropical Covers, Low-poly Dummy Deck Crew (smart-parented and non-pose-able), and Flag. These items are smart-parented to the USS Vestal and will load automatically parented in place on the ship. Requires the previous purchase and installation of the USS Vestal for Poser.
Future Time Court Room (for Poser): Set in the future, this courtroom finds defendants guilty in front of a group of their peers... though their `peers` are often encouraged to jeer and heckle the defendants. The judge sits on the hovering chair at the rear of the room, the better to float above the room and hecklers. There are no doors and no windows, which means the only way in or out is the main teleporter in the middle of the room.Plead your case and you'll get beamed home... lose your case and get beamed to prison! Product Features:* Poser figure file (obj, cr2/ png), with 33,312 polygons.* The chair is a separate part which can be hidden or shown or repositioned in the scene.* All of the walls, columns, left and right seats, and the center pad can be hidden or shown to suit the needs of your scene. Textures:* One color scheme, which includes texture maps and Poser shaders. Poses:* Hide/ show poses for each wall and the ceiling, both columns, both seats, and the center pad. Cameras:* Eight camera files are included.* The camera files also hide any walls which may be blocking the camera.You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. This product is meant for use in Poser 6 and above and may not work correctly in other software programs. All images rendered in Poser Pro using a combination of lights and Indirect Lighting (IDL) using the included camera presets.
Peregrine Spacecraft (for Poser): From the a far-off future (or a far away past) comes this sci-fi spaceship. Smaller than a typical starship, but larger than a shuttlecraft, this ship can do it all, from hauling cargo or escorting an ambassador with stolen information. But don`t think this ship is a push-over- this ship comes ready for battle! Three laser banks are mounted on the top and bottom of the hull, each of which are computer-controlled to hit any target within range. The hyperdrive/ warp propulsion system makes this ship the fastest piece of hardware in the galaxy. Just be sure to obey all speed limits in whichever galaxy you visit. Product Features:* Poser figure: obj, cr2/ png, with 98,549 polygons.* Landing gear can move and down, with an ERC dial on the Body.* Front ramp can open and close, with an ERC dial on the Body.* Rear lift can open and close, with an ERC dial on the Body.* The stand on the lift can be repositioned or hidden/ shown to suit the needs of your scene.* The right and left chairs in the cockpit can rotate, with ERC dials on the Body.* The captain's chair can rotate, with ERC dials on the Body.* The doors behind the cockpit do not open and there is no hallway behind the doors. Two interior sections are included:* A cockpit which be seen through the windows* A small hallway behind the front ramp. Textures:* One set of texture maps; some materials include bump maps.* The rest of the materials use Poser shaders, such as fabric, reflection, etc. Note: this model is designed for exterior shots and some textures may look pixellated when viewed up-close. This product is designed for use in Poser 6 and above.
AH-1 Cobra Helicopter (for Poser): The Bell AH-1 Cobra is an attack helicopter. It shares a common engine, transmission and rotor system with the older UH-1 "Huey". It is variously called the "HueyCobra," "SeaCobra," "SuperCobra," "Whiskey Cobra," "Zulu Cobra," "Viper," or "Snake"; depending on the model.The AH-1 was once the backbone of the United States Army's attack helicopter fleet, but has been replaced by the AH-64 Apache in Army service. In March, 1999, the last AH-1 Cobras were retired from active duty from the US Army. Upgraded versions continue to fly with the United States Marine Corps (AH-1W) and several other users.Product Features:* Poser figure file (obj, cr2, png).* Super-detailed, at over 220,000 polygons... even includes modelled rivets on the hull!* Detailed cockpit instrumentation panels.* Upper rotor and blades can rotate around (with an ERC dial on the BODY).* Upper blades can flex up and down (with and ERC dial on the BODY) to simulate drooping blades when the helicopter has landed.* Rear blades can rotate around (with an ERC dial on the BODY).* All four canopy doors (two on the right and two on the left) can open and close (with an ERC dial on the BODY for each door).* Front and rear joysticks can move front/ back and left/ right.* Front gun turret can rotate.* Machine gun barrel can spin around for accurate gun-firing animation.* Blade Blur prop included to simulate the spinning of the blades.-The Blade Blur "props" are parts of the model instead of separate obj and prop files.-Hide/ show poses for the upper blades and rear blades are included.* The right and left weapons pods (two on each side) can be hidden or shown to suit the needs of your scene.-The Trans dials have been enabled so you can make scenes of personnel loading the weapons onto the helicopter.Textures:* Texture sets includes texture maps, bump maps, and specular maps. The specular maps add "streaks" to the model.* Uses Poser shader nodes (noise, fBm) for extra detailing, which may not render correctly in other software programs* Templates are not included due to the complex mapping of the model.* The Blade Blur props are mapped the same as the other Vanishing Point helicopters.* MAT Poses:-Green-Green No Mouth: the green coloring, but without the mouth and teeth-Brown-Brown No Mouth: the brown coloring, but without the mouth and teethFor use in Poser 6 and above.Original model created by Digimation. Uploaded for sale here with their full permission.
Warehouse Bedroom (for Poser): A bedroom set in a warehouse style building. Sure, the brick walls may be unfinished, but it comes furnished with a bookshelf and a painting as decorations.Other decorations include 4 plants, a table, and chair.But who left the crumpled clothing on the floor? Product Features:* Poser figure: obj, cr2/ png, with 186,136 polygons.* Includes the following parts which can be hidden/ shown or repositioned:- Bed- 2 Blinds, with a Pose Control dial to raise and lower them- Chair- 2 Clothing piles- Lamp- Painting- 4 Pillows- 4 Plants- Shelf- Table* Includes the following parts which can be hidden/ shown:- Backdrop- Bed frame- Bed netting- Ceiling- Rear and right walls- Quilt Textures:* One texture scheme.* Some materials, such as glass and metal use Poser shaders. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
UNS Coral Sea Space Carrier (for Poser): Knowing that the Solinoid fleet would eventually arrive, the UN Military began design studies to incorporate reverse engineered Solinoid technology into various vehicles and vessels. At first, the reverse engineered parts were too large to be fitted into smaller vehicles like aircraft, and required too much power to operate. It was necessary to fit the tech to larger vessels. Experiments were conducted on various decommissioned Naval vessels to find the best way to design and incorporate the new technologies. Here are some of the highlights:* Over 100 Points of Articulation on the main figure!* Over 50 individually pose-able Weapons Turrets that can be trained and elevated independently.* Working Aircraft Elevators, Hangar Bay Doors, Jet Blast Deflectors, Rudders, Weapons Mounts and Hangar Gantry Cranes with pose-able Hoist Hooks.* Detailed Interiors for the Forward and Rear Hangar Decks, and the Command Bridge.* Pose presets to adjust the scale to Life-sized and back to the Default 1/10th scale to allow users to scale the carrier to match the life-sized scale of my transforming Variable Geometry Fighters.* Includes cr2's to load both the UNS Coral Sea, and her sister ship the UNS Midway. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Aircraft Tug (for Poser): The tug has a fully detailed drivers position, undercarriage, and engine compartment. The wheels can be turned and rotated, the hood opens, and the tow bar can be posed as well. Included: Obj. for the Tug, Cr2, and textures for the model, plus a texture template to create your own paint schemes. Original model by Chris Schell and uploaded here with permission.
Red Queen (V4) (for Poser): A costume for a queen in a far-away galaxy. Is she good or evil? You decide! Product Features:* Poser figures: obj, cr2/ png:- Boots, at 23,566 polygons.- Choker, at 8,508 polygons.- Crown, at 7,393 polygons.- Skirt, at 26,521 polygons.-- Includes "handles" to change the shape and direction of the skirts.- Sleeves, at 17,336 polygons.- Top, at 7,739 polygons. Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Also includes a "HighHeelShoes" pose for V4's feet so they'll fit in the high-heel boots. Textures/ Material Files:* One set of texture, specular, and normal bump maps, at 2048x2048 pixels.* Skirt transparency material files:- Reset/ skirt show- 50% transparent- 100% transparent/ skirt hide- These can be applied to any of the skirt materials.* Includes material collection files for BOTH Firefly and Superfly. * All clothing files include the usual morphs to fit your V4 character Requires the previous download and installation of Victoria 4 (V4) from DAZ. For use in Poser 6 and above: uses Superfly materials and weight maps. Original design commissioned from cathrine6mirror.Clothing models created by and commissioned from dodger.
PT Cruiser (for Poser): The Chrysler PT Cruiser is a retro styled compact automobile launched by Chrysler as a 5-door hatchback in early 2000 (for the 2001 model year) and as a 2-door convertible in early 2005 (added to the 2005 model lineup).Bonus: This product includes position poses for Aiko 4, Mike 4, and Vicky 4, as a driver and as a passenger. Since the figures are different sizes, poses to position the seat are also included.Product Features:* Poser figure: includes obj, cr2/ png, at 97,952 polygons* An ERC dial on the BODY rotates all four wheels.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel.* Rear trunk can open and close, with an ERC dial on the BODY.* Hood can open and close, with an ERC dial on the BODY.-A low-polygon engine can be seen when you open the hood.* The sunroof can open and close, with an ERC dial on the BODY.* The sunroof glass can open and close, with an ERC dial on the BODY.* Right and left front doors can open and close, with an ERC dial on the BODY.* Right and left front door windows can open and close (up and down), with an ERC dial on the BODY.* The front seats can move forward and backward to accommodate the various Poser figures.* This car only has a rear license plate, which is not removable.Textures/ MAT Poses:* Six textures/ MAT poses* Four textures/ MAT poses for the license plateAlso includes corresponding displacement maps to simulate raised lettering on the plates.-Displacement mapping adds extra realism as the plate-lettering is three-dimensional.The license plate is mapped the same as our other cars and trucks, which means you can use those textures on this model.* Bump map on the tires create tread detailing.* Accurately reflecting mirrors.* The body metal, front bumper, and rear bumper are separate materials which means you can further customize the look of your car.* Templates are included and some are color-coded.Position Poses:-A4 Driving, Left Front Seat, Passenger, Right Front Seat-M4 Driving, Left Front Seat, Passenger, Right Front Seat-V4 Driving, PassengerFor use in Poser 5 and above.Poser conversion and rigging by Al Sterner (Meshworks) and Mark Fares (KageRyu).
Modern Pickup Truck (for Poser): A modern pick up truck: rugged, comfortable, yet with plenty of towing power. Product Features:* Poser figure (obj, cr2/ png), with approx 110,612 polygons.* Left and right, front and back doors can open and close, with Pose Control dials on the Body.* All four wheels can rotate, with a Pose Control dial on the Body* Steering wheel is turnable and a Pose Control dial on the Body affects both the front wheels and steering wheel.* The rear tail gate can open and close, with a Pose Control dial on the Body.* The front left and right seats can move front-to-back to accommodate the various Poser figures.- The top sections of the seats can tilt front-to-back.* The rear seat bottoms can rotate up, for extra storage space.* The hood can open and close, with a Pose Control dial on the Body.- A basic engine can be seen when the hood is opened. Textures/ Materials:* Five materials for the Body metal- Black- Blue (default)- Green- Orange- Red* License plates:- Alabama- Arkansas- Texas- Utah- WisconsinAlso includes corresponding displacement maps to simulate raised lettering on the plates.-Displacement mapping adds extra realism as the plate-lettering is three-dimensional.The license plate is mapped the same as our other cars and trucks, which means you can use those textures on this model.* Textured using a combination of texture maps and Poser shader nodes. Texture maps for the fabric materials are included if you want to use this model in another software program. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above.
First Order Flame Trooper Armor (M4): The First Order Flame Trooper Armor from Star Wars: The Force Awakens for use with M4.Includes the following parented props:* Full body armor, 17 separate pieces, for a total of 83,898 polygons.* Helmet, at 8,644 polygons.* Blaster rifle, at 114,350 polygons, which is parented to the right hand.* Does not include boots.* Also includes a material collection file to turn your M4 character`s body parts black.- You could also use a body suit instead of re-coloring your M4 charactersCreated and tested in Poser; has not been tested in DAZ Studio (but should probably work fine).Model by Richard Duda, clean-up by JHoagland.
StarTug (for Poser): The StarTug is a highly stylised sci-fi vehicle with a optional parented container prop. This model accurately represents the ships used by the Terran Haulage Corporation in the mid 25th century. Based in mid earth orbit, the StarTugs would transfer the payloads from the Earth Launchers to the Martian Colony Transports. Scaled to Mike 3, this poser figure has many modelled features including: dangling wires, broken panels and a highly detailed cockpit with knobs, and comes with a distressed mechanical yellow texture set. Also included are .BMP texture templates and a "My Maps" MAT Pose. This is an easy to use system, with full instructions, which makes creating your own texture sets a lot easier. Product Features:* One StarTug figure (obj, cr2, png), with no moving parts* One set of textures (dirty yellow), with MAT pose* One set of "my maps" textures, with MAT pose(These also work as templates for you to make your own textures).* One container prop (obj, pp2, png), parented to the StarTug Original model by mrsparky and sold here with permission.
French Village Corner (for Poser): This is a model of a corner set between two buildings in a typical French or European village.Perfect for romantic scenes- simply put your characters in the balconies or stairs.Many parts, such as the flowers, clothing line, and cables can can hidden or shown for more customization. Product Features:* Poser figure: obj, cr2/ png, with 166,458 polygons.* Includes the following parts which can be hidden/ shown and repositioned:- Letter 1 (in box)- Letter 2 (in box)- Pot 1- Pot 2* Includes the following parts which can be hidden/ shown, but not moved:- Balcony 1- Balcony 2- Cables- Clothing Line- Flowers- Letter Box- Mesh Screen- Pipes- Sheet- Towel Textures:* One texture scheme.* Some materials, such as glass and metal use Poser shaders. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Smart Set (M4) (for Poser): Dress smart in this outfit!Whether your M4 character is going to work or whether he just needs a formal outfit, this clothing will give him plenty of stylish options. The dress shirt includes 9 options for the shirt and 8 options for the tie, including a hide material for the pen, pocket, and tie. Mix and match shirt and tie colors for the best combination for the occasion.The shirt also includes morphs to hide the pen and pocket. Product Features:* Poser figures: obj, cr2/ png:- Dress Shirt, at 22,550 polygons, with the following morphs:-- Hide pen-- Hide pocket-- Tie thicker- Polo Shirt, at 57,328 polygons- Pants / Boots, at 51,847 polygons Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Material Files:* Dress Shirt:- Checkered1- Checkered2- DarkBrown- HidePen- HidePocket- Purple1- Striped1- White1- White2 * Shirt only:- Checkered1- Checkered2- DarkBrown- Purple1- Striped1- White1 * Tie only:- 0ShirtHide- BluePolkaDot- BlueSolid- BrownCheckered- DarkBrown- HideTie- RedDark- RedPolkaDot- RedSolid * Polo Shirt:- Blue- Brown- Dark Gray * Pants:- Hide Button- Beige- Brown Plaid- Tweed Textures:* One set of texture maps for each clothing. Morphs:* Each clothing includes the usual shape morphs to fit your M4 character. Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Recon Trooper (for Poser): Introducing the Imperial Alliance`s army: the Recon Trooper.This soldier is clad in blaster-resistant armor and is armed with a class-5 assault rifle. The helmet provides a breathable atmosphere in any location as well as displaying all needed data for the given mission. At 8,149 polygons, this figure is great for use in crowd scenes or to build your own army of troopers. The 4096x4096 texture maps give it good detail at close-up as well. Product Features:* Recon trooper: fully rigged, stand-alone human figure for use in Poser, with 8,149 polygons.- Includes "Grasp", "Finger Grasp", and "Fingers Spread" ERC dials on the hands.* Helmet, parented to the head, at 1,271 polygons.* Assault rifle, parented to the right hand, at 4,172 polygons. Textures:* One set of texture maps:- Trooper: texture, specular, and normal bump map at 4096x4096 pixels.- Gun: one texture map at 2048x2048 pixels.- Helmet: texture, specular, and normal bump map at 208x2048 pixels. Note: The character was designed with a helmet that should not be removed. The model does have a basic head, but there is no texture map for it. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio; although DAZ Studio may import the files, we do not use DAZ Studio and can't support any issues that may occur. This model is fully licensed for use in games and apps.Also works great as background scene-filler. Original model by Arteria3D, Poser conversion and rigging by PhilC.Uploaded for sale here with full permission.
Egypt Set (for Poser): A set of colorful Egyptian themed props, including statues and buildings. Product Features:* Includes the following 16 Poser figures: (obj, cr2/ png with no moving parts.* All models are made with 3-point polygons- Building A, at 244 polygons.- Building B, at 308 polygons.- Cat, at 20,528 polygons.- House, at 1040 polygons. The door can open and close with a Pose Control dial and it has an empty interior with a sandy floor.- Obelisk, at 153 polygons.- Pillar A, at 1,338 polygons.- Pharaoh Statue A, at 56,922 polygons.- Pharaoh Seated Statue, at 57,544 polygons. The statue and seat are separate parts.- Ram Sphinx, at 35,920 polygons.- Statue Stand, at 184 polygons.- Temple Entrance Pylon, at 4,855 polygons.- Temple Main Entrance, at 2,028 polygons.- Temple Room A, at 1,067 polygons.- Temple Room B, at 2,604 polygons.- Temple Room C, at 752 polygons.- Temple Room D, at 3,348 polygons. Textures:* One set of texture maps, ranging from 4096x4096 to 4096x2048 to 2048x2048 pixels.* The texture maps are used as bump maps to conserve memory. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Late Night TV Show Set (for Poser): This is a typical late night TV show set. Your host or hostess can sit behind the desk and interview the guests sitting in the chairs.A sidekick or second guest can sit in the other chair.Two cameras can record or broadcast the interviews.And for a more open set, move or hide the desk. Product Features:* Poser figure: obj, cr2/ png, with 86,763 polygons.* Includes the following parts:- All three chairs- Desk- Left and right cameras.- The tops of the cameras can rotate up and down. Textures:* One texture scheme.* Some materials, such as glass and metal use Poser shaders. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Wilbur Bridge (for Poser): A more advanced bridge for a more advanced starship. A rear door opens to the hallway behind the bridge and additional doors leads to additional rooms. (Note that no additional rooms are included beyond the hallway.) Product Features:* Poser figure file (obj, cr2/ png), with 68,560 polygons.* The helm, ops, and outer chairs are separate parts which can be rotated or repositioned in the scene.* All of the doors can open and close with ERC dials on the Body.* All of the walls can be hidden or shown to suit the needs of your scene.* The captain's chair and first officer's chair can not move.* Includes a hallway behind the bridge, but there are no hallways on the other side of the hallway doors. Textures:* Two color schemes, which includes texture maps and Poser shaders:- Peach and Tan- White and Dark Blue Poses:* Hide/ show poses for each wall and the ceiling for the bridge and hallway Cameras:* Eighteen camera files are included.* The camera files also hide any walls which may be blocking the camera.You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. This product is meant for use in Poser 6 and above and may not work correctly in other software programs. All images rendered in Poser Pro using a combination of lights and Indirect Lighting (IDL) using the included camera presets.
Medieval Dress C (V4) (for Poser): Dress your character in this medieval set of clothing. Perfect for walking around town, going to the marketplace, or any fantasy scenes.The included Hood covers your character`s head for extra modesty or to keep the sun off her head.The Robe/ cape gives your character a regal look while offering additional warmth in the winter. Product Features:* Poser figures: obj, cr2/ png:- Dress, at 14,480 polygons.- Hood, at 9,588 polygons.The Hood doesn't have any shape morphs because V4's head doesn't have any shape morphs.- Robe, at 9,526 polygons.The Robe`s cape parts includes ERC dials for Twist All, Side to Side All, and Bend All. The dress includes the usual morphs to fit your V4 character Textures:* One set of texture and normal bump maps, at 4096x4096 pixels. Requires the previous download and installation of Victoria 4 (V4) from DAZ.All images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Stellar Cartography Lab (for Poser): Analyze the galaxy in this stellar cartography lab.The main display can be configured to show the immediate region of space or further into the galaxy- the only limit is what's in your computer banks!Additional monitors can show the same display or the status of various ship functions. Product Features:* Poser figure: obj, cr2/ png, with 47,935 polygons.* The stool is a separate part which can be hidden/ shown or repositioned in the scene.* The upper console can rotate.* All of the walls can be hidden or shown to suit the needs of your scene.* All 4 sets of doors can open and close with Pose Controls dials on the Body.- Although all of the doors can open, there are no corridors behind the doors. We recommend using one of the many corridor sets, for sale here, for background hallways. Textures:* One set of texture maps.* The door labels and wall badges are mapped the same as the Futuristic Hallways and Junior Officers Quarters, so you can use the same textures will all 3 models.* Also uses Poser Firefly shaders such as ambient lighting and metal. Hide/ Show Presets:* Hide/ show each wall and the ceiling.- Hiding and showing each wall hides and shows the corresponding doors. Cameras:* Nine camera files are included.* The camera files also hide any walls which may be blocking the camera.- You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software.
Shanty Town Buildings 2: Set 3 (for Poser): The third set of buildings to build your own town and village. Includes 4 models which also work nicely with the other Shanty 2 Building Sets and the Shanty 2 Town Blocks. Some buildings have moving parts, such as doors and shelves which can be opened and closed, some buildings have stools which can be repositioned, and some buildings have a ceiling and walls which can be hidden or shown.Does not include a terrain or ground. Product Features:* Includes the following Poser figures: (obj. cr2/ png):- Building J, at 727 polygons; no moving parts and no interior.- Building K, at 912 polygons. Includes a ceiling and 4 walls.- Building L, at 418 polygons. Includes a ceiling and 4 walls. The window material can be made transparent by adjusting the material.- Building O, at 505 polygons. Includes a ladder, ceiling, and 4 walls. Textures:* One set of texture maps, at 4096x4096 pixels with corresponding normal/ bump maps, for each building. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Sci-Fi Hallways (for Poser): Designed for use with the Starship Bridge 7 (or separately), this is a set of hallway/ corridor sections for all your sci-fi, fantasy, or industrial scenes. Scaled to the Poser people, at about 20 feet tall and 40 feet wide, these hallway sections can also fit small vehicles, alien intruders, or robotic armies.For a more intimate setting, try reducing the scale of the hallways. Product Features:* Poser figure files (obj, cr2/ png)* Short section (1 archway): 8,291 polygons* Long section (4 archways): 33,797 polygons* Long curved sections (9 archways): 66,961 polygons-Right-curved at 45 degrees-Left-curved at 45 degrees* Doorway arch, which can be positioned at the end of the hallway sections: 255 polygons The right wall, left wall, and ceiling (for each hallway section) can be hidden or shown to suit the needs of your scene using the included hide/ show poses. Textures:* One set of textures (at 2048x2048 pixels) is included.-Includes texture map, bump map, and ambient map* All of the hallway sections use the same UV mapping, which means you can use the same textures on each one.* Templates are included for all materials, and some are color-coded for ease-of-use. Poses:* Hide/ show the left wall, the right wall, and the ceiling* All of the hallway sections use the same part names, which means the hide/ show poses will work on each one.
Packard Car 1930 (for Poser): Packard was a United States based brand of luxury automobile built by the Packard Motor Car Company of Detroit, Michigan, and later by the Studebaker-Packard Corporation of South Bend, Indiana. The first Packard automobiles were produced in 1899 and the brand went off the market in 1958. Packard automobiles are highly sought after by collectors today, and the marque enjoys an active collectors club system. Due to the similarities in the design of the Packard Seventh Series, this digital version could be either the "726 Standard Eight" or the "733 Standard Eight". Product Features:* Poser figure (obj, cr2/ png), with 158,638 polygons.* Model built entirely with 3-sided polygons.* Opening and closing doors.* Accurately opening and closing left and right front hood sections (with ERC dials on the BODY).* Front seats can move forward and back to accommodate figures of different sizes.* All four tires can rotate around.* Front tires are steerable.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel. Original model by Digimation, uploaded for sale here with permission.
Starship Bridge XT (for Poser): Inspired by the smaller command centers of older starships, this bridge combines the compact design with futuristic touches.Four outer stations monitor all of the ship's systems, from tactical to science to communications to engineering. A center console allows control over both the helm and ship operations. The rear of the bridge includes a tactical display table where the crew can review the upcoming mission or further analyze any situations. Four doors at the front of the bridge allow the crew members into and out of the bridge. A captain`s ready room is located off the rear of the bridge, which allows the captain to relax or meet with crew members. The ready room includes two chairs and a couch, but more chairs can be brought in as needed. Product Features:* Includes two Poser figures (obj, cr2/ png)- Bridge XT room, at approx 214,649 polygons.- Executive Chair, at approx 14,979 polygons. Bridge Room:* Poser figure (obj, cr2/ png), at approx 214,649 polygons.* As is usual for our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* Lift door can open and close, with an ERC dial on the Body.* Helm chair can rotate around, with an ERC dial on the Body.* Helm console can rotate, with an ERC dial on the Body.* Two sets of left front doors can open and close, with an ERC dial on the Body.* Two sets of right front doors can open and close, with an ERC dial on the Body.* Two sets of left rear doors can open and close, with an ERC dial on the Body.* One set of right rear doors can open and close, with an ERC dial on the Body.* An ERC dial on the Body moves the Science and Tactical chairs on the "track".* The side bridge chairs are separate body parts which can be repositioned to suit the needs of your scene.* Includes the captain's ready room off the rear of the bridge. Chair Features:.* The back can bend, with an ERC dial on the Body.* The bottom can rotate, with an ERC dial on the Body.* The Bridge XT cr2 file already has the chair in place, so you don't need to add it to the scene.* Since the chair is a separate figure, you can add more to the scene or use it in other room sets. Textures:* One color scheme for all the monitor displays is included. Poses:* Hide/ show poses for each wall and the ceiling, for both the bridge and hallway. Cameras:* Fourteen camera files are included.* The camera files also hide any walls which may be blocking the camera.You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. Designed for use in Poser 5 and above.
F105F/G Thunderchief (for Poser): The Republic F-105 Thunderchief was a supersonic fighter-bomber used by the United States Air Force. The Mach 2 capable F-105 conducted the majority of strike bombing missions during the early years of the Vietnam War; it was the only U.S. aircraft to have been removed from combat due to high loss rates. Originally designed as a single-seat, nuclear-attack aircraft, a two-seat Wild Weasel version was later developed for the specialized Suppression of Enemy Air Defenses (SEAD) role against surface-to-air missile sites. The F-105 was commonly known as the "Thud" by its crews. The Thunderchief was the largest single-seat, single-engine combat aircraft in history, weighing approximately 50,000 pounds (23,000 kg). It could exceed the speed of sound at sea level and reach Mach 2 at high altitude; the F-105 could carry up to 14,000 lb (6,400 kg) of bombs and missiles. The Thunderchief was later replaced as a strike aircraft over North Vietnam by both the McDonnell Douglas F-4 Phantom II and the swing-wing General Dynamics F-111 Aardvark. However, the "Wild Weasel" variants of the F-105 remained in service until 1984 when they were replaced by the specialized F-4G "Wild Weasel V". Here are some of the Highlights: * Over 50 Points of Articulation on the main figure! * Moving Flaps, Ailerons, Spoilers, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seats... * Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation! * Nose Radome opens to reveal the AN/APN-131 Radar Set. * Conforming Dummy Aircrew figure to use to place a Flight Crew in the Cockpit. * Conforming Crew Boarding Ladders and FOD Storage Covers for the Engines and Air Intakes. * 14 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the F105 Thunderchief, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing a total combination of over 100 variations of weapons loads that can be loaded based on mission requirements!No additional files will be needed to use this product... it is a stand-alone figure! Product created by, and acquired from, Chris Schell, and is now owned by VanishingPoint.
Medieval World Set 1 (for Poser): Build your own medieval world with this new set from Arteria3D. Includes all the buildings seen in the sales images.Mix and match these buildings with the other Medieval World buildings or the other, similar buildings also from the Arteria3D collection. Product Features:* Includes the following Poser figures: (obj, cr2/ png):- Cart, at 1,167 polygons. The handle, front wheels, and rear wheels are separate parts that can rotate.- Inn, at 13,902 polygons. Includes a detailed interior which can be seen through the open door. There are 5 tables and 14 stools which are separate parts that can be hidden/ shown or repositioned.- House 1, at 4,185 polygons, with no moving parts.- House 2, at 4,203 polygons, with no moving parts.- House 3, at 4,032 polygons, with no moving parts.- House 4, at 9,178 polygons, with no moving parts. Some buildings have interiors that can be seen through the open entrance... see if you can find them! Textures:* Texture maps with corresponding normal/ bump maps, at 2048x2048 polygons. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Starship Bridge XT 2 (for Poser): Introducing the next bridge set for Poser: the Starship Bridge XT 2. Like all of our bridges, console stations are arranged along the outer ring, with the captain and helm/ navigation in the center. This bridge includes additional sit-down stations to the right and left of the helm as well as two stand-up stations on either side of the captain`s chair. This bridge set uses a front glass window instead of a viewscreen. An exterior front wall surrounds the window, which makes it perfect for images looking into the bridge from the outside. An elevator/ lift is located to the left-rear of the bridge. although the door can open, the lift doesn't move. A circular hallway can be added behind the right-rear doors. The hallway is included in this product as a separate model. Product Features:* Includes two Poser figures (obj, cr2/ png):- Bridge, at 119,110 polygons.- Hallway, at 47,210 polygons.These are separate figures so you add the hallway as needed or use it separately.* Although the hallway can be added behind the bridge, there is no additional hallway behind the hallway`s doors. Moving Parts:* Like our other Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* The doors can open and close (with an ERC dial on the BODY):- Bridge: right-rear doors and lift door.- Hallway: rear doors.* All of the chairs (including the captain's chair) can rotate or be repositioned in the scene.* The chairs around the outer ring of the bridge can be safely stowed under the consoles. Textures:* One set of textures is included.* This model uses Poser`s shader nodes for some materials.* All of the monitors and consoles use their own texture maps for further customization. Poses:* Hide/ show each wall and the ceiling for both the bridge and hallway. Cameras:* Camera files are included:- 14 for the bridge.- 5 for the hallway.* The camera files also hide any walls which may be blocking the camera.* All of the sales images were created using the included camera files. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio.
Marine Interceptor Boat (for Poser): A model of a typical marine law enforcement patrol boat. Perfect for use in a river, lake, bays, or wherever else your characters can go.Alligators, manatees, and plants not included.Product Features:* Poser figure files: obj, cr2/ png:* Boat, with 8,364 polygons.- The rear door can open and close, with a Pose Control dial on the Body.- The front hatch, console hatch and storage hatch can open and close, each with a Pose Control dial on the Body.- The front and rear seats can rotate up and down, each with a Pose Control dial on the Body.- The left and right rear hatches can open and close, each with a Pose Control dial on the Body.- The left and right shifters can rotate front-to-back.- The steering wheel can rotate, with a Pose Control dial on the Body.* Engines, at 2,011 polygons.- The engine can rotate on the boat mount.- The propeller can rotate.Bonus: When the engines are parented to the boat, the boat's Steer dial also affects the engines! Turn the wheel to the right and the engines rotate to the left (to turn the boat to the right).* Patrol Top, at 2,417 polygons.- Antenna can rotate up and down, with a Pose Control dial on the Body.- The spotlight can rotate, with a Pose Control dial on the Body.- The spotlight can tilt up and down, with a Pose Control dial on the Body.Textures / Material Collection Files:.* Two color schemes for the hull, including:- Marine Patrol- Sheriff* 10 material files for the various lights:- Bow Light on/ off- Interior Lights on/ off- Patrol Blue- Patrol Lights on/ off- Patrol Red- Patrol Yellow- Spot Light on/ off- Stern Light on/ off- Underwater LED on/ off* All of the materials use Superfly shaders.* Some materials use textures located under the Poser 12\Runtime\Textures folder.Designed for use in Poser 12 and above with Superfly. Not recommended for use in other software programs.Original model by dogor and sold here with permission.
P.I.C.K. SciFi Base (for Poser): Poser Indoor Creation Kit, or "PICK", was designed for the accurate, realistic and flexible creation of indoor SciFi Poser scenes. The components were modeled to seamlessly integrate with each other while giving the flexibility to create the SciFi scene YOU want. Modeled in exact scale with extreme accuracy in both models and textures PICK SciFi provides the "tools" needed to set up a realistic indoor SciFi scene within minutes. Whether you want a communications bridge, a corridor or a full space station or space ship interior PICK allows you to build the scene you have in mind rather than being stuck with preset sets.Unleash your creative mind - thousands of potential combinations at your fingertips!.: Product Features :.* 48 Individual Components (3D models - .PP2 and .OBJ formats)* 14 Base shaders (.MC6)* 16 Preset shaders (.MC6)* 31 Screen textures (.MC6)* Full Documentation and Users Guide (.HTML)Most of the included components have morphs to change the look and feel, open/close doors, raise/lower chairs and consoles, etc.For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Angelic Rebel (V4) (for Poser): Is your character a heroic angel? Or is she a villain? Or is she something a combination? Or maybe she's dressed up for a night on the town.With this set of clothing, it's up to you. .: Product Features :.* Poser figures: obj, cr2/ png:* Boots, at 36,188 polygons; no position morphs.* Hair, at 5,088 polygons; no position morphs,* Jacket, at 50,896 polygons; includes the following position morphs:- Open1- Open2- Open Full- Back (up)- Broken Zipper- Loose Fit- Open Full Both Out- Open Full Left Out- Open Full Right Out- Left Elbow Fix- Right Elbow Fix* Skirt, at 39,904 polygons; includes the following position morphs:- Blow Up- Left Back- Left Kick- Left Side- Right Back- Right Kick- Right Side- Relax* Vest, at 108,88 polygons; includes the following position morphs:- Pull Up (front)- Show Tummy * Sword, at 2,525 polygons:- Saved as a smart prop and parented to your V4 character`s right hand. .: Textures :.* One set of textures. .: Morphs :.* Each clothing includes the usual shape morphs to fit your V4 character Requires the previous download and installation of Victoria 4 (V4) and Vicky 4 Morphs++ from DAZ. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Starship Bridge 12 Poses: This is a set of 48 poses for M4 and 48 poses for V4 for use with the Starship Bridge 12 for Poser.Includes full-body, lower/ partial, and upper/ partial poses. Use the full body poses to quickly position your characters on the bridge or use the partial poses to create new combinations of poses..: Product Features :.* M4 Poses: Full Body/ Lower Body/ Upper BodyAt Station 1, 2 LH, RHAt The Helm 1, 2, 3 LH, RHComing On Bridge LH, RHEngage LH, RHIn The Big Chair 1,2 LH, RHLeaving The Bridge LH, RHObserving LH, RHStands At The Helm LH, RH* V4 Poses: Full Body/ Lower Body, Upper BodyAt Station 1, 2 LH, RHAt The Helm 1, 2, 4 LH, RHComing On The Bridge LH, RHEngage LH, RHIn The Big Chair 1,2 LH, RHLeaving The Bridge LH, RHObserving 1 LH, RHStanding At The Helm 1 LH, RHRequires the installation of Michael 4 (M4) and Vicky 4 (V4), available at DAZ.Requires the installation of the Starship Bridge 12, available for sale here.Poses created by Colin Gerbode and commissioned by Vanishing Point.For use in Poser 6 and above.
Kapitanleutnant (M4) (for Poser): Dress up your M4 character in this military uniform. He can be a soldier, general, officer, or whatever your scene needs.Includes jacket, shirt, turtleneck jumper, hat, and pants. (Boots are included as part of the pants.) This is a set of super-conforming clothing for V4. Super-conforming means the morphs on the clothing will automatically follow the morphs of your M4 character.For example, if you set your character's Bulk morph to 1.0 and then add the clothing, the clothing's Bulk morph will also be set to 1.0. Product Features:* Poser figures: obj, cr2/ png:* Cap, at 10,318 polygons; includes the following position morphs:- Over Eyes- Jaunty AngleNote: the cap does not include any shape morphs since the top of M4's head isn't affected by morphs. * Jacket, at 29,719 polygons; includes the following position morphs:- Backwards- Forward- Left Side- LShldrFix- LShldrFix+- Longer- No Top Buttons- Open Bottom Button- Over Jumper- Right Side- RShldrFix- RShldrFix+ * Jumper, at 1,496 polygons; no position morphs.Note: the jumper only a chest and neck and is meant for use under the jacket. * Pants, at 51,607 polygons; no position morphs.Note: the boots are part of the pants. * Shirt, at 6,631 polygons; includes the following position morphs:- No CrossNote: the shirt only a chest and neck and is meant for use under the jacket.The tie is part of the shirt. .: Textures :.* One set of texture maps.* Two material files for the Jacket and Pants:- Black- Blue* Four material files for the Shirt tie:- Black- Blue- Red- Hide tie, ribbon, and cross .: Morphs :.* Each clothing includes the usual shape morphs to fit your M4 character Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Roman Outfit (M4) (for Poser): Relive the Roman times with this outfit. Dress your character in the typical white toga or add some color to show your character is royalty.Add the laurel head piece, or not- it's up to you! Product Features:* Poser figures: obj, cr2/ png:* Cuffs, at 2,880 polygons; no position morphs.* Laurel, at 24,000 polygons; no position morphs.* Sandals, at 16,768 polygons; no position morphs.* Toga, at 17,380 polygons; includes the following position morphs for the skirt:- Left Back- Left Kick- Left Side- Right Back- Right Kick- Right Side- Sit .: Textures / Material Files :.* One set of texture maps for each clothing.* Colors/ material files for the Toga and Sash:- Blue- Gold- Green- Purple- Red- White .: Morphs :.* Each clothing includes the usual shape morphs to fit your M4 character, where applicable. Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
American High School (for Poser): Based on real world buildings and references, here`s an American style High School. This model also makes for a nice office block.This model has 2 parts... The first part is a single building scaled to standard sized Poser people. Working features include opening doors and a selection of opening windows. Extra details include an assortment of roof accessories like vents.The second part is an optional small room-like inset with blackboard, moveable desks and bin. This has been designed, created and included so you can easily create `look through window sequences` as found in some TV cartoons.It also has 3 texture variants, with MAT poses, so you can use it for both redbrick and urban schools. As this model is physically scaled to the same size as a real school building, and is designed primarily for middle to background useage, texture sizes are typically 1024x1024. A set of basic templates are included if you want to make your own, or higher res maps.  Product Features:* Two Poser figures: obj, cr2/ png.* School Building, at 56,811 polygons:-Front, rear, and side doors can open and close (with ERC dials on the BODY).-The vents on the roof can be hidden, shown, or rotated to suit the needs of your scene.-Windows numbered 01A to 14A can open and close (with individual ERC dials on the BODY).-The interior doors do not move.-Three texture variants/ MAT poses.* School Room, at 864 polygons:-Scaled to fit within the rooms of the school building.-All three desks, all three chairs, and the garbage can are separate body parts which can be moved or rotated to suit the needs of your scene. (The trans and rotate dials have been made visible.)
Christmas Tree and Gifts (for Poser): A set of Christmas items: tree, skirt, and 3 gift boxes. The bows and labels on the gift boxes are separate materials- make them transparent to change the look of the boxes.Templates are included for the gift boxes, so feel free to make your own gift wrap design. Features:* Poser figure: obj, cr2/ png:- Christmas Tree, at 267,059 polygons; no moving parts.- Christmas Tree Skirt, at 945 polygons; no moving parts.- Gift Box 1, at 2,028 polygons; no moving parts.- Gift Box 2, at 9,853 polygons; the lid can be hidden/ shown or repositioned.- Gift Box 3, at 2,034 polygons; no moving parts. Textures:* One texture scheme. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Police Constable (M4) (for Poser): Calling all patrolmen! You`re needed on duty! Let you M4 character patrol the city in this police officer`s uniform.Includes jacket, pants (with boots) and 2 helmets: white and blue. Product Features:* Poser figures: obj, cr2/ png: * Hat 1 (white), at 3,722 polygons; no position morphs. * Hat 2 (blue), at 3,721 polygons; no position morphs. * Jacket, at 60,156 polygons; includes the following position morphs:- ShldrFix-Left- ShldrFix-Right- ShldrFix-Both- Left Side Fwd- Back Out- Front Out- Left Side out- No Belt- No Vent- Right Side out- Thicker Waist- Walk Left- Walk Right * Pants, at 51,847 polygons; no position morphs.- The boots are part of the pants. .: Textures / Material Files :.* One set of texture maps for each clothing. .: Morphs :.* Each clothing includes the usual shape morphs to fit your M4 character, where applicable. Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Galactic Oligarch (M4) (for Poser): Come to attention, soldier! The commander is on deck!Use this uniform to create your own admiral, commander, general, ambassador, or any other officer in charge. The bottom of the jacket is designed to fit over the pants and the boots are part of the pants. Product Features:* Poser figures: obj, cr2/ png:* Jacket, at 19,044 polygons; includes the following position morphs:- High Hem- Left Out- No Shirt- Right Out- Tail Jacket- Undo Jacket (opens the top of the jacket and hides the shirt)- Left Up- Right Up * Pants, at 56,780 polygons; does not include any position morphs. Textures/ Materials:.* Two texture schemes and material collection files:- Brown (default): jacket and pants- Blue Gold Formal: jacket and pants .: Morphs :.* Each clothing includes the usual shape morphs to fit your M4 character Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Starship Bridge 12 (for Poser): Introducing the next starship room for Poser: the Starship Bridge 12.Product Features:* Includes one Poser figure (obj, cr2/ png), at 112,172 polygons.Moving Parts:* Like our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* The rear left and right doors (on the rear walls) can open and close (with ERC dials on the BODY).* The helm chair can rotate (with ERC dials on the BODY).* The captain's chair can not rotate.Textures:* One set of textures is included.* Does not use Poser shader nodes.* Templates are included, and some are color-coded for ease-of-use.Poses:* Hide/ show each wall and the ceiling.* Hiding and showing the left wall hides and shows the left doors and lift, and hiding and showing the right wall hides and shows the right doors and lift.Cameras:* Nine camera files are included.* The camera files also hide any walls which may be blocking the camera.Scene File:* Includes the Starship Bridge 12 in the center of the scene.* The light set in the included scene file has Ambient Occlusion enabled for the top light.-This will create additional detailing, but may increase render times.Recommended for use in Poser 5 and above, though the Ambient Occlusion lighting will only work in Poser 6 and above.People, clothing, and poses not included.All sales images rendered with the included camera presets.
Battle Bridge (for Poser): A "battle bridge" is a secondary command center on many starships. All of the crew functions can be transferred to these controls from the main bridge and various monitors display the ship's status. Unlike the larger bridges, this room only has seating for the Captain, the Helm and Ops officers, and three stand-up stations in the rear (though some ships may not install all three stations).Product Features:* Includes one Poser figure (obj, cr2/ png), at 48,226 polygons.Moving Parts:* Like our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* The rear left and right doors (on the rear walls) can open and close (with ERC dials on the BODY).* The front left and right doors (on the rear walls) can open and close (with ERC dials on the BODY).-Although all of the doors can open, there are no corridors behind the doors. We recommend using one of the many corridor sets, for sale here, for background hallways.* The helm and ops consoles can swing open for easier seating (with ERC dials on the BODY).* The helm and ops chairs can rotate (with ERC dials on the BODY).* The three rear (stand-up) stations are separate parts, which can be hidden or shown to suit the needs of your scene.* The captain's chair can not rotate.Textures:* One set of textures is included.* Templates are included, and some are color-coded for ease-of-use.Poses:* Hide/ show each wall and the ceiling.* Hiding and showing the left wall hides and shows the left doors, and hiding and showing the right wall hides and shows the right doors.* Hide/ show each of the rear (stand-up) consoles.Cameras:* Thirteen camera files are included.* The camera files also hide any walls which may be blocking the camera.Scene File:* Includes the Battle Bridge, centered in the scene.* The light set in the included scene file has Ambient Occlusion enabled for the top light.-This will create additional detailing, but may increase render times.Recommended for use in Poser 5 and above, though the Ambient Occlusion lighting will only work in Poser 6 and above.All sales images rendered with the included camera presets.
Business Conference Room (for Poser): This is a business conference room, perfect for meetings or conferences.A set of 10 chairs surrounds the table... or any late-comers can bring in their own chairs.The TV can be programmed for a slide show or hooked up to a computer for a presentation. Product Features:* Two Poser figures: obj, cr2/ png:* Conference Room, with 7,086 polygons.* Chair, with 18,228 polygons.* The conference room includes the following parts which can be hidden/ shown or repositioned:- 2 Pictures on the wall- TV Stand- TV- Table- All of the walls and ceiling can be hidden/ shown.- The door can open and close with a Pose Control dial on the Body.* The chair does not have any moving parts.* Also includes a third figure file which includes the conference room with 10 chairs arranged around the table. Textures:* One texture scheme.* The backdrop image uses maximized mapping so you can easily use your own image.* Some materials, such as glass and metal use Poser shaders. All sales images rendered in Poser Pro 2012 using a combination of a diffuse lights and indirect lighting from the ceiling. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Detention Cells (for Poser): Your characters have been found guilty and now they`ve been sentenced to this detention block. Or were they captured while transmitting stolen space station plans and they`ve been scheduled for termination without a trial?Three cell blocks lead off the main lobby and three lifts allow access from other parts of your spaceship or station.Please be aware that the wall hatches do not lead to trash compactors and disposing of trash in this way is not proper protocol.Product Features:* Poser figure file (obj, cr2/ png), with 183,299 polygons.* Six sets of cell doors can open: 2 left (left and right), 2 center (left and right), and 2 right (left and right), with ERC dials on the Body.Be aware that all of the doors on each cell block open and close at the same time, so prepare your guards.* Three lift doors can rotate open with ERC dials on the Body.* The center console can be hidden or shown or rotated to further customize the look of your scene.* The overhead Security Camera parts can be hidden or shown or rotated to "look" at other parts in the scene.* All of the walls and ceilings can be hidden or shown for easier camera placement.Textures:* One color scheme, which includes texture maps and Poser shaders.Poses:* Hide/ show poses for the walls and the ceilings, which also hide any doors on the walls.Cameras:* Fifteen camera files are included.* The camera files also hide any walls which may be blocking the camera.You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed.This product is meant for use in Poser 6 and above and may not work correctly in other software programs.All images rendered in Poser Pro using a combination of lights and Indirect Lighting (IDL) using the included camera presets.
Flight Attendant 1950s (V4) (for Poser): All aboard! Flights are now departing for the 1950`s! Dress your V4 characters in this flight attendant outfit.Includes dress, hat, and jacket and multiple colors for each! This is a set of super-conforming clothing for V4. Super-conforming means the morphs on the clothing will automatically follow the morphs of your V4 character.For example, if you set your character's Bulk morph to 1.0 and then add the clothing, the clothing's Bulk morph will also be set to 1.0. .: Product Features :.* Poser figures: obj, cr2/ png:* Dress, at 20,196 polygons; includes the following position morphs:- Left Back- Left Kick- Left Side- Right Back- Right Kick- Right Side * Hat, at 6,000 polygons; no position morphs.- Includes hair under the hat, which can be made transparent or recolored.- The badge and lettering are separate materials which can be recolored to suit the needs of your scene. * Jacket, at 23,504 polygons; includes the following position morphs:- Close Jacket- Flare Open- Open Fully- Left Side flare- Right Side flare- Lift Collar * Shoes, at 6,992 polygons; no position morphs. .: Textures / Material Files :.* Colors for the Hat, Dress, and Jacket:- Blue- Green (default)- Purple- Red- Yellow* Hair colors for the Hat:- Auburn- Blonde (default)- Dark- Red* Includes Length-Short and Length-Shorter transparency maps for the dress .: Morphs :.* Each clothing includes the usual shape morphs to fit your V4 character Requires the previous download and installation of V4 and Vicky 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Century Bridge (for Poser): Product Features:This set includes 3 rooms in one model:* Main Bridge* Conference Room* Captain`s Ready BridgeBridge:* Poser figure file (obj, cr2/ png), with 221,455 polygons.* The helm chair base can move left-to-right on a track, with an ERC dial on the Body.- The helm chair itself can rotate.* All of the chairs are separate parts which can be rotated or repositioned in the scene.- This includes the captain chair, first officer chair, and second officer chair.* The center station and left and right stations can be hidden or shown to further customize your scene.* All of the doors can open and close with ERC dials on the Body.- Two rear doors have lifts behind them.- The left rear door leads to the ready room.- The left and right front doors lead to hallways which connect to the conference room.- There are no hallways on the other side of the rest of the doors.* All of the walls can be hidden or shown to suit the needs of your scene.Conference Room:* The table is a separate part which can be rotated or repositioned in the scene.Ready Room:* Includes the following parts:- Couch- Desk- Two visitor chairs- Table- Statue on the tableExecutive Chair:* Poser figure file (obj, cr2/ png), with 14,199 polygons.- This is a separate model: add as many to your scene as needed."All Rooms"* This file loads the bridge, 1 chair in the ready room, and the 10 chairs in the conference room.Poses:* Hide/ show poses for each wall and the ceiling for the bridge and hallway.* Includes separate folders for the walls of the bridge, conference room, and ready room.Cameras:* Bridge: 20 camera files* Conference Room: 4 camera files* Ready Room: 3 camera files* The camera files also hide any walls which may be blocking the camera.You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed.This product is meant for use in Poser 6 and above and may not work correctly in other software programs.All images rendered in Poser Pro using a combination of lights and Indirect Lighting (IDL) using the included camera presets.
Christmas Wreath (for Poser): A model of a Christmas wreath. Features:* Poser figure: obj, cr2/ png, with 167,750 polygons, and no moving parts. Textures:* One texture scheme. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Roman Buildings Set I (for Poser): This is a set of Roman style buildings, complete with houses, stores, temples, and more.The models range in size from low to medium polygon count with hi-resolution texture maps.Use these models to quickly create a Roman style town or village or use them as background buildings to help fill out your scene.Product Features:* Includes the following Poser figures: (obj, cr2/ png):- Building 2, at 2,235 polygons. Includes a separate Bench part which can be hidden/ shown or repositioned.- Building 3, at 2,252 polygons.- Building 4, at 15,003 polygons.- Building 5, at 4,401 polygons.- Building 6, at 8,846 polygons.- Building 7, at 3,265 polygons.The buildings do not have any moving parts.Street and ground texture not included.Textures:* One set of texture maps, at 2048x2048 pixels.Note: These buildings do not include bump maps and are meant for distance shots. Some textures may look blurry when viewed up-close.All sales images rendered in Poser Pro 2012.This product is designed for use in Poser 6 and above.Original model by Arteria3D and uploaded for sale here with full permission.
Bricks And Stone Seamless Textures: This is a set of 18 rock and concrete textures and corresponding normal bump maps in jpg format.These textures range in size from 2141x827 to 2865x2000. Product Features:* Poser: 18 Material files (mt5/ png) to quickly apply the textures and bump maps:- Brick And Cap- Cracked Mud- Dark Slate Rock Wall- Flagstone Wall- Large Paver Wall- Light Fieldstone- Long Rectangular Wall- Lt Red Brick- Red Brick Pavers- Red Dark Wall- Rgh Rock Wall- Rock Tile- Square Cut Stacked- Square Rough Tiled- Stone Brick Mess- Stone Wall- Thin Stacked Rock Wall- Varigated Rock Wall * DAZ Studio: 18 Material files (duf/ png) to quickly apply the textures and bump maps, named the same as the Poser versions- All of the materials use Iray shaders. Models not included. Note: this is NOT a merchant resource kit.You may use these textures on your own models and your own images and animation, but you are not authorized to redistribute the images as images or as texture maps. Original product by, and acquired, from Poserworld, and now owned by VanishingPoint.
Roman Buildings Set II (for Poser): This is the second set of Roman style buildings, complete with houses, stores, temples, and more.The models range in size from low to medium polygon count with hi-resolution texture maps.Use these models to quickly create a Roman style town or village or use them as background buildings to help fill out your scene.Product Features:* Includes the following Poser figures: (obj, cr2/ png):- Building 8, at 1,374 polygons.- Building 9, at 9,884 polygons.- Building 10, at 2,926 polygons.- Building 11, at 2,317 polygons.- Building 12, at 3,809 polygons.- Pantheon, at 4,158 polygons.The buildings do not have any moving parts.Street and ground texture not included.Textures:* One set of texture maps, at 2048x2048 pixels.Note: These buildings do not include bump maps and are meant for distance shots. Some textures may look blurry when viewed up-close.All sales images rendered in Poser Pro 2012.This product is designed for use in Poser 6 and above.Original model by Arteria3D and uploaded for sale here with full permission.
The Orville (for Poser): The Orville from the FOX TV show The Orville.The U.S.S. Orville (ECV-197) is a mid-level exploratory space vessel in the Planetary Union, a 25th-century interstellar alliance of Earth and many other planets.Model Features:* Poser figure: obj, cr2/ png, with 110,476 polygons.* Not scaled to the size of the Poser/ DAZ figures.* No moving parts.Textures:* One texture map with the name of the ship.* The rest of the materials use Poser shaders.Designed for use in Poser 6 and above and not supported in any other software.Original model by Chris Kuhn and converted with his permission.
Catacombs of Death (for Poser): What lies within these ruins? Do you dare to enter? Does greatness await... or death...What's inside? Skeletons, abandoned weapons, spider webs, and maybe a mysterious monster (or two or three)...Includes tons of separate parts, which can be hidden or shown for more customization.Don't want the torches on the wall? How about the spider webs or skulls or hangman nooses? Or maybe you don't need the columns in the middle of the room. They're separate parts, so go ahead and hide them.A set of stairs leads down to the bottomless void....: Product Features :.* Poser figure file: obj, cr2/ png, with 116,844 polygonsBody parts:* Ground* Barrel* 16 Barrels* 7 Base sectoins* Basin* Bed* BigBase* Boots* 5 Candles* Casket* CasketCover* Ceiling* ChainHammer* 3 Chairs* 3 Chandeliers* ChestMetalClose* ChestMetalOpen* ChestWoodClose* ChestWoodOpen* CoffinBroken* 15 Columns* 2 Columns Old* 4 Doors* FrontWall* 3 Gallows* 7 Gates* 3 Skeletons* 3 Skulls* 3 Small Metal ChainsThe cameras were carefully designed to not be inside a wall, which means no "hide wall" poses are needed.(Though the hide poses are included since one camera angle is blocked by the Rear Wall.)- Use these to render your scenes or use them as a starting point... rotate the camera and see what else can be seen!All sales images were rendered with the included camera files.The figure shown in the images is not included, but is used to show where the position poses will place the figure.For use in Poser 5 and above; not tested in DAZ Studio.
Madam Shapoklyak (for Poser): Who is this madam? Is she a friendly witch, a scary villain, or something else? Add her to your scenes and you decide! Product Features:* Stand-alone Poser figure (obj, cr2/ png), at 146,790 polygons* All body parts are fully poseable.* Skirt model included as a dynamic prop; instructions for using this dynamic prop are included in the readme file.* Mouth and Face morphs:-Eyes Close-Evil-Grin-Kiss-Teeth Back-Teeth Up-Open Mouth-Scary-Smile Poses:-Animated pose: "duel set"-Animated pose: "tornado" Textures:* One set of textures for character, at 4096x4096 pixels.* One set of textures for the jacket, corset, dress, and cap. Original model by Moscowich80, uploaded for sale here with permission.
P.I.C.K. Ultimate (for Poser): The Poser Indoor Creation Kit, or "PICK", was designed for the accurate, realistic and flexible creation of indoor Poser scenes. The components were modeled to seamlessly integrate with each other while giving the flexibility to create the room YOU want. Modeled in exact scale with extreme accuracy in both models and textures PICK provides the "tools" needed to set up a realistic indoor scene within minutes. Whether you want a small bedroom, a large ballroom or a corridor PICK allows you to build the scene you have in mind rather than being stuck with preset sets. Almost infinite combinations allowing you to create modern home interiors or futuristic SciFi interiors.P.I.C.K. has been called the Lego(tm) set for Poser. Providing you with days, weeks and years of creative fun!  Product Features:* HTML Based User Manuals for both P.I.C.K. Base and P.I.C.K. SciFi Base.* Over 425 Modular Building Components all modeled with extreme detail.* Over 1,450 Material Presets.* All 3D Model Components are provided in Poser format: figures (cr2) and props (pp2).* Includes the following P.I.C.K. sets:- P.I.C.K. Base (48 3D Model Components)- P.I.C.K. Bath & Shower Expansion Set (12 3D Model Components)- P.I.C.K. Clocks (4 3D Model Components)- P.I.C.K. Dining Set (2 3D Model Components)- P.I.C.K. French Doors Expansion Set (3 3D Model Components)- P.I.C.K. Georgian Windows Expansion Set (14 3D Model Components)- P.I.C.K. Kitchen Expansion Set (94 3D Model Components)- P.I.C.K. Lockers Expansion Set (24 3D Model Components)- P.I.C.K. Spiral Stairs Expansion Set (30 3D Model Components)- P.I.C.K. Stairs Expansion Set (89 3D Model Components)- P.I.C.K. Wall Paneling Expansion Set (18 3D Model Components)- P.I.C.K. Windows Expansion Set (11 3D Model Components)- P.I.C.K. SciFi Base (48 3D Model Components)- P.I.C.K. SciFi Pipes and Cables (30 3D Model Components) For use in Poser 6 and above. Content originally created by, and acquired from YURDigital... and originally priced at close to $150.00.
Starship Bridge 10 (for Poser): Introducing the tenth Starship Bridge set for Poser. Designed for a more compact vessel, this bridge is significantly smaller than the previous bridges... and has less crew comforts as well. In this bridge, the captain sits above his crew.A gunner`s station behind the captain allows for direct targeting of all weapons systems. The chair mounting can rotate 360 degrees for precise aiming of all weapons systems. The front five control stations include helm control, operations, security, communications, and tactical. Product Features:* Includes Poser figure (obj, cr2, png), at 40,036 polygons. Moving Parts:* All walls (and the ceiling) can be hidden for easier camera placement.* The Captain`s Chair can rotate around (with an ERC dial on the BODY).* The Gunner`s Chair can rotate around (with an ERC dial on the BODY).* The front chair/ stools can be moved or rotated to suit the needs of your scene.* The doors at the rear of the bridge can open and close (with an ERC dial on the BODY). Textures:* One set of textures is included, at 2048x2048 pixels.* Templates are included for all materials, and some are color-coded for ease-of-use. Poses:* Hide/ show each wall and the ceiling.* Hiding and showing the rear wall hides and shows the doors. Cameras:* Eight camera files are included.* The camera files also hide any walls which may be blocking the camera. Scene File:* Includes both the Bridge 10 and lighting.* The light set in the included scene file has Ambient Occlusion enabled for the top light.-This will create additional detailing, but may increase render times. Recommended for use in Poser 5 and above, though the Ambient Occlusion lighting will only work in Poser 6 and above.
Fortress Keep Construction Set (for Poser): This pack includes 12 models for you to create your own castle, keep, or fortress. Add the pieces to scene, rotate, reposition, and render the scene! The models are low-poly enough that you can add plenty of them to the scene without overwhelming your system. Product Features:* Includes the following 12 Poser figures: (obj, cr2/ png):- Entrance, at 1,348 polygons; no moving parts.- Fortress Keep, at 2,851 polygons; no moving parts.- Fortress Steps, at 387 polygons; no moving parts.- Keep Base1, at 2,930 polygons; no moving parts.- Keep Base2, at 2,930 polygons; no moving parts.- Tower A, at 71 polygons; no moving parts.- Tower B, at 167 polygons; no moving parts.- Tower C, at 198 polygons; no moving parts.- Wall A, at 747 polygons; no moving parts.- Wall B1, at 766 polygons; the front and rear towers can be hidden or shown, but not moved.- Wall B2, at 766 polygons; the front and rear towers can be hidden or shown, but not moved.- Wall C, at 54 polygons; no moving parts. Textures:* One set of texture maps, at 4096x4096 pixels which are shared on all models.* No specular or bump maps are included. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio; although DAZ Studio may import the files, we do not use DAZ Studio and can't support any issues that may occur. Original model by Arteria3D and uploaded for sale here with full permission.
USS Excelsior (for Poser): The Excelsior-class was a type of Federation starship used by Starfleet from the late 23rd century through the late 24th century. It was the backbone of Starfleet for nearly a century, making it one of the longest serving starship designs, and one of the most recognizable ships in the fleet. This model is the NCC-2000 version, which was put into service after the NX-2000 proved itself during its shakedown cruise. Model Features:* Poser figure: obj, cr2/ png, with 1,048,254 polygons.* Not scaled to the size of the Poser/ DAZ figures.* Panel lines and other details are modelled into the mesh.* No moving parts. Textures:* Two hull texture and specular maps, at 6000x6000 pixels.* One texture map with hull coloring and the name of the ship, at 4096x4096 pixels.* The rest of the materials use Poser shaders. The detailed mesh and maps mean the model works great for close-up shots. Designed for use in Poser 6 and above and not supported in any other software. Original model by Chris Kuhn and converted with his permission.
Circus Minimus (for Poser): Originally designed as a racetrack in Roman times, chariots would race around the obelisk in the center, entertaining thousands of people.Since this race track wasn't as large as the nearby arenas, it got the Latin nickname of "circus minimus", which means "small circle". Over time, the ground was paved over, the stadium seating removed, and the area was turned into a marketplace. After that, storefronts and housing were built up around the piazza. But after all the centuries, it still retained its name from the Roman times. Although all the action takes place in the center, the backsides of the buildings have enough detail that you can use this building as part of a city scene.This model is a facade and there are no interiors and none of the doors can open. Product Features:* Poser figures: obj, cr2/ png:* Buildings, at 455,686 polygons- Separate parts which can be repositioned or hidden or shown:-- 16 chairs-- 12 tables- Each building can be hidden for easier camera placement* Obelisk, at 155,188 polygons.- Separate parts which can be hidden or shown:-- Obelisk-- Sphinx* "All", which adds the buildings and obelisk to the scene with the obelisk parented to the buildings. Textures:* One set of texture maps with corresponding normal/ bump maps.* Most textures are 2048x2048 and 4096x4096 pixels in size, though the textures for the storefront windows are about 621x1000 pixels. Cameras:* Fifteen camera files are included.- You can use these camera files to render the scene or use them as starting points. All sales images rendered in Poser Pro 2012 with the included camera presets. Designed for use in Poser 6 and above.
Medieval World Set 2 (for Poser): Build your own medieval world with this new set from Arteria3D. Includes all the buildings seen in the sales images.Mix and match these buildings with the other Medieval World buildings or the other, similar buildings also from the Arteria3D collection. Product Features:* Includes the following Poser figures: (obj, cr2/ png):- House 5, at 15,060 polygons, with no moving parts.- House 6, at 6,734 polygons, with no moving parts.- House 7, at 8,833 polygons, with no moving parts.- House 8, at 6,862 polygons, with no moving parts.- House 11, at 3,034 polygons, with no moving parts. Some buildings have interiors that can be seen through the open entrance... see if you can find them! Textures:* Texture maps with corresponding normal/ bump maps, at 2048x2048 polygons. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Medieval World Set 3 (for Poser): Build your own medieval world with this new set from Arteria3D. Includes all the buildings seen in the sales images.Mix and match these buildings with the other Medieval World buildings or the other, similar buildings also from the Arteria3D collection. Product Features:* Includes the following Poser figures: (obj, cr2/ png):- House 13, at 3,836 polygons, with no moving parts.- House 14, at 4,539 polygons, with no moving parts.- House 15, at 2,459 polygons, with no moving parts.- House 16, at 3,425 polygons, with no moving parts.- House 17, at 3,766 polygons, with no moving parts. Some buildings have interiors that can be seen through the open entrance... see if you can find them! Textures:* Texture maps with corresponding normal/ bump maps, at 2048x2048 polygons. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Medieval World Set 4 (for Poser): Build your own medieval world with this new set from Arteria3D. Includes all the buildings seen in the sales images.Mix and match these buildings with the other Medieval World buildings or the other, similar buildings also from the Arteria3D collection. Product Features:* Includes the following Poser figures: (obj, cr2/ png):- House 18, at 824 polygons, with no moving parts.- House 19, at 1,539 polygons, with no moving parts.- House 20, at 2,100 polygons. The awning is a separate part which can be hidden/ shown.- House 23, at 4,523 polygons, with no moving parts.- Spire, at 8,814 polygons, with no moving parts.- Street Lamp, at 1,456 polygons, with no moving parts. Some buildings have interiors that can be seen through the open entrance... see if you can find them! Textures:* Texture maps with corresponding normal/ bump maps, at 2048x2048 polygons. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Milk Truck (for Poser): A model of a truck typically used for carrying milk, though it can easily fit all kinds of other goods on its bed.Also includes three models to fill out your scene: a milk bottle, an empty crate, and a create full of milk bottles. Also includes the entire Vanishing Point license plate material library. Product Features:Poser figure files: obj, cr2/ png:* Milk Bottle, at 3,912 polygons.* Empty Crate, at 8,346 polygons.* Full Crate, at 86,586 polygons.- All 20 milk bottles are separate parts which can be hidden, shown, or repositioned to suit the needs of your scene.* Milk Float vehicle, at 89,949 polygons.- Left and right doors can open and close, with ERC dials on the Body.- All four wheels can rotate, with an ERC dial on the Body- Steering wheel is turnable and an ERC dial on the Body affects both the front wheels and steering wheel.- The roof can shrink to cover just the cab.* Includes 8 position poses to place the crates on the truck's rear bed. Textures:* One set of texture maps for each of the models.* Includes bump maps for the wording on the bottle and crates and on the truck's wheels. .: Material Collection Files :.* License plates:- Forty (40) designs, including US states, Canadian provinces, and Diplomat.- All designs include a corresponding displacement map to increase realism and make the license plate look 3-dimensional.- A hide/ show file for the front plate (for use on cars that have a front plate).These license plates will also work on all of the past and future Vanishing Point and Digimation cars and trucks.* All of these files are material collection files, which means you do not have to select the exact material on the model to apply them. This product is designed for use in Poser 5 and above. A version optimized for use in DAZ Studio will be available separately. All images rendered in Poser Pro 2012 Originally created by and acquired from PoserWorld.
Imperial Walls Construction Kit (for Poser): Because every scene needs a hallway.Perfect for use as a spaceship or in a base. Includes everything you need to to build your own hallways, including walls, roof, floor, and wall controls. Product Features:* Includes the following Poser figures (obj, cr2/ png):BlastDoorsWall: at 4,495 polygons; includes an opening and closing door (with an ERC dial on the Body).Control1: at 771 polygons; no moving parts.Control2: at 3,059 polygons; no moving parts.CurveWall1: at 7,009 polygons; no moving parts.CurveWall2: at 13,586 polygons; no moving parts.Floor1: at 40 polygons; no moving parts.Floor2: at 43 polygons; no moving parts.LargeDoorWall: at 43,514 polygons; includes an opening and closing door (with an ERC dial on the Body).Roof: at 204 polygons; no moving parts.SmallDoorWall: at 34,072 polygons; includes an opening and closing door (with an ERC dial on the Body).Wall1: at 34,449 polygons; no moving parts.Wall2: at 11,798 polygons; no moving parts.Wall3: at 2,989 polygons; no moving parts.Wall4: at 2,000 polygons; no moving parts.Wall5: at 985 polygons; no moving parts.* Includes three presets:Hallway with small door at the endHallway with blast door at the endVery tall walls with a floor.Short hallway angled to the right.Short hallway angled to the left. Textures:* No textures are needed.* Uses Poser`s shader nodes for some materials. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above.
Chopper C1-10P (for Poser): C1-10P appears in the animated television series Star Wars Rebels, which began airing on Disney XD in fall 2014. His appearance is directly inspired from concept artist Ralph McQuarrie`s original Episode IV design sketches for R2-D2.Features:* One Poser figure: obj, cr2/ png, with 17,656 polygons.* Scaled to the Poser people, roughly 3/4 the size of the R2 Astromech Droid.* Moving parts:- Head can rotate, with an ERC dial on the Body.- Head periscope can move up/ down (with an ERC dial on the Body) and rotate.- Side legs can rotate.- Side feet can rotate- Side wheels can extend and retract.- Middle leg can extend and retract.- Left and right "head" arms can be positioned and the claws can open and close.- The center "body" arm can be positioned and the claws can open and close.Position Poses:* Standing: body and side legs straight, wheels retracted, middle leg retracted.* Moving: body angled, side legs back, wheels out, middle leg extended.Textures:* One color scheme with texture maps.Model by Richard Duda, Poser clean-up and rigging by JHoagland.
First Order Stormtrooper Armor (M4): The First Order Stormtrooper Armor from Star Wars: The Force Awakens for use with M4.Includes the following parented props:* Full body armor, 15 separate pieces, for a total of 50,052 polygons.* Helmet, at 32,618 polygons.* Blaster rifle, at 40,890 polygons; includes 2 versions:- Parented to the right hand, so your character can hold the gun.- Not parented, so you can have extra guns in the scene.* Does not include boots.Two material collection files for the armor and helmet:* White* Black/ "Chrome Trooper"* One material collection file to turn your M4 character`s body parts black.- You could also use a body suit instead of re-coloring your M4 charactersCreated and tested in Poser; has not been tested in DAZ Studio (but should probably work fine).Model by Richard Duda, clean-up by JHoagland.Images rendered in Poser Pro 2012 with Indirect Lighting (IDL).
F42U Privateer (for Poser): 1946, Guadalcanal. With the war dragging on, the Allied forces look to maintain a technologically superior edge. With a stalemate on land and at sea, and the rise of Aircraft like the Pfeil in Germany, and the Shinden in Japan, the US also looks to improved aircraft for it's embattled forces. Features:Numerous conforming extras and over 50 ERC controls for the various parts of the aircraft to allow for maximum usability. Controls include some standard combat maneuvers as well as individual controls for the various moving parts on the aircraft. The model also features a fully detailed interior with working flight controls that are tied by ERC to the flight surfaces and moving parts of the aircraft. Also included are Optional Weapons Sets, a Dummy Pilot, Crew Boarding Ladder, and conforming Prop-Blur effect figures. Included conforming figure add-ons:1 conforming external "drop-tank" fuel tank is included. This "drop-tank" conforms to the Privateer and is individually pose-able so that the user can make it fall away and tumble as it drops, with ERC dials for ease of use. 1 set of 2 conforming 500lb bombs, with ERC dials for ease of use. 1 set of 6 conforming RP-3 individually pose-able rockets, with ERC dials for ease of use. 1 pair of conforming 250lb bombs that can be individually posed, with ERC dials for ease of use. 1 set of conforming "prop-blur" effects props for the propellers of the aircraft to give a sense of motion in flight. 1 conforming "dummy" pilot figure (this figure is non-pose-able and doesn't not contain any joints or bones. This figure is low poly but is provided so that you can have a crew in the aircraft for your renders without needing to use the fully rigged figures). Original model by, and acquired, from Chris Schell, and now owned by VanishingPoint.
MiG-19 Farmer C (for Poser): The MiG-19 Farmer C (based on a modification of the MiG-17 design) was a mediocre aircraft at it's best, but was the very first Soviet aircraft to be able to break the Sound Barrier in level flight (the MiG-15 and 17 were both subsonic, breaking the sound barrier only in a powered, and potentially dangerous, dive). Unfortunately the MiG-19 was prone to major mechanical issues, and also engine fires (due to overheating of a central fuel tank located between the engines). It also suffered from sudden pitch-up when the air-brakes were deployed, engine stalls and flame-outs with sudden throttle changes, and high landing speeds... Additionally, its conventional tail-plane assembly lacked authority (control) at supersonic speed... Here are some of the Highlights:* Over 50 Points of Articulation on the main figure!* Moving Flaps, Ailerons, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seat...* Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation!* Conforming Dummy Aircrew figure to use to place a Pilot in the Cockpit.* Conforming Crew Boarding Ladder and FOD Storage Covers for the Engine and Air Intake.* 7 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the MiG-19 Farmer, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing large variations of weapons loads that can be added based on mission requirements! No additional files will be needed to use this product... it is a stand-alone figure! Original model by Chris Schell and uploaded for sale here with permission.
Gas Grills (for Poser): Two gas grills for all of your cookouts! Perfect for starting your summer grilling or ending the summer with a BBQ... or cooking anytime in between.Both models include an opening top and a propane tank that can be hidden or shown. Product Features:* Two Poser figures: obj, cr2/ png:- Gas Grill 1, at 48,790 polygons-- The top can open and close, with a Pose Control dial on the body.- Gas Grill 2, at 53,022 polygons-- The top can open and close, with a Pose Control dial on the body.-- The front door can open and close, with a Pose Control dial on the body.-- The left and right shelves can slide in and out, with a Pose Control dial on the body. Textures:* One texture scheme.* Some materials, such as the metal, use Poser shaders. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Future Now Train Station (for Poser): A futuristic themed train station, perfect for any sci-fi scenes. Three transit tubes help keep people moving, whether it's by futuristic train, mag-lev, or a moving walkway. Escalators on both sides of the tubes give people easy access to the tubes. And of course, the always-present advertising is here, in the form of large billboards running down the sides of the station. Product Features:* Poser figure: obj, cr2/ png, with 20,066 polygons.* Does not include any moving parts. Poses:* Hide/ show Front, Left, Rear, and Right Walls, and the three tubes. Cameras:* 12 camera files are included.* The camera files also hide any walls which may be blocking the camera. Textures:* One set of texture maps:- Five "Signs" texture maps at 4096x4096 pixels.- Two "station" texture maps at 4096x4096 pixels.- "Tile floor" texture map at 2048x2048 pixels. All sales images rendered in Poser Pro 2012 using the included camera files. This product is designed for use in Poser 5 and above.
Volvo V40 2000 (for Poser): The Volvo V40 is a small family car, available in five-door hatchback form. It is built on the modified Ford C1 platform which was used by the Volvo C30, S40, V50, and C70 models with modifications to the electric power steering, and revised spring and damper settings. This digital model is based on the 2000 version of the Volvo V40. Product Features:* Poser figure file: obj, cr2/ png, with 142,864 polygons.* Digitally scanned from the actual car, which gives the digital model an incredible amount of detail:- Switches and dials on the dashboard.- Switches and door handle on the doors.- Full trunk interior.* All four doors can open and close, with ERC dials on the Body for each one.* An ERC dial on the BODY rotates all four wheels.* Steering wheel is turnable and an ERC dial on the Body affects both the front wheels and steering wheel.* The trunk can open and close, with an ERC dial on the Body.* Two levers on the steering column can move up and down.* The front seats seats move front-to-back.* The front hood does not open and there is no engine. Textures:* Textures for the instrument panel, wheels, and logos are included.* The rest of the materials use Poser shaders, such as fabric, reflection, etc. Material Collection Files:* Body Metal:- One hundred sixty (160) material files:- Twenty (20) colors with eight (8) variations of each color.These material files will also work on all of the past and future Vanishing Point and Digimation cars and trucks.* License plates:- Forty (40) designs, including US states, Canadian provinces, and Diplomat.- All designs include a corresponding displacement map to increase realism and make the license plate look 3-dimensional.- A hide/ show file for the front plate (for use on cars that have a front plate).These license plates will also work on all of the past and future Vanishing Point and Digimation cars and trucks.* All of these files are material collection files, which means you do not have to select the exact material on the model to apply them. This product is designed for use in Poser 5 and above. Original model by Digimation, uploaded for sale here with permission.
Canal Town (for Poser): Inspired by the architecture and canals of Venice comes this town built on 6 islands separated by canals. Includes six islands with buildings, four bridges, five docks, and even three gondolas.All of the buildings and bridges are separate parts which can be hidden or shown to further customize the look of your scene.Note that the gondolas are for decoration only and may look a little low-res when viewed up close. The buildings include courtyards for further exploring. The water plane uses its own material so you can easily use your own texture or replace it with a water shader. Or adjust the bump map strength to create larger or smaller waves.And the water plane goes through the buildings and can be moved up and down, making it perfect for flooding your town! You can create a larger city by adding another copy of the model to your scene, then rotating it and moving it into position. Product Features:* Poser figure: obj, cr2/ png, with 164,143 polygons.* Separate parts which can be hidden or shown:- 6 Islands with buildings- 4 Bridges- 5 Docks- 3 Gondolas, which can also be repositioned in the scene (translation dials are enabled)- Water can be raised or lowered and the gondolas will stay on top of the water Textures:* One set of 87 texture maps with corresponding normal/ bump maps.* Most textures are 2048x2048 and 4096x4096 pixels in size.* Uses Poser's shader nodes, such as reflect and refract. Cameras:* Fifteen camera files are included.- You can use these camera files to render the scene or use them as starting points. All sales images rendered in Poser Pro 2012 with a second model rotated behind the main model. Designed for use in Poser 6 and above.
Sci-Fi Airlock (for Poser): Use this set of hallways and airlocks to get your crewmembers from your ship (or space station) to another docked spacecraft. The three center airlock sections can be hidden for more versatility and the three circular hatches can rotate open. The small door at the end of the airlock hallways can open, though there is no hallway on the other side.When opening this door, please make sure your spaceship is securely attached to the airlock. The hallways and ceiling are divided into two sections for easier camera placement. This set includes everything shown in the images. (People are not shown in the images since they're not included in this set.) Product Features:* Includes one Poser figure (obj, cr2/ png), at 191,923 polygons. Moving Parts:* Like our other sets, all walls (and the ceiling) can be hidden for easier camera placement.* All three round hatches can rotate/ open (with an ERC dial on the BODY).* The rear airlock door can open side-to-side (with an ERC dial on the BODY). Textures:* One set of textures is included.* This model uses Poser`s shader nodes for some materials. Poses:* Hide/ show each wall segment and the corresponding ceiling.* Hiding and showing the center "airlock" sections will hide the corresponding circular hatches. Cameras:* Twelve camera files are included.* The camera files also hide any walls which may be blocking the camera.- Use these to render your scene or as a starting point.* All of the sales images were created using the included camera files. Recommended for use in Poser 5 and above.
Tracer Effects (for Poser): A set of simple effects props to create the Muzzle Flash and Tracer Streams from weapons fire. The set includes a Muzzle Flash Prop, a straight line of Tracers, and an Arc of Tracers (to simulate aircraft maneuvers and gravity). The Tracer groups can be used separately or combined for special effects use. Suitable for use with Aircraft, Mecha, or Hand-held Weapons (some manual scale adjustments will be needed to use these with human sized weapons)! Notes:There are 2 versions of each item included, 1 for DAZ Studio and 1 for Poser, both in pp2 format, each with specific materials for each program. Original model by Chris Schell and uploaded here with permission.
Shanty Town Buildings 2: Set 4 (for Poser): The fourth set of buildings to build your own town and village. Includes 4 models which also work nicely with the other Shanty 2 Building Sets and the Shanty 2 Town Blocks. Some buildings have moving parts, such as doors and shelves which can be opened and closed, some buildings have stools which can be repositioned, and some buildings have a ceiling and walls which can be hidden or shown.Does not include a terrain or ground. Product Features:* Includes the following Poser figures: (obj. cr2/ png):set4:- Building P, at 216 polygons. Includes a ceiling and 4 walls.- Building Q, at 195 polygons. Includes a ground-floor visible interior but no moving parts.- Building R, at 255 polygons. Includes an opening and closing door (with a pose dial on the Body), ceiling and 4 walls.- Building S: at 326 polygons; no moving parts and no interior. Textures:* One set of texture maps, at 4096x4096 pixels with corresponding normal/ bump maps, for each building. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Bus AEC London (for Poser): The London Bus is one of London's principal icons, the archetypal red rear-entrance double-deck Routemaster being recognised world-wide. From the early days of motor bus operation by the LGOC (London General Omnibus Company) in the 1900s until the 1960s London went its own way, designing its own vehicles specially for London use rather than using the bus manufacturers' standard products used elsewhere. The Associated Equipment Company (AEC) was created as a subsidiary of the LGOC in 1912 to build buses and other equipment for its parent company, and continued in the ownership of LGOC and its successors until 1962. Many of London's local service buses over this period were built by AEC, although other manufacturers also built buses to London designs, or modified their own designs for use in London. The last bus specifically designed for London was the AEC Routemaster, built between 1956 and 1968. Since then, buses built for London's local services have all been variants of models built for general use elsewhere. Since the turn of the Millennium, there has been a shift to low-floor double-deck and articulated buses. Go topless! The top of this model is a separate body part which can be hidden or shown using Poser`s Hierarchy Editor (or the included hide/ show pose). Product Features:* All four tires can rotate around.* Front tires are steerable.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel.* Top can be hidden or shown. Textures:* Includes two color schemes: Red and Blue* Most of the materials use complex mapping and no templates are included. Poses:* Hide/ show pose for the top.* MAT poses for the body color: Red and Blue For use in Poser 5 and above: this model uses advanced materials such as ray-traced reflections. Original model by Digimation Model Bank, sold here with full permission.
Starship Bridge 16 (for Poser): Another addition to the science-fiction bridge set collection! As usual, the captain sits in the middle of the bridge, overseeing the crew.The stand-up rear stations can be reconfigured to display any of the ship`s functions.Four sit-down stations allow crew members to monitor the ship status for engineering, science, communications, and tactical.Multiple doors in the front and rear allow easy access to and from the bridge. Product Features:* Poser figure file (obj, cr2/ png), with 92,877 polygons.* The helm, ops, and outer chairs are separate parts which can be rotated or repositioned in the scene.* The captain's chair can rotate with a Pose Control dial on the Body.* All of the walls can be hidden or shown to suit the needs of your scene.* All of the doors can open and close with Pose Controls dials on the Body.- Although the doors can open, there are no corridors behind the doors. We recommend using one of the many corridor sets, for sale here, for background hallways. Textures:* One texture scheme with texture, bump, and transparency maps. Hide/ Show Presets:* Hide/ show each wall and the ceiling.- Hiding and showing the each wall hides and shows the corresponding doors. Cameras:* Sixteen camera files are included.* The camera files also hide any walls which may be blocking the camera.- You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software.
Ju-287-G/1 Staghund (for Poser): 1946, France. With the war dragging on, the Luftwaffe looks to maintain a technologically superior edge over a quickly expanding enemy. With a stalemate on land and at sea, and the rise of Aircraft like the Pfeil as the fighters of the future, the Luftwaffe continues to explore advance replacements for it's aging and out-dated air fleet. Numerous conforming extras and over 50 ERC controls for the various parts of the aircraft to allow for maximum usability. Controls include some standard combat maneuvers as well as individual controls for the various moving parts on the aircraft. The model also features a fully detailed interior with working flight controls that are tied by ERC to the flight surfaces and moving parts of the aircraft. Also included are Optional Weapons Sets, a Dummy Pilot, Crew Boarding Ladder, and conforming Prop-Blur effect figures. Included conforming figure add-ons:* 1 conforming external "drop-tank" fuel tank is included. The "droptank" is individually pose able so that the user can make it fall away and tumble as it drops, and includes ERC dials for ease of use.* 1 conforming 251kg (551lb) bomb and sling mounting with ERC dials to lower the sling and release the bomb.* 1 set of conforming 37mm anti-tank cannon.* 1 set of conforming "prop-blur" effects props for the propellers of the aircraft to give a sense of motion in flight* 1 set of conforming "dummy" pilot figures (these figures are non-pose-able and don't contain any joints or bones, they are also low poly but are provided so that you can have a crew in the aircraft for your renders without needing to use the fully rigged figures)* 1 pose-able Crew Boarding Ladder for use in scenes. Product created by, and acquired from, Chris Schell, and is now owned by VanishingPoint.
Starship Bridge 15 (for Poser): Continuing the tradition of other command centers, this bridge set follows the design of captain, helm/ ops in the center with a ring of workstations around the exterior. The workstations include: communications, engineering, science 1, science 2, and two mission-specific stations, ranging from damage control to tactical displays. Product Features:* Poser figures (obj, cr2, png), at approx 110,269 polygons Bridge Features:* As is usual for our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* The captain`s chair can rotate around (with an ERC dial on the BODY).* The helm and ops chairs can rotate around (with an ERC dial on the BODY).* The two front doors can open and close (with an ERC dial on the BODY).* The rear lift door can open and close (with an ERC dial on the BODY).* The captain`s chair can not move or rotate.* ALL of the chairs are separate parts, which can be rotated or re-positioned to suit the needs of your scene. Textures:* One color scheme for all the monitor displays is included.* Templates are included. Poses:* Hide/ show each wall and the ceiling.* Hiding or showing a wall will hide and show the corresponding set of doors. Cameras:* Thirteen camera files are included.* The camera files also hide any walls which may be blocking the camera.You can use these camera angles to render scenes or use them as a starting point and adjust them as needed. Scene File:* Includes a separate scene files for the Bridge 15.* The light set in the included scene file has Ambient Occlusion enabled for the top light.-This will create additional detailing, but may increase render times. Recommended for use in Poser 5 and above, though the Ambient Occlusion lighting will only work in Poser 6 and above. Uses texture maps and bump maps and Poser shader nodes, such as FBM and Reflection. All images were rendered in Poser Pro 2010 with the included camera files.
Medieval Ruins Set 2 (for Poser): A set of medieval-style ruins. What`s in these castle ruins or the wrecked doorways or the destroyed walls? It`s up to you!Also works great for military scenes. Product Features:* Set 2: 9 Poser figures: obj, cr2/ png:Medieval Ruin 08 DB4, with 15,905 polygons; no moving parts.Medieval Ruin 08 DB7, with 9,568 polygons; no moving parts.Medieval Ruin 09 M3, with 6,920 polygons; no moving parts.Medieval Ruin 09 M3A, with 11,386 polygons; includes an opening door, with a Pose Control dial on the Body.Medieval Ruin 09 M3B, with 7,898 polygons; no moving parts.Medieval Ruin 09 M4, with 8,980 polygons; includes an opening door, with a Pose Control dial on the Body.Medieval Ruin 10 F1, with 10,469 polygons; no moving parts. Includes a water plane, which can easily be recolored.Medieval Ruin 10 F2, with 16,150 polygons; no moving parts. Includes a water plane, which can easily be recolored.Medieval Ruin 10 F3, with polygons; no moving parts. Includes a water plane, which can easily be recolored. Textures:* One set of texture maps for each model, with corresponding normal/ bump maps, at 1024x1024 pixels. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software.
Shanty Town Buildings 2: Set 1 (for Poser): The first set of buildings to build your own town and village. Includes 4 models which also work nicely with the other Shanty 2 Building Sets and the Shanty 2 Town Blocks. Some buildings have moving parts, such as doors and shelves which can be opened and closed, some buildings have stools which can be repositioned, and some buildings have a ceiling and walls which can be hidden or shown.Does not include a terrain or ground. Product Features:* Includes the following Poser figures: (obj. cr2/ png):- Building A, at 641 polygons. Includes a ground-floor visible interior but no moving parts.- Building B, at 104 polygons; no moving parts and no interior.- Building C, at 429 polygons. Includes a ground-floor visible interior but no moving parts.- Building D, at 138 polygons; no moving parts and no interior. Textures:* One set of texture maps, at 4096x4096 pixels with corresponding normal/ bump maps, for each building. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Aircraft Interior (for Poser): A modular aircraft interior with two seats on the left and two seats on the right. The left and right walls and ceiling can be hidden or shown, for easier camera placement.The right and left seats can recline, though please don't hit the passengers sitting behind you.Tray tables on each seat can open and close, but make sure they are in the upright position for take off and landing. A curtain is included to keep the commoners in business class from coming into first class or to keep the riff-raff in coach class out of business and first class.You can also use the curtain as an end to your aircraft. You can add more interior sections to the scene to extend the length of the aircraft. Position poses are included to align each segment next to each other. Note: doors and seat-back entertainment is not included. Product Features:* Two Poser figures: obj, cr2/ png- Interior, with 153,449 polygons. Also includes an exterior so you can make images looking into the aircraft.- Curtain, with 750 polygons (no moving parts). Interior: Moving Parts:* Left and right walls can be hidden or shown.* Ceiling can be hidden or shown.* Two sets of curtains on the left and right walls can move front-to-back and cover the window, with an ERC dial on the Body.* Left and right seat sections can move forward and back.* Left and right chair backs can recline, with an ERC dial on the Body.* Left and right tray tables can open and close, with an ERC dial on the Body.* The seat belts can be hidden or shown.* The under-seat life jackets can be hidden or shown.Includes position poses so you can quickly build an entire interior. Hide/ Show Poses:* Ceiling* Left Seats* Right Seats* Left Life Jackets* Right Life Jackets* Left Seat Belts* Right Seat Belts* Left Curtains* Right CurtainsUse these to further customize your interior. Textures:* One set of textures and bump maps for the interior materials included.* Six textures (at 2048x2048 pixels) for the exterior are included. This product is designed for use in Poser 5 and above. A version optimized for use in DAZ Studio is available separately. Originally created by and acquired from PoserWorld.
Comanche RAH-66 Helicopter (for Poser): The RAH-66 Comanche was an advanced five-blade armed reconnaissance and attack helicopter designed for the United States Army. The RAH-66 program was canceled in 2004, before mass production began, after nearly $7 billion was spent on the program.Product Features:* Poser figure (obj, cr2/ png): 62,214 polygons* Upper blades can rotate (with an ERC dial on the BODY).* Rear blades can rotate (with an ERC dial on the BODY).* All four doors can open and close (with an ERC dial on the BODY).* The front machine gun and aiming turret can rotate (with an ERC dial on the BODY which affects both).* Blade Blur: replace the upper and rear blades with a blurred prop to simulate the spinning of the blades.The Blade Blur is built into the helicopter model`s geometry so there`s no need to load a separate prop from the props folder.* All 4 right missiles and all 4 left missiles (under the wings) are separate body parts, which can be repositioned to suit your scene. (The trans and rotate dials are visible.)* All 3 right rockets and all 3 left rockets (in the rocket pods) are separate body parts, which can be repositioned to suit your scene. (The trans and rotate dials are visible.)* The front and rear sticks and front and rear yokes are separate body parts which can be posed.* Wheels can rotate (with an ERC dial on the BODY).Pose Files:* Hide upper blades and show upper blade blur* Show upper blades and hide upper blade blur* Hide rear blades and show rear blade blur* Show rear blades and hide rear blade blur* Hide/ show landing gear, which also hides/ shows the wheels.* Hide/ show wings, which also hides/ shows the missiles.Textures:* One texture scheme, ranging from 2048x568 to 1024x1024.* "Rivet" bump map included for the fuselage and canopy.* Tire tread bump map included for the wheels.* All 8 missiles use their own material for further customizing.* Templates are included.For use in Poser 5 and above. Has not been tested in DAZ Studio.Note: The pilot figures shown in the images are not included.
Shuttle Type Zero (for Poser): This shuttle is designed to take the crew from the ship to another location.The pilot can steer the ship from the forward chair while another 6 people can sit in the other chairs.You can also remove the chairs for more storage space. Product Features:* Poser figure: obj, cr2/ png, with 88,287 polygons.* The spherical monitor above the helm console can rotate, with a Pose Control on the Body.* The left and right doors can open and close, with Pose Control dials on the Body.* The landing gear on the nacelles can raise and lower, with a Pose Control on the Body.* The rear landing gear is a separate part which can be hidden or shown.* All of the chairs are separate parts which can be rotated, repositioned, or hidden or shown.- The tops of the chairs can rotate front to back.* The left and right engine blades in the nacelles can rotate, with a Pose Control on the Body. Textures:* Three texture schemes with material files to apply them:- Blue- Green (default)- Red* One set of texture maps. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software.
USS Enterprise 1701-C (for Poser): The USS Enterprise (NCC-1701-C) was a 24th century Federation Ambassador-class starship operated by Starfleet. It was the fourth Federation starship to bear the name Enterprise. In 2344, Captain Rachel Garrett served as the ship's commanding officer. Model Features:* Poser figure: obj, cr2/ png, with a highly detailed mesh, at 594,248 polygons.* Not scaled to the size of the Poser/ DAZ figures.* Panel lines and other details are modelled into the mesh.* No moving parts.* A basic interior with a detailed texture map can be seen through the windows. Textures:* One texture map with hull coloring and the name of the ship, at 6000x6000 pixels.* One texture map for the interior, at 1116x1118 pixels.* Signage texture map, at 406x4096 pixels.* The rest of the materials use Poser shaders. Designed for use in Poser 6 and above and not supported in any other software. Original model by Chris Kuhn and converted with his permission.
Solinoid Math-Rai (Night Moth) (for Poser): It was long suspected that the Solinoids had advanced reconnaissance of our solar system and military defenses, but until recently UN Forces had no evidence of how this intelligence was gathered. During an ambush in the near-Mars asteroid belt, UN Forces discovered a new type of Solinoid Fighter. This new craft appeared in-armed and seems to have functioned as a Forward Controller or Recon Craft for the Solinoids engaged in the ambush. Code-named "Night Moth", the remains of this craft are under evaluation by UN Protectorate Command. Product Features:* Poser figure: obj, cr2/ png, with 118,837 polygons.* Includes one Poser figure which can transform into 2 modes: aircraft and mecha.* Over 75 Points of Articulation on the main figure!* Moving Flaps, Ailerons, Rudders, Opening Landing Gear Doors, Raising and Lowering Gear, Turning Wheels, Opening Canopies, Deployable slats, fully independently controllable missiles, and much more...* Separate Conforming Figure Weapons and Ordinance, with fully controllable ordinance deployment. (Some sold as separate packs)* Numerous Independent ERC controls on the main figure for complete control of most vital functions from 1 location.* Independent ERC controls for each flap, rudder, aileron, wing, and canopy.* Articulated Landing gear with co-ordinated ERC for 1 dial raise and lower.* ERC weapons controls for launching and steer-able missiles and ordinance.* ERC dials for easy transformation!* Pre-Posed Poses for Fighter configuration and Mecha Configuration. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Futuristic Hallways (for Poser): This is a set of hallways for all your sci-fi artwork needs. Render scenes with people walking up and down the halls or connect this set to similar sci-fi sets to build your own spaceship or base.Includes a long hallway and 3 side hallways.A lift is located at the end of the center hallway and a holographic simulation room is located at one end of the main hallway. Product Features:* Poser figure: obj, cr2/ png, with 46,228 polygons.* All of the walls can be hidden or shown to suit the needs of your scene.* All of the doors can open and close with Pose Controls dials on the Body.- Although the doors can open, there are no corridors behind the doors.- You can either position this hallway model so it connects to another room or add a copy of the hallways to your scene and align the doors with that model. Textures:* One set of texture maps.* All 18 wall monitors use "maximized" mapping so you can use your own texture maps as needed.- Six different wall monitor designs and one "screen off" texture maps are included. Hide/ Show Presets:* Hide/ show each wall and the ceiling.- Hiding and showing each wall hides and shows the corresponding doors. Cameras:* Eleven camera files are included.* The cameras have been positioned so no walls will block the camera.- You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software.
Balcony Bathroom (for Poser): This is a relaxing bathroom with a balcony overlooking the city or countryside.A bathtub in the center of the room will let your characters relax in style. Product Features:* Poser figure: obj, cr2/ png, with 47,213 polygons.* Includes the following parts which can be repositioned, hidden, or shown.- Backdrop can rotate to accommodate various camera angles- Water plane can move up and down, with a Pose Control dial on the Body.- Table with cushion- 5 Pillows Textures:* One texture scheme.* Some materials, such as metal and water use Poser shaders.* The backdrop uses maximized texture mapping, which means you can use any image as your background. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Hallways XI (for Poser): This is a set of futuristic curved hallways for your sci-fi scenes. Includes a T-shaped corridor with doors at the left, right, and rear. Also includes all stations which you can add to your scene as needed. Product Features:* Includes the following Poser figures (obj, cr2/ png):- Hallway, at 217,161 polygons.- End Station, at 1,523 polygons.- Stand-up Station, at 1,122 polygons.- Hall Stand, at 2,205 polygons. Also includes a Hallway with the End Station and 2 stand-up stations already in place. Hallway Moving Parts:* Like our other sets, all walls (and the ceiling) can be hidden for easier camera placement.* The two sets of left and right doors can open and close, with an ERC dial on the Body.* The rear doors can open and close, with an ERC dial on the Body. The other models do not include any moving parts. Textures:* One set of textures is included.* This model uses Poser`s shader nodes (such as reflection) for some materials.* All of the monitor screens use their own texture map, which makes it easy to change the screens and customize the room to suit the needs of your scene. Poses:* Hide/ show each wall and the ceiling sections.* Hiding and showing the left arch hides and shows the left doors, hiding the right arch hides and shows the right doors.. Cameras:* Seven camera files are included.* The camera files also hide any walls which may be blocking the camera.* All of the sales images were created using the included camera files. All images rendered in Poser Pro 2012.People not included.
USS Trigger (for Poser): The United States Navy Gato class submarine formed the core of the submarine service that was largely responsible for the destruction of the Japanese merchant marine and a large portion of the Imperial Japanese Navy in World War II. Named after the first vessel of this design, USS Gato (SS-212), the Gato class and its successors, the Balao and Tench classes, formed the majority of the United States Navy's WWII submarine fleet. Gato's name comes from a species of small cat shark. Like most other U.S. Navy submarines of the period, the Gato class were given the names of marine creatures. Once they began to arrive in theater in large numbers in mid-to-late 1942, the Gatos were in the thick of the fight against the Japanese. Many of these boats racked up impressive war records. Flasher, Rasher and Barb were the top three scoring boats in terms of tonnage sunk by US submarines. Silversides, Flasher, and Wahoo were 3rd, 4th, and 7th place on the list for the number of ships sunk. Gato-class boats sank three Japanese submarines: I-29, I-168 and I-351; while only losing one in exchange, USS Corvina to I-176. Product Features:* Includes three Poser figures: obj, cr2/ png- USS Trigger- Mk14 Steam Torpedo- Mk18 Electric Torpedo 1) The Anchors on this figure can be made invisible by changing them to invisible in your parameters tab after selecting them from the skeleton list in your scene tree. 2) Some locations have only one joint edited, unused joints/parameters have been hidden and are un-needed, and other locations have had limits applied to represent the mechanical nature of the ship, In your Scene Tree, look for the parameters marked "Elevate, Train, Swing, Spin, and Swivel" to pose the various parts of the ship. Guns, Cranes, Turrets and even the Spotlights and Propellers are pose able in this model! 3) All pose able parts can be found in the scene tree for the skeleton list of the USS Trigger (I've rigged the parts rather than using morphs for better all-round versatility). This includes some 30 moving parts including fully functional torpedo tube doors! Original model by Chris Schell and uploaded for sale here with permission.
Henry Robot (for Poser): What is this robot? Is he friend or foe... or something worse?Use your imagination and turn him into the henchman for your evil villain. Or maybe he's a converted robot working with the good guys. Also includes a few poses to get you started. Product Features:* Poser figure: obj, cr2/ png, with 272,358 polygons.- Fully rigged with pose-able legs, arms, and fingers.* The left and right hands use the standard Poser names, which means the Left and Right Hand cameras focus on the hands. Position Poses:* Default* Leap Left* Leap Right* Point Left* Point Right* Run Left* Run Right* Squat Left* Squat Right Textures: One metallic texture scheme, at 814x1380, with corresponding normal bump maps. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
USS Tennessee Add-on Set: A set of Smart-parented Canvas Tropical Covers, a Low-poly Deck Crew set, and a Smart-parented Flag for the USS Tennessee. These items are designed to load automatically parented in place on the main USS Tennessee figure! Requires the purchase and installation of the USS Tennessee for Poser.
USS Maryland Alternate Textures: A set of MAT poses in Pz2 format to represent the USS Maryland and USS West Virginia as they appeared in 1941 at Pearl Harbour. Also included is an alternate texture set for the USS Colorado and a MAT pose to restore the Maryland to the default textures! Requires the purchase and installation of the USS Maryland for Poser.
USS Navajo Add-On Set: A set of Smart-parented Canvas Tropical Covers, a Low-poly Deck Crew set, and a Smart-parented Flag for the USS Navajo. Requires the purchase and installation of the USS Navajo for Poser.
Elementalist (V4) (for Poser): Cast a spell with this fantasy outfit. Perfect for use for good spells or casting evil curses.This outfit includes multiple parts, which makes it easy to customize. Or combine it with other outfits for a completely different look. Product Features:* Poser figures: obj, cr2/ png:- Belt, at 333 polygons.- Boots, at 4,562 polygons.- Costume, at 11,535 polygons.The cape parts includes ERC dials for Twist All, Side to Side All, and Bend All.The hood is designed to cover the head and can not be lowered.- Sash, at 216 polygons.The dress includes the usual morphs to fit your V4 character. Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Textures/ MAT Poses:* One set of texture and normal bump maps, at 4096x4096 pixels. Requires the previous download and installation of Victoria 4 (V4) from DAZ.All images rendered in Poser Pro 2012. And a special thanks to Phil C for his help with rigging the cape.
HMS Hood (for Poser): Construction of the Hood was initially ordered in 1916, but was delayed when the Battle of Jutland brought serious problems with Battle-Cruiser design to light. Redesigned after the battle, Hood was to have been the biggest and most powerful Battle-Cruiser ever built... but sadly by 1918 when she put to sea she was very outdated and her sister ships of the class (3 more ships of this design) were broken up on the slips or cancelled. HMS Hood was sunk in the North Atlantic, May 24th/ 1941 when she and the Prince of Whales engaged the Bismark, during the Battle of Denmark Strait. A shell from the Bizmark`s guns passed through her lightly armoured decks, penetrated the aft powder magazines, ignited her 4inch powder stores, and led to a detonation that disintegrated the stern 3rd of the ship! Of 1418 Crew and Officers on board, there were only 3 survivors, but her loss became a rallying cry for the her nation and the Royal Navy. Product Features:* HMS Hood comes with over 70 moving parts, including: guns, cranes, turrets, spotlights, and propellers.* 3 smart-propped anchors Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Tropical Pack: Plants (for Poser): Perfect for adding plants to your scene, this set includes 12 flowers, 2 clumps of grass, and 1 hanging plant. Product Features:* Includes the following 12 Poser figures: (obj, cr2/ png):- Flower1, at 1,516 polygons.- Flower1B, at 1,523 polygons.- Flower1C, at 2,006 polygons.- Flower1D, at 1,187 polygons.- Flower1E, at 2,321 polygons.- Flower2, at 612 polygons.- Flower3, at 1,559 polygons.- Flower4, at 1,548 polygons.- Flower5, at 767 polygons.- Flower6, at 1,808 polygons.- Flower7, at 793 polygons.- Flower7B, at 930 polygons.- Tropical Grass: single clump, at 102 polygons.- Tropical Grass1: larger clump, at 6,120 polygons.- Wall Plant, at 1,232 polygons. done: render Textures:* One set of texture and transparency maps, at 2048x2048 pixels, for each model.* The grass and wall plant include texture and transparency maps at 512x512 and 1024x1024 pixels. This product is designed for use in Poser 5 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Sonic Boom Effect (for Poser): A simple UV Mapped prop in PP2 format, with custom textures and transmaps to create the shock-waves and condensation effects of an aircraft breaking the sound barrier. Simply load as needed, position, and manually parent the prop to the aircraft. Includes obj, pp2/ png for Poser and a DAZ Studio friendly version. Original model by Chris Schell and uploaded here with permission.
Drege Robo (for Poser): A robot mech from the far future... or from a technologically-advanced past.Shaped like a lion, this robot can run or pounce on enemy forces... or patrol a defensive perimeter- it`s to you! Product Features:* Poser figure: obj, cr2/ png, with 24,427 polygons.* Head can raise up and down.* Jaw can open and close, with an ERC dial on the Body.* All 4 legs are poseable.* Tail sections are poseable, with an ERC dial on the Body to bend the tail sections.* One texture map, at 2048x2048 pixels. Original model created by Moscowich80. Uploaded for sale here with her full permission.
Grilled Food (for Poser): This is a set of 8 food items found a typical cook-out or barbeque. It includes a little something for every taste: chicken, beef, fish, and even some veggies.Works great in a restaurant settings or a fancy dinner at home or even on a grill. Product Features:* Poser figures: obj, cr2/ png:- Green Beans, at 3,390 polygons.- Grilled Chicken, at 7,533 polygons.- Grilled Fish, at 347 polygons.- Grilled Porkchop, at 4,849 polygons.- NY Strip Steak, at 5,910 polygons.- Salmon Fillet, at 7,357 polygons.- Scallops And Bacon, at 13,997 polygons.- Small Cooked Potatoes, at 1,452 polygons.* These models do not include any moving parts. Textures:* One set of textures and bump maps for each model.* No shaders used on these models. All sales images rendered in Poser Pro 2012.Shown with the Cozy Restaurant and Gas Grills, available separately. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Starship Observation Lounge (for Poser): Located on the front edge of the underside of the starship is the crew lounge. Here, they can relax from their shift and socialize with other crewmembers or simply look out the main windows. The room is large enough for 4 tables and 16 chairs side-by-side.Two couches on the side also provide a scenic view through the window.Five bar chairs allow seating at the bar area. Product Features:* Includes five Poser figures (obj, cr2/ png):- Starship Observation Lounge Room, at approx 47,278 polygons.- Bar Chair, at approx 1,900 polygons.- Chair, at approx 1,658 polygons.- Table A, at approx 2,182 polygons.- Table B, at approx 533 polygons.* As is usual for our sets, all walls (and the ceiling) can be hidden for easier camera placement.* The left and right doors can open and close, with an ERC dial on the Body.* There is a small, curved corridor behind the doors, but there is no hallway beyond that.* The chairs and tables do not have any moving parts. Textures:* One color scheme is included. Poses:* Hide/ show poses for each wall, the ceiling, and the bar. Cameras:* Thirteen camera files are included.* The camera files also hide any walls which may be blocking the camera.You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. Designed for use in Poser 5 and above. All images rendered in Poser Pro using a combination of lights and Indirect Lighting (IDL).All images rendered using the included camera presets.
YF-35 Warthog LEO Armor Set (for Poser): Introducing a weapons add-on for the YF-35 Warthog VGF: Product Features:* Parented Props:- Booster Pack- Leg Pod Left- Leg Pod Right- Nose Pod- Wing Pod Left- Wing Pod Right * MAT poses:- LEO Booster- Left Leg LEO Pod- Left Wing LEO Pod- Nose LEO Pod- Right Leg LEO Pod- Right Wing LEO Pod * New textures for all props. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
YF-35 Warthog ETO Booster Set (for Poser): Introducing the ETO Booster add-on for the YF-35 Warthog VGF: Product Features:* Poser Figure:- Earth to Orbit Booster * Poses:- ETO Booster Fit- ETO Booster Poser Materials * New textures for all props. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Kestrel Shuttle for Poser: The Kestrel class atmospheric shuttle from Babylon 5. Model Features:* Poser figure: obj, cr2/ png, with 42,972 polygons.* Not scaled to the size of the Poser/ DAZ figures.* Panel lines and other details are modelled into the mesh.* No moving parts. Textures:* One texture map with hull coloring, at 4096x4096 pixels, and a "decals" textures/ transparency map at 2048x864 pixels.* The rest of the materials use Poser shaders. Designed for use in Poser 6 and above and not supported in any other software. Original model by Chris Kuhn and converted with his permission.
Medieval Village (for Poser): This medieval-styled village includes all the buildings that would be commonly found in a village set in the Tudor period of England.Windmills flank the central area so grain merchants can quickly process their harvest and produce milled food.A horse stable in the middle of the village allow the town residents and visitors to tie up their horses for the night. A fence surrounds the stable, though to keep livestock form getting away.Other buildings include houses, merchant shops, and even two bathroom-outhouses. Product Features:* One Poser figure: obj, cr2/ png, at 60,428 polygons.* All of the parts can be rotated, repositioned, or hidden/ shown from the scene.* All three windmill vanes can rotate, with an ERC dial on the Body for each one.* Two bathroom doors can open and close, with an ERC dial on the Body for each one.* Six doors on the horse house can open and close, with an ERC dial on the Body for each one. Camera Files:* Includes 13 camera presets for easier movement around the buildings.* Use these files to render your own scenes or use them as a starting point. Textures:* One set of texture and corresponding bump maps, ranging from 512x512 to 2048x2048.* Does not use Poser`s shader nodes. All images rendered in Poser Pro 2012 with the included camera angles. This product is designed for use in Poser 5 and above.
Y-Wing Fighter (for Poser): The Y-Wing Fighter from Star Wars.Includes:* Poser figure: obj, cr2/ png* ERC dials for:- Open Canopy- Upper Gun Rotate- Upper Gun Up/ Down* One set of textures, made by mrsparky* Pose files for:- Hide Landing Gear- Show Landing Gear- Position AstromechNote: Astromech available (for free) separately.
Junior Officers Room (for Poser): Your starship has a command center, an engineering room, and even hallways, but where are the crewmembers going to stay? That's right- in this set of quarters. The room is divided into sections: bedroom, living room, foyer, replicator/ hallway, and bathroom. This model includes the room, exterior hallways with opening doors, and separate furnishings.You can add the fully furnished room to the scene or load only the room and decorate it yourself. Product Features:* Poser figures: obj, cr2/ png - All models shown in the sales images. Room Features:* Includes a plate decoration on one wall, which can be hidden/ shown.* Includes two bladed weapons on the walls, which can be hidden/ shown or repositioned.* All walls (and the ceiling) can be hidden for easier camera placement.* Includes 7 sets of dual doors which can open and close, with Pose Control dials on the Body.* Includes the hallway shown behind the room. There are no hallways on the other sides of the hallway doors. Poses:* Hide/ show each wall and the ceiling.* Hiding and showing the walls also hides and shows the parts located on the walls, such as the desk, wall plate, and weapons. Cameras:* Thirteen camera files are included.* The camera files also hide any walls which may be blocking the camera.* Use these to render your scene or as a starting point. Textures:* One set of texture maps.* The door labels and wall badges are mapped the same as the Futuristic Hallways and Stellar Cartography, so you can use the same textures will all 3 models.* Also uses Poser Firefly shaders such as glass and metal. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software.
AVF-35-J Wildhog Assault Booster Set (for Poser): Introducing the assault booster add-on for the AVF-35-J Wildhog AVGF: Product Features:* Parented Props:- Assault Booster- AVF Leg Pod Left- AVF Leg Pod Right- AVF Nose Pod- AVF Wing Pod Left- AVF Wing Pod Right * Textures for all props. The previous purchase and installation of the AVF-35-J Wildhog is required for this product to work correctly. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Sporty Outfit (M4) (for Poser): Sporty suit, sweats, or joggers- whatever you call it, this outfit will let your M4 character be casually relaxed in any situation. Product Features:* Poser figures: obj, cr2/ png:* Joggers (Pants), at 13,636 polygons* Shirt, at 18,768 polygons; includes an UnTuck morph* Shoes, at 14,206 polygons Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. .: Textures / Material Files :.* One set of texture maps for each clothing. .: Morphs :.* Each clothing includes the usual morphs to fit your M4 character Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Electric Shopping Cart (for Poser): Also known as an electric scooter or a mobility scooter, this is the mobility aid equivalent to a wheelchair but configured like a motorscooter. It is often referred to as a power-operated vehicle/scooter or electric scooter as well. This version includes a basket to aid in shopping or carrying items. Product Features:* Poser figure: obj, cr2/ png, with 92,012 polygons.* An ERC dial on the BODY rotates all three wheels.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheel and steering wheel.* The front basket (and holder) can be hidden or shown. Textures:* No textures are used on the model: all materials use Poser shaders.* Includes the following material collection files for the body metal and wheel hubs:- Basket hide/ show- Blue- Gray- Green (default)- Red- Yellow Bonus: The main body metal material is named the same as our car trucks. This means that ALL of the existing car-metal material collection files will work on this model. This product is designed for use in Poser 5 and above. A version optimized for use in DAZ Studio is available separately. Originally created by and acquired from PoserWorld.
Shanty Town Buildings 1: Set 2 (for Poser): This town has seen better days. What happened here? Did a storm come through the area and destroy all the buildings? Where the people forced to evacuate?Or was this town created by people who couldn't live anywhere else? Are these ramshackle buildings their permanent home or do they hope for something more. Combine the accessories and buildings to make your own shanty town:* Add fencing sections around a building.* Add metal panels to the walls.* Add and rotate the buildings.* Some buildings have separate parts which can be repositioned or hidden/ shown for more versatility.* Does not include a terrain or ground. We recommend using your own shader or texture on Poser`s Ground Plane. Product Features, Set 2:* Includes the following Poser figures: (obj, cr2/ png): - Shanty Building 05, at 2,169 polygons. Includes a ceiling and all 4 walls as separate parts.- Shanty Building 06, at 1,428 polygons. Includes a ceiling and all 4 walls as separate parts.- Shanty Building 07, at 534 polygons; no moving parts.- Shanty Building 08, at 691 polygons. Includes the ceiling/ overhang as a separate part. Hide/ Show Poses:* A set of hide/ show poses for the ceiling and walls for the buildings is included.- The buildings were designed so that the hide/ show poses will work on every model, provided the building has walls or a ceiling. Textures:* One set of texture maps with corresponding normal/ bump maps, at 2048x2048 pixels. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio; although DAZ Studio may import the files, we do not use DAZ Studio and can't support any issues that may occur. Original model by Arteria3D and uploaded for sale here with full permission.
Shuttle Bus (for Poser): Whether you need a shuttle from the hotel or parking lot to the airport, this model is ready for you!Includes decals for 3 shuttles: from the offsite parking lot to the Orlando airport, from the offsite parking lot to the Newark Airport, and a courtesy van while your car is in for service at the RD Fine Auto car dealership. Product Features:* Poser figure: obj, cr2/ png, with 96,137 polygons.* Driver side door can open and close, with a Pose Control dial on the Body.* Passenger side doors can open and close, with a Pose Control dial on the Body.* All four wheels can rotate around, with a Pose Control dial on the Body.* Front wheels are steerable.* Steering wheel is turnable and a Pose Control dial on the Body affects both the front wheels and steering wheel.* The hood can open and close, with a Pose Control dial on the Body.- An engine can be seen when the hood is opened.* The driver`s seat can move front-to-back.* The seats in the rear do not move. Textures/ Material Files:* All texture maps are 4096x4096 pixels and include corresponding normal/ bump maps.* Nine materials for the Body metal:- Three colored designs- Six solid colors* Four materials for the decals* Five license platesAlso includes corresponding displacement maps to simulate raised lettering on the plates.-Displacement mapping adds extra realism as the plate-lettering is three-dimensional.The license plate is mapped the same as our other cars and trucks, which means you can use those textures on this model.* Textured using a combination of texture maps and Poser shader nodes. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software.
Navy Forklift (for Poser): The forklift has a fully detailed drivers position, undercarriage, and lifting forks. The wheels can spin and be turned with the steering wheel (via ERC dials), and the forks can be raised, lowered, and tilted as well. Moving parts include wheels, steering wheel, forks, control levers, gas pedal, brake pedal and clutch pedal. ERC dials for ease of use including basic movements such as driving and steering! Comes with a smart-parented Driver Dummy (unrigged and not pose-able) that can be placed in the vehicle for use in scenes where a fully clothed figure wouldn't be necessary. This dummy figure will automatically parent in place when loaded. Original model by Chris Schell and uploaded here with permission.
Chevrolet Chevelle (for Poser): The Chevrolet Chevelle was a mid-sized automobile produced by the Chevrolet division of General Motors in three generations for the 1964 through 1977 model years. The 1968 Chevelle got an all-new distinctly sculpted body with tapered front fenders and a rounded beltline. The car adopted a long-hood/short-deck profile with a high rear-quarter "kick-up". While all 1967 Chevelle models rode a 115-inch (2,900 mm) wheelbase, the 1968 coupes and convertibles now rode a sporty 112-inch (2,800 mm) wheelbase. This digital model is based on the design of the "second generation" version, sold from 1968-1972. Product Features:* Poser figure file: obj, cr2/ png, with 132,617 polygons.* The trunk can open and close (with an ERC dial on the BODY).* The right and left doors can open and close (with an ERC dial on the BODY).* All four wheels can rotate (with an ERC dial on the BODY).-An ERC dial on the BODY steers the front two wheels.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel.* All three pedals can move front-to-back.* The left and right seats can move front-to-back to accommodate the various Poser figures.* Left and right door handles (inside the car) can rotate (with an ERC dial on the BODY).* Windows are separate parts which can be hidden or shown (hide/ show poses are included).* The hood can not open and this model does not have an engine. Textures:* 8 Body metal colors* 5 License platesAlso includes corresponding displacement maps to simulate raised lettering on the plates.-Displacement mapping adds extra realism as the plate-lettering is three-dimensional.The license plate is mapped the same as our other cars and trucks, which means you can use those textures on this model.* Bump map on the tires create tread detailing.* Accurately reflecting mirrors. For use in Poser 5 and above: this model uses advanced materials such as blinn, reflection, displacement, and more. Original model by Digimation and sold here with permission.
Starship Bridge 11 (for Poser): Introducing the next starship room for Poser: the Starship Bridge 11.Product Features:* Includes one Poser figure (obj, cr2/ png), at 82,194 polygons.Moving Parts:* Like our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* The front left and right doors (on the front wall) can open and close (with ERC dials on the BODY).* The rear doors can not open and close.* The two crew chairs (helm and ops) can rotate (with ERC dials on the BODY).* The captain's chair can not rotate.Textures:* Two set of textures are included: -Bluish tint with hexagonal keyboards/ control surfaces.-Greenish tint with rounded-square keyboards/ control surfaces.* Uses Poser's Clouds node to add some extra bump detailing to the consoles and walls.* Templates are included, and some are color-coded for ease-of-use.Poses:* Hide/ show each wall and the ceiling.* Hiding and showing the left wall hides and shows the left doors, and hiding and showing the right wall hides and shows the right doors.Cameras:* Ten camera files are included.* The camera files also hide any walls which may be blocking the camera.Scene File:* Includes the Starship Bridge 11 in the center of the scene.* The light set in the included scene file has Ambient Occlusion enabled for the top light.-This will create additional detailing, but may increase render times.Recommended for use in Poser 5 and above, though the Ambient Occlusion lighting will only work in Poser 6 and above.People, clothing, and poses not included.
Backyard Building (for Poser): An abandoned building sits on an empty lot. What happened here? Was it once a great factory or was it used for more suspicious reasons? Includes plenty of separate parts to further customize your scene.Need an empty lot for your scene? Hide the building.Don't need the grass? Hide it. Product Features:* Poser figure: obj, cr2/ png, with 290,721 polygons.* Includes the following parts which can be hidden/ shown:- Building- Fence- Grass1- Grass2- Grass3- RearWall- RightWall- Sheet1- Sheet2- Wires Textures:* One texture scheme.* Some materials, such as glass and metal use Poser shaders. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Space Warrior (M4 and V4) (for Poser): A more military outfit for a more warrior, space-faring society. Gone is the sleek look used by other races in the galaxy and in its place is coated armor and plated shoulder pads.Both the males and females wear the same outfit... and both are expected to take on the same roles when going into battle! Product Features:A conforming set of clothing and props for M4 and V4:* Top for M4 (conforming clothing), at 18,799 polygons.* Top for V4 (conforming clothing), at 20,776 polygons.* Shoulder pads for M4 and v4 (parented prop), at 5,013 polygons. * Includes the usual morphs to fit your M4 character* Includes the usual morphs to fit your V4 character. Textures:* One set of textures and fabric bump map. Requires the previous download and installation of Michael 4 (M4) or Victoria 4 (V4) from DAZ. This set only includes the top and shoulder pads. It does not include pants or boots. Has been tested to work fine in DAZ Studio and Iray shader files are included. Original model made by Richard Duda with sales images by Sylvan. Uploaded for sale here with permission.
HMCS Snowberry (for Poser): The months leading up to World War II saw the RN return to the concept of a small escort warship being used in the shipping protection role. The Flower class was based on a whale-catcher design and apparently Winston Churchill labelled them "corvettes", thus restoring the title for the RN. As such, there is no linear link between the Flower class and the cruising vessels of pre-1877. There are two distinct groups of vessels in this class: the original Flower class which was a group of 225 vessels ordered during the 1939 and 1940 building programs; and the modified Flower class which followed with a further 69 vessels ordered from 1940 onward. The modified "Flowers" were slightly larger and somewhat better armed. In addition, those Flower-class vessels which saw service with the USN are also known as Action-class gunboats and carried the hull classification symbol PG (Patrol Gunboat), regardless of whether they were original or modified designs. Product Features:* Poser figure: HMCS Snowberry: obj, cr2/ png* Poser props: Anchor and chain: obj, cr2/ png 1) To use the Smart-propped Anchors go to your runtime library in the folder marked "Chris's Props > HMCS Snowberry" and click the thumbnails for the items you wish to load... these will load in your scene automatically parented to the ship but can still be individually posed if needed... 2) Some locations have only one joint edited, unused joints/parameters have been hidden and are un-needed, and other locations have had limits applied to represent the mechanical nature of the ship, In your Scene Tree, look for the parameters marked "Elevate, Train, Swing, Spin, and Swivel" to pose the various parts of the ship. Guns, Cranes, Turrets and even the Spotlights and Propellers are pose able in this model! 3) All pose able parts can be found in the scene tree for the skeleton list of the HMCS Snowberry (I've rigged the parts rather than using morphs for better all-round versatility). This includes some 30 moving parts including fully poseable depth charges rigged to move independantly! 4) Included are the main HMCS Snowberry figure, 3 smart-propped versions of the Anchors (all anchors up, single anchor lowered, and all anchors lowered).. Optionally the Anchors may be left out for replacement by other props (such as the available "easy pose" chains and extra items of that nature available from many sources). Original model by Chris Schell and uploaded for sale here with permission.
Viking Town: Set 3 (for Poser): Transport your characters to the time of the Vikings, where marauders roamed the seas and villages were pillaged every day.This set of buildings and props will let you create your own Viking village, wherever your character may set up their base camp. Includes buildings, logs, stones, a longboat, and more. Product Features:* Includes the following Poser figures: (obj, cr2/ png), some of which have separate parts that can be hidden/ shown or repositioned.- Building 04, at 5951 polygons. Parts: 3 beds, fire pit, 3 seats, 2 stools, and 1 table. An interior can be seen through the open doorway.- Building 11, at 4193 polygons. Parts: fire pit, 1 bed, 2 seats, 1 stool, and 1 table. An interior can be seen through the open doorway.- Building 12, at 788 polygons. No moving parts and no interior.- Building 13, at 1335 polygons. No moving parts.- Lookout Tower, at 137 polygons. No moving parts.- Rune Stone 1, at 158 polygons. No moving parts.- Rune Stone 2, at 181 polygons. No moving parts.- Well, at 1,519 polygons, Parts: arms, bucket, and fence. Textures:* One set of texture maps with corresponding normal/ bump maps, at 1024x1024 and 2048x2048 pixels. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Medieval Market 2 (for Poser): The marketplace is open! Come for the shopping and stay for the unique architecture of the surrounding buildings.Use this set of stalls and buildings to create your own medieval-style market. Product Features:* Poser figure: obj, cr2/ png:* Row House A: 2,828 polygons, no moving parts.* Row House B: 659 polygons, no moving parts.* Row House C: 774 polygons, no moving parts.* Row House D: 633 polygons, no moving parts.* Row House E: 5,546 polygons, no moving parts.* Rowhouse Preset: a separate figure which places all the row houses into a city block of buildings.* Town House A: 1,440 polygons, no moving parts.* Town House B: 1,966 polygons, no moving parts.* Traders House: 2,578 polygons, no moving parts. Textures:* One set of photo-realistic texture maps, ranging in size from 1024x1024 to 2048x2048 to 4096x4096 with corresponding normal/ bump maps. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Skull Rock Mountain (for Poser): SkullRock... a dark, sinister rock, standing high in the Mountains of Astriak. Man-made, or magic made?No known documents exist on the structure. This model is perfect for adding a dark, monstrous structure to your scene. Model features steps, which can be climbed by your characters, plus small cave sections. Product Features:* Poser figure: obj, cr2/ png, with 4,382 polygons.* There are no moving parts. Textures:* Texture map, normal bump map, and specular map for the skull, all at 4096x4096 pixels.* Texture map, normal bump map, and specular map for the mountain, all at 4096x4096 pixels. All sales images rendered in Poser Pro 2012. This product is designed for use in Poser 5 and above. Original model by Arteria3D, sold here with full permission.
Castle Keep And Tower (for Poser): Build your own castle keep and town with this set of 4 medieval inspired buildings. The main castle tower is surrounded by a wooden fence to keep intruders out. Luckily, there are numerous ladders for your defenders and guards to climb up. The main tower itself is further protected by a wooden walkway with an opening gate.The other buildings can be used as merchant storefronts or houses. Product Features:* Includes the following Poser figures: (obj, cr2/ png):* Castle Walls and Tower, at 15,510 polygons, including:- 18 separate ladders, which can be hidden, shown, or repositioned.- A wooden bridge/ gate can rotate upwards to prevent intruders from reaching the inner building (with an ERC dial on the Body).- The exterior walls are separated into sections which can be hidden or shown.- The tower`s ceiling and walls can be hidden or shown, which makes it easier to create scenes of your characters in the tower.* Keep Building A, at 1,494 polygons. Includes a ceiling and 4 walls.* Keep Building B, at 508 polygons; no moving parts.* Keep Building C, at 468 polygons. Includes a ceiling and 4 walls. Textures:* One set of texture maps, ranging from 1024x2048 to 2048x2048 to 4096x4096 pixels with corresponding specular and normal/ bump maps. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio. This model is fully licensed for use in games and apps.Also works great as background scene-filler. Original model by Arteria3D and uploaded for sale here with full permission.
Leather Armor (M4) (for Poser): What kind of character would wear this armor? Is he a thief trying to sneak into a compound? Or is he a valiant solider on a rescue mission?Perfect for fantasy or medieval scenes. Each armor piece is a separate figure, which makes it easy to add or remove pieces that you need. Product Features:* Includes the following conforming Poser figures: (obj, cr2/ png):- Arm Armour, at 7,690 polygons.- Boots, at 17,470 polygons.- Chest Straps, at 528 polygons.- Gauntlet Left, at 4,709 polygons.- Gauntlet Right, at 4,709 polygons.- Helmet, at 9,156 polygons.- Knee Guards, at 12,240 polygons.- Leg Armour, at 15,132 polygons.- Torso Armour, at 22,232 polygons.- Trousers, at 3,272 polygons. Morphs:* Includes the usual morphs to fit your M4 character Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ.Since this is full-body clothing, you shouldn't need morphs on M4. Textures:* One set of texture maps, at 4096x4096 pixels with corresponding normal/ bump maps. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
AVF-35-J Reactive Armour (for Poser): During the Solinoid/UN Protectorate War, it was determined that heavier fire-power was needed for UN forces to confront the enemy fleets. In response to this need, UN Forces began in secret to develop a blow-away, Reactive Armour System to better protect their transforming fighters in heavy combat. The new armour more than doubled the weapons loads of the fighters, but unfortunately limits them to Mecha-mode only while the armour is worn. Once the armour and it's weapons are depleted, the Reactive Armouring may be jettisoned by the pilot restoring mobility to the aircraft. Here are some of the highlights:* Over 70 missiles that can be fired individually, in small groups, or all at once from easy to use ERC dials!* Missile hatches can be opened and closed via ERC dials for ease of use...* 6 Separate Conforming Armour parts (Back-pack, Chest Plate, Arms and Legs) with fully controllable ordinance deployment. * Numerous ERC controls on the armour components for complete control of most vital functions from 1 location.* DAZ Studio users can take advantage of the conforming items abilities to use the "Death Blossom" ERC Dial on the Main AVF-35-J Wildhog to fire all missiles from the fighter and all armour parts from one dial!* The main AVF-35-J Wildhog Figure will need to be transformed to Mecha Configuration for this product set to function properly! The previous purchase and installation of the AVF-35-J Wildhog is required for this product to work correctly. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
AVF-35-J Wildhog Weapons Add-On Set (for Poser): Introducing the weapons add-on for the AVF-35-J Wildhog: Product Features:* Poser Figures:- AIM 321 Swarm Multi-Warheads- MGX AS Missiles- Mixed Anti-Air Load- Mk35 Multi-Missile Pods* New textures for all figures. The previous purchase and installation of the AVF-35-J Wildhog is required for this product to work correctly. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
AVF-35-J Wildhog Orbital Booster (for Poser): Introducing the Orbital Booster add-on for the AVF-35-J Wildhog: Product Features:* Poser Figure:- Earth to Orbit Booster* Poses:- ETO Booster Fit* New textures for all the Orbit Booster. The previous purchase and installation of the AVF-35-J Wildhog is required for this product to work correctly. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
AVF-35-J Wildhog LEO Armor Set (for Poser): Introducing the LEO Armor add-on for the AVF-35-J Wildhog: Product Features:* Parented Props:- Booster Pack- Leg Pod Left- Leg Pod Right- Nose Pod* Textures for all props. The previous purchase and installation of the AVF-35-J Wildhog is required for this product to work correctly. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
USS Enterprise (for Poser): The USS Enterprise from the CBS All-Access show, Star Trek: Discovery.Model Features:* Poser figure: obj, cr2/ png, with 71,871 polygons.* Not scaled to the size of the Poser/ DAZ figures.* Panel lines and other details are modelled into the mesh.* The nacelle turbines can rotate, with an ERC dial on the Body.* The hangar bay doors do not open and there is no interior.Textures:* One texture map with hull coloring and the name of the ship, at 4096x4096 pixels.* The rest of the materials use Poser shaders.Designed for use in Poser 6 and above and not supported in any other software.Original model by Chris Kuhn and converted with his permission.
Space Fleet Officer V4 for Poser: The official uniform worn by the officers of the 27th century Space Fleet. Includes 6 colors to fully staff all the departments on your ship. .: Product Features :.* Poser figures: obj, cr2/ png:- Boots, at 7,396 polygons; no position morphs.- Dress, at 7,123 polygons.-- Includes the following position morphs:- Astride- L-Back- L-Kick- L-Side- L-Step- R-Back- R-Kick- R-Side- R-Step- Sit- Walk-L- Walk-R Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. .: Textures / Material Files :.* Six textures (at 1500x1500 pixels) for the dress with corresponding material files:- Blue- Green- Orange- Purple- Red (default)- Yellow .: Morphs :.* Includes shape morphs to fit your V4 character. Requires the previous download and installation of V4 from DAZ. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
VP Gas Station (for Poser): This is a model of a gas station, typically seen by the side of many highways and freeways.Cars and trucks can pull in, next to gas pumps to refuel or pull into any of the parking spaces. The interior can be seen through the glass windows, though this gas station is currently running low on food supplies.On the side of the gas station are tables and chairs for relaxing.Behind the gas station is large grassy area for kids to stretch their legs and play..: Product Features :.* Poser figure: obj, cr2/ png, with 130,254 polygons.: Moving Parts :.Includes the following parts which can be hidden/ shown... and some parts can be repositioned in the scene.* Barrier1* Barrier2* Barrier3* Barrier4* Bathroom (building)* 2 Benches* 8 Chairs* 2 Curtains inside the lounge area* 5 Doors* Dumpster* Enter Sign* Exit Sign* 6 Flags* 2 Gas Islands* 4 Gas Pumps* Lamp* Main Sign* 4 Palm trees* 6 Poles* Roof* 7 Shelves inside* 3 Street Lights* 3 Tables* Traffic Light* Trash Can* Utility.: Camera Files :.* Seventeen camera files are included: use these to render your scenes or use them as a starting point.* Use these to render your scenes or use them as a starting point... rotate the camera and see what else can be seen!.: Textures :.* Includes plenty of textures to customize the look of the gas station:- Prices on the pumps- Gasoline styles- Tile floor- Grassy areas- And more!* Feel free to experiment with Poser's shader nodes (such as Brick and Grass) to recolor the model.Scene construction and sales images created in Poser Pro 2012.Cars and people not included
Explosion Effects (for Poser): A set of explosion effects to add your scene. Includes:* 3 material collection files:- Dirt Spray- Impact Sparks- Water Splash* Props come in 4 categories:- Auto-Fire Impact-- Long Spray-- Short Spray- Bomb Blasts-- Large Blast-- Short Blast- Bullet Impacts-- Large Hit-- Rifle Hit-- Small Hit- Muzzle Blasts-- Large Muzzle Blast-- Small Muzzle Blast- Shell Impacts-- Grenade Blast-- Large Cannon Blast-- Medium Cannon Blast-- Small Cannon Blast Original model by Chris Schell and uploaded here with permission.
Tech Noir (M4) (for Poser): Dress your M4 characters in this sci-fi steampunk outfit. Perfect for use as a spy, a soldier, or whatever situation your character finds himself in.The mask is a separate model: add it to your character as a disguise or uniform or hide it as needed. This is a set of super-conforming clothing for M4. Super-conforming means the morphs on the clothing will automatically follow the morphs of your M4 character.For example, if you set your character's Bulk morph to 1.0 and then add the clothing, the clothing's Bulk morph will also be set to 1.0. Product Features:* Poser figures: obj, cr2/ png:* Jacket, at 71,592 polygons; no position morphs. * Mask, at 25,359 polygons; includes the following position morphs:- Big Hair- No Hair * Pants, at 41,947 polygons; no position morphs.- The boots are part of the pants. .: Textures / Material Files :.* One set of texture maps for each clothing. .: Morphs :.* Each clothing includes the usual shape morphs to fit your M4 character, where applicable. Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
Vault Room (for Poser): Do your adventurers dare to enter this vault room? Who knows what dangers lie within... evil curses? Mummies? Aliens from another dimension?Why is the rear room empty? Did another adventurer raid the treasures? Is it a trap set by the bad guys? You decide!Product Features:* Poser figure file (obj, cr2/ png), with 44,105 polygons.* The doors can open and close, with an ERC dial on the Body.* The front gate can open and close, with an ERC dial on the Body.* The stands in the side alcoves and in the front are separate body parts which can be hidden/ shown or repositioned to suit the needs of your scene.* The water is a separate part which can be raised and lowered or hidden from the scene.- Raise the water to flood the front area or lower it to keep your characters safe.Textures:* One color scheme, which includes texture maps, bump maps, and Poser shaders.* Includes 4 material collection files to recolor the water:- Water smooth (blue)- Water rough (blue)- Lava (red)- Slime (green)Poses:* 46 hide/ show poses for each wall and the ceiling, front stand, and all 5 left and right stands.Cameras:* Ten camera files are included.* The camera files also hide any walls which may be blocking the camera.You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed.This product is meant for use in Poser 6 and above and may not work correctly in other software programs.All images rendered in Poser Pro using the included light sets and Indirect Lighting (IDL) using the included camera presets.
Navy Weapons Cart (for Poser): The Military uses a variety of carts to haul ordnance and external stores from the munitions storage magazines to the aircraft for loading. This set contains 3 different carts; 1 Drop-Tank/Gun-Pod Cart, 1 Weapons Cart (for bombs or missiles), and 1 External Stores Cart (for ECM Pods and other specialized external stores). Features: Each cart is fully detailed with spinning wheels, and working details. It is set up to be attached to the free Aircraft Tug, or can be used on its own for your Aircraft Carrier or Air Field scenes. Moving parts include wheels, trailer and hitch ERC dials for ease of use! Original model by Chris Schell and uploaded here with permission.
Solinoid Mogwai-Esu (for Poser): The Discovery of an advanced transforming Alien Fighter crash on earth led us to the creation of the Warthog and Wildhog Variable Fighters. Now introducing the Solinoid Mogwai (Codenamed Gremlin by UN Forces), the fighter that gave us the leg up on transformation technology. Arriving in force in Terran Space, the Solinoid Invaders have launched an invasion from their home system of Solinides in the Solinides Star-cluster. The Mogwai-Esu is a special fighter used by the commanders of the Solinoid invasion force… faster, more manoeuvrable and with heavier armaments The Mogwai-Esu is piloted by only the very best Solinoid Pilots! Product Features:* Poser figure: obj, cr2/ png, with 160,714 polygons.* Includes one Poser figure which can transform into 2 modes: aircraft and mecha.* Over 75 Points of Articulation on the main figure!* Moving Flaps, Ailerons, Rudders, Opening Landing Gear Doors, Raising and Lowering Gear, turning wheels, Opening Canopies, Deployable slats, fully independently controllable missiles, and much more...* Separate Conforming Figure Weapons and Ordinance, with fully controllable ordinance deployment. (Some sold as separate packs)* Numerous Independent ERC controls on the main figure for complete control of most vital functions from 1 location.* Independent ERC controls for each flap, rudder, aileron, wing, and canopy.* Articulated Landing gear with co-ordinated ERC for 1 dial raise and lower.* ERC weapons controls for launching and steer-able missiles and ordinance.* ERC dials for easy transformation!* Pre-Posed Poses for Fighter configuration and Mecha Configuration.Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Police Camera (for Poser): A camera commonly found in police stations and used to take mug shots of the accused. Product Features:* Poser figure: obj, cr2/ png, with 5,116 polygons.* The top camera section can rotate, with a Pose Control on the Body. Textures:* One set of texture maps. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by Tony Rizo and sold here with permission.
German Officer (M4) (for Poser): This historic German military officer is ready for action!Will he lead your troops or is he an obedient soldier, ready to do your leader`s bidding? And where will be show up next- a WWII scene? A military re-enactment... or a sci-fi scene masquerading as historical Earth? Bonus: these are low-polygon clothing models which means they won't bog down your system. Product Features:* Includes the following conforming Poser figures: (obj, cr2/ png):- Ammo Belt, at 534 polygons.- Boots, at 408 polygons- Hat, at 413 polygons.- Jacket, at 5,298 polygons.- Trousers, at 1,022 polygons. Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Morphs:* Includes all the usual morphs to fit your M4 character: The ammo belt doesn't have any shape morphs since this would distort it.The hat doesn't have any shape morphs because M4's head doesn't have any shape morphs. Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ.Since this is full-body clothing, you shouldn't need morphs on M4. Textures:* One set of texture maps with corresponding normal/ bump maps:- Jacket: 4096x4096 pixels- Trousers: 2048x1024 pixels- Hat: 2048x2048 pixels- Badges: 256x256 and 1024x512 pixels. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Victorian Rogue (M4) (for Poser): What kind of character wears this outfit? Is he a rogue, thief, scoundrel... or a secret hero! It's up to you! Product Features:* Includes the following conforming Poser figures: (obj, cr2/ png):- Boots, at 1,086 polygons- Chest Belt Left, at 3,078 polygons.- Chest Belt Right, at 3,078 polygons.- Open Coat, at 4,277 polygons.- Hat, at 1,169 polygons.- Scarf, at 2,225 polygons.- Shirt, at 1,879 polygons. The sleeves can be hidden to create a short-sleeved version.- Trousers, at 1,480 polygons. Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Poses:* Hide/ show the shirt long sleeves* Hide/ show M4's body parts Morphs:* Includes the usual morphs to fit your M4 character. The hat doesn't have any shape morphs because M4's head doesn't have any shape morphs. Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. Textures:* One set of texture maps with corresponding normal/ bump maps for all the clothing, at 2048x2048 pixels. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Klingon Bird of Prey (for Poser): The Klingon Bird of Prey, from Star Trek III, Star Trek IV, and Star Trek: The Next Generation.The Klingon Bird-of-Prey was a type of warship utilized by the Klingon Empire serving the Klingon Defense Forces from the late 23rd century into the late 24th century. The Bird-of-Prey of the mid-24th century was said to be equipped with the Klingon Empire's "best weapons" and "finest warriors". While typically designated for peaceful missions, they were always "prepared to go into battle instantly."The typical offensive arsenal of the Bird-of-Prey included two forward-firing wing-mounted disruptor cannons, two photon torpedo launchers – positioned fore and aft – and deflector shields. By the 24th century, at least one ship of the class was armed with phasers, rather than disruptors, and possessed a weapons range that exceeded 40,000 kilometers.Product Features:* Poser figure: obj, cr2/ png, with 499,555 polygons.* Not scaled to the size of the Poser/ DAZ figures.* Panel lines and other details are modelled into the mesh.* The wings can open and close with an ERC dial on the Body.Textures:* One "scratches" texture map to add more detailing.* The rest of the materials use Poser shaders.* The model uses a unique mapping technique to colorize different sections of the same material without needing large texture maps.Designed for use in Poser 6 and above and not supported in any other software.Original model by Chris Kuhn and converted with his permission.
Victorian Thief (M4) (for Poser): What kind of character wears this outfit? Is he a rogue, thief, scoundrel... or a secret hero! It's up to you! Product Features:* Includes the following conforming Poser figures: (obj, cr2/ png):- Belt, at 6,280 polygons- Boots, at 1,924 polygons- Hat, at 1,216 polygons.- Jacket, at 4,939 polygons.- Scarf, at 3,716 polygons.- Trousers, at 2,864 polygons. Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Poses:* Hide/ show M4's body parts Morphs:* Includes the usual morphs to fit your M4 character. The hat doesn't have any shape morphs because M4's head doesn't have any shape morphs. Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ. Textures:* One set of texture maps with corresponding normal/ bump maps for all the clothing, at 2048x2048 pixels. This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
U.S.S Nevada (BB-36) (for Poser): USS Nevada (BB-36), the second United States Navy ship to be named after the 36th state, was the lead ship of the two Nevada-class battleships; her sister ship was Oklahoma. Launched in 1914, the Nevada was a leap forward in dreadnought technology; four of her new features would be included on almost every subsequent US battleship: triple gun turrets, oil in place of coal for fuel, geared steam turbines for greater range, and the "all or nothing" armor principle. These features made Nevada the first US Navy "super-dreadnought". Product Features:Included are the main USS Nevada figure, 3 smart-propped versions of the Anchors (all anchors up, single anchor lowered, and all anchors lowered), and 2 smart-propped O3U Corsair Float-planes. Optionally the Anchors may be left out for replacement by other props (such as the available "easy pose" chains and extra items of that nature available from many sources) as can the Aircraft... Pose-able features (some 70 moving parts in total) include: working Rudder and Propellers, Main and Secondary Gun Turrets that can rotate with Barrels that can elevate independently, working Cargo Cranes, functioning Spot-lights and Gun Directors, and pose-able Aircraft Catapults and Crane. As an extra option you can replace the low poly Float-planes with a fully pose-able version of the O3U Corsair Scout also available in my products catalog! Original model by Chris Schell and uploaded for sale here with permission. For use in Poser 6 and above.
USS Maryland BB-46 (for Poser): USS Maryland (BB-46), also known as "Old Mary" or "Fighting Mary" to her crewmates, was a Colorado-class battleship. She was the third ship of the United States Navy to be named in honor of the seventh state. She was commissioned in 1921 and, serving as the flagship of the fleet, cruised to Australia, New Zealand and Brazil. Included are the main USS Maryland figure, 3 smart-propped versions of the Anchors (all anchors up, single anchor lowered, and all anchors lowered), and 2 smart-propped O3U Corsair Float-planes. Optionally the Anchors may be left out for replacement by other props (such as the available "easy pose" chains and extra items of that nature available from many sources) as can the Aircraft... Pose-able features (some 70 moving parts in total) include: working Rudder and Propellers, Main and Secondary Gun Turrets that can rotate with Barrels that can elevate independently, working Cargo Cranes, functioning Spot-lights and Gun Directors, and pose-able Aircraft Catapults and Crane. As an extra option you can replace the low poly Float-planes with a fully pose-able version of the O3U Corsair Scout also available in my product catalog! Original model by Chris Schell and uploaded for sale here with permission. For use in Poser 6 and above.
Solinoid Fold Booster (for Poser): This pack contains fully conforming Deep-space Fold Boosters for the Solinoid Mogwai and Mogwai-Esu Variable Geometry Fighters. Used for Deep-space operations and to allow the Solinoid Fleet Aircraft to quickly reach targets from long distances, the Fold-booster allows un-heard of flexibility for Solinoid attacks. Included in the set:2 Fold Booster Packs complete with ERC controls for Booster Separation and Navigational Arrays.Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Assault Force (M4) (for Poser): Armor up your character and move out!Perfect for sci-fi or futuristic military scenes, whether your character is invading a planet or saving the galaxy from aliens. The choice is up to you! Product Features:* Includes the following conforming Poser figures: (obj, cr2/ png):Arm Armour, at 1,386 polygons.Boots, at 2,902 polygons.Knee Armour, at 478 polygons.Torso Armour, at 5,084 polygons.Trousers, at 2,567 polygons.Helmet, at 3,158 polygons.- The visor is a separate material that can be set to varying levels of transparency. Each armor piece is a separate figure, which makes it easy to add or remove pieces that you need. Morphs:* Includes the usual morphs to fit your M4 character Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ.Since this is full-body clothing, you shouldn't need morphs on M4. Material Collection Files:* Three levels of transparency for the visor:- 100% opaque- 50% transparent- 100% transparent* Includes one "body black" material collection file for M4. Textures:* One set of texture maps, at 2048x2048 pixels with corresponding normal/ bump maps. This product is designed for use in Poser 5 and above. Original model by Arteria3D and uploaded for sale here with full permission.
Scribe (M4) (for Poser): A writer, a scribe, or a historian? This outfit turns your M4 character into whatever your scene calls for. Is this character in a medieval setting or is he in the fantasy world? It's up to you! Product Features:* Includes the following conforming Poser figures: (obj, cr2/ png):- Boots, at 818 polygons- Hat, at 264 polygons.- Outfit with Trousers, at 4,283 polygons. Each clothing is a separate figure, which makes it easy to add or remove pieces that you need. Morphs:* Includes the usual morphs to fit your M4 character. The hat doesn't have any shape morphs because M4's head doesn't have any shape morphs. Requires the previous download and installation of Michael 4 (M4) base and Michael 4 Morphs++ from DAZ.Since this is full-body clothing, you shouldn't need morphs on M4. Textures:* One set of texture maps with corresponding normal/ bump maps:- Outfit: 4096x4096 pixels- Trousers: 2048x2048 pixels- Hat: 1024x1024 pixels This product is designed for use in Poser 6 and above. Original model by Arteria3D and uploaded for sale here with full permission.
USS Vestal (for Poser): Like the Arizona, the U.S.S Vestal was a veteran of both world wars, beginning life as a Fleet Collier (Coaler) in 1909. She was converted to a Fleet Tender ship in 1912 then spent the entirety of the First World War stationed in Queenstown, returning in 1919. In 1927 she was reassigned to the Pacific Fleet in Pearl Harbor... The USS Vestal model includes over 30 moving parts, such as: guns, cranes, turrets, spotlights, and propellers. Product Features:* Main USS Vestal figure* 3 smart-propped versions of the Anchors Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Starship Engineering Room 2 (for Poser): Introducing the next starship room for Poser: the Engineering Room 2.From this room, the crew can monitor all the energy functions of the ship.Product Features:* Includes one Poser figure (obj, cr2/ png), at 69,582 polygons.Moving Parts:* Like our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* The right and left doors can open and close (with an ERC dial on the BODY).Textures:* One set of textures is included.* This model uses Poser`s shader nodes for some materials.* All of the monitor screens use their own texture map, which makes it easy to change the screens and customize the room to suit the needs of your scene.* Templates are included.Poses:* Hide/ show each wall and the ceiling.* Hiding and showing the left wall hides and shows the left doors, hiding the right wall hides and shows the right doors..Cameras:* Eight camera files are included.* The camera files also hide any walls which may be blocking the camera.* All of the sales images were created using the included camera files.Scene File:* Includes the Engineering Room 2 in the center of the scene.* The light set in the included scene file has Ambient Occlusion enabled for the top light.-This will create additional detailing, but may increase render times.Recommended for use in Poser 5 and above, though the Ambient Occlusion lighting will only work in Poser 6 and above.
Afterburner Effect (for Poser): A simple UV Mapped cylinder prop in PP2 format, with custom textures and transmaps to create an Afterburner glow effect from a military jet engine. Simply load as needed, position, and manually parent the prop to the aircraft. Includes obj, pp2/ png, and 1 set of textures.Also includes a DAZ Studio friendly prop. Original model by Chris Schell and uploaded here with permission
USS Arizona Textures Set: Includes textures to represent both Pennsylvania Class Battleships, the USS Arizona and USS Pennsylvania, as they appeared at Pearl Harbour on December 7th, 1941. The set includes MAT Poses in pz2 format for ease of use! Requires the previous purchase and installation of the USS Arizona for Poser.
Sydney Bridge (for Poser): This command center incorporates new design features for the smaller starships coming into service. Rather than using multiple sit-down stations in the standard ring design, this bridge includes only two chairs: helm and ops. But unlike previous bridge designs, only the ops station is located in front of the captain.Stand-up stations take the place of the sit-down stations and these can be re-positions anywhere on the bridge, according to the mission needs. Additionally, a transporter pad has been built into the bridge to allow quicker evacuation and rescue missions. Please note that in emergency situations, injured crew members should be beamed directly to sick bay and not the bridge. Product Features:* Poser figure (obj, cr2/ png), at approx 122,968 polygons* As is usual for our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* Ops chair (at the front of the bridge) can rotate, with an ERC dial on the Body.* Ops console can rotate forward and back, with an ERC dial on the Body.* Helm chair (at the side of the bridge) can rotate, with an ERC dial on the Body.* The rear doors can open and close, with an ERC dial on the Body.* All four stations can be repositioned or hidden/ shown to suit the needs of your scene.* Includes the exterior hallway section shown in the sales images. Textures:* One color scheme for all the monitor displays is included. Poses:* Hide/ show poses for each wall and the ceiling, for both the bridge and hallway. Cameras:* Sixteen camera files are included.* The camera files also hide any walls which may be blocking the camera.You can use these camera angles to render your scenes or use them as a starting point and adjust them as needed. All images rendered in Poser Pro using zero lights and InDirect Lighting (IDL): all of the lighting in the scene is created by the "Lights" material. Designed for use in Poser 5 and above.This product has not been tested in DAZ Studio, but it was designed to be Studio-friendly. Unlike our other models, the doors are set to the "open" position, which should avoid any vertex-welding issues.
Space Fleet Uniform (M4) (for Poser): Take your M4 characters into the furthest reaches of space with this new set of sci-fi clothing. Designed to be practical, yet comfortable, this outfit is perfect whether your character is on the bridge or exploring a planet. .: Product Features :.A conforming set of clothing for M4:* Boots, at 11,008 polygons* Jumpsuit (jacket and pants), at 32,199 polygons* Belt Buckle: parented prop, at 466 polygons.* Lapel Pin: parented prop, at 2,821 polygons.* Includes the usual morphs to fit your M4 character. .: Textures :.* Boots:- Leather coloring.* Jumpsuit:- One fabric bump map.* Includes the following jacket colors (as material collection files):- Blue- Gray- Green- Orange- Purple- Red (default)- White- Yellow These colors were designed to match our other sci-fi clothing. Requires the previous download and installation of Michael 4 (M4) from DAZ.For use in Poser 5 and above; has not been tested in DAZ Studio. Original model made by Richard Duda with sales images by Estroyer. Uploaded for sale here with permission.
Spider Tank (for Poser): This is a futuristic robot sentry.Armed with two cannons, this spider tank can dominate the battlefield... or when shrunk down, it can infiltrate enemy bases with ease. Product Features:* Poser figure: obj, cr2/ png, with 12,507 polygons.* Gun mount can rotate, with an ERC dial on the Body.* Left and right guns can elevate, with an ERC dial on the Body.* The front gun parts can move in and out to simulate a recoil-firing effect, with an ERC dial on the Body.* Rear hatches on the guns can open and close* All six legs with three sections each, are posable.* One texture map, at 4096x4096 pixels. Original model created by Moscowich80. Uploaded for sale here with her full permission.
Gas N Git Station (for Poser): A friendly gas station or the last stop on the edge of nowhere? Add this gas station to your scenes and decide! Product Features:* Poser figure: obj, cr2/ png, with 35,763 polygons.* The front door can open and close, with an ERC dial on the Body.* The garage door can open and close, with an ERC dial on the Body.* The sign, fuel pump, and lamps are separate parts which can be hidden or shown to suit the needs of your scene. Textures:* One set of texture maps with corresponding normal/ bump maps at 2400x2400 pixels. Designed for use in Poser 6 and above and not supported in any other software. Car not included. Original model by Tony Rizo and sold here with full permission.
Bobs Diner (for Poser): This is an exterior scene of a typical American diner... Bob`s Diner, in fact! Who`s Bob, how did he start the diner, and how`s business going? That`s up to you! Includes everything you see: the diner, sign, fence sections, and background building. The diner, sign, and fences can be moved to further customize your scene. Product Features:* Poser figure: obj, cr2/ png, with 31,748 polygons.* Includes the following parts which can be repositioned in the scene:- Diner- 2 Fence sections- Sign- The background building can be hidden or shown but not moved. Textures:* One texture scheme.* Some materials, such as glass and metal use Poser shaders. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
European Street (for Poser): Northern France... Ireland... British cities...This is a model of a typical city street found all over Europe.Pose your characters walking down the street or driving in a car or just hanging out on a street corner.The model includes facades only: there are no interiors and no doors can open.Product Features:* Poser figure: obj, cr2/ png, with 58,547 polygons.* Each building is a separate part which can be hidden for easier camera placement, but they can not move.* All lamp posts are separate parts which can hidden/ shown or moved.Tip: Try duplicating the model and moving/ rotating it to the end of the pavement to quickly extend the length of the street.Textures:* One set of texture maps with corresponding normal/ bump maps.* No software-specific shaders are used on this model.Cameras:* Fourteen camera files are included.* The camera files also hide any buildings which may be blocking the camera.- You can use these camera files to render the scene or use them as starting points.All sales images rendered in Poser Pro 2012 with the included camera presets.Depth-of-field blurring was created within Poser.Designed for use in Poser 6 and above.
Nacelle Room (for Poser): This is the control room which is used by the crew to monitor the plasma injection conduits and the warp fields. The main center console displays readings on the plasma flow, temperature, and other reaction characteristics. Stations and monitors on the upper sides of the room can be programmed with additional readouts. Product Features:* Includes two Poser figures (obj, cr2/ png):- Nacelle Room Front, at 96,955 polygons; this is the control room for your characters.- Nacelle Room Rear, at 85,321 polygons; this is the plasma-processing room placed behind the large door.Use both rooms when the large main door is open or only use the front room with the large main door closed. Moving Parts:* Like our other sets, all walls (and the ceiling) can be hidden for easier camera placement.* The following parts can also be hidden and shown and even moved, to further customize the look of your scene:- Center console- Cabinet box- 5 Stand-up monitor displays- All of the doors can open and close, with ERC dials on the Body. Textures:* One set of textures is included.* This model uses Poser`s shader nodes for some materials. Poses:* Hide/ show each wall and the ceiling.* Hiding and showing the left wall hides and shows the left doors, hiding the right wall hides and shows the right doors.. Cameras:* Fifteen camera files are included.* The camera files also hide any walls which may be blocking the camera. All sales rendered in Poser Pro 2012 using the included camera presets. This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio; although DAZ Studio may import the files, we do not use DAZ Studio and can't support any issues that may occur.
A62M Seishin-Kaze (for Poser): 1946, Guadalcanal. With the success of the J7W Shinden prototype for the Japanese Army Air Corps, the Imperial Japanese Navy also embarks on an advanced aircraft of their own. Paralleling the development of the Shinden, the Navy receives possible designs from numerous manufacturers, and finally settles on a design from Mitsubishi as its newest aircraft. Features:Numerous conforming extras and over 50 ERC controls for the various parts of the aircraft to allow for maximum usability. Controls include some standard combat maneuvers as well as individual controls for the various moving parts on the aircraft. The model also features a fully detailed interior with working flight controls that are tied by ERC to the flight surfaces and moving parts of the aircraft.Also included are Optional Weapons Sets, a Dummy Pilot, Crew Boarding Ladder, and conforming Prop-Blur effect figures. Included conforming figure add-ons:* 1 set of conforming external "drop-tank" fuel tanks is included. These "drop-tanks" conforms to the Seishin-Kaze and are individually pose able so that the user can make them fall away and tumble as they drop, with ERC dials for ease of use.* 1 set of 2 conforming 572lb bombs, with ERC dials for ease of use.* 1 set of conforming Seaplane Floats.* 1 set of conforming "prop-blur" effects props for the propellers of the aircraft to give a sense of motion in flight.* 1 conforming "dummy" pilot figure (this figure is non-pose-able and doesn't not contain any joints or bones. This figure is low poly but is provided so that you can have a crew in the aircraft for your renders without needing to use the fully rigged figures).* 1 pose-able Crew Boarding Ladder for use in ground scenes. Original model by, and acquired from, Chris Schell, and now owned by VanishingPoint.
P.I.C.K. Kitchen Expansion Set (for Poser): The long awaited kitchen expansion set is finally here!!With 94 new components to play with you can give your Poser figures the kitchen you always dreamed of!!.: Product Features :.* 2 Cooker Components (3D models - .PP2 and .OBJ formats)* 24 Base Cabinet Components (3D models - .PP2 and .OBJ formats)* 32 Wall Cabinet Components (3D models - .PP2 and .OBJ formats)* 16 LightFrame Components (3D models - .PP2 and .OBJ formats)* 3 Faucet Components (3D models - .PP2 and .OBJ formats)* 9 Sink Components (3D models - .PP2 and .OBJ formats)* 8 Tiling Components (3D models - .PP2 and .OBJ formats)* 161 preset materials (.MC6)* Highly detailed meshes* Poseable doors and drawers* Cooker on/of dials per burnerDesigned for use with the P.I.C.K. (Poser Indoor Creation Kit).For use in Poser 6 and above.Content originally created by, and acquired from YURDigital.
Desert Town (for Poser): What happened in this town? Did people abandon it or is it in the middle of battle? Perfect for any scenes, ranging from a desert setting to sci-fi to post-apocalypse. Includes a wrecked truck on one side of the road, a second wrecked truck on another road, and a truck on patrol in the middle of the road. There are corridors between the buildings for more versatility. This model is low poly and is designed for distance shots. Because of this, some textures may look smeared or pixellated when viewed close-up. Product Features (Poser):* Includes obj, cr2/ png, with approx 55,944 polygons. Parts:* Town buildings * Patrol truck:- The trans dials are enabled so you can position it wherever you like or hide it from the scene.- All four wheels can rotate (with an ERC dial on the Truck).- Front two wheels can steer (with an ERC dial on the Truck).- The machine gun can rotate and tilt up and down (with ERC dials on the Truck).- The truck does NOT have an interior, so we recommend darkening the windows. * Wrecked truck 1 (behind the main truck) and Wrecked truck 2 (on the side road):- The trans dials are enabled so you can position it wherever you like.- All rotate dials are enabled for further positioning.- Or hide these from the scene. * Seventeen (17) separate doors which can be opened and closed... or hidden from the scene.- All doors have corresponding ERC dials on the BODY. Poses:* Hide and show Wrecked Truck 1* Hide and show Wrecked truck 2* Hide and show Metal Beams 1* Hide and show Metal Beams 2* Hide and show Rubble Pile 1 Textures:* Uses texture and bump maps at 2048x2048 pixels* No shader nodes are used on the model, which makes it easier to import this model into other software programs. Original model by Digimation, uploaded for sale here with permission.
USS Discovery (for Poser): The USS Discovery from the CBS All-Access show, Star Trek: Discovery.The USS Discovery (NCC-1031) was a 23rd century Federation Crossfield-class starship operated by Starfleet, under the command of Captain Gabriel Lorca and, later, acting captain Saru. By November of 2256, it was still considered impressively new, fresh out of the shipyards, and equipped with some of Starfleet's most advanced technologies (in contrast with the relatively old USS Shenzhou).As a Crossfield-class starship, Discovery was officially designated a science vessel. It has a crew manifest of approximately 140. The ship's facilities were able to accomodate 300 discrete scientific missions, a Starfleet record at the time.Both Discovery and its sister ship, the USS Glenn, were equipped with an experimental spore drive for field testing. Much research and refinement remained to be done as of late 2256, but if perfected it had the potential to instantly traverse vast galactic distances in the blink of an eye.Model Features:* Poser figure: obj, cr2/ png, with 174,701 polygons.* Not scaled to the size of the Poser/ DAZ figures.* Panel lines and other details are modelled into the mesh.* No moving parts.Textures:* One texture map with hull coloring and the name of the ship, at 4096x4096 pixels* The rest of the materials use Poser shaders.Designed for use in Poser 6 and above and not supported in any other software.Original model by Chris Kuhn and converted with his permission.
Sauna (for Poser): This is a model of a small sauna.The door can open so your characters can go in and out of the sauna. A stool in the front can be used as a footrest and the heater in the corner helps keeps things cozy and warm.And there's plenty of room on either side of the sauna for tables, chairs, lockers, or anything else your scene needs. The front wall of the sauna can be hidden or shown for easier camera placement. Product Features:* Poser figure: obj, cr2/ png, with 11,606 polygons.* Includes the following parts which can be hidden/ shown or repositioned:- Stool- Heater* Includes the following parts which can be hidden/ shown:- Ceiling: room and sauna- Front wall: sauna- Left wall: room and sauna- Right wall: room and sauna* And the door can open and close with a Pose Control dial on the Body. Textures:* One texture scheme.* Some materials, such as glass and metal use Poser shaders. All sales images rendered in Poser Pro 2012. Designed for use in Poser 6 and above and not supported in any other software. Original model by, and acquired, from Poserworld, and now owned by VanishingPoint.
USS Enterprise 1701-D (for Poser): The USS Enterprise, 1701-D, from Star Trek: The Next Generation. The USS Enterprise (NCC-1701-D) was a 24th century Federation Galaxy-class starship operated by Starfleet, and the fifth Federation starship to bear the name Enterprise. During its career, the Enterprise served as the Federation flagship and was in service from 2363 to 2371. Model Features:* Poser figure: obj, cr2/ png, with 219,145 polygons.* No moving parts.* Not scaled to the size of the Poser/ DAZ figures. Textures:* Specular, normal, and window maps for the saucer and engineering hulls and nacelles, at 4096x4096 pixels.* Separate "decals" texture map with the ship name and insignia.* The rest of the materials use Poser shaders. The detailed mesh and maps mean the model works great for close-up shots. Designed for use in Poser 6 and above and not supported in any other software. Original model by Chris Kuhn and converted with his permission.
YF-35 Warthog ELINT Armor Set (for Poser): Introducing the ELINT weapons add-on for the YF-35 Warthog VGF: Product Features:* Parented Props:- Recon Leg Pod Left- Recon Leg Pod Right- Recon Nose Pod- Recon Pack- Recon Wing Pod Left- Recon Wing Pod Right * New textures for all props. Original model by, and acquired from Chris Schell, and now owned by VanishingPoint.
Zerius Spaceship (for Poser): From the other side of the galaxy comes this nimble fightercraft. Capable of interstellar travel as well as atmospheric re-entry, this ship can take on any environment. The ship is armed with two wing-mounted cannons, but can be easily fitted with rockets or missiles as the mission requires..: Product Features :.* Poser figure: obj, cr2/ png, with 1,871 polygons.* There are no moving parts.* Does not include a cockpit or landing gear.Textures:* Includes 3 levels of detail for the hull:- For close-up shots: texture map, normal bump map, and specular map, all at 4096x4096 pixels.- For medium shots: texture map, normal bump map, and specular map, all at 2048x2048 pixels.- For distance shots: texture map, normal bump map, and specular map, all at 1024x1024 pixels.* Material collection files are included to automatically apply these textures.* One texture map for the engine rims, at 2048x2048 pixels.This product is designed for use in Poser 5 and above.It has not been tested for use in DAZ Studio; though since it has no moving parts, there should not be an issue when importing.This model is fully licensed for use in games and apps.Also works great as background scene-filler.
Shanty Town Buildings 2: City Block B (for Poser): This is a city-block worth of buildings which can be used however your imagination desires: it could be a derelict town or a tropical city or town or even a run-down city.This set includes:Set B: A set of buildings in a "north-south" street layout.The city block includes buildings which are viewable from all 4 sides. This means you can rotate the model for a different look.All of the Shanty Town 2: City Block A, B, and C models are built at the same scale, which means you can combine, duplicate, and reposition the models to create an even larger city.This model also works great with the Shanty Town 1 models.Product Features:* Set B: Poser figure: obj, cr2/ png, with 2,669 polygons.* The buildings and fences are separate body parts which can be hidden or shown to suit the needs of your scene. (Though they can not be moved or rotated.)* If you look close, you may be able spot opening doors (with an ERC dial on the Body).* Duplicate and rotate the city block to create an even larger city.Textures:* One set of texture maps, ranging from 2048x2048 to 4096x4096 pixels with corresponding normal/ bump maps.* Large texture maps make it perfect for both close-up and medium-range shots.This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio.This model is fully licensed for use in games and apps.Also works great as background scene-filler.Original model by Arteria3D and uploaded for sale here with full permission.
SR-71 (for Poser): Product Features:* Poser figure: obj, cr2/ png.* Pilot canopy can open and close (with an ERC dial on the BODY).* Navigator canopy can open and close (with an ERC dial on the BODY).* Tail rudders can rotate (with an ERC dial on the BODY).* Landing gear can be hidden or shown.* Landing gear doors can open and close (with an ERC dial on the BODY).* Two sets of left and right wing flaps can rotate up and down.-An ERC dial on the BODY raises or lowers both flaps.-A second ERC dial on the BODY raises or lowers the flaps opposite each other for banking turns.* Low-polygon textured pilot and co-pilot models are included- these are separate parts which can be hidden or shown, depending on the needs of your scene.-These were included so you can have people in your aircraft without adding a fully textured and clothed M4 figure to the scene.Poses:* Hide/ show landing gear, which also opens and closes the landing gear doors.* Hide/ show pilots.Textures/ MAT Poses:* NASA1: with a yellow stripe and black logo on the tail rudders.* NASA2: with a white stripe and red logo on the tail rudders.* Skunk: a skunk insignia on the tail rudders.* Detailed texture maps for the instrumentation panels.* Texture templates are not included; if you want to make your own textures, use the existing textures as guidelines.Note: This model was designed for medium to long-range shots and some textures may look pixellated or blurry when viewed at very close range.
Pathblazer SUV (for Poser): Product Features:* Poser figure: includes obj, cr2/ png, 105,656 polygons with extra detailing:-Modelled interior includes window controls on the doors.-Steering wheel includes cruise-control switches.-Center console includes dials and GPS navigation screen.* An ERC dial on the BODY rotates all four wheels.* Steering wheel is turnable and an ERC dial on the BODY affects both the front wheels and steering wheel.* Rear trunk can open and close, with an ERC dial on the BODY.* Right and left front doors can open and close, with an ERC dial on the BODY.* Right and left rear doors can open and close, with an ERC dial on the BODY.* Right and left mirrors (on the doors) can rotate.* The seats are separate parts:-Front seats can move forward and backward to accommodate the various Poser figures.-Rear seats can be hidden and shown (with an included pose file) for extra storage space.* Front license plate can be hidden or shown, depending on the needs of your scene.* The hood does not open and there is no engine.Morphs:* All four wheels include a "Flat Tire" morph to simulate a flat tire.
Goblin Chizbolt (for Poser): Add this goblin character to your fantasy or horror scenes. Is he a friendly goblin or will he destroy a village? You decide!Product Features:* Stand-alone Poser figure (obj, cr2/ png), at 19,358 polygons* All body parts are fully poseable.* Mouth and Face morphs:-Brow Up-Eyes Close-Mouth Open-NoseTextures:* One set of textures for the body, teeth, and tongue at 4096x4096 pixels.* One bump map for the body, at 4096x4096 pixels.Original model created by Moscowich80. Uploaded for sale here with her full permission.
Maintenance Tubes (for Poser): .: Product Features :.Includes three Poser figures (obj, cr2/ png) for you to mix and match to build your own scenes:* 3-Way Junction, at 22,447 polygons- Includes 2 bottom doors, 2 left doors, 2 right doors, and 2 front doors, all with ERC dials on the Body to open them.- The ceiling is open so you can connect more 3-Way Junctions vertically.* 4-Way Junction, at 18,707 polygons.- Includes 2 left doors, 2 right doors, 2 front doors, and 2 rear doors, all with ERC dials on the Body to open them.* Tube section, at 7,845 polygons.- Includes 2 doors with an ERC dial to open them.- One end does not have the "collar" and doors, which makes it easy to connect to the Junctions and other Tubes.- The bottom sections of the front and rear walls can be hidden or shown for further customization.Also includes presets to quickly build your scene:* 3-Way Junction with 3 Tubes coming off.* 4-Way Junction with 4 Tubes coming off.* 3 3-Way Junctions in a vertical line.* 3 Tubes connected in a horizontal line.
Shanty Town Buildings 2: City Block A (for Poser): This is a city-block worth of buildings which can be used however your imagination desires: it could be a derelict town or a tropical city or town or even a run-down city.This set includes:Set A: High rise and lower buildings in a square street layout.The city block includes buildings which are viewable from all 4 sides. This means you can rotate the model for a different look.All of the Shanty Town 2: City Block A, B, and C models are built at the same scale, which means you can combine, duplicate, and reposition the models to create an even larger city.This model also works great with the Shanty Town 1 models.Product Features:* Set A: Poser figure: obj, cr2/ png, with 4,595 polygons.* The buildings and fences are separate body parts which can be hidden or shown to suit the needs of your scene. (Though they can not be moved or rotated.)* If you look close, you may be able spot opening doors (with an ERC dial on the Body).* Duplicate and rotate the city block to create an even larger city.Textures:* One set of texture maps, ranging from 2048x2048 to 4096x4096 pixels with corresponding normal/ bump maps.* Large texture maps make it perfect for both close-up and medium-range shots.This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio.This model is fully licensed for use in games and apps.Also works great as background scene-filler.Original model by Arteria3D and uploaded for sale here with full permission.
BB-8 Astromech Droid: The BB-8 droid from Star Wars: The Force Awakens. Although the robot is a fully-functioning puppet in the movie, this is a digital model for use in Poser 5 and above.  .: Features :.* One Poser figure: obj, cr2/ png, with 66,908 polygons.* Scaled to the Poser people, roughly half the size of the R2 Astromech Droid.* Main "body" ball can rotate- Moving the Body part left-right or front-back will also rotate the main body ball.* The eye can rotate up-down or left-right.  .: Textures :.* Six color schemes and material collection files to apply them:- Orange (default)- Black- Blue- Green- Purple- Red  Model by Richard Duda, Poser clean-up by JHoagland. Uploaded here with full permission,
Chariot Cargo Bay (for Poser): Product Features:* Includes one Poser figures (obj, cr2/ png), at 69,251 polygons.* Moving parts:- Large door between the bays, with an ERC dial on the Body.- Large door at the rear, with an ERC dial on the Body.- Two sets of right and left doors in the main bay, with an ERC dial on the Body to open each set.- Two sets of upper doors, with an ERC dial on the Body to open both.- The front hatch can be move to the side, with an ERC dial on the Body.- The stand-up consoles are separate parts which can be repositioned (or hidden/ shown) to suit the needs of your scene.- All eight crates are separate parts which can be repositioned (or hidden/ shown) to suit the needs of your scene.Poses:* Hide/ show each wall and the ceiling.* Hiding and showing the left wall hides and shows the left doors, hiding the right wall hides and shows the right doors.Cameras:* Eighteen camera files are included.* The camera files also hide any walls which may be blocking the camera.* Use these to render your scene or as a starting point.Textures:* One set of textures is included.* This model uses Poser`s shader nodes for extra detailing.* All of the monitor screens use their own texture map, which makes it easy to change the screens and customize the room to suit the needs of your scene.All of the sales images were created using the included camera files.Recommended for use in Poser 6 and above; has not been tested in DAZ Studio.
Fortified Manor (for Poser): This fortified castle sits atop a lonely mountain. The building complex includes a tower, manor (with dining room and grand hall), two exterior buildings, a gatehouse, a well, and more.Perfect for fantasy, medieval, or romantic scenes.Product Features:* Poser figure: obj, cr2/ png, with 19,432 polygons.* Moving parts:- The front Gatehouse can be hidden or shown.- The door behind the Gatehouse can open and close, with an ERC dial on the Body.- The front bridge can be hidden or shown.- The left and right steps can be hidden or shown.- The well can be repositioned or hidden/ shown.- The ceiling and walls of the Manor House can be hidden or shown, which allows you make scenes with the grand hall and dining room.- The Manor House dining room includes a fireplace, a table, and 4 chairs, all of which are separate parts which can be repositioned or hidden/ shown.- Left and right buildings can be hidden or shown.Some of the buildings include a basic interior which you can fill with your own furnishings.Textures:* One set of texture maps, ranging in size from 1024x1024 to 2048x2048 to 4096x4096 pixels with corresponding normal/ bump maps.Poses:* Hide/ show poses are included to change the look of your scene, including:- Hide/ show each building.- Hide/ show left and right stairs.- Hide/ show each wall of the main building.Cameras:* 15 camera files are included.* You can use these camera files to render the scene or use them as starting points.All sales images rendered in Poser Pro 2012 with the included camera presets.This product is designed for use in Poser 5 and above.Original model by Arteria3D and uploaded for sale here with full permission.
Sick Bay (for Poser): Introducing the next starship room for Poser: the medical Sick Bay.This set has 4 beds for examining and recovering patients: 3 along the wall and 1 in the middle of the operating theater. (Beds can be added or removed, depending on your ship`s medical needs.)The doctor's office, located in the center of the scene, allows the doctor to meet with patients or crew members as needed. Product Features:* Includes the following Poser figures (obj, cr2/ png):- Sick Bay room, at 309,456 polygons.- Medical Bed, at 2,757 polygons.- Office Chair, at 14,979 polygons.- Visitor Chair, at 1,320 polygons.Moving Parts:* Like our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.* All of the doors can open and close (with ERC dials on the BODY).* The two semi-circular office doors can open and close (with ERC dials on the BODY).Textures:* One set of textures is included.Poses:* Hide/ show each wall and the ceiling.Cameras:* Ten camera files are included.Scene File:* Includes the Sick Bay in the center of the scene AND includes the beds and chairs in the correct location.* The light set in the included scene file has Ambient Occlusion enabled for the top light.-This will create additional detailing, but may increase render times.Recommended for use in Poser 5 and above, though the Ambient Occlusion lighting will only work in Poser 6 and above.
Transport Pod (for Poser): This is a small shuttle designed for short-term transport. The side benches can hold 3 or 4 people on each side.The rear docking ring fits most starship docking ports, though the shuttle can also land in a hangar bay.Product Features:* Includes one Poser figure (obj, cr2/ png), with 31,854 polygons.* Left and right doors can open (with an ERC dial on the Body).* Includes interior lighting to illuminate the inside.Textures:* One set of textures is included.Designed for use in Poser 6 and above and not supported in any other software.
Toony Alien Poses: 5 Poses and a couple of expresions for the free Toony Alien, they aren't great but they are a start
sensational: a texture set for the V4 Sensibility dress @ http://www.daz3d.com by Kaedric and MagicWeaver
I Love Spring: A texture set for the MFD
Lil Plaid Riding Hood: A texture set for the Little Red Riding Hood dress sold @ Daz3d.com
Buccalicious: Textures set for the Royloo Buccaneer Shirt
Necklace: A texture set for the V4 fantasy collar
Glow for Fairy Wings Deluxe: Glow for Fairy Wings Deluxe sold at daz3d.com
Nighty for the Gretal Dress: Nighty for the Gretal Dress out of the package "Hansel and Gretal" at Daz3d.com
Wisp-O-Rich: A small texture set for the willowisp outfit by Evilinnocence, both in heavy velvet for those winter holiday parties, thank you for looking
The Touch: A texture set for the Angel Shirt by EvilInnocence
SnowPony: A purdy winter tex (or anytime) for the corset dress @ Daz3d.com tested in both daz and poser and works lovely in both, have fun, thank you for looking
SnakeSkinz for Rhi's The Bootz: Beautifully sculpted snake skin constructed by WildFlower was used to customize these gorgous bootz, with delecate and intricate styles and overlays these bootz are sure to please! tested only in poser. No Restrictions Apply I Dana Kallsen proclaim that I made the mat files in this package. I photographed the some of the materials I used to make the mat files from my own clothing. I used resources from the freebies bank at Renderosity the Snake Skin seamless textures came from: WildFlower on sharecg You are welcome to use the textures in this package as you see fit, they were constructed for Rhi's bootz, you will have to ask her permission to use the object "The Bootz" I only own the textures I made, not the right to let anyone to use the product "The Bootz"! Thank You all very much MagicWeaver (aka. DK and Dana Kallsen)
Summer Wine: Textures for the Simple Shawl V4 by elleque at renderosity
Female Body Morph for Apollo Maximus: Hi there I created this FBM for Apollo Maximus. Please read the restrictions. Enjoy, JB Restrictions ------------------- The contents of this zip are free for use with your commercial and non commercial renders and animations. Please do not redistribute these files. See FAQ for futher clarification on whats restricted and whats not. FAQ -------- Q: Can I redistribute any original file included within. A: No Q:Can I use the files included within to make my own morph and then redistribute the new modified derivative work? A. Yes, However it must be free. If you wish to sell any derivative of these files included within the answer is No, make your own from scratch. Im releasing this for free and it will remain free in any form.
School building: The object of the cat is not included. I was for image composition and attached PNG file. This is a school building of Japan.
Mushroom cushion&watching cage: For recycle use
Wire netting death match: The capacity of data is big, and high specifications are necessary for a PC.
UFO 1970 on TV: Present for Viejonagual. This is an old TV series, there are few documents of the image. So, there are many points that are not similar.
Wara Ningyou: Please increase the name of the person whom you want to bless.
Japanese big sentou: Enjoy
Halloween House: This is the very simple house model. For Halloween, I made it. There is the background, too.
Security Room: Requirements:Poser 7 or above. Render process setting 4 Threads. Render proces need 2 Quad processor.
Futakami guillotine model 2009: Let's enjoy it by this to feel happiness.
Vampire_Coffin: Have a enjoy.
Foberghini for DAZ Studio and Poser: Hi, The Foberghini is a car prop for DAZ|Studio and Poser. It is highly posable (17 moving parts), with 4 turning wheels, steering, 3 doors that can be opened, posable interior with steering wheel, shifter, gas pedal, parking break, and console lid, as well as moveable engine and gas cap. The body is moveable separatly for easy positioning of leaning in curves and acceleration/breaking. The car comes with 8 color schemas / textures. The UV templates to create your own MAT files is includes as well. Enjoy! fober (It's not tested in Poser yet. So if you use it and it work, or not, let me know - thanks, fober)
Fober's Metal-Stack Guitar Amp for DAZ Studio: Hi, "Fober's Metal-Stack" Electric Guitar Amp is a prop for DAZ|Studio (and should work in Poser as well) The Stack comes with the 2 mat versions shown in the picture: "FoberStack", and the lesser known "Marshall" ;-) I'm still having problems with the poser files to load the props. Currently it seems the best way is to import the obj file directly from the runtime\geometries\fober folder. Enjoy! fober (If you know how to manualy create correct cr2 files (I don't have Poser) , let me know - thanks, fober)
Fober's Metal-Ax Electric Guitar for DAZ Studio: Hi, "Fober's Metal-Ax" Electric Guitar is a prop for DAZ|Studio (and should work in Poser as well) The guitar prop comes with the 7 mat files shown in the picture: Red, Red-Yellow Sunburst, Strips, Skull, Psycho, Firewood, Translucent Blue. UV Template to create your own MAT files is includes as well. Enjoy! fober (It's not tested in Poser yet. So if you use it and it work, or not, let me know - thanks, fober)
Fober's Metal-Effects Guitar Pedal for DAZ Studio: Hi, "Fober's Metal-Effects" is a Guitar effects pedal prop for DAZ|Studio (and should work in Poser as well) I'm still having problems with the poser files to load the props. In Poser it currently only works if you import the obj file directly from the runtime\geometries\fober folder. Enjoy! fober
"The Hills" environment for DAZ Studio & Poser: "The Hills" is a background environment for outdoor renders with a path leading through some hills and mountains in the background. It includes the ground plane, sky dome, hills & mountains, and a fog layer for distance effect. The set includes 3 props, and 3 plants: *Boulder, *Signpost, *Obelisk, *grass patch, *Weeds, and a tree (38k polygons). "The Hills" is compatible with the Summer and Winter textures included with my "The Lake" set, as well as the light settings for "The Lake" (DAZ Studio). If you like "The Hills" you can purchase "The Lake" to get a beautiful lake location, 16 plants, 10 additional props like a Cabin, Pier, and Row boat, and trees in 4 different details levels: http://www.daz3d.com/i.x/search/searchsub/?sstring=f.ober
AND_ACTION_Movie_set_props: AND ACTION! is a package with 10 movie-set props for POSER and DAZ STUDIO. It includes: CAMERA, TRIPOD, DOLLY, RAILS, LIGHT, MICROPHONE, HEADPHONES, DIRECTORS CHAIR, CLAPPER, MIXER/CUTTER WORKSTATION. The package also includes 18 pose files for the props or M4. PLEASE NOTE: Some of the poses are for M4, and some are for the props. Additionally some of the props needs to be parented to the figure as indicated on the icons! The UV mapping for the clapper is setup so you can easily create textures for it on the following website: http://www.fodey.com/generators/movie/clapper_board.asp I'm not in any way affiliated with this website, and can not guarantee the availability or functioning or the website, or accept responsibility for any other aspect of the website. cheers, fober
Foberghini2_for_DAZ-Studio+Poser_FIX+UPDATE: Hi, This is a second version of the Foberghini car prop for DAZ|Studio and Poser. IT INCLUDES A FIX FOR THE "DISAPPEARING STEERING-WHEEL IN POSER). I HAVE ALSO ADDED A FEATURE CALLED "DRIVING WHEELS". (See screenshots for details) And I have added driver poses for V4 and M4 It is highly posable (18 moving parts), with 4 turning tires, Steering, 3 doors that can be opened, posable interior with steering wheel, shifter, gas pedal, parking break, and console lid, as well as moveable engine and gas cap. The body is moveable separatly for easy positioning of leaning in curves and acceleration/breaking. The car comes with 8 color schemas / textures. The UV templates to create your own MAT files is includes as well. Enjoy! fober
1974 Doctor Who Logo (PC version): The logo from the 1974 Tom Baker era (and later Jon Pertwee as well), as a poser-ready prop.
1974 Doctor Who Logo (Mac version): The logo from the 1974 Tom Baker era (and later Jon Pertwee as well), as a poser-ready prop.
Anubis: This has a special license in the README contained herein. Read this and agree before use. Anubis is the Egyptian God of the Dead. Anubis does not "run, jump, and play".
Beholder:   The beholder (eye tyrant, sphere of many eyes) is most frequently found underground, although it will infrequently lair in desolate wildernesses, particularly when useful in a cartoon. The globular body of this monster is supported by levitation, and it floats slowly about as it wills. This is vastly less silly looking than if it were to roll about on the ground, and is even somewhat ominous. Creepy even. Atop the sphere are 10 eyestalks, while in its central area are a great eleventh eye, which you really probably think of as the first eye, and so does it, and a large mouth filled with pointed teeth, because beholders really do not fancy vegetables one bit. The mouth leads to, well, the back of the mouth, mainly because since this is just an orb floating about in the air with no neck or anything, there's not a lot of use swallowing because there's nowhere to swallow to. Okay, so maybe the anatomy wasn't well thought out on the beholder, but until someone 3D modelled one nobody really thought about what was going on further in there. The beholder, presented here totally free of charge for your rendering pleasure, is in no way related to, nor should it be considered in any way similar to the Gazer from DAZ3D. Nope. Not a bit. And lest you become confused, of course DAZ's Gazer is not at all an obvious or otherwise ripoff of this TSR-created (not that TSR or WoTC could really talk what with all the hobbits and ents, err, I mean halflings and treants, but still...) nobody's ripping off anyone here. DAZ never does anything dodgy whatsoever, so them charging real money (or even treasure types I, S and T) for a thing they totally lifted from D&D is of course in no way able to ever be construed as anything but honest. But if you disagree, just use the real beholder here, painstakingly made to match that first drawing in the Monster Manual, and don't pay a penny to anyone you might misconstrue as being a big old plagiarism corporation. It's all up to you. Just sayin'. In some aberrant variants of beholderkind, the fourth eyestalk is capable of projecting a sphere of snark and sarcasm.I do not restrict commercial renders, but unmodified commercial renders may be prohibited by Wizards of the Coast. (If they are, DAZ is also liable, due to their "gazer" figure.)  
DRD: Diagnostic Repair Drones or DRDs are small robots that move around Leviathans. They are built by the Leviathan as it grows. The DRDs are extensions of the Leviathans consciousness when the Pilot is not in control of them. Because of this, DRDs can be used by crew members to communicate directly with a Leviathan, should the Pilot be incapacitated. The DRDs perform various functions including ship repairs, searching for lost items, and defensive combat using built-in lasers.
Kylo Ren's Lightsaber: Kylo Ren's rather makeshift vented lightsaber from The Force Awakens and The Last Jedi and almost certainly from whatever comes next. That's not really a crossguard. It just looks like one. A real laser crossguard would be dumb. Whilst making this, I kept having to hide the other subtools in ZBrush to see where I was, etc. To do this, you hit a button marked "Solo". This felt... awkward.
B5 Minbari Sha'ann PPG retrofitted legacy prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
Babylon 5 PPG retrofitted legacy prop: This is a rerelease of a blaster model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
Buck Rogers Earth Directorate Laser Pistol: To go with my retrofits, here, have a blaster I've never released before!
Doctor Who Cyber-gun retrofitted prop: This is a rerelease of a model I made in 2009, retextured. The mesh is the same as it was back then but it still works, and the materials and much higher quality new maps are built for Superfly.
Gamma World Mark V Blaster (rebuilt): This is a complete rebuild/cleanup of a model I made in 2002, which was at the time released with no UVs. This now has UVs and they are used to great effect with modern, high end PBR-like PoserSurface materials.
The Orville Planetary Union PM-44 Pistol: To go with my retrofits, here, have a new blaster I've never released before!
Stargate SG-1 Jaffa Staff Weapon refit: This is a refit of the staff weapon included in the Jaffa outfit, now fully textured and set up for use with Superfly!
Star Trek TOS Klingon Disruptor: This is a rerelease of a model I made in 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
V Visitor Blaster: To go with my retrofits, here, have a new blaster I've never released before! This is from the 1980s TV series "V".
Blakes 7 Federation Blaster: Here's yet another one, because I don't think you got enough blasters the other day.
Shen Lung: The most common oriental dragon, shen lung (AKA "shenlong", "神龙", "神龍", "shinryū", "神竜", "Spirit Dragon", or "God Dragon") are wingless, long and four-footed, with a spiked back and tail, whiskers and two horns on the head. Inside the brain is an inextricable magical organ which gives shen lung the ability to fly. These oriental dragons live in rivers and lakes and can breathe air or water.
Fantasy Pipe: A pipe I created for Snow Sultan a few years ago.
Princess Ariel for Elizabeth 2: Princess Ariel, friend to Thundarr the Barbarian and sorceress of great power, for Elizabeth 2 for Poser, from the Thundarr the Barbarian Saturday Morning Cartoon.
Cerebus the Aardvark: Allow me to preface this: Cerebus the Aardvark is a scumbag. He's an anti-hero at best, and usually just a plain villain. He's selfish, drunken, and abusive. Also he raped Astoria when he was pope. Astoria was an abusive manipulator who mentally screwed the Cockroach and ruined many lives, but there's no excuse for raping. Killing her would have been OK. Cerebus the Aardvark was a really good comic up through High Society. It wasn't as good, but was still good, through Church & State when the above villainous act was written. Cerebus will, therefore, be found in your Characters > 3DnD > Villains folder. Cerebus belongs in villains. That's Cerebus. His creator is way more problematic. Dave Sim is a complete jackass. Seriously, the guy is a total piece of crap. He's misogynistic, homophobic, terrified of Marxism in any form, appears to be convinced there's a secret matriarchy running the world, and he may or may not have groomed a 14 year old cosplayer at conventions at one point (though it doesn't appear he ever followed through with that if he did, thank goodness). Also he might have founded his own sect of Islam with exactly one adherent, himself. Let's just hope the scumbag sticks with his vow of celibacy. Oh, yeah, he did that, too. (Can't call him an incel, though!) I don't know how long he's been the way he is. I don't know if in his younger years he just hid it more. I do not endorse Dave Sim nor his views and I do not want my 3D creation of the Cerebus character to be taken as such. It absolutely is not. I am giving you full permission on my part to use this commercially. And here's where it gets interesting: If you are using this to make comic books, Dave Sim gives that permission too. Perhaps a bit unwittingly, but he did. In Cerebus' Guide to Self-Publishing, Sim goes on a rant about copyrights, where one of the things he states very clearly is this: He not only gives anyone permission to make and even sell their own Cerebus comics, he basically dares you to.
Narn: A Narn from Babylon 5.No restrictions placed by me on this content's use. However, the owners of Babylon 5 have their rights reserved and may object to commercial use. This figure is fully standalone and does not require anything else, not even the klingon (I made it before I realised how much I could make out of the klingon).
Scutter: Cheeky maintenance drones on the mining ship JMS Red Dwarf. If you enjoy this product or any of my other items, please consider donating and/or purchasing one of my non-free items to support their continued production! I make no restrictions on this content's use. If you use it commercially, be sure either fair use (educational, criticism, or parody) or that you are authorised to do so (licensed by or representative of Dave TV and/or Grant/Naylor).
V.I.N.Cent.: Maintenance and astromech robot with psionic capacity assigned to the USS Palomino, from Disney's The Black Hole, back in 1978 when they were trying to ride the coattails of Star Wars instead of just buying it. As always, I make no personal restrictions on the use of this content, but unless you are a representative of Disney, you are probably restricted to fair use (educational, criticism, parody) or to noncommercial fan art use within Disney's tolerance for such.
Vorlon: Mysterious aliens of Babylon 5, these cryptic manipulators do battle with the Shadows leaving the younger races to wallow in the collateral damage of that endless war. I place no restrictions on whether renders of this asset are used commercially, but unless your use is fair use (educational, critical, parodical) or you are a representative of someone who owns the original IP (Babylonian Productions, Warner Bros.), you should probably secure permission from them before commercial use.
Elizabeth 2 Loose Jumper (Sweater): A loose jumper (sweater, for the American English inclined), including an "Ugly Xmas" material as well, to keep Liz warm this Christmas. (Not that it's terribly cold in the Pacific Northwest where she was born, but still.)
Time Lord Collar: A Time Lord collar from Doctor Who. It's sized and positioned by default to the 3dnd Klingon, but as a prop it can generally be fit to most figures.Note that while I do not restrict usage, this is based on Doctor Who and your use may be limited. However, that doesn't mean it cannot be used commercially. You might be making a parody or using it demonstratively for some educational purpose. Or, for all I know, you work for the BBC.I mean think about it, it's weird and dumb all these people saying "you can't use this commercially because it's Lucasfilm/Paramount/Disney/whatever" and then someone maybe actually works for the originator of the IP and says "Hm, I would love to put this in the background, it's well made and we can save some time" and then maybe your model would get in a movie or TV show, but they see "no commercial" and it's a pain for the animator to contact you so they go "meh, whatever" and make their own. Boom. You just lost bigtime exposure.Stop being dumb, people. If it's fan art, you don't even really have a say in how it's used at all.
Butterbot: "WHAT IS MY PURPOSE?" To show off the cool fully functional working treads I made. "OH MY GOD." Yeah, welcome to the club, pal.I don't personally restrict use from commercial use, so your right to use the content depends on how you use it.
Baaz Draconian: One of the five types of draconian from the Dragonlance D&D setting.
Krill: For the glory of Avis! Here's a Krill from The Orville. Fully poseable stand-alone figure (once installed--though see below about the prerequisite). This is an add-on for the 3D&D Klingon. But don't worry, that's easy enough, because the klingon is also free and is right here on ShareCG! Just make sure you have it installed first, because the Krill here shares its geometry and a few textures.
Elizabeth 2 Underwear: A set of three bras and three panties for Elizabeth 2: Briefs Boy Shorts Bikini cut panties Shaping brassiere Standard brassiere Sports bra
Crow T. Robot: A Wisecracker! He's Different! This fully poseable figure of Crow T. Robot from Mystery Science Theatre 3000 (aka MST3K) includes special tricks to make the "desk lamp" arms bend like, well, like a desk lamp would, and makes for an excellent robot to add to your bag of... robots. Why are you keeping robots in a bag? Stop that. That's weird. And heavy. Not in a hippy way. You hippy.
Stargate Atlantis Wraith Stunner: Here's another blaster, this time a bit more organic than normal. Because that's how the wraith do.
Luxan: I swear this was in here. And then it wasn't. So here it is again.
Droyne: The Droyne are a Major Race inhabiting scattered worlds within an area slightly larger than the region of the current Third Imperium. This species originated on Droynia and developed intelligence. The history of their evolution remains a puzzle because their home world is not known with certainty. However, it is theorised that the Droyne are a small race derived from winged omnivore/gatherers. Although the Droyne are well known as a race, and have been the subject of extensive research by academics, it is only recently that a hypothetical relationship between the Ancients and the Droyne has been even partially understood.
K'kree: The K'kree are among the most massive of the major Traveller races. They bear some resemblance to the centaurs of ancient Terran myth, a trait noted by the earliest human explorers. These creatures are vegetarians, and are even more militant about it than PeTA members. However, they are far less annoying and they don't kill animals.
Achaierai: Though the foul motives which caused these loathsome birds to be first summoned from the infernal regions are now lost from memory, remnants of the original achaierai flock still stalk the earth, haunting shadowy places and underground passages. In form they consist of a huge spherical head-body, with a powerful beak and feathery crest, atop four long legs ending in strong claws. The achaierai often travel in groups and, though a group need never check morale, each individual bird will try to flee if it loses a leg. Though flightless (the rudimentary wings are scarcely visible and will not support flight), a bird often eludes pursuers with its long strides. Its movement rate is unaffected by the loss of a single leg, but the loss of two legs halves movement rate. An injured leg will regenerate fully in about two days but the birds do not possess other regenerative powers and a leg which has been completely lost will not be re-grown. Anyway, they look like Angry Birds on stilts.
Borg Drone: We are the Borg. Your biological and technological distinctiveness will be added to our own. Resistance is futile. This is a character (with its own CR2) and conforming "clothing" set for the 3D&D Klingon (available free here too). You will need to install the Klingon figure first to use this package.I do not restrict commercial renders. The legality of your use of this product depends on the manner in which you use it.
Tortle: It's a fully posable humanoid turtle.Nuff said?
Discovery Klingon: Another add-on for the 3D&D Klingon (required prerequisite, but free right here on this site), it's the final of the four "subtypes" of Klingon: Discovery Klingons. Season 2 hair not included, because you can use any hair you want (Mike 3 hair fits best, but all hair requires minor adjustments). Includes a CR2 for the Discovery Klingon, pre-loaded with the Discovery morph and dark texture, geometry and conforming CR2s for the armour (boots and top), and MC6 MAT poses for dark and pale skinned variants, and for red, silver, and the default iron colours for the armour/ Thank you all for your donations. Keep the coming and I'll keep stuff coming! As always, I make no restrictions on whether you make commercial renders, because you might be with Paramount or have another legit way to do so (fair use). If neither, you had best get permission from Paramount first before using this for anything other than fan art.
Dralasite: Possibly related to Gleep, Gloop and Schmoo, the protean/ameoboid Dralasites inhabit the universes of Star Frontiers from TSR and, later, Star Law from Wizards of the Coast. In all honesty, it's not entirely possible to build a really proper Dralasite in Poser, what with their ability to randomly extrude limbs and so on, versus Poser's ability to not let you even think about being able to do that. However, I've given it a shot anyway and made a figure that resembles the most common formation of these guys shown in illustrations: 3 legs, two arms, some fingers, a blobbish headdish part. It may seem simple but it's not as easy as it looks. Enjoy! This has been updated for new and improved rigging (requires at least Poser 9 for the rather extensive weight mapping used), and new textures. Yeah, I know there's not a lot to the texturing of these, but it really does look nicer now!
Bloat Herb: A deadly, carnivorous, gassy, flying, mobile plant.
Edosian: From the Animated Adventures of Star Trek comes this tripedal orange replacement for Chekov. Fully rigged and textured for Superfly and includes expressions and basic Mimic phoneme morphs, as  well as a 2265 issue Starfleet uniform modified to suit his three-armed form, textured as a Lieutenant Commander as per Arex, the example (described as a secondary helmsman in the series, but stationed as a navigator). Hey guys, see that "Donate to Dodger via Paypal" button over there? It actually works. It really does. I know it does because someone used it once. ONCE. Get my drift? I'm out of work and COVID isn't over as of this upload, and I'm pushing 50, so getting more work isn't going to be super easy. Unemployment only goes so far and if not for a global pandemic would have been over with a year ago anyway. What I'm saying is: I don't have a lot of money but I have too much free time. As entertaining as making these things may be, it doesn't pay the Internet and rent. You may notice that my websites are down. That's because they cost money. I used to have a Patreon, too. I stopped having one after six years of not getting a single donation. I know you all aren't rich. But seriously, if you like the content, throw me a fricking bone here, guys. Hit the donate button even if it's only for a bloody dollar or two. Pay me what you think the content I create is worth. Gold stars are nice but dead presidents are even better.  No restrictions on the use of this content are made by me, but since this is based on a property of one of: Paramount, ABC, or Filmation you will need to research the ownership and secure permission from the character owners if fair use* does not apply. This content itself was created for and is supplied for educational purposes, with a hint of parody considering the obscure and somewhat silly source. (* Note: Fair use in the US only applies to the following uses: Education, Criticism, and Parody. "Entertainment" is not part of fair use. Apparently I need to say this after seeing 43,289,685,920,654 idiots on YouTube who stupidly think that writing "I do not own this. This is for entertainment purposes only" absolves them of all responsibility under copyright laws. Like, seriously? WTF? How dumb can they be? Dumb enough to invent tribbles. Dumb as Edward. That's how dumb.)
Black Dragon: The black dragon is typically found in miasmal swamps or marshes, although they also inhabit subterranean lairs as well, for black dragons always seek to lair in deep, dark caves. They tend towards the mid point between law and chaos in their evil. This figure includes detailed displacement and bump maps to enhance the surface details and may be slow to render, depending on your settings. The black dragon's acid-spit breath weapon has not been included at this time, but may be added to the package at a later date when Dodger works out the best way to fake liquid dynamics in Poser. Until then, using actual liquid dynamics or postwork may be your best approaches to showing the breath weapon. The wings make extensive use of weight mapping combined with trickery to give you fully posable wings with only 3 sections each. Older Posers without weight mapping always suffer when weight mapping is used, but perhaps more than usual in this instance. One other thing about the wings: Dodger has made a specific intentional deviation from the wings shown in the Monster Manual, while trying to maintain the "spirit" of the drawing. In the original Dragon drawings, several of the dragons have "fan wings"—things that look more like the fin on the back of a dimetrodon than actual wings. When these occur, Dodger will be making the wings different, using a full-spread style wings that works similarly to a bat's wings but including the thumb for a wider, more forward spread with more surface area that gives a similar feel to the "fan wing" effect. This is because despite his attempt to remain faithful to the original art, in this instance the original art is just plain far too bloody stupid and Dodger cannot bring himself to make those moronic "fan wings" nor to insinuate in any way that they would even assist with, much less add the capability of flight. We hope you're okay with that. Updated June 2019 for improved rigging and textures.
Androsphinx: An androsphinx for Poser. That's not the riddle kind. It's just the eats you kind.
Creeper: A more realistic take on a dreaded, exploding foe.
BSG Cylon Blaster (1978): To go with my retrofits, here, have a new blaster I've never released before!
Farscape Luxan Qualta Blade: This is a solo release of my Luxan Qualta Blade included also in the Luxan figure (available here as well). The materials setting are slightly improved.
Star Wars Boba Fett Blaster retrofit legacy prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
Star Wars S-5 Naboo Blaster retrofit legacy prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
Pierson's Puppeteer: Paranoid, three-legged aliens from Larry Niven's Known Space stories, including Ringworld. No restrictions are placed by me on whether this content's use is commercial or not, but if not used under the fair use doctrine or by a licensed or otherwise authorised person, Larry Niven may restrict such use.
Chalmun's Cantina Extras: A more wretched hive of scum and villainy! Yup, it's the remaining bits that turn Dodger's Space Frontier Cantina on VanishingPoint definitively into Chalmun's Cantina! (But yeah, the rest of the place is for sale, so you have to buy that to get everything else.) High res textures on 5 additional props make the final touches to complete your space tavern in style. Includes: Entry Vent (the vent thing over Luke's head as he's walking in) Han's Cup (yeah, Han has his own cup. Is it a Solo Cup? Wall Railing (in the scene where Han shoots and Greedo never shoots because he's dead there's a railing, This was shot on a different set, so it's included here for booth 2, but it fits booths 3, 4, 5, 6, 7, 8 and 9 too.) Droid Detector (so the bartender can yell at you about robots) (Note: Apparently no longer in use, since there are droid BARTENDERS in there now! WTF!?) Taps (complete with stylized IG-unit heads, which are actually parts from a Rolls Royce jet engine... and drinks are being served out of them? Eww.)
Warforged: A sentient golem-like construct from the world of Eberron. Basically, a magic robot.Because I kept this very close to the inspiring artwork, and the fact that that art is pretty distinctive, I can't sell this, so please consider donating or also buying a product from me if you like this and find it useful.
Titanothere: Titanotheres, or Megacerops, once roamed the plains of what would become North America. They are related to horses and rhinoceroses, and closely resemble the latter despite being closer to the former, and their fossilised remains have been found worldwide.
Vogon: The Hitchhiker's Guide to the Galaxy has this to say about Vogons: "Here is what to do if you want to get a lift from a Vogon: forget it. They are one of the most unpleasant races in the Galaxy—not actually evil, but bad-tempered, bureaucratic, officious, and callous. They wouldn't even lift a finger to save their own grandmothers from the Ravenous Bugblatter Beast of Traal without orders signed in triplicate, sent in, sent back, queried, lost, found, subjected to public inquiry, lost again, and finally buried in soft peat for three months and recycled as firelighters. "The best way to get a drink out of a Vogon is to stick your finger down his throat, and the best way to irritate him is to feed his grandmother to the Ravenous Bugblatter Beast of Traal. "On no account allow a Vogon to read poetry at you." Contains one Vogon, clothing for said Vogon (which is a good thing, because he has as much sex appeal as a road accident), hair, a pose, and a microphone (which is a bad thing because he is almost certainly going to use it to read his poetry at you).  As always, I make no restrictions whether this can be used for commercial use or not (provided you are not someone I have chosen to not extend a license to as per the README). If you are authorised to create works by the Douglas Adams estate or any sublicensee thereof, or if you are using this work in a manner that falls under the definition of fair use, you may use it commercially as well as non-commercially (again, unless, of course, I have specifically restricted you from using the asset at all, and see if I don't!).
Elizabeth 2 Summer Clothes: Casual summer activewear for Elizabeth 2 Includes: Shirt Shorts Sneakers with socks (combination conformer)
Elizabeth 2 Banana Costume: This is just a banana costume for Elizabeth 2. It's in no way sensible. Features include: 2 Arms 2 Legs Banananess
Diana, the Acrobat for Elizabeth 2: "...and Acrobat", Dungeon Master said as a a glowing green quarterstaff appeared in Diana's hands. Instantly, she knew how to use it together with the gymnastics she trained for in high school. She launched into an attack on Tiamat immediately. This is Diana, from the Dungeons & Dragons cartoon! For Elizabeth 2, available FREE from https://www.whatever3d.com/store/products/Elizabeth%202
Anhkheg: The anhkheg (also spelt "ankheg") burrows through the earth like an earthworm preferring soil rich in minerals and organic matter. Thus it will usually be found in forests and choice agricultural land. This causes farmers great consternation, since the anhkheg likes to supplement its earthly diet of soil with a bit of fresh meat, human or otherwise. Since its mouth is not designed to rip and tear meat, its mandibles crush its prey and secrete a digestive enzyme causing an additional 1d4 points per turn until the prey is completely dissolved. If sorely pressed in battle it is able to squirt its digestive acids 30 feet once per six hours. However when it does this it cannot digest anything for the same length of time, so it usually will bite. A squirt of digestive acid causes 8d4 hit points of damage to the creature struck, half the amount if the creature makes its saving throw. The anhkheg's favourite method of attacking is lying five to ten feet underneath the ground until its antenna detects a likely victim passing overhead. Then it burrows out directly underneath the prey and grabs it. Description: The anhkheg has a chitinous shell which is brownish in colour. Its underside is pinkish. The creature's eyes are glistening black. The "spotted" colour variation has been removed, though elements of it have been integrated into the all new PRB-like superfly-compatible textures, added in July 2019 (as well as rigging improvements to the antennae). (Note that even using the included "Monster Manual" pose, you will need to adjust your camera's perspective or lens size to get the heavy foreshortening as drawn in the illustration and shown here.)I don't restrict commercial use, but Wozards of the Coast may. It kind of depends on how you use it.
Wyvern: Cow not included. Go catch your own.
Lego Spaceman: Maybe it's just me, but sometimes I want to know what a highly stylised design or toy might look like if done more realistically. Of course, the more stylised, the more you're just "making stuff up", but that's fine, too. That's creative, or so I like to tell myself. So without further ado, here's a Lego Spaceman outfit for the 3D&D Klingon. It's in red. Red and white came first, followed by yellow and then blue. It's not blue, and the helmet isn't broken, so it's not a realistic Benny. Sorry. But, I mean, you could make it blue, right? I make no restrictions on how you use renders from this.* I won't even try to pretend to be able to imagine what the Lego company will think, but they probably won't want their logo used commercially without permission, so unless it's fair use that they can't do anything about, probably don't.* Unless you are that one sleemo, who can't use it at all.
Elizabeth 2 Dancewear: A set of three dancewear conformers for Elizabeth 2. Not stripper clothes, but, like, the sort of thing that an interpretative dancer might wear. The obligatory Catsuit Leotard Unitard
Alien Pilot for 3D&D Klingon: Way back in the 1970s, before Star Wars action figures, Fisher-Price started a line of 1:18 scale action figures first. Of course, when Star Wars action figures proved popular, FP decided to try to get in on that. Rather than licensing anything, they made up their own science fiction figures, often kitbashed from their other figures. The Alien Pilot was a normal male head, but in green and with blue hair and yellow eyes (the same head used for their X-Ray Man figure), and the body was their astronaut figure cast in black and painted with silver and blue details. All they needed to add was a classic bubble helmet, so they did. This is a Poser interpretation of that action figure. Textures and details have been added to give it a more interesting finish, and proportions have been modified (1970s and 80s action figures were very often a proportional disaster). This is a free ADD-ON the the (also free) Klingon figure found right here on ShareCG. You have to get that one first, because it uses the same geometry and the "TOS" morph from that package, as well as reusing a few maps. For your convenience, however, this is provided with an actual CR2 for the figure. Just make sure you've installed the Klingon first, so it will load. (Oh, and look! I don't suck at hair anymore!)
Fatu-Krey: A Fatu-Krey from Galaxy Quest character for the 3D&D Klingon. This requires you have the 3D&D Klingon, but don't worry, it's free here on this site. This includes two headdresses -- one simple "spiky metal mohawk" as seen on one of the officers, as well as General Sariss's "lobsterhead" headdress. Add to that earrings, an eyepatch prop (as per Sariss's after his injury at the beginning of the film), a MAT mc6 for General Sariss's warpaint, and conforming boots, cuirass, gauntlets, pauldrons, trousers, undershirt, vambraces, and hip armour and all you need is the morph, which comes in the form of a prepared CR2. Materials are optimised for Superfly. As always, I make no restrictions on your use between commercial and noncommercial use, so unless you are someone restricted from using the assets at all (it's in the README, but that smeghead knows who he is), you can do as you like. However, Dreamworks Pictures may restrict you from using things commercially. Unless you work for them, of course. That's up to them.
Thriddle: One of the weirder looking species from the Skyrealms of Jorune role-playing game.
Athshean: From Ursula K LeGuin's "The Word for World is Forest", these are the critters James Cameron ripped off, turned blue, and fetishised to make his weird Ferngully in Space movie.
Poses of Honour and Glory for the 3D&D Klingon: By popular demand! For the idle! (Wait, I never said that. Someone did though.) 50 poses to use on the 3D&D klingon with a focus on action and a secondary focus on humour—because the main points of klingon existence are fighting and taking the piss out of Worf. This pose set is intended for the 3D&D Klingon. No restrictions on the use of these poses is made, provided that they are not redistributed in whole or in part, including further poses derived from them, because that would sort of defeat the purpose of me selling them, wouldn't it? [Ferengi note: IT'S ONLY 10¢ A POSE! TEN CENTS!! ONLY SOMEONE WITH NO LOBES AT ALL WOULD PASS THIS UP!] Qapla'!   (Special Exception Note: neither this, not any of my content, is for sale to the user who goes by EldritchCellar. If that petaQ goes through the motions of "purchasing" this pose set, any money paid will be considered a donation in apologia, but no license to use the content will be granted. This statement expressly overrides, supercedes, and quitclaims any other agreements or considerations associated with purchase through ShareCG or other sites in this specific individual's case.)
Elizabeth 2 Swimsuits: A set of swimwear for Elizabeth 2 including: Two different bikinis A one-piece bathing suit (different from the one that comes with E2) A third bikini bottom
Dodger's Matter: A set of 72 PoserSurface procedural materials, focusing mostly on metals and crystals. Includes 21 Crystalline materials:AmethystAquamarineChrysoberylCoke BottleDiamondEmeraldGlassImperial TopazJadeKryptoniteKunziteMalaia GarnetMali GarnetMexican Fire OpalRhodolite GarnetRubySapphireSpinelTopazTurquoiseZircon 36 Metals:AluminiumAluminium (Anodised Red)Aluminium (Pure)BrassBrass (Polished)BronzeDark BronzeChromeBlack ChromeBright ChromeChrome Gold TintedCobaltCopperCopper (Red Bleached)Copper WornGoldGold (14k)Murgo GoldWhite GoldHematiteIronIron (Forged)Iron (Old)Iron (Rough Polished)Mirror FinishNickelPainted GoldPewterPlate ArmourPlatinumSilverSilver (Polished)SteelSteel (Bright)Steel (Bright Shiny)Titanium 15 Organic/Plastic:Black WalnutBoneCharcoalFabricGlossy Paint JobLatexLeatherPlasticPlastic (Glossy)Plastic (Matte)Plastic ArmourPlastic Armour (Matte)Plastic (Thermoformed)Glow-in-the-dark PlasticRubber Tyre
Plant Collection 1: An assortment of plants, most of which should never appear together, despite this rendering.
TARDIS Corridors (2010): TARDIS Corridors as seen in the episode "The Doctor's Wife". These are significantly different from the TARDIS corridors shown in Journey to the Centre of the TARDIS or The Invasion of Time or The Mask of Mandragora or any other episode showing them much.
TARDIS Corridors (2013): TARDIS Corridors as seen in the episode "Journey to the Centre of the TARDIS". These are significently different from the TARDIS corridors shown in The Doctor's Wife or The Invasion of Time or The Mask of Mandragora or any other episode showing them much.
Galaxy Quest Nebuliser: To go with my retrofits, here, have a new blaster I've never released before!
Star Frontiers Laser Rifle rerelease: This is a rerelease of the Laser Rifle included in the Sathar figure (also available here), with slightly improved materials.
Star Wars DH-17 Rebel Blaster retrofit legacy prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
Star Wars DL-44 Heavy Blaster retrofit legacy prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly. This is Han Solo's blaster, and the scope is a separate prop.
Star Wars WESTAR-34 Blaster retrofit legacy prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly. This is Jango Fett's blaster, of which he carries two.
Traveller Droyne Laser Pistol: This is a slight refit of the blaster included with the Droyne figure (available here). Materials and textures have been slightly improved.
Elizabeth 2 Face Mask: Protect your Elizabeth 2 from COVID19 (or, more realistically, use E2 and Poser as a reference or image source for some very important messages to get out on the off-chance anyone has somehow been living under a rock for the last month).Elizabeth 2 is a free standalone Poser figure and is also available on here. That means if you post down below asking where to get her, you're dumb and need to read the whole thing.
Minbari: A Minbari from Babylon 5 (of the Warrior Caste, from the clothing) for the 3D&D Klingon. Includes boots, trousers, top (with pauldrons etc built in), gloves, and duster/robe, as well as the head bone which you will find under "Hair". You need to have the 3D&D Klingon installed (also free on this site) to use this. The figure does, however, include its own CR2 with the head bone and morph pre-loaded and activated.  As always, if you're allowed to use this at all, I make no restrictions on whether it's commercial or not, but Foundation Imaging, Babylonian Productions, and J Michael Straczynski may have other opinions. If you don't work for them, make sure you have their permission before using this commercially (or don't use it as intended and make it not a Minbari).
Elizabeth 2 SInglet (Tank Top): Another shirt for Liz, here's a loose, oversized singlet (tank-top/vest/wifebeater/whatever you want to call it). Includes 5 musicians showing that she enjoys all types of music (except country)!
Xenomorph Facehugger: Just when you thought it was safe to go back into space. It's... it's not. Because space is really dangerous. Like, even without these. But it's worse when there's something shoving eggs down your throat into your stomach with the knowledge you'll be killed when it claws its way out later. Yeah, you'll notice that Elizabeth, in this picture, is not only wearing a red starfleet uniform but also... Elizabeth... at her, you know, default E2 setting... in a horror film scenario... she was really kinda very, very doomed, huh?
Imperial Stormtrooper: The classic 3D&D Stormtrooper armour, adjusted, remapped, trimmed down where possible, and refit to the 3D&D Klingon (though since the body will be completely covered and you can only see a slight amount of eyes through the visor lenses, you may as well consider it stand-alone, for all practical purposes). Includes MC6 MAT poses for "Filthy" (a la The Mandalorian) and "Spitshine" (almost perfectly clean for a coming up Imperial inspection) as well as the default "mostly clean but OK, maybe a little grimy in the corners" materials. This includes a Smart Prop and MAT poses for the BlasTech E-11 Imperial Stormtrooper Blaster Rifle (also given away here). To use these, you will need to have that installed. Note that if you used the previous M4 version, this is in fewer parts. The boots and greaves are together, the torso is grouped together, and so on. Also, the pauldrons (upper shoulder armour) are "free floating" children of the shoulder body parts. They will follow the pose of the shoulders, but you can translate and rotate them to fit properly over the arms when down or raised for a perfect fit. Speaking of fit, the Bodystocking underclothes suit has morphs to fit tightly to the Klingon and to "shrivel" in places the armour covers it to better avoid clipping (what Poser users mis-call "pokethrough"). Of course, it's still solid armour so don't expect anyone to be doing yoga in it. If it can't be fit in a certain pose, change the pose because that means the armour doesn't work like that. As always, I make no demands on whether you use this commercially or not, as long as you're not that dude I don't allow to use my stuff, but if you don't work for Disney and you don't have Disney's permission, you'd better be really solidly certain any commercial use (or, especially in their case, even any noncommercial use that they just might not approve of) falls under the definitions of fair use as established in your locale.
Yazirian: Yazirians are a space-faring sentient mammalian species which inhabits the worlds of the Frontier Sector. They are one of the four basic "PC Races" introduced in the Star Frontiers role-playing game. Yazirians are tall, light-boned humanoids with furry manes around their necks. The other three Core Races have nicknamed them "monkeys" because they look like chimpanzees. Thin membranes that stretch between their arms, torso, and legs allow Yazirians to glide short distances. They are generally the smartest of the four Core Races, but are also the most warlike. ("Monkeys" are still laid-back and timid compared to Sathar, however.) Despite being pushy and aggressive, Yazirians are neither as quick as Vrusk nor as strong as Dralasites. Their eyes are very sensitive to light, so they must wear dark goggles during the day. This figure includes several poses. Sometimes it's hard to select the Collars and Shoulders due to the weird geometry. Try selecting near the actual centre (in the wing membrane), or use the selector menu. Bodyhandles are provided for more control over the wing membranes, as well. These creatures have reappeared in other TSR products, first as Shadowpeople in Dragonlance, then as Hadozee in Spelljammer, and then reappearing as Yazirians in d20 Modern: Future. They are very similar to High Martians from Space 1889. A character using this figure is planned for those.
GE-5P: From the depths of the '70s comes one of the most infamous R2-D2 knockoffs ever created: Playmobil's GE-5P from their Playmo-Space line! With a transparent dome long before R3 units, GE-5P answers the question: "What if an astromech had hands?" And the answer is, of course, that it would push a big blue wheelbarrow around on the moon or carry some sort of yellow grabby device, somewhat pointlessly as it already has robot hands!
Blue Dragon: Blue dragons typically prefer deserts and arid lands; like others of their kind their lair is always some vast cave or underground cavern. Detailed normal maps bring this figure to life and create a uniquely dragony dragon you just can't make from that other, expensive dragon. Complex weight mapping makes for fully posable wings bringing life to your Dungeons & Dragons renders. Updated June 2019 for improved textures and rigging.
Farscape Leviathan Transport Pod: There doesn't seem to be another 3D model of this anywhere. So I made one. This is external only. There is no interior on this prop. Frankly, the interior sets don't seem to fit inside the exterior prop used in the show (as is actually pretty common). Also I can't find anywhere they ever showed anyone getting in and out, so it's not even certain the material I marked "door" is a door, or whether the back should open or something or even something more elaborate. Since I didn't want to just "make it up", and I did not need it for those purposes anyway, I didn't do the insides at all. 
Kelvin Klingon: Three out of four done now. This is the Klingon design shown in Star Trek: Into Darkness. I think they look pretty neat. It may even be the only worthwhile thing about that film! Requires the 3D&D Klingon by me here on this site be installed first. Contains a custom CR2 for the Kelvin klingon with the improved Kelvin-Abramsverse morph turned on and memorised, and the textures all loaded and stuff. Also contains boots, trousers, and top (including gloves) conformers, plus two props: helmet and head piercings.  I've gotten a few donations now. Thanks guys! You're awesome! And so here's another Klingon! Enjoy! I place no restrictions on this content's use, but Paramount might. But, I mean, Paramount can even use it (though a heads up from them would be nice just so I can go "cool!"), so to say "no commercial use" wouldn't make sense. And anyway, there are three branches of fair use: Parody, Criticism, and Education.
Elizabeth 2 Mini-T: A conforming mini-T (ringer style) to fit Elizabeth 2
She-Ra for Elizabeth 2:   Protector of Etheria, and descendant of the royal line of Eternia, She-Ra once defended Saturday mornings against He-Man's testosterone. Also villains.  
Elizabeth 2 Textures: Elizabeth 2, Whatever3D's premiere model, is changing the face of the Poserverse. With revolutionary joint parameters, posable facial features, anatomically correct elements and more, E2 is the flagship creation of Whatever3D. Elizabeth 2 includes everything necessary to pose, animate, change materials, and more. Head and Body skin textures are provided separately in free or affordable packages. Clothing, hairstyles, and accessories are available as add-on items for Elizabeth 2 as well. Elizabeth 2 is the one figure you want to make sure you own. And she's free! Includes: Elizabeth 2 Core Figure Elizabeth 2's Swimsuit Elizabeth 2's Hair, African Short Cut Elizabeth 2's Core Textures Materials Include: Light African (default) Dark African (darker African skin-tones) Asian (a darker-toned Asian skin) European ("Caucasian/White", also works for lighter Asian skin tones) Latina ("Hispanic" Latin American tan tone) Tan (lighter skin tone with a tan and tan lines to match the swimsuit Ruddy (darker complected "Caucasian" tone) Pale (light skin tone) Super Pale (paper white skin tone) Goth (pale with dark makeup) Barsoom (bright red skin tone) Barsoom Dark (darker red skin tone) Blue (blue alien skin tone) Drow (ebon black skin tone) Green (alien green skin tone) Mutant (pale green skin tone) Yellow (alien yellow skin tone—or exaggerated jaundice) Elizabeth 2 Base Poses Includes: Against the Wall Alight Arise Arms Raised Bent Over Channelling Contraposto 1 Contraposto 2 Cornered Dance 1 Dance 2 Dance 3 Dive Explorer Fashion Flight Flying Side-kick Karate Stance Kneeling Lying Down 1 Lying Down 2 Melee Pistol Stance Power Walk Run Sitting 1 Sitting 2 Superhero Landing (Note: This is a texture set, just one of several packages you will need for the full Elizabeth 2 product)
Elizabeth 2 Cybergoth: Take Liz out to the club!
Aslan (Traveller Race): The fteirle, called the aslan in Anglic after the first solomani to meet them decided they looked like lions, are a major race of warriors in the Traveller role-playing game, occupying a portion of charted space. Aslan stand roughly human-sized, averaging 2.0 meters in height and weighing about 100 kg. They have a single highly specialised dewclaw under each thumb which folds back jackknife fashion into a horny covering in the base of the thumb and palm. There are two sexes, male and female. The most notable external difference is the increased size and mane of the former. Females outnumber males by 3:1 Aslan have a conventional carbon-water based biochemistry. They breathe a conventional atmosphere of nitrogen and oxygen, and exhale carbon dioxide.I do not restrict commercial renders, but using this without any changes commercially may violate the rights of GDW, Mongoose, or subsequent owners of the Traveller RPG, or of Larry Elmore who draw the illustration on which the outfit is based.
Badder: A badder from the Gamma World role-playing game. With armour, shield, spiked mace and dagger.I do not restrict against commercial use of renders, but unmodified commercial use may violate Larry Elmore's or Wizards of the Coast's copyright.
Black Hole Sentry Laser retrofitted legacy prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
Gharton: Evil insectoid foes to defend them ruined temples against the naked vickies and so on.
Goblin: Scurrying amidst the dark ruins underearth, these not-very-dreaded but definitely disliked dungeon denizens can still pack a punch when there's an army of them
T3-M4: Proto-astromech droid from the Star Wars: Knights of the Old Republic video games. This is an original mesh based on the appearance in those games, not a rip of the actual geometry; particularly, it is higher resolution than games of that era would have supported (and therefore more suitable for Poser use). I personally make no restrictions on the use of renders of this content. If you are not Disney or a representative agent thereof, commercial use would be restricted to that which falls under fair use laws (educational, criticism, or parody). If you are a representative of Disney, of course you can use this commercially in any way you like. Also: hire me.
Dodger's Brain: It's Dodger's brain, in a jar! Includes a bell jar and wires to hook up to a brain figure, which is also a special conformer for Michael 3 or the 3D&D Klingon, designed to conform with 100% clipping ("poke through") -- because it fits INSIDE the figure!
B5 Narn Kalat PPG: This is a rerelease of a blaster model I made recently and included with the Narn figure (available here as well), retextured and released solo.
Farscape Peacekeeper Pulse Pistol: To go with my retrofits, here, have a new blaster I've never released before!
Star Frontiers Laser Pistol: To go with my retrofits, here, have a new blaster I've never released before!
Andromeda Force Lance: To go with my retrofits, here, have a new blaster I've never released before!
Star Trek TMP/TNG Klingon Disruptor: This is a solo rerelease of the disruptor that comes with the 3D&D Klingon figure (available here), with improved textures and material settings.
Star Wars E-11 Imperial Blaster refit legacy prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
Playmobil Spacemen: Continuing on the exploration of what certain stylised astronauts might look like if they were more realistic, here are the 70s and 80s versions of PLAYMO-SPACE spacemen figures from Playmobil. For the 3D&D Klingon. Look around on ShareCG and you'll find I've already made GE-5P, the Playmobil R2-D2 knockoff, so your figures will have a companion. I might make some of the tools and gear--radios, drills, grabby things, inscrutable things that look like snorkels with handles, and a sort of laser-torch (but not like a cutting or welding torch or a flashlight, but rather like the sort you hold up in a dungeon, except high tech)--though I'm trying to think of how to, and how much to, de-stylise them as they are not much more complex than a Lego tool. I also have a half-modelled Playmobil space station. Yup, the whole thing. (Well, OK, not the whole thing because it's only half done, but it's meant to be once it's done.) As always, I don't restrict what you can do with renders from this (provided you're not banned from using the assets altogether--you know who you are), but if you use it in a for-profit commercial way that isn't protected under fair use conditions, then the makers of Playmobil might have something to say about that. It's admittedly a little bit fuzzier with toys than with stuff from movies and TV, but copyright may apply. Probably does. (Anything made after the Berne convention that can be copyrighted is, but some Playmobil designs are actually older than that, and design patents don't apply unless you're making other toys from them. This may be one of the fuzziest IP law areas known.)
Elizabeth 2 Poses: Elizabeth 2, Whatever3D's premiere model, is changing the face of the Poserverse. With revolutionary joint parameters, posable facial features, anatomically correct elements and more, E2 is the flagship creation of Whatever3D. Elizabeth 2 includes everything necessary to pose, animate, change materials, and more. Head and Body skin textures are provided separately in free or affordable packages. Clothing, hairstyles, and accessories are available as add-on items for Elizabeth 2 as well. Elizabeth 2 is the one figure you want to make sure you own. And she's free! Includes: Elizabeth 2 Core Figure Elizabeth 2's Swimsuit Elizabeth 2's Hair, African Short Cut Elizabeth 2's Core Textures Materials Include: Light African (default) Dark African (darker African skin-tones) Asian (a darker-toned Asian skin) European ("Caucasian/White", also works for lighter Asian skin tones) Latina ("Hispanic" Latin American tan tone) Tan (lighter skin tone with a tan and tan lines to match the swimsuit Ruddy (darker complected "Caucasian" tone) Pale (light skin tone) Super Pale (paper white skin tone) Goth (pale with dark makeup) Barsoom (bright red skin tone) Barsoom Dark (darker red skin tone) Blue (blue alien skin tone) Drow (ebon black skin tone) Green (alien green skin tone) Mutant (pale green skin tone) Yellow (alien yellow skin tone—or exaggerated jaundice) Elizabeth 2 Base Poses Includes: Against the Wall Alight Arise Arms Raised Bent Over Channelling Contraposto 1 Contraposto 2 Cornered Dance 1 Dance 2 Dance 3 Dive Explorer Fashion Flight Flying Side-kick Karate Stance Kneeling Lying Down 1 Lying Down 2 Melee Pistol Stance Power Walk Run Sitting 1 Sitting 2 Superhero Landing (Note: This is Elizabeth's default pose package, just one of several packages you will need for the full Elizabeth 2 product)
Elizabeth 2 Jeans: A conforming pair of jeans for Elizabeth 2, with three material settings (textured, procedural, and procedural double black)
Bulette: The bulette (or landshark) was thought to be extinct, what with John Belushi dead for quite some time and all, until recently when this horror reappeared in the early 1970s as a plastic toy alongside rust monsters, owlbears, and some sort of armadillo-bunny in a cheap Chinese package marked "Prehistoric Creatures" in the five and dime. Of course, those early 1970s were also when D&D was just getting started, and the lack of Ral-Partha and so on, yet, meant Arneson and Gygax and company had to get miniatures where they could. packages of small plastic dinosaurs were pretty useful as dragons, and so... hey, will you look at that, what the hell is THAT thing? Better make up stats. Looks kinda like a... some kind of land-shark. Hm. Also kinda bullet shaped. I dunno. well, let's slay it. The description given in the Monster Manual states that the bulette is coloured blue-brown. If any of you die and there actually ends up being an afterlife, do me a favour. Track down Gary Gygax and inform him that that's not a bloody colour. Updated July 2019 for improved rigging and textures.I do not personally restrict commercial renders. The legality of commercial use of a render you do depends on your manner of use.
Cyberman (Invasion-era): First discovered on Mondas, a twin planet to Earth, the cybermen have returned many times to attempt to conquer Earth, always followed by The Doctor, ready to stop them. Later evolutions showed the cybermen developing full armour, merging with the cyberman of a parallel universe, and so on, but this one is designed off a late 1960s version fought by the Second Doctor in Invasion and Tomb of the Cybermen. Updated June 2019 to improve materials and make shaders Superfly-compatible.
Demogorgon: Rivalry between demon lords is great, but the enmity between Demogorgon and Orcus is immense and unending. Demogorgon is a terrible opponent. First, he possesses great powers in his two.. heads... I... I can't help it. I can't stop. He's got MONKEY HEADS. Sorry. OK. I think I'm under control again. Should he fix the gaze of both upon his enemies, he is able to hypnotize... Nope. Sorry. MONKEY HEADS. That's not hypnosis. That's uncontrollable laughter mixed with awe. Not like scared awe. Like WTF awe. Really, Mister Gygax, Rest in peace. But... monkey heads?!(NOT the Stranger Things monster!)
Hobgoblin: Larger cousins of the goblins, hobgoblins often enslave their smaller kin. They are better organised, smarter, and vastly more effective.
Melmacian: Alf, also known as Gordon Schumway, crashed on Earth in the 90s. Now you can use him in your Poser scenes! I do not place restrictions on the use of this content. However, Warner Brothers or Lionsgate may have other opinions, so check with them before using it for more than fan art or fair use.
Sathar: Sathar are long, worm-like creatures. Their bodies are internally divided into segments, like an earthworm's. They do not have a skeleton. Instead, they support their bodies hydrostatically, by pumping liquid into the segments and other internal vacuoles, so that they become hard, with muscles pulling against these firmed sacs. A shiny, clear slime coats their skin. Scientists believe they are warm-blooded, but no live specimen has ever been studied. Almost nothing is known about Sathar society. They have tried to kill every alien creature they have met in the Frontier, usually with alarming success. No one knows why the Sathar attack so viciously or what they hope to gain. All attempts to contact the Sathar peacefully have failed. No Sathar has ever been captured alive, because they kill themselves before they can be taken. In one case, an entire Sathar ship self-destructed to avoid being captured. Freeze fields have been applied to several dead Sathar in an attempt to have them revived, but biologists have not been able to find a revival technique that works on them. Scientists have proposed several theories, based on reports from observers. The most widely accepted was written by Gdtlask Gltak, a Vrusk sociologist. Gltak's theory states that all Sathar belong to military units called cadres. The markings on the back of the Sathar's head identify its cadre. Each cadre trains its members as soldiers from the time they are born. Gltak theorises that Sathar attack alien worlds because their military society would fall apart if there was no enemy to fight. (UPF Citizens are warned that this is only a theory, or, if Gltak has sources, they have not been revealed. Until a Sathar is captured alive, their true motivation will not be known.) Includes Star Frontiers laser rifle.
Brass Dragon: Draco Impudentus Gallus, the Brass Dragon. Sandy desert regions are the typical habitat of brass dragons, whose cavernous lairs are often found therein. Brass dragons are quite forward and officious, and they love to converse. They are rather selfish, and tend towards neutrality because of this. This is a stand-alone original figure, and does not require any other dragon figure to use. (Rocky promontory and background not included.)
Klingon (TOS) for the 3D&D Klingon: A TOS-era outfit (including facial hair, head hair, and skin textures) for the 3D&D Klingon.The baldric is part of the top, but can be hidden by transing it out. The geometry underneath is all there.
Ajax Spaceman: A long time ago (the 50s) in a galaxy far, far away (this same one, but the galaxy moves through the universe at 1.3 million miles per hour, so it was some 800 billion miles away in the 50s, though this is a bit misleading because that's only .13 light years. So maybe not that far away in the grand scheme of things...) a kid in Modesto, California named George Lucas was playing with little plastic space-army-men called Ajax Spacemen. These toys, along with Flash Gordon serials and Buck Rogers comics would eventually inspire him to create a complex, high tech science fiction world which Star Trek fans keep wrongly insisting is less "hard" than theirs*, which would ultimately culminate in making everyone go "awww" at a baby little green man. A retro-space zeerust science fiction costume for the 3D&D Klingon. Enjoy!*** despite theirs having, you know, gods and stuff wandering around, rampant cross-alien-species interbreeding (seriously, how would Spock even be alive with half-copper, half-iron based blood? Really didn't think that through did you, Roddenberry?) ** Unless you are that one jerk, of course.
Type III Demon (Glabrezu): Towering to well over nine feet in height, this not-unusual kind of demon has a ghastly appearance, being broad and strong-looking covered with a wrinkled hide, with a head much like a goat-horned dog, pincers instead of normal hands, and a small pair of human arms protruding from its chest. Fully rigged for Poser, this figure can terrify and menace all of your nude Vickies in temples with swords. Enjoy! Updated 2019 June 27 for Superfly materials and textures.
Raxocoricofallapatorian: Two families from the planet of Raxocoricofallapatoria, the Slitheen and the Blathereen, have both tried to take over and exploit the Earth. The former failed more than once because of that most famous of Time Lords known as The Doctor, and the latter because of his former companion Sarah Jane Smith and the neighbourhood kids on Bannerman Road who hang out in her attic.   Includes several expression morphs (jaw is poseable), and two MATs, one for each family (Slitheen is the default), as well as a contraposto pose to get you started and a Slitheen compression field generator (it's worn on the throat like a collar, and enables them to shrink enough to fit inside people's skins). As always, I make no demands on whether you use this commercially, but if it's not fair use you'd better either be or clear it with BBC Wales. Don't forget to donate if you want to keep the aliens rolling! By the way, I DO hope this demonstrates to anyone's satisfaction that I can make all sorts of thumbs and don't need to steal anyone else's frakking thumb. That smeghead starting controversy on Rendo can just bloody well frell off.
Elizabeth 2 Core: Elizabeth 2, Whatever3D's premiere model, is changing the face of the Poserverse. With revolutionary joint parameters, posable facial features, anatomically correct elements and more, E2 is the flagship creation of Whatever3D. Elizabeth 2 includes everything necessary to pose, animate, change materials, and more. Head and Body skin textures are provided separately in free or affordable packages. Clothing, hairstyles, and accessories are available as add-on items for Elizabeth 2 as well. Elizabeth 2 is the one figure you want to make sure you own. And she's free! Includes: Elizabeth 2 Core Figure Elizabeth 2's Swimsuit Elizabeth 2's Hair, African Short Cut Elizabeth 2's Core Textures Materials Include: Light African (default) Dark African (darker African skin-tones) Asian (a darker-toned Asian skin) European ("Caucasian/White", also works for lighter Asian skin tones) Latina ("Hispanic" Latin American tan tone) Tan (lighter skin tone with a tan and tan lines to match the swimsuit Ruddy (darker complected "Caucasian" tone) Pale (light skin tone) Super Pale (paper white skin tone) Goth (pale with dark makeup) Barsoom (bright red skin tone) Barsoom Dark (darker red skin tone) Blue (blue alien skin tone) Drow (ebon black skin tone) Green (alien green skin tone) Mutant (pale green skin tone) Yellow (alien yellow skin tone—or exaggerated jaundice) Elizabeth 2 Base Poses Includes: Against the Wall Alight Arise Arms Raised Bent Over Channelling Contraposto 1 Contraposto 2 Cornered Dance 1 Dance 2 Dance 3 Dive Explorer Fashion Flight Flying Side-kick Karate Stance Kneeling Lying Down 1 Lying Down 2 Melee Pistol Stance Power Walk Run Sitting 1 Sitting 2 Superhero Landing (Note: This is just one of several packages you will need for the full Elizabeth 2 product)
Elizabeth 2 Miniskirt & Minidress: A conforming miniskirt and minidress for Elizabeth 2
Marvin: Another robot, this time it's Marvin from the Hitchhiker's Guide to... oh what's the use. You're just going to make bad fantasy art with it. Probably won't even turn on the bloody shadows. Have a cat clipping right through his leg. It's terrible.
TARDIS Second Console Room: The TARDIS Second Console Room (or is it the first? The Doctor seems to think so). Anyway, the wooden one. No additional furniture included. Just the room, door, scanner, and console. Fully posable.
TARDIS Corridor: 2010-2013 Connector: A simple little connector piece allowing you to hook up 2010 "The Doctor's Wife" style corridors to 2013 "Journey to the Centre of the TARDIS" style corridors smoothly.
Working Continuous Track from Whatever3D Labs: A 17 to 18-year-old experiment I've had sitting in my Runtime. I decided to retexture and release it as a puzzle for people to figure out how it works. Note: unlike most "working tank treads", it isn't done with morphs.  This is a small chassis with three pairs of wheels, with each side's three all connected by a working tank-like continuous track. If you grab the top wheels (the only ones accessible normally unless you hack at things) there's a dial that says "Roll 'em". If you twist that, all the wheels go, and the treads go with. (It's up to you to move it forward the right amount.) It's actually a very simple trick, but not the sort of thing you can make in the setup room. It's a definite CR2 hack.   (This might well make DAZ Stupido literally explode, so I wouldn't try it there. Lots of people seem to be unable to read that my stuff is consistently in a Poser category on a site that also has a DAZ Studio category, then complaining that free things don't work where they were never designed to nor claimed to. So I apparently have to spell that out.)
Hynerian: A Hynerian. Since there are only ever two shown in the show, I did Dominar Rygel XVI because that random female one-off character would have been weird to choose over the main character and crewmember of Moya. This doesn't require anything at all. It's fully stand-alone. Includes the Thronesled, 4 layers of conforming clothing, conforming hair (including chin scruff), a smart-prop commbadge (matches textures with the commbadge element of the Luxan outfit, so you can use these improved textures on that one, too), and a pose marked "Contraposto" but unlike most such poses (but like most Hynerian poses) is a sitting pose. As always, as long as you're not someone I've restricted from using my stuff, I make no restrictions on your use. However, if you are not working for the Jim Henson company or anyone else licensed to use Farscape IP, you should avoid using it commercially without permission unless your use qualifies as fair use under your laws. I have just had to guess as to what a hynerian tongue looks like. I scrolled through two whole seasons and did not once see his tongue. (For all I know, the puppet doesn't have one, but this figure does.)
Terran Federation Trooper: A costume for the 3D&D Klingon, though it can be easily used all by itself since it covers every surface and only allows a dim view of the face through the lenses, so it's sort of stand-alone in a sense. This is the uniform of the stormtrooper-like police shown in the 70s British TV series Blakes 7 (series 1-2). Includes gloves, boots, jumpsuit, and helmet. The blaster is given away separately but is also available free here. (BTW: Call it political if you will, but seriously doesn't anyone find it at least a little bit scary that 40 years ago someone predicted a dystopian future and dressed the police in outfits that aren't actually all that different from what they've come to wear in real life?) As always, I make no restrictions on commercial use. However, if you do not have permission from and are not a representative of or employee of the Terry Nation estate and/or the BBC, any such use must fall under fair use definitions. I mean, I don't personally care. I'm just looking out for you, you know? But if you use this illegally, don't drag me into anything.
Elizabeth 2 Biker Jacket: A highly detailed duplicate of an actual jacket that Dodger owns and often wears, this high-res conforming biker jacket for Elizabeth 2 will blow your mind!
Bone Devil: Bone devils populate the lower planes of Hell, particularly the fifth. They are particularly malicious and delight in making less powerful creatures suffer. As they prefer cold to heat, these monsters also have ultravision, seeing light in the ultra-violet spectrum at 60' range. Bone devils have a great bone hook they employ to snare and wound opponents. Any creature caught (hit) by it has a 50% chance of being stuck fast. The bone devil will then strike such victims with its tail doing 2d4 hit points of damage plus causing a loss of strencth (1d4 points) unless a save versus poison is made; strength loss lasts for 10 melee rounds. This figure package was released originally in August of 2014, and was updated on the first of January, 2015 to include the bone hook weapon. Updated again July 2019 for improved rigging and textures.
Alpha Centaurian: Or maybe it's just "Alpha Centauri". Is it a name? A species? Just an origin? They actually weren't really all that clear. The delegate from Alpha Centauri. I mean, this was the only one shown. We assume there were more but what if not? We don't know. Anyway, all we know for sure is "they" because they don't have an Earth gender. At any rate, this high-pitched friend of the Third Doctor and delegate to the diplomatic missions to Peladon (and eyeball on the other end of a viewscreen on Mars that one time) is here as a Poser alien now. I hereby deny any responsibility for the use of this figure in... *ahem* unsavoury images. But they do have a lot of tentacles. Accepts Klingon Eyeball materials (right eye, specifically). As always, I don't care if you use it commercially, but if it's not fair use, the BBC may. Not my problem. Also, as always now: Not permitted for use by EldrtichCellar.
Future Predator: From ITV's time-hopping 2008 science fiction series Primeval, here come the apex predators of the post-human apocalypse. Only called "Future Predators" by the staff of the Anomaly Research Centre, these echolocation-using, expert stealth, bat-derived killing machines were so scary and deadly that Paramount totally obviously ripped them off them off for the monsters in A Quiet Place. As always, I don't care if you use this commercially, but if you do, you should have permission from the IP owners of Primeval or be protected under fair use. Or, I guess, be as rich as Paramount so you can get away with ripping things off commercially for use in a horror movie. Oh, and also as always now, if you are EldritchCellar you can't use this because I don't like you so I ain't giving you stuff. Jerk.
Carrion Crawler:   Carrion crawlers storngly resemble a cross between a giant green cutworm and a huge cephalopod. They are usually found only in subterranean areas. The carrion crawler is, at its name implies, a scavenger, but this does not preclude aggressive attacks upon living creatores. This is because in a D&D world, seriously, literally everything wants to eat you. Everything. Also note that anything that is considered a bad guy has to be gross. Look, Gygax even has orcs deliberately wearing ugly colours. So of course, you know this guy here must be pretty gross, too. At least it's not a poop-eater (stay tuned for the eventual otyugh, though). This figure comes fully rigged, with displacement, normal, and texture maps. You'll have to supply your own sticky goop for the tentacles. (In fairness, the drawing it's based on didn't show any goop, either.)  
Barbarian Princess for Elizabeth 2: This admittedly impractical costume is that of the woman from the original cover of the 1st Edition Advanced Dungeons & Dragons Dungeon Master's Guide, complete with dagger. (The lady clutched in the efreeti's hand.) The skirt is poseable but can easily be converted to dynamic (as TrekkieGrrrl has demonstrated). Considering the design, it would also make a decent (though perhaps too decent) outfit for Dejah Thoris, Thuvia, or some other Barsoomian lady. Hair not included.
Elizabeth 2 Swimsuit: Elizabeth 2, Whatever3D's premiere model, is changing the face of the Poserverse. With revolutionary joint parameters, posable facial features, anatomically correct elements and more, E2 is the flagship creation of Whatever3D. Elizabeth 2 includes everything necessary to pose, animate, change materials, and more. Head and Body skin textures are provided separately in free or affordable packages. Clothing, hairstyles, and accessories are available as add-on items for Elizabeth 2 as well. Elizabeth 2 is the one figure you want to make sure you own. And she's free! Includes: Elizabeth 2 Core Figure Elizabeth 2's Swimsuit Elizabeth 2's Hair, African Short Cut Elizabeth 2's Core Textures Materials Include: Light African (default) Dark African (darker African skin-tones) Asian (a darker-toned Asian skin) European ("Caucasian/White", also works for lighter Asian skin tones) Latina ("Hispanic" Latin American tan tone) Tan (lighter skin tone with a tan and tan lines to match the swimsuit Ruddy (darker complected "Caucasian" tone) Pale (light skin tone) Super Pale (paper white skin tone) Goth (pale with dark makeup) Barsoom (bright red skin tone) Barsoom Dark (darker red skin tone) Blue (blue alien skin tone) Drow (ebon black skin tone) Green (alien green skin tone) Mutant (pale green skin tone) Yellow (alien yellow skin tone—or exaggerated jaundice) Elizabeth 2 Base Poses Includes: Against the Wall Alight Arise Arms Raised Bent Over Channelling Contraposto 1 Contraposto 2 Cornered Dance 1 Dance 2 Dance 3 Dive Explorer Fashion Flight Flying Side-kick Karate Stance Kneeling Lying Down 1 Lying Down 2 Melee Pistol Stance Power Walk Run Sitting 1 Sitting 2 Superhero Landing (Note: This is just Elizabeth's swimsuit. It's one of several packages you will need for the full Elizabeth 2 product)
Marvin the Martian: Hey, I got carried away doing a bunch of aliens recently, so here's a serious one. Includes the figure with multiple expression morphs, ray gun, helmet, pteruges, and shoes. Does NOT include an Illudium PU-36 Explosive Space Modulator. But I think you can all handle making a red cylinder, a black line, and a spark. Marvin canonically has no mouth. This figure has a mouth, but if you keep it closed you can't see it. I like to provide options. Also, he has a tongue, and if you make it stick out it needs to come out of somewhere. As always, I make no demands regarding whether this figure can be used commercially, but if you don't work for Warner Brothers, they may make demands. Don't forget to hit that donate button if you want to support me doing more!
Human (for the 3D&D Klingon): In almost every science fiction franchise, from Star Trek to Lost in Space to Doctor Who to Battlestar Galactica to Flash Gordon to Buck Rogers to Firefly to Babylon 5 to The Expanse, one sentient species mysteriously keeps showing up: Humans. Nobody knows why this weird creature ends up in all fiction, but unfounded rumour has it that Disney plans to copyright the race as soon as possible. Here's a human for the 3D&D Klingon, complete with some Star Trek outfits. Ten Star Trek outfits, to be precise: A TOS uniform, plus both green "Shatner's Fat Shirt" wraps, the turtleneck from The Cage (can be used for Where No Man Has Gone Before, too, in a pinch, though the Starfleet patch would need black trim added), the Discovery TOS-style top, a Kelvin (2009) Timeline uniform (ST & STID, but not Beyond, sorry but I got tired eventually), both a bridge officer and an admiral's TMP uniform, and the crewman's jumpsuit and bridge officers' uniforms from The Wrath of Khan through The Undiscovered Country. And yes, that IS a posable lapel on that jacket. You're welcome. Oh yeah, and some crappy hair. Texture it better and it should be good, all you need is a necromancer to use on Koz. I am teh suck with hair. I mean, I kinda can do it now, but I'm not *good* at it. But the sculpting part is fine. It's got them pointy spock-burns. If you like this, consider donating to keep me from slowly starving to death in ten years when I've finally used up all my excess adipose tissue. As always, unless you're that guy I don't let use this stuff at all, I make no restrictions on whether you use it commercially or not: that's up to ... whoever owns Star Trek right now. CBS? Paramount? (Hell, it could be Disney by now for all I know. I can't keep track.) But if you don't use it in a fair use way, and you do use it in a commercial way, and you're not the IP owner, you take your own risks for being sued until you turn into a shrivelled parsnip.
Vrusk: Logical and scientific-minded vrusk form one of the four main allied races of the Star Frontiers United Planetary Federation, fighting alongside humans, yazirians, and dralasites to stop the invading forces of the sathar. The insectoid vrusk were revisited in the d20 Modern Future sourcebook in the Star Law campaign ramp, maintaining their intellectual ways. (Just ignore the drawing there.) Updated in April of 2019: Mandibles added, textures improved and shaders made to work better with Superfly, and rigging adjusted to use weight mapping for improved posability. Now also includes the jumpsuit, with high-res detailed textures.
Jaffa: Warrior-slaves of the Go'a'uld, the Jaffa also serve as incubators for young Go'a'uld symbiotes. This is character for the a 3D&D Klingon (available for free here), as well as a full suit of conforming Jaffa armour for the same figure, minus the transforming helmet. Included also is the Jaffa Staff Weapon, now bundled together in this package. To use this set, you will need to get the 3D&D Klingon (link provided above). It's free, though, so it's not like you're out a bunch of money to do this or anything. (Anyone complaining will be ignored and/or ridiculed.)
BSG Colonial Blaster legacy retrofitted prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
Buck Rogers XZ-31 Ray Gun retrofitted legacy prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
Doctor Who Judoon Blaster refit: This is a rerelease of the blaster posable prop that comes with the Judoon figure (also available here). The textures have been slightly improved.
Gamma World Laser Pistol refit: This is a refit and retexture of the Gamma World RPG laser pistol included in my Wasteland Warrior for E2 costume. Textures and materials have been improved.
Gamma World Mark IV-M Blaster Rifle refit: This is a refit and retexture of the Gamma World rifle included in my Wasteland Warrior for E2 costume. Textures and materials have been improved.
RHPS Antimatter Laser retrofitted legacy prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
Stargate Atlantis Traveller Particle Magnum: To go with my retrofits, here, have a new blaster I've never released before! As used by Ronon Dex.
Star Trek TNG Type 2 Phaser (2371 model): To go with my retrofits, here, have a new blaster I've never released before!
Star Wars Bowcaster retrofitted legacy prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
Elizabeth 2 (Hair): Elizabeth 2, Whatever3D's premiere model, is changing the face of the Poserverse. With revolutionary joint parameters, posable facial features, anatomically correct elements and more, E2 is the flagship creation of Whatever3D. Elizabeth 2 includes everything necessary to pose, animate, change materials, and more. Head and Body skin textures are provided separately in free or affordable packages. Clothing, hairstyles, and accessories are available as add-on items for Elizabeth 2 as well. Elizabeth 2 is the one figure you want to make sure you own. And she's free! Includes: Elizabeth 2 Core Figure Elizabeth 2's Swimsuit Elizabeth 2's Hair, African Short Cut Elizabeth 2's Core Textures Materials Include: Light African (default) Dark African (darker African skin-tones) Asian (a darker-toned Asian skin) European ("Caucasian/White", also works for lighter Asian skin tones) Latina ("Hispanic" Latin American tan tone) Tan (lighter skin tone with a tan and tan lines to match the swimsuit Ruddy (darker complected "Caucasian" tone) Pale (light skin tone) Super Pale (paper white skin tone) Goth (pale with dark makeup) Barsoom (bright red skin tone) Barsoom Dark (darker red skin tone) Blue (blue alien skin tone) Drow (ebon black skin tone) Green (alien green skin tone) Mutant (pale green skin tone) Yellow (alien yellow skin tone—or exaggerated jaundice) Elizabeth 2 Base Poses Includes: Against the Wall Alight Arise Arms Raised Bent Over Channelling Contraposto 1 Contraposto 2 Cornered Dance 1 Dance 2 Dance 3 Dive Explorer Fashion Flight Flying Side-kick Karate Stance Kneeling Lying Down 1 Lying Down 2 Melee Pistol Stance Power Walk Run Sitting 1 Sitting 2 Superhero Landing (Note: This is Elizabeth's default hair, just one of several packages you will need for the full Elizabeth 2 product)
Elizabeth 2 Casuals: A set including a conforming casual shirt and slacks for Elizabeth 2.
Laurana for Elizabeth 2: Dragonlance's Golden General, Laurana, princess of the Qualinesti elves and former betrothed of Tanis Half-Elven, hero of Krynn.
Aboleth: The aboleth is an amphibious creature that dwells in underground lakes and caverns. Intelligent, it hates most land-going life and seeks methods to enslave or destroy the beings of the surface world. The race is extremely long-lived and has collected a great deal of knowledge more ancient than man. It is perhaps better that men do not know these ancient secrets, for these are rumoured to be more horrible and foul than could be thought possible. The aboleth figure is fully rigged and textured for use in Poser 2014 and any other versions with weight mapping capabilities. Texture, bumpmap and specularity maps are included for maximum tentacly sliminess. As always, we'd love to see what you do with these. Unless it's on Renderotica, that is. Please leave alternative uses of these tentacles to our imaginations. Updated July 2019 for improved textures and rigging.
Abyormenite: "Hot season" Abyormenites share the planet of Abyormen with a humanoid species, though not at the same time. These two distinct sentient species trade off, as the planet revolves around a binary star system which brings it closer to the blue giant of the pair part of the time, and further out, around the red dwarf of the pair for the cold season. Both species coexist and honour the artefacts and structures of the opposite species. When the season changes, all of the dominant species dies off, leaving reproductive spores which will activate when the seasons shift again (though a few "teachers" that remain underground during the opposite season to communicate with the other race.From Cycle of Fire by Hal Clement. Updated May 2019 for Superfly.
Aarakocra: Bird men.
Klingon: Qapla'! Here's a ready-to-go klingon warrior ready to invade your runtime! Note, this is not a character or morph for any figure. This is a completely free original, stand-alone, fully-textured figure for use with Poser 9 and up complete with clothing, weapons, and really shoddy hair (because I suck at hair). Includes expression and phoneme morphs, some face-shaping morphs, and head morphs to change the shape to TOS, TMP, Abramsverse and Discovery klingons, as well as romulan, kazon, and the krill from The Orville!
Axe Beak: Similar to phororacoses, or terror birds, axe beaks are prehistoric carnivorous flightless birds. They are very fast runners and aggressively hunt during daylight. An axe beak resembles an ostrich in its lower portions, with a strong neck and a heavy, sharp beak.
Aliens M41A Pulse Rifle retrofitted legacy prop: This is a rerelease of a model I made in 2002 or 2003, retextured. The mesh is the same as it was back then, and the UVMapping isn't great, but it still works, and the materials and much higher quality new maps are built for Superfly.
Cylon Centurion (1978): The Cylons were created by man... wait. Scratch that. The Cylons were created by some alien reptilian race, so I think David Icke may have been involved somehow. They evolved... no, wait. Again, I guess they really didn't. They pretty much stayed like this. But there were some gold ones. They rebelled... nope, again. The lizard race died off and only the centurions were left. And they have a plan. Well... I guess. If that plan just involves trying to kill off all the humans for admittedly very little explainable reason. It's not even like daleks or something where they're xenophobic and racist. They aren't the humans' cybernetic offspring, not back in the 1978 version on which this is based. Nope. They're just shiny bad guys that George Lucas tried to sue for looking too much like Stormtroopers (but he lost). This package features a fully posable 1978 original-style cylon centurion figure suitable for use with Poser 4 and up, though the shiny chrome will look best in Poser versions with the Firefly renderer. It probably works in DAZ Studio, too, but I haven't tested it there because I think that DAZ is a rather douchebaggy company and refuse to support them, so I don't honestly care. But best of luck if you do! Odds are it's fine. Updated June 2019 to texture and use Superfly-compatible shaders.
Dalek (2005): These xenophobic totalitarian pepperpots were thought up by Terry Nation in 1963, and this 2005 version hasn't changed very much since. Armed with a plunger and an egg beater, and apparently (but not actually) challenged by stairs, they defy all these appearances and kill the living crap out of you. Don't screw with a dalek. Unless, of course, you're The Doctor. Then you'll send them running scared. Updated 2019 for Superfly materials and fully textured.
Hiver: Starfish alien from Traveller. Updated for Poser 11, including improved, weight-mapped rigging and improved textures.
Judoon: O Fro Jo Do Fo gyo Fo Po zo! (Includes Judoon figure, blaster, translator and scanner. Clothing is part of the figure.)(Note: This is one of a very few figures I've done with the clothing built-in. The Judoon have never been shown in another outfit anyway, and I didn't want to make a naked rhino guy body to go underneath.)
K-9: Affirmative! It's everyone's favourite tin dog and loyal robot companion to the Fourth Doctor, K-9! As posable as he can be, considering he has no limbs. (Probably slightly more posable than the actual prop.)
Blue Slaad: Though the blue variety is stronger than the red, the blue slaad is still a relatively weak member of the slaad race, more often used to run errands and carry out missions for the masters than for wait. WTF is a master. CHAOTIC NEUTRAL DUDE F%$@ YOUR RULES! AYAYAYAYAAYAAAA! Ribbit, ribbit. Ahem. Sorry there. Chaotic neutral happens. Hail Eris. ANywAY, the blUe SLaAd is actually the base SlaaD and includes the blue variety M0rph. The other morphs and textures will be comin6 l@+3r. CHAOTIC NEUUUUUTRAL! LIMBO WIF ME!!! Dammit, slaad. Updated 27 June 2019.
Ice Devil:   The frigid eighth plane of Hell is populated in the main with ice devils. They are greater devil in every sense of the word, preferring to attack and torment victims by means of their claws, mandibles, and sexy sexy spiky tails. A few (1 on 1d4, and this one) carry great spears which inflict 2d6 hit points of damage, and will numb with cold. Fans of the late Wesley Willis will almost certainly recognise this mode of attack as being nearly identical to that of the dreaded Chicken Cow. To quote Mr. Willis, "It can break a glass. It can also stab you inna ass... This beast attacked my brother when he was inna cold. His hands were frostbitten. His hands were also numb... Rock over London, Rock On, Chicago. Blockbuster Video, wow, what a difference!" So beware. Hella beware. Be. Ware. Updated July 2019 for massive rigging and texture/material improvements. Includes spear and icy stalactites scenery prop.  
Winterdress: Winterdress is a Texture of MFD for V3 for the cold season.
Raffkleid: Eveningtexture of MFD for Victoria 3
Ice Cream: Ice Cream with exterior and interior as well as all necessary accessories for sale
Passionate, 5 facial expressions for V4: ********************* *PASSIONATE freebie by LoryLane and Tempesta3d* ********************* LIVE THE LIFE WITH PASSION!!!!!! Show the emotions in your heart, with these five free real facial expressions for Victoria 4! Passionate Freebie by LoryLane, March 2008 Note: With future versions of V4 can get an error message, just click ok and the facial expression should work fine. **************************************************************************************************************************** System Requirements: PC, tested on a Windows XP, used in Poser 7 All of the content in this package was created by LoryLane ------ Required to Use this Package: Poser 7, V4, morphs ------
Sample HDR: A sample HDR file made by me in Terragen and HDR Shop.
Chris's Replacement Cr2's: These are replacement updated cr2's for my ww2 pacific props sets... they will fix some of the known issues with my prop sets including the problems with the suface colors... PLEASE SEE README FOR DETAILS AND INSTALLATION!!!
chris's aircraft props scene stage: This new file contains a stage/scene backdrop with textures that give the look and feel of a ww2 pacific island airfeild. Complete with a jungle/sky backing and "ground" textured to look like a crushed coral and metal slathing runway, this scene works to bring true life to your aircraft. Now with this and my other aircraft prop sets you can create a real-to-life working airbase straight out of the heart of the war! Included are the obj's, cr2 and textures for this scene.... Enjoy!!!!
USS Wilkes DD-67 *Fixed* version: With a great deal of help from BeyondVR some issues with flipped normals and some other issues with this model were fixed to improve the over-all quality... you can either install this full download which will replace the earlier version... or simply copy and replace the obj. file from the origional download with the one found here-in...
Chris's WW2 D-Day Props Set: I decided to work further in the WW2 era before returning to my WW1 warships series. In my latest works I give you my WW2 Village scene and props set. With this set you can load the pre-created full village scene... or optionally I've included 2 ruined buildings, a scene ground base with cobbled streets, hedges and rocks. Also i've included an extra ground base prop to re-create the hedgerows of Normandy! I've attempted to create a ruined village that looks bombed out and fought over, for use with my M4a1/W or any other WW2 vehicles you may have(this set has been scaled roughly to V4/ Michael and to my tank)! Also coming soon are my M5a1 Stuart light tank, and an SdKfz 250 German halftrack.... watch for them in my portfolio at sharecg... Enjoy and happy rendering!
Harbour Lightship, Floating Lighthouse: As an add-on for my ww1 ships, I converted my Monitor to a Lightship. Ships like this were very common sights in harbours and anchorages world wide, specially in the early years of the 20th century. Built on aging ship hulls that had been stripped and refitted, these ships had their main masts replaced with a Lighthouse-like structure and were most commonly towed to a permanent mooring point, though some were able to sail under their own power.
Chris's M4 Sherman Mk1 Firefly: Merry christmas all! Here's my latest... the Sherman Firefly! When the British and Canadian armoured units discovered that the origional gun on the Sherman tank was under-powered and out of date, they began experiments to improve the tanks main armament, eventually fitting a 17pounder anti-tank gun to a new turret on the Sherman hull. This model is painted in the colours and markings of the Canadian Grenadiers 22nd Armoured Regiment, 4th Canadian Armoured division as she appeared going onto the beaches at Normandy During the D-day invasion of occupied France.
Chris's M3 Lee/Grant Medium Tank: The M3 Lee, known as the "Grant" to the British in it's modified form saw duty with the British in North-Africa through the lend/lease program, and later with Russian forces as well as American, this tank spawned almost countless variants and modifications, including engineering and bridging vehicals, mine clearance types, and even an armoured recovery vehicle. Standard armaments on early versions were set as 1x 75mm gun, 1x 38mm gun, and 2x .50cal. machineguns, but in combat the origional 75mm gun was found to be under-powered against german armour and poorly placed, limiting it's angles of elevation and traverse. Also it's high profile (due to the machinegun cupola over the turret) made it an easy to spot target for sharp eyed german gunners! The version i have depicted here is an early version M3 Lee type with riveted/welded hull and cast turret. My details may not be completely accurate but i've tried as best i could to present a reasonably correct historical reproduction of the M3 as she appeared during her WW2 years.... Enjoy and happy Rendering! Included: Obj's for M3 Lee, fit-to cr2's for my M4 sandbags, radial engine and trackskirts (included as part of my origional M4a1 Sherman download), Cr2's for all of these items, and US Olive Drab textures for all plus alternate textures for the British North-Africa campaign against Romel and mat poses to load these alternate textures to the tank and trackskirts! Features: The model is detailed inside and out, and features drivers hatches that open and close, vehical commanders hatches the open and close, engine hatches that also open, and the turret and weapons mounts can be trained and elevated! This set also includes a set of Cr2's which add the proper radial engine, trackskirts, and cargo (you will need my M4a1 Sherman for these to work)! I've also included mat poses to allow you to change the paint scheme from US Olive drab, to British Desert pattern from the North-African campaign. This model is also compatable with the trackblur prop included with my M4a1 Sherman! (i haven't figured out how to model poseable tracks yet... lol).
Chris's D-Day Village extras: I decided to work further in the WW2 era before returning to my WW1 warships series. In my latest works I give you my WW2 Village scene and props set. With this set I've included a set of “Czech Hedgehog” tank traps, a sandbag emplacement, and a rubble pile to use with my WW2 village set. This set will give that extra bit of “life” to my village scene, for use with my M4a1/W or any other WW2 vehicles you may have! Also coming soon are my M5a1 Stuart light tank, and an SdKfz 250 German halftrack.... watch for them in my portfolio at sharecg... Enjoy and happy rendering!
Chris's M60A2 Patton "Starship": My newest release is a Vietnam era tank to go along with my Huey Cobra... The M60 MBT was the next generation of the older and smaller "Patton" series of tanks. Though not officially named the Patton, it was based on the older M48 Patton design... with improved weapons, armour, and a larger powerplant, and from a distance the two could easily be confused so similar are their basic outlines. The M60A2 was to have been a giant leap in modern armour in it's day, it's main weapon was the Shillelagh A/T system, a 152mm, short muzzle cannon that could fire conventional munitions, or the 152mm Shillelagh anti-tank guided missle. It was to have featured the latest in technologies (some of the first next-gen devices ever employed in a tank), IR designators for it's missle system and a whole host of extra features making it the most technologically advanced tank of it's time. Many of the systems that were first tested in this tank were eventually fitted to modern tanks such as the M-1 Abrams as standardised equipment. Sadly the M60A2 suffered from many severe problems... powder residue from the standard shells would remain hot in the barrel and could cause succeeding rounds to fire prematurely (requirig a special compressed air clearing system to solve), the electronics were un-reliable, and the range of the main armament (though good on the proving ground) was found to be below that of smaller calibre guns then in use. The M60A2 saw some limited battle use at the end of the Vietnam war, but due to the many issues with it's equipment was pulled from service in the early 80's with most examples being converted to the M60A3 variant which still remains in use! The Shillelagh A/T missle system that was used in this tank was more successfully installed and used in the Sheridan light tank but has not to my knowledge been used since.The host of then new technologies lead to this tank gaining the nickname "Starship" from its crews, but sadly it's new tech did not make up for its many deficiencies...
Chris's WW2 pacific props (set2 part 2): the third installment in my WW2 aircraft props, these props are designed to go along with my previous set of buildings for a ww2 airfeild. With new crates, oil drums, a re-fueling tank and other small extras, these props will go a long way to adding that extra bit of life to any airfeild! Enjoy!!
Chris's BeyondVR Repaints: This is a set of replacement textures for BeyondVR's aircraft. I've done these to bring a little more "life" to his wonderfull models. All are high detail, highres textures that will REPLACE THOSE ALREADY WITH HIS MODELS (when copied to the textures folder for BeyondVR's planes they will overwrite the files he included)... PLEASE SEE THE INCLUDED README INCLUDED WITH THE DOWNLOAD PACKAGE!... I hope you enjoy them!
Chris's Universal Brengun Carrier Mk2c: Here she is... a work horse of WW2... the Universal Carrier (also known as the Brengun Carrier) was used by just about every Allied nation of WW2 and even used in rare cases by the Germans after being captured. The Bren Carrier was a lightly armoured, open hulled track used mainly to haul supplies and infantry to and from battle areas.... but it also under went it's share of experimental and field modifications. Known as the "Wasp" it carried a flame-thrower. It also carried at various points a 3in mortar, 2 pounder A/T gun, Vickers MG, and from the Germans (on captured versions) a 37mm Pak gun and a triple Panzerschreck A/T rocket mount! In my model, the Bren Carrier is armed with a Vickers .303Mg and the Brengun has been removed which was a fairly common field modification. On top of its standard uses as an MG and infantry carrier, the Universal Bren Carrier was also used as a Gun-tractor and ammunition carrier for artillery units all across the Allied armies. Variants were produced in Canada, The United States, Australia, New Zealand, and even China... with the origional design being British. After the war, the Bren Carrier also saw production by the Swiss and in the Netherlands as well, and was so successful that it stayed in use through to the 1960's! Included: Obj's for Brengun carrier, cargo, sandbags, tools, an engine, and trackblur prop. Cr2's for all of these items, and US Olive Drab textures for all plus alternate textures for the British North-Africa campaign against Romel, and Canadian regiments in Europe with mat poses to load these alternate textures! Features: The model is detailed inside and out, and features an engine hatch that opens, and the turret and weapons mounts can be trained and elevated! This set also includes a set of comforming props which add the proper engine, tools and cargo! I've also included mat poses to allow you to change the paint scheme from US Olive drab, to British Desert pattern from the North-African campaign and also a Canadian scheme, plus a conforming track-blur prop that parents to the tracks of the vehicle to give it a sense of motion (i haven't figured out how to model poseable tracks yet... lol).
Chris's Sd.Kfz 250/4 german Half-track: The SdKfz 250/4 was one of the most common vehicles in the German army. It saw many uses and under went a whole series of modifications allowing it to be anything fromm a command vehicle to a self-propelled gun mount, and even an anti-aircraft platform! On the downside, weak armour meant that the half-track was easy prey for infantry and armour, and it's basic shape from above earned it the nick-name the "Iron Coffin". My details may not be completely accurate but i've tried as best i could to present a reasonably correct historical reproduction of the SdKfz 250 as she appeared during her WW2 years.... Enjoy and happy Rendering!
Chris's M4a1 Sherman Add-ons Pack1: This set provides 3 new conforming figure props for my M4a1/W Sherman, a "Dozer" engineering add-on, a Minesweeper add-on, and a conversion kit for the Sherman DD (Duplex-Drive) All three are fully poseable and automatically conform to my M4a1. The "Dozer" can be lifted up and down. The Minesweeper Kit features a frame that can be posed to follow the terrain and rollers that can be rotated, and the Sherman DD kit features a custom morph to raise and lower the floatation skirt !
Chris's ww2 pacific props: this is a set of props designed to work with bazze's F4u corsair plus some extras i created and am sharing with the 3d community, included are some special effects props (such as flak bursts and smoke effects) and some weapons and extras for bazze's corsair which can be downloaded from http://www.colacola.se/map_1.htm
Chris's WW2 pacific props (set 2): this set of props follows my last with a few more props for your warbirds... simulating a stereo-typical naval airfeild in tha pacific during WW2, this prop set contains a control tower, aircraft revetments, hangars and other typical airfeild structures. Everything is scaled to life size for victoria/michael and all cr2's, obj's and textures are included... enjoy!!
USS Amphitrite, WW1 Coastal Defense Monitor: One of the more unique parts of pre-war history was the ressurection of the Civil War Monitor. Low to the water, and slow, but armed with guns taken from old Battleships, these "New Navy Monitors" looked almost like miniature versions of the newer battlewagons in the fleet! Here i have reproduced a Monitor of the Amphitrite Class as she appeared during WW1, she is fully poseable and ready for service! (see included readme for details!)
USS Conneticut BB-18, Pre-Dreadnaught Battleship: This is the 5th in my ongoing series of WW1 warships. The Uss Conneticut BB-18 was the first of this class to be constructed as a new heavy class battleship for the US Navy (her sister the Uss Minnesota was 5th in the class). The Conneticut gained fame as the over-all Flagship of the "Great White Fleet", in which all her sisters sailed, as well as Fleet Flagship during various expositions and Presidential parades. This model also comes with 3 mat poses, representing major colour schemes in service during her carreer (see readme for details!)
Steam Motor Launch: This is the fourth in my series of ww1 ships and boats. The steam launch was a standard run-about for navies around the world, to ferry dignitaries, shore parties and supplies from ship to shore! Included is a set of 3 mat poses to change the flag on her bow to match the ship or country of your choice! See included readme for details!
SMS Emden WW1 German Scout Cruiser: This is my first in a planned series of WW1 warships and was a rebuild of an incomplete model found on artist3d (Please see the included readme for details!), I added details, redid the textures and material zones and added numerous extra details to fill out the model. It is fully poseable with some 14 gun turrets that can be trained and elevated for recreating anything from peacefull sailing to any battle condition you wish to reproduce!
Kite Observation Balloon: This is my second WW1 model and is intended to be parented to my WW1 warship models (must be parented manually, see included readme). Kite Balloons were used by armies and navies the world over during the great war and i have tried to reproduce one as accurately as possible for use with my ships... Enjoy!!!!
USS Minnesota BB-22: This is the third in a series of faithfully (to the best of my current abilities) reproduced WW1 warships. The USS Minnesota was an American Pre-Dreadnaught Battleship that served her country with distinction both before and during the Great War. Her greatest claim to fame was serving as a squadron Flagship during the world cruise of the "Great White Fleet" along with her sisters of the Connneticut Class. She also served as Flagship of the US Navy Atlantic Reserve Fleet. Here she is, reproduced in all her glory with fully poseable guns that can be trained and elevated for realistic posing for both peacefull sailing and any battle time condition you should wish to reproduce. I will not say that my details are totally accurate... but i have tried to the best of my ability to produce a realistic and reasonable model of the USS Minnesota as she appeared during the war. I shall be releasing further WW1 ship models in the near future... Look for my Kite Observation Balloon, and my model of the SMS Emden, a renowned German Scout Cruiser made famous during the war. This (as with future planned models) is a high poly, high res model and i hope that all my downloads will be well recieved in the modelling world!
USS Minnesota, Pre-Dreadnaught Battleship: The 3rd installment to my WW1 warship series, The USS Minnesota gained fame as a squadron flagship with the "Great White Fleet", Here she is reproduced in as much detail as i am able and is fully poseable including all her 24 guns and her rudders. This installment also includes 3 Mat pose files allowing users to pick one of three colour schemes used during the Minnesota's carreer!... See included readme for details!
WW2 Dummy Pilot for WW2 era Aircraft: This is a non-poseable dummy pilot figure representing a typical ww2 pilot for your historical renders... it's also designed to be fully conforming to my aircraft products from my store at www.schells.ca
AH-1 Huey Cobra Gunship: A step away from my WW1 Era works and into the modern age, i bring you the Vietnam Era Huey Cobra. Made famous as the "Snake", the Cobra served through-out the later parts of the Vietnam War and has continued in service in various modified forms through to this very day! This model is fully poseable and includes extras such as 2 dummy pilots, a conforming cockpit, and conforming prop-blur figures (See readme for details!)
Chris's M5a1 Stuart Light Tank: I would like to thank Roman Antalek for his M5a1 Stuart model in lightwave format, which was found free for unrestricted use here on sharecg (at http://www.sharecg.com/v/30266/3D-Model/M5A1-STUART-VI). SEE README FOR DETAILS! I reworked this model and fixed some parts that didn't load properly, replacing a few parts as needed, including the pintle-mounted .30cal machinegun with my own .50cal browning created for my Sherman, the 35mm cannon and mounting in the turret, and part of the hull (it wouldn’t load properly due to a corrupted file save in the download). I also refitted my Sherman track skirts to fit this excellent model and created the track blur effect prop to fit his tracks, as well as refitting my Sherman cargo prop! The Cr2's and texture maps were done by me to replace the textures that came with this model and to make it poseable and useable in Poser/Daz Studio. You may contact me at black_knights_templar@hotmail.com for any questions, comments or concerns, or if you wish permission for use of my models), enjoy and happy rendering!!!
USS Virginia BB-13: After a brief hiatus from 3d modeling i am proud to bring you the 8th installment in my on-going series of WW1 ships! The USS Virginia was Battleship #13 (BB-13) for the U.S. Navy and launched early in the 1900's during the frenzy of construction leading up to WW1. She took part in operations off the Cuban coast, and in various celebrations and tours before joining with her sisters in the "Great White Fleet". See Readme for details and usage.
Chris's M113a1 APC: Synonimous with the Vietnam War is the M113 APC, known as a "Track" to her crews. The story of the M113 actually begins much earlier, towards the end of WW2 and after when the U.S. Army began reasearch and developement into the use of dedicated armoured troop carriers. In 1952 the Army purchased the M75 APC (similar in over-all appearance to the M113), but it was too heavy and slow... so it was replaced during the Korean conflict by the M54 which served valiantly during that war. In the late 50's a new requirement was laid out for an APC that could be air-transported and amphibious. Many designs were tested and the M113 (from the same manufacturer as the earlier two tracks) was finnally selected. It's new aluminum armour made it extremely light weight, allowing it to meet the requirements that the U.S. Army had laid out, and in 1960 it was officially adopted into the Army's inventory. During its lengthy service in Vietnam, its light wieght was discovered to be a great weakness as its armour was too thin to offer much protection from anything other than small arms fire, however, through trial and error this defficinecy was over come in the feild. Many crews layered the interior and roof with sandbags to offer some extra protection... and eventually special kits were designed to help improve its capabilities. The M113 underwent many modifications and saw many versions produced. Serving actively in over 40 countries around the world (including the U.S.), it remains in service to this day! With this model i've depicted the basic M113a1, and have included a modification kit to convert it to the ACav (Armoured Cavalry Vehicle) variant common to the later parts of the war in Vietnam. Enjoy!
Chris's M4a1/W Sherman: Stepping away from my ships models for November 11th, I bring you my latest work... The M4a1/W Sherman, iconic tank of WW2. Serving through out WW2 and beyond, the Sherman was one of the most widely produced tanks of the era. Seeing duty with the British in North-Africa thgouh the lend/lease program, and later with Russian forces as well as American, this tank spawned almost countless variants and modifications, including engineering and bridging vehicals, mine clearance types, and even amphibious variations! Standard armaments on early versions were set as 1x 75mm gun, 2 x .30cal. machineguns, and 1x .50cal. machinegun, but in combat the origional 75mm gun was found to be under-powered against german armour and so the Sherman went through several modifications to improve her main weapon, eventually recieving a high-velocity 76mm gun, and from the British, a 17 pounder anti-tank gun, amongst other improvements. The version i have depicted here is an early version M4a1/W which had a cast upperhull and turret, but a combination welded/riveted lower chasis. My details may not be completely accurate but i've tried as best i could to present a reasonably correct historical reproduction of the M4 as she appeared during her WW2 years.... (Please see included Readme for details!) Enjoy and happy Rendering! As a side note... since this release corresponds with Rememberance day, November 11th as an extra feature i've included a 3d model rememberance poppy, in honour of all our fallen heroes, both past and future... my thanx to all of them for their sacrifices and my heart out to those who's family members gave the ultimate price for our futures.
Conforming Flight Helmet for M4/V4 and Dummy Pilot: A new set of items consisting of a Conforming Flight Helmet for Michael/Victoria, and Two Dummy Fighter Pilot figures designed for use with jet-age aircraft and also to conform to new Models coming out soon on my site
GunHed Unit 507 Tansforming Mecha: Fan Freebie from Schell's Armour Works (www.schells.ca) Fully functional with Full, 3-stage ERC tranformation!   Original Gunhed Manga Concept by Kia Asamiya, Film GunHed designed by Shoji Kawamori. Film Produced by Toho Films, Directed by Masato Harada (Alan Smithee in the U.S release). 
VT-1 Supercat Weapons Set #2 for DAZ and Poser: This second set of weapons for the Supercat adds Phoenix Missiles, Sparrow Missiles, and a mixture of these and other weapons to expand the load-outs of the VT-1. All items in this set include numerous ERC Dials for ease of use! *NOTE* You will need my VT-1 Supercat for DAZ and Poser for this set to work!
EA-12B Sky-Eye for DAZ and Poser: The EA-12 Sky-Eye came into UN service at the same time as the VT-1 Supercat, and is designed to fill several roles once held by a variety of other older aircraft. Its base design is that of a Naval Bomber/Strike aircraft, but it can also be equipped to fulfill the Fleet AWACS role, and also the ELINT and Refueling Tanker roles as well. By the time of the Global Civil War, the EA-12 would be found serving along side the VT-1 and the more advanced VGF-14 Variable Geometry Fighter in the UN Fleet. This pack includes 3 versions of the EA-12B Sky-Eye (Bomber, AWACS, and ELINT/Tanker), a base weapons load-out for the bomber version, and numerous extras including dummy pilots for the cockpit. It also includes a large number of ERC Dials and Pose Presets for ease of use!
SMF-45 Vampyr for DAZ and Poser: In response to the UN's VGF-14 Wildcat, the Anti-UN Nations supported by remnants of the Soviet Union announced the development of their own Variable Geometry Fighter. Based on stolen blueprints and jointly constructed by SAAB, MiG, and Sukhoi the SMF-45 is a state-of-the-art combat aircraft, how-ever several flaws were revealed during early flight tests. The Vampyr is heavier than the UN's Wildcat, and the more complex transformation system used makes it slower to switch to its alternate combat modes than its counter-part. Due to heavier weight, the SMF-45 has shorter range that the Un aircraft, and owing to the method of transformation it tends to suffer from pitch-up stalls during mode switches in flight that can be fatal to an unsuspecting pilot. Despite these issues, the Vampyr was rushed into production and the first of the type entered service only a short year after the UN began deployment of its VGF aircraft, and would continue to serve on the front lines through-out the Global Civil War! Features include fully functional cockpit controls and flight surfaces, numerous ERC Dials for ease of use including 3 stage real-time transformation, a multitude of pose presets for still rendering, ERC controlled pose-able weapons, and even detailed Dummy Pilots to place in the cockpit!
AUNS Khrushchev Aviation Cruiser For Daz and Poser: Unlike the UN, who could dedicate heavily into new warship design and construction, the Anti-UN forces had neither the technology or finances to embark on large new builds so instead they began various refits of older ex-Soviet vessels. The Kiev Class of Aviation Cruisers were the most readily available, so they were updated to incorporate nuclear power-plants, NATO-style angle flight-decks, and aircraft catapults to launch heavier aircraft such as the SMF-45 Vampyr just entering Soviet Service. Through-out the Global Civil War, these aging vessels would soldier on and would be amalgamated into the UN National Guards fleets at wars end. Features include: Detailed hangar and bridge spaces, functional weapons mounts, working aircraft elevators and munitions lift, deck and hangar cranes, working hangar bay doors, radar masts, blast deflectors and aircraft catapults, rudders, propellors, and even launch-able motor boats! There are also numerous ERC dials for ease of use, a low-poly dummy deck crew, anchors and chains, and even a pair of low-poly helicopters for the flight-deck!
EA-12 Sky-Eye Macross Fan Textures Set: Includes 2 alternate Macross Fan Textures for my EA-12B Sky-Eye aircraft with Pz2 Mat Poses for ease of use... for FAN USE ONLY, NOT FOR COMMERCIAL PURPOSES!
TL-122-D Crook-Neck Flashlight: During World War II, a request was made for a type of flashlight to be developed for use by soldiers being deployed overseas. The TL-122 series of angle-head flashlights were developed by multiple manufacturers, most notably Bright Star, and issued as part of the basic Paratrooper and Army Rangers web kit. It was used widely throughout the war, and was adopted for use by numerous allied countries. The TL-122 Flashlight would eventually evolve in to the MX-991 series of lights issued to US forces in Vietnam. It would go on to be adopted by the armed services of most NATO nations, and can be found in many other places world-wide both in civilian and military roles. This model comes in 2 versions, the first is fully rigged with a working On/Off switch. The second version is a simple prop version (no moving parts) that is set up to smart-parent to Panko`s VPM1 Paratrooper Figure (or can be manually parented to the Combat Pack prop). It includes separate Lens and Bulb materials for the light-bulb inside, so that you can easily change lens colors or set the bulb as a light emitter if you so choose. Also included are poses to position the light to either the right or left hand as needed.
PRC-25 Radio Pack: The PRC-25 Back-Pack portable radio was a mainstay of military communications during the Vietnam Conflict, replacing the earlier PRC-10 in service by 1965.It boasted a range of between 5 and 8 "clicks" (kilometres), depending on which antenna was fitted. Most commonly a 4 foot flat "tape" antenna was fitted and gave an effective range of 5-6 km, but the heavy terrain and dense foliage in Vietnam reduced this range severely at times. Longer antennas, and the use of high ground terrain could double this range and at times broadcasts could reach 15 or 20 miles on a good day with the right conditions. Later models of the PRC-25 and its successors could be fitted with extension sets for cryptography and scrambled "secure" transmissions, and most variants could be fitted with auxiliary items such as external speakers. The RTO (Radio Telephone Operator) in an infantry unit would be assigned to carry the radio pack, batteries, and accessories, which weighed between 20 and 26 pounds, along with his other combat equipment. It was the RTO that typically assisted with navigation, as well as providing a communications link between his unit and neighbouring forces to co-ordinate attacks and call for support from other allied units. The PRC-25 would serve through-out the Vietnam War, and would remain in service for over 30 years, seeing numerous improved "upgrades" through its service lifetime. It has been mostly replaced in front-line use by more modern systems, but can still be found in service in training battalions, and with Reserve and National Guards units. Included in this set are; the PRC-25 Radio Pack with pose-able handset and strap adjustment morphs, Pose Presets for the Handset, and some basic Action Poses to use in your scene renders. The Radio Pack also includes detailed textures and bump maps. This set is designed to be compatible with Panko`s Vietnam GI Gear and equipment, and his smart-parenting prop sets.
VGF-14 LEO Booster System for DAZ and Poser: Developed to expand the capabilities of the Wildcat, the LEO (Low Earth Orbit) Booster system adds large Thruster Pods to the back of the fighter, along with numerous additional Maneuvering Thrusters and added Conformal Fuel/Armour Tanks to allow for combat operations in orbit. The large main thruster pods also contain a set of additional missiles to enhance the space combat load of the base Wildcat aircraft! These add-on parts include various ERC dials for ease of use and load smart-parented to the VGF-14 and will add a fun extra level of detail to your combat renders! *NOTE* You will need my VGF-14 Wildcat for DAZ and Poser for this set to work!
VGF-14 ETO Booster Set for DAZ and Poser: Early in the development of the Wildcat, the UN Military requested that Earth Avionics investigate possible methods of orbital deployment for their latest fighter, this investigation led to the creation of the disposable Earth-To-Orbit (ETO) Orbital Launch Vehicle. This system adds a single use set of rocket lift motors and some additional armaments to allow the VGF-14 to reach orbital escape velocity in an emergency and can launch the aircraft from any prepared or mobile launch facility anywhere on Earth. The UN Fleet has also used the ETO Booster to extend the range of the Wildcat for deep-space recon operations with units operating from the Lunar or Mars Fleet Bases. *NOTE* You will need my VGF-14 Wildcat for DAZ and Poser for this set to work!
VGF-14 Dual Trainer Cockpit for DAZ and Poser: Early in the development of the VGF-14 it was realized that a Trainer variant would be needed. Rather than make a specific separate Trainer variant, the nose section of the VGF-14 was made modular so that the standard single crew cockpit could be replaced with a dual seat version for use as a trainer. This set includes the Dual Seat Nose Pod, poses to prep the VGF-14 to have it added, and ERC dials for ease of use... The new nose-pod is fully conforming to the original VGF-14! *NOTE* You will need my VGF-14 Wildcat for DAZ and Poser for this item to function!
VGF-14 Wildcat Value Bundle Pack: Grab this pack and get the Wildcat and all its add-on sets for 20$ less that total individual item costs! Included in the bundle are: the base VGF-14 Wildcat, LEO Boosters, ETO Booster, Dual Cockpit, Weapons Sets #1 and #2, Reactive Armour, and the VGF-X add-on packages... All for one amazing price!
VGF-14 Weapons Set #2 for DAZ and Poser: Along with newer weapons systems in the UN inventory, the Wildcat can mount most older standard NATO weapons systems as well. This set adds an assortment of modern weapons to the VGF-14 such as the Sparrow and Sidewinder, and all items include ERC Controls for ease of use! *NOTE* You will need my VGF-14 Wildcat for DAZ and Poser for this set to function!
VGF-X Wildcat Add-on For DAZ and Poser: The culmination of  Variable Geometry Fighter development was the VGF-X program, an attempt to make the Wildcat a true aerospace aircraft. Development was lengthy and major cost overruns and delays saw serious issues with the program. When development was completed it was found that the additional drive engines, thrusters, and missile pods seriously overloaded the basic airframe of the Wildcat and the project was abandoned instead leading to a complete aircraft redesign which resulted in the AVF (Advanced Variable Fighter) project culminating in the YF-35 Warthog aerospace VGF. Despite abandonment, there are still a few examples of this failed experimental system gathering dust at various storage facilities awaiting disassembly and scrapping... *NOTE* You will need my VGF-14 Wildcat for DAZ and Poser for this add-on set to function!
VT-1 Supercat Weapons Set #1: This first Weapons set adds numerous conventional UN/NATO weapons to the inventory of the Supercat. Included are: an External Fuel Tank, Sidewinder Missiles, and Mk-82 Bombs, plus mixed loads of these and the base VT-1 Weapons (6 new sets of weapons in total). All items include numerous ERC Dials for ease of use! *NOTE* You will need my VT-1 Supercat for DAZ and Poser for this set to work!
UNS Oriskany II CVN-92 for DAZ and Poser: Early attempts at utilizing reverse engineered alien technologies were simply too massive to be fitted to smaller vehicles (such as aircraft), and required extremely high power to operate effectively, thus early development was centered around retired warship hulls. Built during the military build-ups of the Global Civil War, the UNS Oriskany II  was the first UN warship to incorporate reverse engineered alien systems from the ground up in her initial design (rather than being an older vessel retrofitted with them). The Oriskany would see service along side older Carriers and newer space-capable vessels in the Civil War ending her career as a UN National Guards vessel when replaced by her more advanced sisters in the newly formed UN Space Fleet. Features include: Fully detailed hangar and bridge spaces, functional weapons turrets, aircraft elevators and bomb lift, aircraft catapults and blast deflectors, radar masts, hangar bay doors, rudders, propellers, and even hangar gantry cranes! There are numerous ERC Dials for ease of use, and this set also includes smart-parented flags, deck crew (low poly), anchors and anchor chains, and a pair of low poly Helicopters for the flight deck! Last the set also includes a scaling pose that enlarges the Carrier to life-sized for use with my transforming fighters!
UAV-18 Specter Macross Textures Set: 2 alternate textures for my UAV-18 Specter to give it the look of the QF-3000 Drone from Macross/Robotech with Pz2 Mat Poses for ease of use... For FAN USE ONLY, NOT FOR COMMERCIAL PURPOSES!
Macross Textures for Airfeild Equipment: *FAN USE ONLY! NOT FOR COMMERCIAL PURPOSES!* This is a set of Macross Fan Textures for use with the free Airfeild Equipment from VanishingPoint.biz (the Towing Tractor, Bomb Loader, Forklift, Weapons Cart etc).
Cyberoid Pinnochia 2.0 for DAZ Studio and Poser: My Anime Cyberoid Pinnochia is based upon my own sketches and art works and has been influenced by many sources. She works hand-in-hand with my Anime Girl Kristin 2.0 found here; sharecg.com/v/97949/gallery/11/Poser/Anime-Girl-Kristin-2.0-for-DS-and-Poser. Please note: that the two included Character Presets (Alita and Kusinagi) are based upon Characters from the Anime/Manga series “Battle Angel Alita/Gunnm”, and “Ghost in the Shell” respectively. They were created to pay tribute to the sources of the inspiration for my anime style of art... as such these 2 characters are intended for FAN USE ONLY! Features; 1) The base Anime Cyberoid Pinnochia full figure with numerous body/head morphs and ERC controls, and a non-morphing Developers Figure to use for rigging etc (to allow users to create new outfits, poses etc). The figure includes over 100 body shaping/control and head/face morphs, and uses fully rigged Eyelids, Eye Brows and Jaw controlled by ERC dials that can be mixed and matched for a huge array of facial expressions! 2) Can use all of the Mat Poses, Textures, Clothing, Hair, Accessories, Pose Presets, and Extras created for my Anime Girl Kristin. Both figures share common UV Mapping and figure Rigging for complete interchange-ability between them! 3) Alternate mat poses and textures including; 5 default skin shades, various alternate versions of the base default skin shades ( over 20 alternate skins!), multiple eye mat poses that can be used on either Pinnochia or Kristin 2.0, and 2 custom Character Presets with custom textures! 4) 2 full clothing outfits, and multiple accessories specifically customized for Pinnochia, with multiple mat poses for a wide range of looks! 5) Tested in Poser 7, 10, and 11 (in both Firefly and Superfly), and DAZ Studio 2.3, 4.5, 4.7, and 4.9 (only tested in 3Delight).
VT-1 Supercat For DAZ and Poser: Based upon the F-14 Tomcat, the VT-1 Supercat was the first aircraft developed using reverse engineered alien technologies as well as implementing new conventional avionics. Featuring Fly-by-Wire flight controls, vectored thrust, and a host of other new systems, the Supercat would also serve as a test-bed for the VGF-14 Wildcat development program. It was used to test various flight and combat systems, and advanced construction materials intended for the VGF-14 Program. Ultimately it would be replaced by its successor in service with the UN Military, the Wildcat Variable Geometry Fighter, and relegated to National Guards use by the time of the Global Civil War in 1997... Features include: Fully functional Flight Surfaces and Cockpit Controls, Dummy Crewmen for the Cockpit, Crew Boarding Ladders, a Basic Weapons Load-out, Numerous ERC Dials for ease of use, and a multitude of Pose Presets for easy scene set-up in still renders!
MX-991/U Crook-Neck Flashlight: The MX-991/U Angle-Neck Flashlight evolved from the earlier US Paratrooper/Rangers issued TL-122 Flashlight issued during WW2. The MX-991 uses a single standard light-bulb and features an inner clear lens, and a replaceable outer lens in clear, red, white, or green plastic. It also has a 3-mode On/Off switch that can set the light fully on, or to a signal mode where the light can be activated by a thumb button for use as a signaling device. Since replacing the TL-122 light in the 1960`s during the Vietnam War, the MX-991/U has become standard issue in most NATO countries and remains in service today. This model comes in 2 versions, the first is fully rigged with a working On/Off switch and signaling button, and the second version is a simple prop version (no moving parts) that is set up to smart-parent to Panko`s Alice Web-Gear for M3 and V3. It also includes separate Inner and Outer Lens materials, and a bulb material for the light bulb inside, so that you can easily change lens filters or set the bulb as a light emitter if you so choose. Also included are poses to position the light to either the right or left hand, and to swap the colors of the outer lens material. The smart-parented versions (there are two) will automatically parent to the Right or Left Shoulders (respectively) of the Alice Webbing when you load the props with the Web-Gear selected in your scene.
VGF-14 Weapons Set #1 for DAZ and Poser: This add-on set provides new weapons for the Wildcat to expand its combat capabilities, there are numerous extra weapons provided and all include ERC Controls for ease of use! *NOTE* You will need my VGF-14 Wildcat for DAZ and Poser for this set to function!
VGF-14 Reactive Armour for DAZ and Poser: Numerous attempts have been made to upgrade the aging VGF-14 to provide greater weapons capabilities and to improve mission survival and adaptability. The first such was the ETO Launch system, then came the LEO Orbital Packs... These led to the failed VGF-X Experimental system and ultimately to the Advanced Variable Fighter Program. A further attempt was made in with the development of the HCA-00 Reactive Armouring system, a series of heavy blow-away plates and missile pods attached to the VGF-14. The Armour can be jettisoned when damaged or when its no longer needed, but unfortunately the system limits the VGF-14 to Mecha Mode while equipped and in the long-run it was only produced in limited numbers for special use. *NOTE* You will need my VGF-14 Wildcat for DAZ and Poser for these items to function!
VGF-14 Macross Fan Textures Set #1: Includes Pz2 Mat Poses to apply Macross alternate textures to my VGf-14. Included in the set are alternate textures for various favorite Macross VF Fighter Squadrons for the VGF-14 Wildcat, and matching textures for the VGF-14 add-on sets. For FAN USE ONLY, not for commercial use!
EA-12 Sky-Eye Weapons Set #1: This pack adds a set of new weapons from the UN arsenal for the Bomber/Strike version of the EA-12B Sky-Eye aircraft. Included are: Sidewinder Missiles, Drop-Tanks, Various extra 250lb and 500lb Bomb loads, and a GBU-44B FAE (Fuel-Air) Bomb. Also included are numerous ERC Dials for ease of use! *NOTE* You will need my EA-12B Sky-Eye for DAZ and Poser for this set to work!
Anime Girl Kristin 2.0 for DS and Poser: My Anime Girl Kristin is based upon my own sketches and art works and has been influenced by artists  and anime movies such as Macross, Orguss, Record of Lodoss War, and Visions of Escaflowne (amongst others too numerous to mention here). Features; The base Anime Girl Kristin full figure with numerous body/head morphs and ERC controls, and a non-morphing Developers Figure to use for rigging etc (to allow users to create new outfits, poses etc). The figure includes over 100 body shaping/control and head/face morphs, and uses fully rigged Eyelids, Eye Brows and Jaw controlled by ERC dials that can be mixed and matched for a huge array of facial expressions! 12 Smart-Parented pose-able and morphing hair styles (with numerous mat poses to change hair colors), along with numerous hair accessories. Over 50 items of "every-day" wear clothing plus numerous mat poses to change colors and patterns. 6 pairs of Eye Glasses (including sun shades), 11 items of Jewelry including a wrist watch, 10 body piercings including earrings, 3 school related props including a hand bag and Cheerleader Pom-Poms, and 5 exercise/gymnastics props. All props are either fully pose-able or are smart-parenting (in the case of jewelry etc). Alternate mat poses and textures including; 5 default skin shades, various swimsuit tan-line versions of the base default skin shades (to match with the swimsuit styles included with the figure), numerous pubic hair alternate mats, multiple alternate eye and fingernail color mat poses, and 6 Character Presets that will load both a character body shape and custom skin mats specific to each character! Over 500 "every-day" pose presets including various Sports, Driving, Sitting, Standing, Laying/Sleeping, School related poses, and much more! Tested in Poser 7, 10, and 11 (in both Firefly and Superfly), and DAZ Studio 2.3 and DAZ Studio 4.5, 4.7, and 4.9 (only tested in 3Delight).
Macross Zero Fan Textures Set for TheSchell Mecha: Macross Zero textures for the VGF-14 Wildcat, EA-12B Sky-Eye, VT-1 Supercat, UAV-18 Specter, and SMF-45 Vampyr to represent aircraft from the Macross Zero series. They are provided in Pz2 Mat Pose format for ease of use and include alternate textures for the Fighters and their add-on sets. For FAN USE ONLY, not for commercial purposes!
UAV-18 Specter Combat Drone for DAZ and Poser: Created originally for NATO as a Close Support and Recon Drone to support Infantry and Special Operations units, the UAV-18 gained from advanced technologies developed for later aircraft. It can operate by remote control of friendly ground forces, or autonomously under a pre-programmed flight profile, and is even able to engage in combat on its own thanks to an advanced AI computer system. The UN Fleet adopted the Specter and it was upgraded to enable the drone to act as a Combat Air Patrol craft for shipboard operations, and it can use data relayed from the Mother-ship's radar and sensors to intercept enemy attacks and defend the task-group... freeing the other aircraft of the Fighter Wing for attacks and support! This figure includes a basic weapons load-out and a number of extras, and features numerous ERC Dials for ease of use!
UAV-18 Specter Weapons Set #1: This weapons expansion adds a set of Sidewinder Missiles, and 250lb FE Bombs to the arsenal of the UAV-18 Specter. The weapons are fully pose-able and include multiple ERC Dials for ease of use! *NOTE* You will need my UAV-18 Specter for DAZ and Poser for this set to work!
SMF-45 Weapons Set #1: This weapons expansion set adds 5 new weapons from the Warsaw Pact inventory for the SMF-45 Vampyr. Included are 550lb Bombs, Multi-Missile Pods, a Laser Designator Pod, and two weapons mixed loads with ERC controls for ease of use! *NOTE* You will need my SMF-45 Vampyr for DAZ and Poser for this set to work!
VGF-14 Wildcat for Poser and DS: Introducing the VGF-14 Wildcat 3-Mode Variable Geometry Fighter from Earth Avionics. Developed upon the famed F-14 Tomcat and using reverse engineered alien technologies, the VGF-14 is the latest in state-of-the-art Military hardware. Armed with the latest in UN Military weapons and systems, the Wildcat rules the sky! Features include fully functional cockpit controls and flight surfaces, numerous ERC dials for ease of use including 3-stage real-time transformation, a multitude of pose presets for various action poses, ERC controlled fully pose-able weapons, and even detailed Pilot dummies to place in the cockpit!
SMF-45 Waepons Set #2: This set of additional weapons for the Vampyr represents older weapons systems in the Warsaw Pact inventories. Included are Atoll, Alkali, and Alamo Missiles, additional 55lb Bombs, and 3 sets of mixed weapons to expand the arsenal for the SMF-45. All items in this set include a multitude of ERC Dials for ease of use! *NOTE* You will need my SMF-45 Vampyr for DAZ and Poser for this set to work!
DAZ Studio Dynamic Bodice Shirt Textures: Mix and match textures for free Bodice Shirt from Optitext. Will tone with other sets. DOES NOT WORK IN POSER AT THIS TIME!
Country Great Room: A texture set for the Dream House Great Room giving it more of a country feel.
The Audience is Watching: A simple poser prop of the silloette of a groups of "Heads and Shoulders" to look like an audience. Can be used in the foreground of your scene to look like a cinema audience. Two or more pros can be used "side-by-side" or overlapping to look like a bigger audience. Enjoy!
Groovy 60`s Style Sunglasses: A pair of groovy looking sunglasses for any of your poser characters. I originally made these for sale at Renderosity, but now i`ve decided to re-release them for free. They were originally made for the Poser 5 judy figure but they should work ok for any others. the glasses are fully posable, you can open and close the arms and i have also supplied a prop version for general wearing, walking etc. For Personal or Commercial use, By foxtare at poseraddons.com you can Email me at stiradi@yahoo.com. I hope you like them.
EVFS Flying Saucer For Poser: A model for Poser of one of the legendary Ray Harryhausen`s Flying Saucers From the Columbia Picture THE EARTH VS THE FLYING SAUCERS. The model is fully posable with retractable door tube,rotating top and bottom discs, operating raygun hatch and rotating and retactable and tiltable raygun. Uses the default chrome material in poser 6 but can be easily changed in the material room for a different look if desired. By foxtare at poseraddons.com email me at stiradi@yahoo.com. For strictly non-commercial use only as Ray and Columbia own the design copyright. I hope you like it, enjoy!
Fantabulous Egg Chair for Poser: A fabulous egg chair for your poser characters to sit in, this model was originally on sale at Renderosity, but now i have decided to release it for free. The model features a rotatable and tilting base. Material changes can be made easily via the material room if you desire a different look. For commercial use, but please don`t re-distribute the mesh! By foxtare at poseraddons.com email me at stiradi@yahoo.com enjoy!
Colt 1911A1: MattyManx kindly converted these to poser. You will find it in props/weapons. Please let me know if you have any problems. Enjoy.
M1 Carbine: MattyManx kindly converted these to poser. You will find it in props/weapons. Please let me know if you have problems. Enjoy.
Hand Poses for Jack of Hearts: Hand poses for the sword and gun from Jack of Hearts by Luthbel, available at DAZ3D.com. Poses are .hd2 format.
Costa Rica Backgrounds: Costa Rica Backgrounds are a series of 11 real-world images taken in the beautiful country of Costa Rica. You can have your settings and characters anywhere from the volcanoes Poas or Arenal to watching the sun set of San Jose with this set! All files are at least 1600x1200 (or 1200X1600), and are at 200 dpi. All of this product's contents are pictures taken by tag0.
Water Backgrounds: Water Backgrounds are a series of 10 real-world images. You can have your settings and characters anywhere from the beach to a waterfall in the rain forest with this set! All files are at least 1600x1200 (or 1200x1600) and 200 dpi.
SynthFur's Halter Top Texture: A texture for Little_Dragon's Halter Top
Eternal Moon Article: The Eternal Moon Article was the transformation brooch that allowed Usagi Tsukino to transform into Eternal Sailor Moon. It was an upgrade to the Crisis Moon Compact, created when the eight Sailor Senshi came together and combined their powers, focused on Super Sailor Moon. Her brooch fluctuated between the Crisis Moon Compact and the Eternal Article until episode 172, where all ten Sailor Senshi along with Prince Endymion combined their power against Queen Nehellenia; from then on the change was permanent. I reccommend using the DAZ Chrome Shaders and the Calidia Gemstones for best results.
Usagi Poses: A new Sailor Moon Freebie for everyone who uses any 3D program. These are inspired by Sailor Moon's poses in the anime.
Luna-P: The Luna-P ball companion to Chibi-Usa in Bishoujo Senshi Sailor Moon. Created in Bryce 5 PLE Update: Added the .obj file ^^ For Poser and DAZ|Studio Chibi-Usa's not included. Model used for Chibi-Usa: NearMe Hair: Chibi-Usa hair from http://www.realmofsavage.com/ProjectSM_hair.htm Sailor Outfit from Poserclub.org Bishoujo Senshi Sailor Moon (c) Naoko Takeuchi
Usa-Chan Version 1.0: Another poser freebie, this one is for all those Ouran artists out there. ^^ A free Usa-Chan prop for all your loil needs. Note: Everything's included but for some odd reason the filenames are funny acting...so they may say you need to locate the files but its' all in the zip. I am gonna be releasing Usa-Chan 2.0 very soon once I model him. Created in Bryce
Crystal Change Rod: Crystal Change Rod was the collective name for the transformation pens given to the four Inner Senshi by Pegasus which allowed them to transform into their "Super" form. The rods appeared only in the anime. A brand new freebie for all of you Sailor Moon lovers! this one is based upon the wands used in the Sailor Moon Super S season. ^^ The textures have to be added in manually as I don't know how to make Mat poses yet. ^^ Bishoujo Senshi Sailor Moon (c) Naoko Takeuchi
Prism Heart Brooch: The Prism Heart Compact, also referred to as Pink Sugar Compact (ピンク・シュガー・コンパクト), was Chibiusa's first transformation item, which she used to transform into Sailor Chibi Moon.
Maboroshi no Ginzuishou: Another Sailor Moon themed freebie, this one is the Maboroshi no Ginzuishou (or The Imperium Silver Crystal in the English Dub) Information: The Silver Crystal, or in Japanese, the Maboroshi no Ginzuishou (幻の銀水晶; often translated as Illusionary Silver Crystal), was an object of great power in the Sailor Moon storyline. This crystal originally belonged to Queen Serenity, who ruled the Solar System from the Moon Kingdom during the era of the Silver Millennium. By the power of the Silver Crystal, the people of the Moon were able to enjoy long, peaceful lives. The Moon Kingdom watched over the planet Earth and the Solar System in this time of peace. When the Moon Kingdom was destroyed by Queen Beryl under the influence of Queen Metalia, the Queen's daughter and only heir, Princess Serenity, was killed. Also killed were all the guardians of the Moon Kingdom, the Sailor Senshi, and the Prince of the Earth, Prince Endymion, who had been in love with Princess Serenity. With no hope for the future, Queen Serenity used the power of the Silver Crystal to seal the enemies of the Moon Kingdom. She also used it to send her daughter, the prince, and all of the Sailor Senshi to the future on Earth where they would be reborn to hopefully live peaceful lives. However, just in case the dark forces would reawaken, she also sent two feline guardians to the future to help the Sailor Senshi if need be. With the loss of the Silver Crystal, the Queen died on the remains of the Moon Kingdom. Another freebie for all you sailor moon fans! I hope you guys enjoy it! ^^ I might do the rainbow crystals next!
Star Power Sticks: Star Power Sticks were the second transformation items used by the Inner Senshi (except Sailor Moon) in the anime and manga. They were given to the Senshi by Luna. ^^ The R season freebies keeps on coming! these are for all of you Sailor Moon fans out there!And I have included a bonus prop for the Sun. 
Pluto Lip Rod: The Lip Rods were transformation items used by Haruka Tenou, Michiru Kaiou, and Setsuna Meiou to transform into Sailor Uranus, Sailor Neptune, and Sailor Pluto respectively.
Aiko and Hiro Couple Poses 01: Anyway I created some anime poses last year and I finally got a few that are totally rockin to be couple poses since there are a serious lack of poses for Aiko3 and Hiro3. ^^ Here are some freebies which I hope you all enjoy using. These were created and test in DAZ|Studio. So enjoy using them! And let me know what ya think! If you guys like it I might do a second pose pack! Outfits and hair shown in the promo image are not included. ^^ sorry, but you gotta purchase them on your own!
7 Rainbow Crystals: A new Sailor Moon Item Freebie! ^^ The 7 Rainbow Crystals from the anime series. Information:The seven Rainbow Crystals, or Nijizuishou (虹水晶), were present only in the anime. They were separate sections of the Silver Crystal, which came apart when Queen Serenity sealed away the Dark Kingdom's greatest warriors, the Seven Great Youma, during the attack on the Moon Kingdom in the Silver Millennium. Their colors were: red, orange, yellow, green, blue, indigo, and violet. They were sealed into six humans and one cat, each of whom were eventually tracked and attacked by members of the Dark Kingdom. Once the crystals were removed from their bodies, the carriers became the Great Youma they had the connection with. Sailor Moon was able to return them to normal with Moon Healing Escalation. Not all of the rainbow crystals fell into the Dark Kingdom's hands; the Sailor Senshi and Tuxedo Mask/Mamoru managed to obtain some of them. However, ultimately the minions of the Dark Kingdom got the crystals the Senshi possessed, so that Mamoru and the Dark Kingdom had all of them between them. The Dark Kingdom sought them to reawaken the Seven Great Youma, while Mamoru sought them because he was having dreams that indicated they would help him find the Silver Crystal and regain his lost memories. In the episode "The Sparkling Silver Crystal! The Moon Princess Appears," Zoisite challenged Mamoru to a fight for his rainbow crystals, with the winner taking possession of all seven. When Zoisite sent a secret attack at Sailor Moon's back, Tuxedo Mask took the hit for her and was mortally wounded. Sailor Moon cried a single tear, which gathered the power of the rainbow crystals and reformed into the Silver Crystal. The rainbow crystals were exclusive to the anime and did not exist in the manga. Do not redistribute, Edit or Sale
Sailor Tools:  A set of tools made for all of you magical girl fans. These items are based off of the anime series Bishoujo Senshi Sailor Moon.
Holy Grail: The Holy Grail is the item that Sailor Moon used in the Sailor Moon S to become Super Sailor Moon and to use Rainbow Moon Heart Ache.This is a freebie for all Sailor Moon Fans! 
Uranus Lip Rod: The Lip Rods were transformation items used by Haruka Tenou, Michiru Kaiou, and Setsuna Meiou to transform into Sailor Uranus, Sailor Neptune, and Sailor Pluto respectively.
Holy Moon Calice: The Holy Moon Cálice was an item belonging to Sailor Moon which had different origins and functions in the anime and manga.In the anime, the Holy Moon Cálice was never discussed or given a name. It first appeared in episode 187 after Sailor Chibi Chibi Moon gave Eternal Sailor Moon the power up which allowed her to perform Silver Moon Crystal Power Kiss.Another Sailor Moon themed freebie from the Sailor Stars Season this time. This was pretty complex to complete and I am happy with how it came out! <3
Pregnancy Test Box: A pregnancy Test box for all your poser people who might think they're expecting
Froggy Hat: A froggy hat for all your Poser People's warmth and cuteness!
Pregnancy Test: My first draft for the Pregnancy tests.  It's currently the only prop that doesn't have a texture to it as I don't know how to make them but anyone is free to make textures for it!  Anyway enjoy! 
Crescent Moon Wand Freebie: A free Crescent Moon wand for all of you out there who wish to bring a little Moon Prism Power to your renders. Information: The Moon Stick (Crescent Moon Wand in the English Dub) was used by Sailor Moon to perform the Moon Healing Escalation attack. In the anime, the Moon Stick had an alarm within it that went off whenever a Rainbow Crystal carrier came near it. The Moon Stick became more powerful after the Silver Crystal was docked to it. Queen Serenity was the previous owner of the Moon Stick. This was created for everyone and I hope you all enjoy it! However there is a surface named "Star" which is useless to say the least but I didn't know how to get rid of it. So don't turn it on if you don't want the Crystal hidden. The Manga Texture will be packaged with the PGSM textures once I finish them.
Neptune Lip Rod: The Lip Rods were transformation items used by Haruka Tenou, Michiru Kaiou, and Setsuna Meiou to transform into Sailor Uranus, Sailor Neptune, and Sailor Pluto respectively.
Cutie Moon Rod: The Cutie Moon Rod was the weapon used by Sailor Moon to perform the Moon Princess Halation attack. In the anime it was given to her by Queen Serenity, while in the manga it was created by the love between Princess Serenity and Prince Endymion.The Rod was pink with three gold stars, a red jewel at the bottom, and gold wings. It was topped with a red sphere inside a gold crescent moon, above which sat a tiny crown.
V3 Africana: V3 Textures: Body and Head. I have added poser load files (MAT pose and Materials) for easier use. Do not sell this textures (of course, you can sell the renders you do with it). Comments are welcome: randyerlobo@hotmail.com
Honey(Yanelis' HoneyMoon Corset): 5 textures for yanelis HoneymoonCorset available at RDNA. 5th texture shown here http://bellsbox.com/GothP.jpg Panty is from Red Black and White http://www.renderosity.com/mod/bcs/index.php?vendor=_Al3d_ http://bellsbox.com/HoneyReadme.txt WITCHY TEXTURE IS FIXED
Dreamy (Yanelis' Sensua II for VA/A4): 6 textures for the outfit. When applying texture to corset and panty you will use only one mat for each piece. i.e Brown will texture both the corset and the panty, just click and apply. http://zips.bellsbox.com/Cream.jpg http://zips.bellsbox.com/Purple.jpg
Future Fashions (for Elven Strapped): A set of 6 textures for Aery Souls Elven Strapped. Designed for Poser 4 and up, not tested in DazStudio. If there are any problems, please do not hesitate to tell me and I'll try to fix the problem asap. Comments are welcome!
Leather Stily UPDATED: This is an update of THIS file. The old file has no shaders os displacement maps, and is sutible for DAZStudio. This new file was created in Poser 7 for version 4 and up. If there are any problems, please do not hesitate to tell me and I'll try to fix the problem asap. Resources used Luscious Leathers VolII: http://www.renderosity.com/mod/bcs/index.php?ViewProduct=54266 Leather +++: http://market.renderosity.com/mod/bcs/index.php?ViewProduct=44061 DD - Harem Sundries 1: http://www.renderosity.com/mod/bcs/index.php?ViewProduct=56995 http://www.sharecg.com/v/5700/texture/Leather-Texture http://www.obsidiandawn.com/stitches-sutures-photoshop-gimp-brushes
Basement Corner Scene: This is a simple Poser 6 figure that is the corner of a basement.
Aiko Walk: Walk Pose for Aiko3 and Aiko Le..textures..clothes..hair not included..File only for Daz Studio,needful.. BiekeReadMe!
Bianca for A3: My first Character for Aiko3,not for Aiko Le..Face morph only,textures,hair, etc..not included..poser format,only tested in Daz Studio. For commercial or non commercial use Enjoy!
Hair Fits for Toon Baby: 10 Hair fits for Toon Baby..DSB format only..for various hairs available at Daz3d,and freebie hairs..more info in the BiekeReadMe...
Snowbug's Sadie PoseSet 1: A set of 7 poses + mirrored versions for 3D Universe's Sadie. Tested in Poser 7 and DAZ Studio 2.
Sadie Magical Girl Poses: A set of 10 "magical girl" inspired poses for Sadie. This set was originally given as Christmas freebie at Faeriewylde. Some of the poses have been reworked, though, and all have been resaved. Tested in Poser 7 and DAZ Studio 2.
teddy bear redone: I redid my teddy bear prop for poser. Included an all new uv map as well:) same conditions as before. enjoy
cool shades for thebear :D: Quick set of shades so the teddy can kick back and relax in style ;)
Web Wings for Universal Wings: Web textures created for the free Universal Wings from Faerie Wylde
Web Wings for Universal Wings 2: Web textures created for the free Universal Wings 2 from Faerie Wylde
A3 Fetish Textures I: Textures for ~lelu's Fetish set for A3 http://www.deviantart.com/view/24710185/ Includes: 4 fabric sets for the bra, corset & gloves 1 black & white latex set 1 black latex set for the pants & skirt 5 necklace textures diamond textures for the cross earrings, hoop earrings, & rings
A3 Fetish Textures II: Textures for ~lelu's Fetish set for A3 http://www.deviantart.com/view/24710185/ Includes: 3 lace sets & 2 latex sets for the bra, corset & gloves 2 latex sets for the pants & skirt 2 necklace textures diamond textures for the cross earrings, hoop earrings, & rings
Textures For Koz's Short Bob: Short Bob available @ Digital Babes 16 textures & MATs
Devanar Hair Beanie Textures: 10 textures for AprilYSH's Devanar Hair Beanie PC and Mac compatible, for Poser 4 and above- not sure about D/S for Devanar Hair by AprilYSH available at DAZ
Black Lotus Textures: 2 worn texture sets for Aery Soul's Black Lotus. PC and Mac compatible, for Poser ProPack and above.
Rievel Hair Fits for Andre and Pierre: Rievel Hair fits for Andre and Pierre by AtlantiStyle. Requires: Rievel Hair by AprilYSH Andre M3 by AtlantiStyle
Zoel Fantasy Textures: 6 Fantasy texture sets for Zoel for V4 by Aery Soul (free item)
Grinch Poses: 9 poses and 1 zero pose for The Grinch, that can be downloaded here at ShareCG http://www.sharecg.com/v/46793/gallery/11/Poser/The-Grinch can be used in poser 6 and on up
Anycolorilike: Conforming Wedge Sandals for Sadie: A pair of basic conforming shoes for 3D Universe's Sadie Character available at Daz3D.com. They come with three texture options and a pose for Sadie's feet. There is also a texture template in the readme folder. One texture uses public domain resources from: http://openclipart.org/media/files/Peileppe/4700 I hope you enjoy them. You may use these for any renders, commercial or non-commercial. You may not re-distribute the files.
Texture Template for Sadie Clothing Set1-Swimsuit: Texture Template for Sadie Clothing Set1-Swimsuit Use the template to make textures for Sadie's swimsuit for personal or commercial use. No re-distribution of this template.
Texture Templates-Sadie Clothes Set1-Shoes: Texture Templates for the Sadie Clothes Set1-Shoes. This time I have included a second file with material zones laid out and a partial legend for the tricky zones. Unrestricted use except for re-distribution of the template.
Texture Templates-Sadie Clothes Set1-Vest & Shorts: Use these templates to make textures for Sadie's Vests and Shorts for personal or commercial use. Unrestricted use as noted below except no re-distribution of this template.
Sadie Summer Dress - Orange Theme: Three orange themed mat poses for the 3D Universe Sadie Summer Dress. I used a Creative commons Attribution Share Alike image creating this therefore it is released under the same license. Attribution: http://carlofunebre.deviantart.com/art/blue-orange-51822284 Creative Commons License: http://creativecommons.org/licenses/by-sa/3.0/
Sadie Head and Body Texture Template Part 1: Uploading a basic texture template in case anyone is eager to get started and can use it. I won't get around to making a better one with a legend, colorized etc. for a couple of weeks perhaps. Unrestricted use except re-distribution of the template.
Sadie Dancer Dress V1: A pretty dress for Sadie: A dress for 3D Universe's Sadie Character available at Daz3D.com. It comes with four basic Poser 6 material sets (one tetured) and 4 basic MAT Poses for Daz Studio. They also come with some matching Poser material libs/poses for Sadie's long hair and my old Wedge shoes. Finally there is a texture template in the Readme Folder where you found this...Please make textures if you enjoy this dress! I hope you enjoy it and render it. You may use the dress for any renders, commercial or non-commercial. You may not re-distribute the files. Thanks!
My Default Lights: The Lights I use normally in my "preferred state" file
Freak Sci-Fi Suit camoflage patterns: A set of seven camouflage patterns for the Xurge 3D Sci-Fi suit on www.xurge3d.com. High quality realistic fractal camouflage for the Freak's more dangerous adventures. Includes Poser 5/6/7 MAT poses and JPEG textures, just unzip to your Poser 5/6/7 Runtime folder. Poser 4 users or DAZ Studio users may use the textures but will need to apply them manually. Images only depict some of the patterns provided.
FA Thunderlifter Heavy DropShip Update: NOTE: This UPDATE is useless without the original commercial product! This item is a free update for customers who bought my FA Thunderlifter Heavy DropShip for Poser from the now defunct 3D Commune site. As 3D Commune is no longer trading I was unable to provide the update through the normal store update process, and this is the best way I know to provide it. Customers who bought through places still trading can get a full update from the site where they purchased the model.
Victoria 4 ChainSword: A ChainSword Smart-prop for Victoria 4, smart-propped to her right hand and with a pose for the hand. Useful for the January sales...
Stealth UAV aircraft.: A full-featured model of a Stealth UAV, or what used to be called an RPV (Remotely Piloted Vehicle). The plane has a weapons bay and a choice of three weapons loads is provided, each load is a set of smart-props for the weapons bay loaded with one click. Click on the main body of the plane for the control dials. It has moving control surfaces, working landing gear including a steerable nose-wheel, and the weapons bay doors can be opened to show bombs or missiles being dropped. Markings are provided for Kudai, USAF, US Army and the UK's Royal Air Force. The Kudai are a fictional alien race allied with Earth's NATO, and to represent them always use the Freak or a similarly built character; the Freak would nicely represent the average fit Kudai adult male. The Freak 4 is better for extra-fit Kudai (like soldiers). I haven't tested this in DAZ Studio as Studio won't run on my computer; the UAV should work but will be too shiny until you adjust the material settings. I intend to support DAZ Studio as soon as I get a computer that will run it.
FA Hercules Textures: A set of textures with MAT poses to apply them to the Freak Hercules outfit (found at DAZ3D). Ancient northern European heraldry or use them as a fantasy set. The spiked hammer is not part of the set and no textures for it are included.
Alien Woman character for 3D Universe Sara figure.: An alien character originally developed for Poser 4, now updated to work with Poser 5 and later. Texture maps, morphs, poses, props and smart-props made to work with both the original Sara and the new version. Ten eye colour choices for extra versatility.
FA WhisperStar Police colours: This is a set of textures and MAT poses for the WhisperStar sci-fi helicopter for Poser, available from On Target 3D and Renderosity. It provides real-world Police colours for the WhisperStar, for a number of US, UK and two different Canadian Police forces. They are: NYPD LAPD City of Miami Police Philadelphia Police Chicago Police Illinois State Police Houston Police Metropolitan Police (London, England) Kent County Constabulary (England) Thames Valley Police (England) Toronto Police (Canada) Royal Canadian Mounted Police None of these could be provided as commercial items for legal reasons so here they are as a freebie. Enjoy! Note that there is a matching texture set for my FireStar Sedan, so you can show the car and the helicopter parked or working together. Check my gallery to see the rest of my freebies. UPDATE: 9 August 2013 to add a missing texture map for the Miami Police set.
Poser dial-driven measuring tools: A set of three measuring tools for Poser and DAZ Studio. These can be used to measure figure heights, building heights or set up as a reference for a modelling program when you want to build models to a precise scale for Poser. There is a Feet And Inches figure, an Inches Only figure and a Meters figure for those who need to scale or measure in the Metric system. Both of the images show the Feet And Inches figure being used to measure V4's height and show that the measure gives her the DAZ official value of five feet and ten-and-a half inches. Check my portfolio for my other Poser measuring tools.
FA FireStar Police forces set.: MAT files, bodywork and license plate textures only. Uses textures from the commercial product for the rest of the car and will only work on this product. This is a set of textures and MAT poses for the FireStar sci-fi Sedan for Poser, available from On Target 3D and Renderosity. It provides real-world Police colours for the FireStar, for a number of US, UK and two different Canadian Police forces. They are: NYPD LAPD City of Miami Police Philadelphia Police Chicago Police Illinois State Police Houston Police Metropolitan Police (London, England) Kent County Constabulary (England) Thames Valley Police (England) Toronto Police (Canada) Royal Canadian Mounted Police None of these could be provided as commercial items for legal reasons so here they are as a freebie. Enjoy! Note that there is a matching texture set for my WhisperStar helicopter, so you can show the car and the helicopter parked or working together. Check my gallery to see the rest of my freebies.UPDATE: Updated August 7 2013 to correct a problem; missing Chicago Police body texture.  If you downloaded before then please download again.
FireGhost Tigers: This add-on fills a request from customers who bought my FireGhost fighter. Colours for the FireGhost representing the 23rd fighter group, known as The Flying Tigers; combat colours for the 74th, 75th and 76th fighter squadrons plus an air-show/tiger meet paint job with all three squadron badges on. Full commercial quality textures at 4000x4000 pixels for close-ups or large renders. The plane itself is available from On-Target 3D or the Renderosity marketplace; just search for FireGhost.
WhisperStar Coastguard colours: Two texture sets for the WhisperStar helicopter, one provides US Coast Guard colours and the other provides UK Coast Guard colours. Both are loaded by MAT poses. TEXTURES and MAT POSES ONLY.
WhisperStar California Highway Patrol textures.: MAT file and fuselage texture only. Uses textures from the commercial product for the rest of the helicopter and will only work on this product. A set of textures to make my FA WhisperStar sci-fi helicopter (available from On-Target 3D and Renderosity) into an aircraft from the California Highway Patrol. One texture map for the fuselage and one MAT pose to apply it. For legal reasons the badge of the California Highway Patrol cannot be sold without permission, so here it is as a free addition to the helicopter. Note that there is a matching texture set for my FireStar Sedan, so you can show the car and the helicopter parked or working together. Check my gallery to see the rest of my freebies.
Japanese NightGhost MAT for the FireGhost fighter.: Japanese NightGhost texture add-on for my FireGhost Fighter Plane, get the plane from my Renderosity Store or On-Target 3D store. All files are copyright 2011 The Fire Angel. Not for redistribution without permission! Commercial renders are OK, do not redistribute the files themselves. The product provides one MAT pose and the textures to go with it. Note that the textures provided are only the upper and lower surfaces of the fighter, the remainder of the textures needed (cockpit, screens, undercarriage etc.) are already installed by the FireGhost commercial product. You will find the MAT pose in the "FireGhost Night MAT" folder.
NightGhost texture add-on for FireGhost fighter: NightGhost texture add-on for my FireGhost Fighter Plane, get it from my Renderosity Store or On-Target 3D store. All files are copyright 2011 The Fire Angel. Not for redistribution without permission! Commercial renders are OK, but be aware that the squadron badges used for the US Air Force version are the property of the US Air Force, and they can afford lawyers. Don't make images that are defamatory to the US Air Force or that imply endorsement by them of any product or service you or others may provide, unless you obtain permission from the relevant squadron commander. The commander to contact is the commander of the US 9th Reconnaissance wing, which used to include the 1st reconnaissance squadron. The product provides four MAT poses and the textures to go with them. Note that the textures provided are only the upper and lower surfaces of the fighter, the remainder of the textures needed (cockpit, screens, undercarriage etc.) are already installed by the FireGhost commercial product. You will find the MAT poses in the "FireGhost Night MAT" folder.
FA FireGhost Custom Texture Kit: A set of textures at 4000x4000 resolution for the FireGhost Stealth rocket fighter available from my Renderosity store. These are for making your own textures to apply to the FireGhost, so they have no badges, insignia or text on them, allowing you to apply your own. You may redistribute textures made using these files as a base, but only as free items. See the text file in the archive for details.
FA FireGhost teams add-on: Textures and MAT poses to add the colours for three of the world's best known aerobatic display teams to the FireGhost fighter plane. The Royal Air Force Red Arrows, the US Air Force Thunderbirds and the US Navy's Blue Angels, all ready to fly into your runtime. The FireGhost fighter for Poser is available from my Renderosity store.
FA APV Police texture set.: A pair of Police texture additions for my FA APV Armoured Patrol Vehicle (the vehicle itself is available from the Renderosity Marketplace). MAT Poses are provided for easy use. A customer request was responsible for this freebie.
FemaSu high quality Seam Guides: A set of high quality seam guides for FemaSu from RDNA. These provide colour coded seams, numbered link-up guides, and even rendered images fitted into the blank areas to show where the seams end up. A reduced size extract is shown. NOTE: This item is for the old FemaSu, so the seam guide is useful only to those who already have the old version of the figure that was sold at RDNA.
Poser height measuring rulers: Two simple Poser rulers for measuring the height of Poser people or props. One is in feet and inches and the other is in Metres and Centimetres. They may be imported into a modelling program to help scale items for Poser, see the readme file for details. Check my portfolio for some dial-driven tools if you need to measure more precisely or to measure much larger objects.
Fire Angel's Havoc MAT poses: Fire Angel's Havoc MAT poses. Copyright 2011 The Fire Angel; UPDATED July 2013. With the recent revival of interest in this excellent figure I decided to make icons for my custom MAT poses and then to make them freely available. It's an old figure and came with MAT poses for Poser 4, while the world has moved on to Poser 8 and 9 and DAZ Studio 3 and 4. While DAZ Studio is being covered by other authors, my MAT poses will help those using Poser 6 or later. Do not redistribute the files without permission. Use your renders for anything you like. This downoad contains a set of MAT poses that work with the Havoc figure and the expansion pack, plus some useful poses for the figure. NO TEXTURES ARE INCLUDED, THIS SET REFERENCES THE TEXTURES IN THE COMMERCIAL PRODUCT. NOTE that if you don't have the expansion pack, only one of the MAT poses will work, the one for "Default Standard Res". All of the figure Poses should work of course. My MAT poses give a less shiny look and a slightly more metallic sheen to the figure than the originals did in Poser 4.UPDATE: The original version of this package set up Poser materials that only worked well in some types of Poser lighting; I have updated them all and the materials provided by these MATs now should work well in almost any Poser lighting.
Flying Tigers Colours for FA Stormbringer DropShip: A set of textures with MAT poses for both Poser 6 and above or DAZ Studio 3.1.2.32 or later.  This set provides two versions of the colours of the 41st Lift Squadron, (currently the 41st Airlift Squadron), part of the 23rd Wing, known as the Flying Tigers.  There is also a small clip-art folder providing the badges used to prodcuce the texture set.  The FA-Stormbringer DropShip is available from my On-Target 3D store or my Renderosity Store.  Two paint schemes are provided, a peacetime or "airshow" set in full colour, or a subdued set in shades of grey.  Take a look at the images if in doubt.Small amount of clip-art, Textures and MAT poses only, the model is a commercial release.
Pan Am Colours for Stormbringer DropShip: Textures with MAT poses, note no spacecraft is provided that is available from On-Target 3D or Renderosity.   Some .pp2 files to provide suitable Drop tanks to match the new paint schemes.  Makes the DropShip into a civil shuttle in Pan Am colours, named either the "Spirit of New Orleans" or the "Spirit of New York".  Shades of 2001?
Japanese Colours for the Storm-Hammer tank pack.: This package provides textures and MAT poses for the Storm-Hammer tank pack.  It adds colours for the Japanese 7th Armoured Division to the textures available for the tank with both Poser and DAZ Studio MAT poses to apply them.  There is also a small Clip-Art set to allow you to texture uniforms and other items to match.  The Storm-Hammer Tank pack is a sci-fi product available for Poser and DAZ Studio on the On-Target 3D web site and also from the Renderosity Store.  NOTE no tank model is in the download, just the textures and MAT poses.
US 1st Cavalry Colours for Storm-Hammer tank pack.: This download provides colours for the FA Storm-Hammer Tank pack, to give the vehicles in the set the markings of the US 1st Cavalry Division.  Note that the package itself contains no vehicles, the set of vehicles is a commercial Poser product available from On-Target 3D and Renderosity.  Both textures and MAT poses are provided, the MAT poses are in both Poser and DAZ Studio format so users of both programs may get good results. Sample renders are all made in Poser but the DAZ Studio ones will give results of equal quality.  As well as the textures and MAT poses a small clip-art collection is provided, containing various insignia used by the US 1st Cavalry Division.  The clip-art can be used for texturing uniforms, sets and other vehicles you may own.  A matching download has been made for the Guardian APC pack so purchasers of both products will be able to represent the division in action with a full range of armoured vehicles.US 1st Cavalry Division is the largest heavy division in the US Army and throughout NATO is generally considered the most competent armoured division in the US Army.
DHL Colours for Stormbringer DropShip (Updated): NOTE: Missing file (one of the icon .PNG files) has been corrected, if you have this problem download again to get the fixed version of the .ZIP file.  One of the texture files has also been updated and looks better to me at least.Textures with MAT poses, note no spacecraft is provided that is available from On-Target 3D or Renderosity.   Some .pp2 files to provide suitable Drop tanks to match the new paint schemes.  Makes the DropShip into a civil shuttle in DHL colours.  No doubt the VTOL nature of the Stormrider shuttle would enable DHL to deliver to places that a less capable shuttle spacecraft wouldn't be able to manage.  As the DHL logo couldn't be sold with the package this texture download is given as a free download.
United Nations Colours for FA Stormbringer.: A Customer request; Colours to make the Stormbringer into a United Nations spacecraft.  One set of textures plus MAT poses for both Poser 6 and above or DAZ Studio 3.1.2.32 or later; plus a new prop file (pp2) to provide the external tanks in the right colours too.  The MAT poses are one for Stormbringer and one for the weapons pods.  The UN insiginia and flag is protected by law in member countries from commercial exploitation, so here are the colours as a free item for those that want them.  Textures are not all present, many referenced by the MAT poses are provided in the commercial product.  The Stormbringer DropShip package is available from On-Target 3D and also from Renderosity.
Hawaiian Airlines Colours for FA Stormbringer.: Textures with MAT poses, note no spacecraft is provided that is available from On-Target 3D or Renderosity.   Some .pp2 files to provide suitable Drop tanks to match the new paint schemes.  Makes the DropShip into a civil shuttle in Hawaiian Airlines colours.  No doubt the VTOL nature of the Stormrider shuttle would suit the Hawaiian island chain very well.
US 1st Cavalry Divn Colours for Guardian APC Pack.: This download provides colours for the FA Guardian APC pack, to give the vehicles in the set the markings of the US 1st Cavalry Division.  Note that the package itself contains no vehicles, the set of vehicles is a commercial Poser product available from On-Target 3D and Renderosity.  Both textures and MAT poses are provided, the MAT poses are in both Poser and DAZ Studio format so users of both programs may get good results.Sample renders are all made in Poser but the DAZ Studio ones will give results of equal quality.  Not all of the textures provided are shown in the sample renders so take a good look at the package; there are quite a few options.  As well as the textures and MAT poses a small clip-art collection is provided, containing various insignia used by the US 1st Cavalry Division.  The clip-art can be used for texturing uniforms, sets and other vehicles you may own.  A matching download will be made for the FA Storm-Hammer tank pack so purchasers of both products will be able to represent the division in action with a full range of armoured vehicles.US 1st Cavalry Division is the largest heavy division in the US Army and throughout NATO is generally considered the most competent armoured division in the US Army.
Night Stalkers for Stormbringer: A texture for the FA Stormbringer DropShip, available from my stores at On-Target 3D and Renderosity.  As real unit insignia are protected from commercial exploitation by US law, here's the texture set as a free item.  This is the colours of the 160th Special Operations Aviation Regiment, the unit that provided the stealthy helicopters that carried SEAL team 6 on their raid on Osama Bin-Laden's home.  Textures and MAT poses for Poser 6 or later and and DAZ Studio 3.1.2.32 or later; note that only two texture maps are provided, the rest of the maps needed are installed by the commercial release of Stormbringer.NOTE: This is the updated version of this freebie, with a sensible ReadMe file; the old one was a corrupted version of that file and had a ReadMe with 134Mb of garbage tacked on the end!  Strangely only one person noticed, which confirms the old adage that almost no-one reads the readme...
FA FireStar California Highway Patrol textures.: MAT files, bodywork and license plate textures only. Uses textures from the commercial product for the rest of the car and will only work on this product. A set of two textures to make my FA FireStar Sedan (available from On-Target 3D and Renderosity) into a car from the California Highway Patrol. Two textures for the bodywork and two license plates are available, so you can have more than one patrol car in your scene and they will have different plates and bodywork serial numbers. For legal reasons the badge of the California Highway Patrol cannot be sold without permission, so here it is as a free addition to the car. Note that there is a matching texture set for my WhisperStar helicopter, so you can show the car and the helicopter parked or working together. Check my gallery to see the rest of my freebies.
Japanese Colours for the FA Guardian APC Pack.: This package provides textures and MAT poses for the FA Guardian APC pack.  It adds colours for the Japanese 7th Armoured Division to the textures available for the APC and IFV with both Poser and DAZ Studio MAT poses to apply them.  There is also a small Clip-Art set to allow you to texture uniforms and other items to match.  The FA Guardian APC pack is a sci-fi product available for Poser and DAZ Studio on the On-Target 3D web site and also from the Renderosity Store; no vehicles are in the download, just the textures and MAT poses.The colours provided are those of the Japanese 7th Armoured division, a real part of the Japanese Ground Self-Defense forces.  It is the elite armored unit of Japan's self-defense forces and the only armoured unit of division size in the current (March 2013) Japanese forces.The Sample images are all rendered in Poser but proper DAZ Studio MATs are included and will give results of equal quality.
Texture Creation Kit for FA Stormbringer DropShip.: Made after a customer request; sorry it took so long but things have been hectic at Fire Angel Towers lately.  Two simple sets of Blank textures for the Stormbringer Squad DropShip, so you can easily add your own insignia to them.  MAT Poses are supplied so you can adapt them to apply your own textures made using these.  Only useful if you have the FA Stormbringer Squad DropShip pack, available from my Renderosity store.
Space Agencies Pack 1 for FA FireBlade vehicle.: A set of textures with MAT poses for the FA FireBlade vehicle, available from my Renderosity store. Textures for ESA (European Space Agency, 2 sets), ISRO (Indian Space Research Agency 1 set), JAXA (Japanese Aerospace eXploration Agency, 4 sets), NASA (they need no introduction, 2 sets) and the UK Space Agency (2 sets).  Not all of these are shown in the image.  The Mars versions mainly differ by having different coloured dust on the vehicle, not by having dramatically different paintwork.  Like the texture sets shipped with the commercial package each bodywork texture is available at a choice of 8k (8192x8192) or 4k (4096x49096) resolution.  More space agencies to come in another free package.
Space Agencies Pack 2 For FA FireBlade Vehicle.: A set of textures with MAT poses for the FA FireBlade vehicle, available from my Renderosity store. Textures for the Australian Space Agency, Canadian Space Agency, French Space Agency (CNES), German Space Agency, New Zealand Space Agency, Norwegian Space Agency, Polish Space Agency and the Swedish Space Agency.  Not all of these are shown in the image.  The Mars versions mainly differ by having different coloured dust on the vehicle, not by having dramatically different paintwork.  Like the texture sets shipped with the commercial package each bodywork texture is available at a choice of 8k (8192x8192) or 4k (4096x49096) resolution.  More free textures for the FireBlade are likely to follow in a while.
Postal Pack 1 for Future Traffic 2.: For Poser 8 and later or DAZ Studio 3a and later. UPDATE: As well as the Deutsche Post van there is also a Deutsche Post DHL van for German users now.  Each of the four German options has a different registration plate so you can use all of them if you wish. A customer request.  This package is a texture add-on for the Future Traffic 2 set, providing Van 3 with a choice of eleven body textures.  These put the van into the colours of the postal services of one of ten countries: Australia, Canada, Germany, Japan, New Zealand, Norway, Poland, Sweden , the UK and the USA.  For each country there are two options each with a different vehicle registration plate (known as a license plate in the USA).  These textures could not be provided as a commercial product due to trademark issues, so here they are as a free item.
Japanese License Plates for Future Traffic series: A set of 155 (yes, one hundred and fifty five) license plate textures with MAT poses for my Future Traffic series vehicles. These will also fit the FireStar Sedan and other forthcoming high detail civilian vehicles. One set of bus plates, car plates and commercial car plates for each Japanese city on the list. The commercial car plates are used on taxis and hire cars. The set of cities is: Fukuoka, Hiroshima, Kobe, Kyoto, Nagoya, Osaka, Saitama, Sapporo, Sendai, Tokyo and Yokohama. This is all of the Japanese cities that had a population of more than 1 million in 2016.
Flower Power for Future Traffic 3: NOTE this is an add-on texture set; THE VEHICLES ARE NOT INCLUDED they are a commercial item.  A set of four MAT poses with textures for the Future Traffic 3 vehicles.  You can find Future Traffic 3 in my Renderosity Store.
Flower Power for Future Traffic 1: NOTE this is an add-on texture set; THE VEHICLES ARE NOT INCLUDED they are a commercial item.  A set of four MAT poses in both Poser and DAZ Studio formats, with textures for the Future Traffic 1 cars.  The cars are available from my Renderosity store.
Hello Kitty textures for Future Traffic 3 Bus.: NOTE: No vehicle is included in this package, it is a texture and MAT pose pack. The bus is part of the commercial Future Traffic 3 package, found on Renderosity. Inspired by real Tokyo buses this package provides two Hello Kitty paint schemes for your Future Traffic 3 bus, each with two minor variations. These incorporate the Hello Kitty title in either Japanese and English or just in Japanese. Textures and MAT poses provided, the MAT poses also call some existing textures from the Future Traffic 3 package. Enjoy!
Mystery Machine texture for Future Traffic 2 Van 2: For Poser 8 and later.This package is a texture add-on for the Future Traffic 2 set, providing Van 2 with a Mystery Machine texture.  As there will certainly be Scooby Doo fans in the future I thought somebody might want to paint their van in this much loved pattern, emulating the van used by the gang in Scooby Doo.  Have fun!As this is a distinctive texture be careful using it, it is not advisable to use it commercially as the company currently owning the rights to the cartoons may come after you.  Try some fan-art though, they will love it!
FA FireDream Police Forces Pack: An add-on texture pack for the FA FireDream light shuttle. This provides textures and MAT poses for the following Police forces: Chicago Police, Houston Police, Illinois State Police, Kent Police (UK), LAPD, Metropolitain Police (London, UK), Miami Police, NYPD, Philadelphia Police, Royal Canadian Mounted Police, Thames Valley Police (UK) and Toronto Police. Only a small sample are shown in the image provided.  The colours used are based upon current or recent Police helicopter colours as the FireDream would be used by Police in a very similar way to a helicopter if it were real.
FA FireDream French Navy textures.: A texture and MAT Pose pack providing two French Navy textures.  Both are for the 35 Flotille, a real French Navy unit currently having air-sea rescue and combat-search-and-rescue as its primary missions.  Two paint schemes represent the FireDream painted in colour for peacetime operations and with all grey paintwork for combat zone operations.  The 35 Flotille (French Navy Squadron) is highly regarded both in France and throughout NATO.
European bus texture pack for Future Traffic 3: This is a texture pack with MAT poses to add real European bus company colours to the bus from the Future Traffic 3 set.  NO BUS IS INCLUDED IN THIS PACK, THIS IS A TEXTURE AND MAT POSE PACK.  The bus is part of the commercial product, Future Traffic 3, available from my Renderosity Store.In this package are MATs to apply bus textures for buses from Amsterdam GVB, Arriva London (2) Arriva UK (outside London, 1 only), Berlin BVG, Brussels MIVB, Madrid EMT, Paris RATP, Rome ATAC and finally the Warsaw ZTM organisation.  NOT ALL ARE SHOWN, download the pack and try them out if you have Future Traffic 3.Destinations appropriate for the Eurolines and Flixbus companies are Berlin (Germany), Bern (Switzerland), Bratislava (Slovakia), Milan (Italy), Paris (France), Prague (Czech Republic), Rome (Italy) and Warsaw (Poland).This set was a customer request.  For trademark reasons I could not provide these textures with the commercial product so I made them a free download.I could not make textures for anywhere near all the major cities in Europe, these are just the ones I found first in my research.  If your home city is missing from the list it does not reflect my opinion of the place, just my limited time.  Future Traffic 3 comes with texture templates like all my products!
North American bus pack for Future Traffic 3: This is a texture pack with MAT poses to add real North American bus company colours to the bus from the Future Traffic 3 set.  NO BUS IS INCLUDED IN THIS PACK, THIS IS A TEXTURE AND MAT POSE PACK.  The bus is part of the commercial product, Future Traffic 3, available from my Renderosity Store.In this package are MATs to apply bus textures for buses from Chicago, Coach Canada, Coach USA, Dallas, Fort Worth, Los Angeles, New York (2), Orlando (2), the Santa Clara Valley and finally Toronto, Canada.Destinations appropriate for the Coach Canada bus are Toronto, Montreal, Vancouver, Calgary, Ottawa & Gatineau and finally Edmonton.  For the Coach USA bus I have supplied Los Angeles, New York City, Chicago, Houston, Phoenix and Oklahoma City.  You could apply the US destinations to the Coach Canada bus too as they do run trips into the USA, and the Coach USA network does include journeys into Canada too.This set was a customer request.  For trademark reasons I could not provide these textures with the commercial product so I made them a free download.There is also a display MAT for NOT IN SERVICE, something all bus companies sometimes need to use.  This can be copied to other folders so it is present in all of your MAT folders for the bus to save navigating around your folders all the time...I could not make textures for anywhere near all the major cities in North America, these are just the ones I found first in my research.  If your home city is missing from the list it does not reflect my opinion of the place, just my limited time.  Future Traffic 3 comes with texture templates like all my products so make more!
FireBlade Umbrella texture pack.: Some more textures for the umbrella that shades the rooftop dining area on the FireBlade vehicle.  Some people actually like the advertisements on bistro umbrellas, so here is a set of internationally well-known drinks adverts for your umbrella.  Some of these drinks are popular in the US, some in Europe or Asia and some are popular almost everywhere.
Courier Company MATs for Future Traffic 2 (Van 3): Note that NO VEHICLE IS INCLUDED, this package is a texture and MAT pose pack. UPDATED 6th May 2020. If you downloaded before then please download again to get the corrected file. Textures and MAT poses for Van 3 from the Future Traffic 2 product. These represent 7 of the world's largest delivery companies, with multiple vehicle number plates for most. The companies are DB Schenker (German), DHL (originally American, now German), DPD (French), FedEx, (American), PostNL (Dutch), TNT (Dutch) and UPS (American). All of these companies are among the top ten of the largest delivery companies in th world, with DHL being the largest. The logos could not be shipped with the Future Traffic product for trademark and copyright reasons, but were customer requests, so here are the textures and MATs as a freebie. The vehicle is part of Future Traffic 3, a low poly vehicle set in my Renderosity Store.    
Flower Power for Future Traffic 2: NOTE this is an add-on texture set; THE VEHICLES ARE NOT INCLUDED they are a commercial item.  A set of four MAT poses with textures for the Future Traffic 2 vehicles.  The vehicles are available from my Renderosity store.
Japanese Taxi Pack for Future Traffic 3: This is a texture pack with MAT poses to add Japanese style options to the taxi from the Future Traffic 3 set.  NO TAXI IS INCLUDED IN THIS PACK, THIS IS A TEXTURE AND MAT POSE PACK.  The taxi is part of the commercial product, Future Traffic 3, available from my Renderosity Store.In this package are MATs to apply taxi textures which will also apply the supplied Tokyo taxi license plates.  There are also MATs for license plate textures for other Japanese cities, these need to be applied afterwards to overwrite the Tokyo plates.   There are plates for Fukuoka, Hiroshima, Kawasaki, Kobe, Kyoto, Nagoya, Osaka, Saitama, Sapporo, Sendai, Tokyo and Yokohama.  Each Taxi comes with "TAXI" on it in Japanese or optionally with the Western word "TAXI" on as well.  Some real Japanese taxis have the Western word on and some don't, so you can choose whichever you prefer.NOT ALL TEXTURES ARE SHOWN in the promo for space reasons.For more details see the supplied ReadMe file in the .zip file.
Honolulu Bus textures for Future Traffic 3: This is a texture pack with MAT poses to add Hawaiian bus company colours to the bus from the Future Traffic 3 set. NO BUS IS INCLUDED IN THIS PACK, THIS IS A TEXTURE AND MAT POSE PACK. The bus is part of the commercial product, Future Traffic 3, available from my Renderosity Store. In this package are MATs to apply bus textures for buses from Honolulu with 4 destination options. The license plates are different for the two bus colour options. This set was a customer request. For trademark reasons I could not provide these textures with the commercial product so I made them a free download. There is also a display MAT for NOT IN SERVICE, something all bus companies sometimes need to use at times. This can be copied to other folders so it is present in all of your MAT folders for the bus to save navigating around your folders all the time...
FA FireDream NATO & Allies texture pack: An add-on texture pack for the FA FireDream light shuttle. This provides textures and MAT poses for the following forces: Australian 405 Squadron, Canadian Air Force, German Army Command, Japanese Air Force, Japanese Special Forces, New Zealand Air Force, Norwegian Air Force, Polish Air Force, Royal Air Force 100 Squadron, Tropical Special Ops with no national markings, US Army and US Navy. Only four of these are shown in the image.
Striped Stockings for LDStockings - Poser: This set includes a total of 16 texture sets for LD's free stockings for V4/G4/A4.For use in Poser7 and Daz StudioDaz Material files will be uploaded separately.
Lila - Poser: Character Morph / Texture Pack. 5 Make Up Options. V4.2 Morph++ required. *plz note. this is my first character upload.. any problems, please contact me and i will do my best to fix it.
Lila - DS Files: DS files. Character Morph/texture Pack for V4.2. V4.2 Morph++ required for Morphs. 5 MakeUp Options.
Black & Red Satin - Roses Egyptian Princess: This texture set includes 6 textures for the Princess2 dress and Cape, 4 textures for the Train and 7 for the Princess1 dress.  Daz files uploaded separately.
Emma - V4 SSS for Poser: Emma for V4 is a dialed morph with a base skin and 10 makeup and 3 lash options, as well as Glossy and non-glossy lips.  This upload includes SSS settings created in Poser 9.This upload is for Poser only; requires V4 and V4 Morphs++May be used in commercial and non-commercial renders.As always; If there are any issues please contact me via email.  Enjoy :)
Velvet and Leather - Sanbie's TC37: A single texture set; Velvet and Leather for Sanbie's TC37 for Dawn  
Adeline - V4 for Poser - Updated: Adeline is a dialed morph; this upload includes new SSS Settings.  It was pointed out to me before that what I had wasn't right on the old one; and so I set out to learn what I could.  This is the result of that.  I have since become a bit more proficient at Poser but I don't claim to be an expert... so, if there are any issues or problems Please contact me and let me know.This file includes; All New Makeup options; 7 eye-shadows and lips separate as well as 3 fantasy sets (10 total), 4 Eyes, a dark brow option is default with a lighter brow option that can be added,  SSS settingsOK For personal and commercial renders.  
Emma - V4 & Genesis - DS Only: Emma Includes dialed morphs, and textures.  She comes with 5 Eye options, 2 Lash colors and shapes, 10 lip and shadow options set separately for mixing it up if you choose to as well as Shaded and Non Shaded skin options.  Shaded skin options use Omnifreaker's Human Surface Shader as well as SSS, Velvet and Translucent settings.  Included are .dsa and .duf filesRequires V4, V4 Morphs ++ OK for personal and commerical renders; DO NOT re-upload to any site and claim as your own work.  Any issues with the files or the download, please contact me as soon as possible.
Leather Textures - Vanessa Dress for Daz 4.5: 8 leather textures for Vanessa Dress by 4blueyes.  Daz files and textures only.  Poser files will be uploaded at a later date.
UPDATED - Adeline - Poser & Daz 4.5 - #2: *** NO TEXTURES IN THIS FILE - SEE #1 FOR TEXTURES.***The poser files have been fixed.  Adeline includes a character morph and textures.  4 Eyes, 2 Brows, 4 Makeups and 1 default map.  There are non shaded and shaded versions ( HSS-Daz).  Required Products - V4.2 and Morphs++.  Please do use for your Personal or commercial renders.  Please do not upload to any site or claim as your own work.  If you happen to make an image; send me a link,  I would love to see it.To make it easier on downloading,  I have separated this into two downloads.  This is the second one.  It includes all daz and poser pz2 files.  The first one is available here:  http://www.sharecg.com/v/67027/view/11/Poser/Adeline-for-Poser-Daz-Studio-4.5-1
UniDwarf Hero Poses: Here are 5 super poses for use with the Sixus1 UniDwarf. These poses have been tested in Poser 7 and DAZ Studio 3. These poses are also completely compatible with the Sixus1 Goblinz line. The UniDwarf is available from RuntimeDNA.
UniDwarf Hero Poses for DAZ Studio: Here are 5 super poses for use with the Sixus1 UniDwarf. These poses have been tested in DAZ Studio 3. These poses are also completely compatible with the Sixus1 Goblinz line. The poses are in the DAZ Studio format. The UniDwarf is available from RuntimeDNA.
DAZ Centaur Poses: Here are four poses to use with the DAZ/Zygote Centaur, which DAZ has recently made available to the Poser and Studio communities again, and for free. Please see the readme file for details.
DAZ Centaur and V4 poses: Here are four poses to use with the DAZ/Zygote Centaur, which DAZ has recently made available to the Poser and Studio communities again (and for free), and with V4. Please see the readme file for details.
Greatest American Hero for David and M3: Turn your David or M3 into everyone's favorite 1980s television superhero - Ralph Hinkley, a.k.a the Greatest American Hero. The zip contains MAT poses for use with the tunic packs and hooded cloaks for the male unimesh G3 characters.
Flayer Shader: This is a Materials setting for Flayer by Sixus1. While Poser 7 and above provide default settings for Subsurface Scatter and Ambiant Occlusioin, they tend to only work well with a certain type of figure, namely the DAZ Millenium figures and the Poser G1 and G2 figures (nothing wrong with that). This Materials setting uses colors applicable to the texture map for this figure and extend the distance for AO. In the case of the older Sixus1 figures, Bump has also been added. For Poser 7 and up.
H.I.M. Shader: This is a Materials setting for HIM by Sixus1. While Poser 7 and above provide default settings for Subsurface Scatter and Ambiant Occlusioin, they tend to only work well with a certain type of figure, namely the DAZ Millenium figures and the Poser G1 and G2 figures (nothing wrong with that). This Materials setting uses colors applicable to the texture map for this figure and extend the distance for AO. In the case of the older Sixus1 figures, Bump has also been added. For Poser 7 and up.
Scrum Shader: This is a Materials setting for Scrum by Sixus1. While Poser 7 and above provide default settings for Subsurface Scatter and Ambiant Occlusioin, they tend to only work well with a certain type of figure, namely the DAZ Millenium figures and the Poser G1 and G2 figures (nothing wrong with that). This Materials setting uses colors applicable to the texture map for this figure and extend the distance for AO. In the case of the older Sixus1 figures, Bump has also been added. For Poser 7 and up.
Lusitana Poses: This archive contains 9 poses and a zero reset pose for Lusitana by 3Dream (a free figure available at his site at http://www.arrow3d.com/ )
Project Human Female Shader: This is a Materials setting for Project Human Female by Sixus1. While Poser 7 and above provide default settings for Subsurface Scatter and Ambiant Occlusioin, they tend to only work well with a certain type of figure, namely the DAZ Millenium figures and the Poser G1 and G2 figures (nothing wrong with that). This Materials setting uses colors applicable to the texture map for this figure and extend the distance for AO. In the case of the older Sixus1 figures, Bump has also been added. For Poser 7 and up.
Behemoth 2010 Shader: This is a Materials setting for Behemoth2 by Sixus1. While Poser 7 and above provide default settings for Subsurface Scatter and Ambiant Occlusioin, they tend to only work well with a certain type of figure, namely the DAZ Millenium figures and the Poser G1 and G2 figures (nothing wrong with that). This Materials setting uses colors applicable to the texture map for this figure and extend the distance for AO. In the case of the older Sixus1 figures, Bump has also been added. For Poser 7 and up.
Adam 2 Shader: This is a Materials setting for Adam2 by Sixus1. While Poser 7 and above provide default settings for Subsurface Scatter and Ambiant Occlusioin, they tend to only work well with a certain type of figure, namely the DAZ Millenium figures and the Poser G1 and G2 figures (nothing wrong with that). This Materials setting uses colors applicable to the texture map for this figure and extend the distance for AO. In the case of the older Sixus1 figures, Bump has also been added. For Poser 7 and up.
Sitting Poses for Beorn Areid from Sixus1: Here are 4 sitting poses for the Beorn Areid figure by Sixus1. It's available at RuntimeDNA and is part of the awesome Dwarvez line of figures. These poses were tested in Poser 7 and D/S 3, but should work in Poser 6 and up and version 2.3 or 3 of D/S.
Project Human Male Shader: This is a Materials setting for Project Human Male by Sixus1. While Poser 7 and above provide default settings for Subsurface Scatter and Ambiant Occlusioin, they tend to only work well with a certain type of figure, namely the DAZ Millenium figures and the Poser G1 and G2 figures (nothing wrong with that). This Materials setting uses colors applicable to the texture map for this figure and extend the distance for AO. In the case of the older Sixus1 figures, Bump has also been added. For Poser 7 and up.
H.E.R. Shader: This is a Materials setting for HER by Sixus1. While Poser 7 and above provide default settings for Subsurface Scatter and Ambiant Occlusioin, they tend to only work well with a certain type of figure, namely the DAZ Millenium figures and the Poser G1 and G2 figures (nothing wrong with that). This Materials setting uses colors applicable to the texture map for this figure and extend the distance for AO. In the case of the older Sixus1 figures, Bump has also been added. For Poser 7 and up.
Celtic Belt for Apollo Maximus: A celtic inspired belt for Apollo Maximus. This is a MAT pose to be applied to the Apollo tank top.
A Glimpse of Asia for Shimmery Dawn - Silver: An exciting vibrant texture set for the fantastic Shimmery Dawn outfit by BadKittehCo (available at RDNA - see readme for link). There are textures for bracelets, choker, dress and sandals and MAT poses to apply them. For you convenience, we have included both Poser and DAZ Studio formats.
Britta Shader: This is a Materials setting for Britta by Sixus1. While Poser 7 and above provide default settings for Subsurface Scatter and Ambiant Occlusioin, they tend to only work well with a certain type of figure, namely the DAZ Millenium figures and the Poser G1 and G2 figures (nothing wrong with that). This Materials setting uses colors applicable to the texture map for this figure and extend the distance for AO. In the case of the older Sixus1 figures, Bump has also been added. For Poser 7 and up.
Textures for Yanelis free promoshirt: 5 Textures for Yanelis free promoshirt for V4
Axis Checkpoint: A poseable prop set for a WWII Axis checkpoint or base Sentrypost. The prop contains a Barrier set and two types of booth which can be loaded separately. The barrier set has a sign and support post which can be deleted if necessary for various barrier types/combinations. Tested in Poser 6 & 7
Flak 88: The FlaK 88 was mounted on a cruciform gun carriage that allowed fire in all directions, as opposed to split-trail designs, which allowed fire to the front only. The two "side" members of the carriage could be quickly folded up, allowing the gun to be lifted onto two wheeled chassis for high-speed towing. Model Features All controls operated by ERC from the body tab: elevating and rotating the gun opening the breech raising the stabilizer legs raising the gun steadier and loader moving the elevation indicator firing the gun Scaled to Poser figures.
Dani M for V4: V4 character morph
Flat Morph for V4: A flat morph target for v4's Chest
Open morph for BATLab's Micro Bikini: Open morph for BATLab's Micro Bikini Bot + partial pose for v4
ridge nose comm badge fixed: this is the com badge as as used by the bajorans on star trek deep space nine
high council chambers: this prop building was inspired by star trek, it is a klingon building
trek tools: these were built for me by mechmasters , he told me that it was cool to share these
havoc stuff: meh
the false balok: this is a figure of the false balok puppet features in the original star trek series episode the corbomite manouver
sentinal head: this is a project for use with joequicks classic sentinal body. or any body you choose
mirror fleet pins: a small selection of badges that are meant to represent the imperial fleet on the other side of the mirror
alien house: a cool pad for all your sci fi needs
ridgey headed alien handguns: nuff said
ridgy headed alien swag: a few more trek inspired goodies for you to kling-on
webb spinner 2: excelciore
expressions for balok: these morphs were made for my balok character my werts , it is basicly a replacement cr2 for the figure but it does give the old boy some limited facial movement
space people morphs: these are a group of morphs that will allow you to people your renders with aliens of all sorts they are loosely based on aliens out of the star trek universe  
security guard suit: a futuristic sci fi style security guard vest.     ok so its gunna ask for non existant textures , all i can tell ya is to find shaders you like .   i used rhuda, motion picture badges for the cheveron on the helmet  base clothes could be valiant but i preffer the adventuer continues expansion pack for the base clothing shirt and pants
webb spinner: nuff said
ridgy headed alien tickle stick: this is based on a klife seen un use by the klingons
ridgy headed alien skanning device: this prop is loosly based off of thr devices used by the klingon crew in search for spock
spoon head battle vest: this is intended for use with m4
space chicks for v4.2: these are injection morphs based off of some very popular alien races from the entertainment realm. trek to the stars with these little beauties
dagger and shieth: if you are ever on the flip side of the mirror
futuristic sci fi weather tracking unit: i sci fi prop for tracking digital weather
angry pointey eared aliem zap pistol: this is an obj prop that you can use in poser
ridgy headed alien party supplys: these drinking vesels are based on some of theose seem used by klingons
occupation weapons ( updated ): these are props based on weapons used during the spoonhead occupation of the ridge nose aliens home planet
Free Tree Prop from Cauldron Arts: Hi-quality low poly count Tree Prop for Poser. Ideal for creating scenes that need a lot of trees without causing Poser to choke and go slow.
Cauldron Art's DIY set 1: Cauldron Arts presents a set of DIY equipment, including: Step ladder Opening paint cans Morphing paint brushes Paste table Paint/wallpaper scraper Cold chisel
Cop .357 Pistol: Cauldron Arts presents the "C"ompact "O"ff-duty "P"olice pistol in .357 magnum, specially for use in Poser. This was made to complement our commercial release, NYPD for Hiro3, available from our website or Content Paradise.
10 Knights for M3 Normans: This is a set of ten different clothing textures for each the Tunic and the Tabard, aswell as a full chainmail suit. 37 texture poses in all! Each outfit is based on a drawing seen in the 14th Century "Manesse Codex", one of the most important manuscripts of medieval Germany. (Accuracies vary though, since not each knight is depicted with the same amount of detail and I had to take some artistic license. But it's not meant to be a 100% accurate recreation anyways!) May be used in non-commercial work any way you like. For more info, please see the readme. Tested in Poser 7 only. You need Lourdes M3 Normans Outfit for this. (also available here on SCG.) Have fun!! ---------------- If anybody knows of a really good free shield, please let me know, so I can make an addon set! ---------------- Credits for the promo pics: M3 by DAZ, MOTY Characters by ann0314 & mutedbanshee, Cuffed Tail hair by AprilYSH, RT-Sword by JMalis, Polearm by AestheticDemon, Normans Outfit by Lourdes, Background by nature.
Strider for M4 Valiant: Have you ever felt the need to let your character run around New Zealand, searching for his buddies, pining over a rockstars daughter, and being "just friends" with a blonde elf, all while trying to escape his true destiny? Now you can! This brand-new outfit for Valiant and the M4 Cowboy Duster will transform Michael 4 into an epic hero from a far away world. Included are Boots, Belt, Pants, Bracers, 4 Tunic textures and a coat. All hand painted to be as accurate as possible (some artistic licenses where taken). Happy epic rendering!
Leather Tunic for M4 Valiant: This is a lightly armored leather tunic for M4 Valiant. Comes with 4 undershirt colours and lots of fine details. Suitable for Troll hunting and other types of adventures.   Happy rendering!
Valiant Crusaders: Crusader Knights for M4 Valiant: This is a set of 21 textures for the M4 Valiant Tabard. Intended to use with my previous Templar set, these will transform M4 into a crusader from the third crusade! Be it a king (Richard the Lionheart, Philipe Auguste or Frederick Barbarossa), a member of a knights order (the Knights of Jerusalem, Teutonic Knights, Knights Hospitaller, the Knights of Lazarus, Ibelin, Santiago) or an independent knight out on his own, this set has him showing his allegiance to the world. All Tabards are based on drawings, films, photos, or my imagination. Historical accuracy is of course neither given, nor intended. Happy rendering!
Valiant Crusaders: Knights Templar for M4 Valiant: This is a full set of Templar clothing textures for Valiant! Five different Tabbards, 2 Chainmail outfits in different lengths, various boots, belts - and as a bonus, three different leather glove textures for the free M4 Fable gloves from Dyald (available here on sharecg). Take a look at the second picture for everything included!   Happy rendering!
Valiant Crusaders: Crusader Megapack: This has turned into a real Monster!!! The final part of my Valiant Crusaders, this texture set includes Helmets, Shields, Banners, Capes, Chainmail, Coifs, Undershirts... everything you need for a digital Crusader Army!   Like the first parts, this set mainly contains textures for M4 Valiant; However, some of the accessories are taken from other places.You will need those downloads to be able to use all of my textures. Here's what you'll need: - For the Tunic. Tabard, Pants, Boots and Belt:M4 Valiant (available on DAZ3d) - For the undershirt:M4 Bodysuit (available on DAz3D) - For the Gloves and Banner:Dyald's Fable for M4 - Free on ShareCG sharecg.com/v/30237/browse/11/Poser/Fable-For-M4 - For the Hood (Chainmail Coif):Dryjacks Plague Doctor - Free on ShareCGsharecg.com/v/57155/gallery/21/DAZ-Studio/Plague-Doctor-Michael-4 - For the cape:M4 Despot Outfit by joequick - Free on ShareCGsharecg.com/v/53146/browse/11/Poser/M4-Despot-Outfit - For the square shield:South East Asian Shields by 3DCheapskate - Free on ShareCGsharecg.com/v/65667/browse/11/Poser/South-East-Asian-Shields - For the heater shield:Medieval shields and blade by Lucien_Lilippe - Free on Renderosityrenderosity.com/mod/freestuff/medieval-shields-and-blade-for-poser/73746 - For the helmets:3DSC Medieval Knight Armor by Sara - Free on 3dsc3dsc.francemi.net/medieval.htmFantasy Helmet & Great Helm by Porsimo - Free on porsimo.netporsimo.net/3d/armors.htm Now prepare for some epic renders!
The Ragged Hero Outfit for M4 Valiant: Not every hero wears shining armour. Sometimes all he can afford is a tattered old chainmail shirt, frayed and stained with age (and blood). Will you take pitty on this ragged hero and render him unto an adventure, so that he may once again find glory and riches? (You may need to get him a sword first though. He sold his for food.) Shirt, Pants and Boots texture set for M4 Valiant.   Happy rendering!
Valiant Crusaders: Simple Tabards for M4 Valiant: This is a set of 62 tabard textures for M4 Valiant. Simple, no frills tabards, good for getting bloody! You'll need M4 Valiant (obviously) and I recommend my previous Crusader sets as well.   Happy rendering!
Granny Victoria: INJ/REM Head Morph only for Victoria 4.2 - Requires Morphs++
Procedural Materials: a collection of 48 procedural materials for poser only tested in Poser 8
A Dark Romance: Couples Poses for V4 and M4 (+ Mirrors)
Grandpa Mick: M4 Head Inj / Rem pose only - Req Morphs++
A Dark Romance II: 14 couples poses for V4 and M4
A Dark Romance IV: 15 couples poses for V4 / M4
A Dark Romance III: 15 couples poses for V4 and M4
V4 Takes a Break: 12 (+Mirrors) poses for V4
2 Cool - M4: 17 Poses + Mirrors for M4
Where is the love (V4/M4): Couples poses for V4 and M4 (with Mirrors) making a total of 32 poses
V4 - It's a Stretch: 12 (+Mirrors) poses for V4
Scythe Warrior Poses: A collection of 8 poses for the scythe wielding warrior
M4 - The Model (fixed link): 26 poses + mirrors for M4
Unconstrained V4: 8 poses + mirrors + separate Upper and Lower poses for V4
Structured Art V4: 15 (+Mirrors) Poses for V4
Way of The Sword: A collection of 8 poses for the sword warrior (V4) - most of these poses are slightly modified from my scythe poses, those who have those may not find it necessary to download these.
Horse & Rider: 4 poses for V4 and the Millennium Horse
Way of the Necromancer: 6 poses, 6 lights and 4 expressions
A Dark Romance (Part II): 9 more couples poses for V4 and M4
Metals Mats: 6 metal Mats for poser 8
Way of the Assassin: 24 Poses for the Silent Killer. (some of the poses were broken - hopefully they are fixed now)
V4 - Just a Girl: 15 (+Mirrors) poses for V4
V4 Gunslinger: 15 (+Mirrors) Poses for V4
Luci - V4 (Nudity): an Original Morph-Dialled Character for V4 with textures, requires Morphs++ and Elite morphs, (she will work without the elite morphs in a slightly limited capacity)
Angelic V4: 30 (+ Mirrors) poses for V4
V4/M4 - Pontus Bridge (for Arwen56): A collection of poses for use with Redhouse Studios Bridge of Pontus Prop
V4 Baresark (berserker): 15 (+Mirrors) Axe poses for V4
V4/M4 - Garden Corner (for Arwen56): A collection of poses for DM's garden Corner - Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
Way of The Bow - Updated: 20 (+Mirrors) Poses for V4 Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
V4 - Mansion Staircase (for Arwen56): A collection of poses for Redhouse Studios Mansion Staircase - Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
V4 - Radiance of Spirit (for Arwen56): A collection of poses for Redhouse Studios Radiance of Spirit - Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
V4 - Trajans Wall (for Arwen56): A collection of poses for Redhouse Studios Trajan's Wall - Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
V4 - Glorietta (for Arwen56): A collection of poses for DM's Glorietta - Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
Everyday V4: 50 (+Mirrors) Poses for V4
V4 Oriental Mystery: 17 (+Mirrors) poses for V4
V4 Luci: 17 (+ Mirrors) Poses for V4 these poses were made for V4 with my new character Luci who will be available soon. a preview of the character is available here -> http://justlastknight.deviantart.com/#/d382cly
Modelling V4 II: 15 (+ Mirrors) poses for V4
V4 - Chaired: 12 (+Mirrors) poses for V4
V4 Mom Time: 12 (+ Mirrors) poses for V4
K4 Mom Time: 12 (+Mirrors) Poses for K4 to compliment the V4 Mom Time Poses
V4 - Ways to Die: 9 (+mirrors) Poses, 1x Face Pose and 1 Poser Ready Prop (the stretcher untextured pp2)
M4 - Tough Guy: 20 (+Mirrors) poses for M4
Attitude V4: An updated version of my original attitude poses (13+mirrors + seperate arm poses)
M4 - Curtis: an original morph dialled char for M4 with textures - requires Morphs++ and muscle morphs
Majikal orbs: A collection of orb props to spice up your mystical & magic scenes - textures can be found here - http://www.sharecg.com/v/35397/Poser/Textures-for-staff-and-globes
Horse & Rider III: All the M4 Poses for V4 and all the V4 Poses for M4 + Mounting poses for both and the Horse
Balanced V4: 15 (+ mirrors) poses for V4
Way of the Spear: 26 (+Mirrors) poses for V4
V4 Bad Girl II: 14 (+ Mirrors) Poses for V4 Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
V4 Bad Girl: 16 (+ Mirrors) Poses for V4 Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
Annoyed V4: 12 (+Mirrors) Poses for V4
Naughty Shirts for Bad Attitude: 18 Naughty Shirts mats and poses for RDNA's Bad Attitude - tank Top http://www.runtimedna.com/Bad-Attitude-OUTFIT-BUNDLE-for-V4.html
M4 Native American: 20 poses for M4
Strings 'n' Things: 12 (+ Mirrors) guitar/banjo poses for V4
V4 - the Great Outdoors: 9 (+ Mirrors) Poses for V4 (there would have been more but poser crashed o.O)
Stars in Her Eyes: 15 (+Mirrors) poses for V4
V4 Takes a Shower: 15 (+Mirrors) Poses for V4
a simple seat: a simple poser prop chair
Simple Furniture Props: Simple Furniture Props to go with the simple chair
Forest Pond: A simple terrain with a water layer and backdrop
V4 - No Lady: 20 (+Mirrors) poses for V4
Riverbed (Terrain): Terrain of a riverbed
Snowy Mountain (fixed): another simple terrain with snow mat. (trees and characters not included)
Suspended V4: 12 "suspended" poses (+ Mirrors for V4) : Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
A Touch of Darkness: a set of 20 lights for poser
V4 Endarkened Servitude: 12 (+mirrors) poses for V4
Feel The love (couples V4/M4): 31 (+ Mirrors) poses for both V4 and M4
V4 Shock and Awe: 14 poses (+Mirrors) for V4 : Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
Pregnant V4 (nudity): 9 (+ Mirrors) Pregnancy Poses for V4
V4 Supergirl: 15 (+Mirrors) poses for V4
V4 Pro Model: 15 (+ Mirrors) Poses for V4
North American Sign Language (Cheyenne): A set of Partially Animated poses for V4 depicting North American Indian Sign Language.
More V4: 12 (+Mirrors) poses for V4
Hide / Show Poses for Gen 4: A selection of poses to Show / Hide body parts on generation 4 characters
The Velvet Collection: 28 Velvet Shaders for Poser
The Silk Collection: 56 Silk Shaders for Poser
Slayer V4: 10 (+10 upper/lower) poses for V4
Emotional V4: 30 Expressions for V4
V4 On The Stairs: 20 (+ Mirrors) Poses for V4
The Suede Collection: 12 Suede textures for poser
Way of The Arrow: 10 Archery Poses for V4A4G4
Savage lights: a set of 18 lights (HDR-IBL) only tested in poser 8
Poser Bubbles: Poser prop (not tested in DS)
Naturally, Kids 4: 10 poses + mirrors for The Kids 4
Fantasy poses: 9 Fantasy poses for V4 / M4
Instinct - K4: A set of 42 (+ Mirrors) poses for K4 Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
Vaguely V4: 124 poses for V4
!Portrait Studio Party Ballon and glass materials: A collection of 19 materials in total 10 Glasses Mats and 9 Party Balloon mats for Poser.
The Art of Fighting: 25 staff fighting poses for V4
Horse & Rider II: 4 Poses for M4 and the Millennium Horse
Demonoid: Textures and mat poses for one of the V4 demons I have been using. Horns and wings are not included.
V4 - Just a Diva: 25 Poses + Mirrors for V4
Sense of Man: 9 (+Mirrors) poses for M4
M4 - Maybe a Man: 25 poses + Mirrors for M4
V4 - TextManiac: 16 poses + mirrors for V4
V4 - The Morning After (fixed): Vicky 4 as you've never seen her before. What better way to start the new year - than to show the after-party photos!
M4 - Super Heroes - Hulk: 18 (+Mirrors) Poses for Michael 4
M4 - The Fight: 24 poses for M4
Mugshot Board for Poser: a simple prop for "mugshots"
V4 Piety: 26 poses + mirrors for v4
V4 - Standing Poses: 12 (+Mirrors) Standing poses for V4
V4 - Not so Vicky: 16 (+ Mirrors) Poses for V4
M4 - The Workman: 10 poses + Mirrors for M4
131 Poser Materials: the name says it all :)
Assorted poses for Antonia: 10 poses + Mirrors for Antonia
V4 - Ornamental: 24 (+Mirrors) poses for V4
M4 - Piety + Extras (For Corey): 29 poses + Mirrors for M4
V4 - At Days End: 20 poses + mirrors for V4
V4 - Just a Girl III: 45 poses + Mirrors for V4
Happy Halloween: 6 Halloween materials for poser
The Planets - Updated: Poser props depicting the planets of our solar system Uranus has now been added.
The Planets 2: Updated files - planets now have their (approximated) size ratio to earth fixed.
M4 - Gentlemanly Conduct: 18 poses + Mirrors for M4
The Sun: Sun Prop to accompany the planets
Miscellaneous V4: More V4 Poses (21 + Mirrors)
Elegant V4: 26 (+Mirrors) Kneeling / Sitting Poses for V4 (a lot of these poses require IK to be OFF)
Romantic Lights (Poser): a set of six subtle lights for those romantic moments. These lights assume the subject(s) are standing in the default location, they are not parented or pointed allowing for easy manipulation.
The Autumn Collection: Procedural Mats for Poser (only tested in Poser 8)
Jenna for V4: my 3rd character for V4 - Enjoy :)
Arched Window With Wall: Windowed Poser prop
North / South Sign: A simple signpost for poser
Spirit of Michael: 9 (+mirrors) poses for Michael 4
Spirit of Michael III (Final): 12 (+Mirrors) Poses for M4
V4 - No Ordinary Hero: 13 poses (+Mirrors) for V4
V4 - A girl for all Seasons: 31 Assorted poses (+Mirrors) for V4
Macabre for Hot South: 13 mat poses for hot south
Thomas for M4: A dialed character for Michael 4
V4 - Mixture: 20 poses + mirrors for V4
K4 - A Kid for All Seasons: 50 poses + Mirrors for Kids 4
V4 - At the Door: 12 (+Mirrors) Poses for V4
V4 - Predatory: 12 (+mirrors) poses for V4
V4 Chaired II: 15 (+Mirrors) Poses for V4 Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
V4 - Drama Queen: 15 (+Mirrors) poses for V4
Poser Frames: 10 Colourful Frames for Poser
M3 Piety (for Corey): 29 poses + mirrors for M3
V4- The art of Majick: 22 poses + Mirrors for v4
M4 - Warrior Statue: 42 poses + Mirrors for M4
V4 - Cheeky: 21 poses + Mirrors for V4
M4 - Naturally: 12 (+Mirrors) Poses for M4
V4 - No Ordinary Hero II: 50 poses + Mirrors for V4
M4 - Brotherly love (fixed Download): 12 poses + Mirrors for M4
The Dye shop for Reby Hair: This is a combination of 8 full colours and 16 streak sets for Reby hair. Well a girl does like to have a little colour change now 'n' then :)
V4 - Porcelain: 18 poses + Mirrors for V4
V4 - My Way!: Every self respecting boy (and probably more than a few husbands too), will know "That Look". V4 takes her "mom side" to a whole new level, don't make her Angry ;) 30 poses + Mirrors for V4
Defiant V4: 9 (+Mirrors) poses for V4
M4 - Super Heroes - CapAm: 12 (+Mirrors) Poses for M4
Uniquely - V4: 30 Poses + Mirrors for V4
Feel The Love II (couples V4/M4): 9 (+ Mirrors) poses for V4 and 9 (+Mirrors) poses for M4
M4 - The Workman Part II: 10 poses + mirrors for M4
V4 - The Beach: 12 poses + Mirrors for V4
V4 / M4 Relationships: 6 poses + Mirrors for M46 poses + Mirrors for V4
V4 / M4 Basic Instinct (Adults Only): 25 poses + mirrors for V4 and 25 poses + mirrors for M4 : a total of 100 poses. no promos for obvious reasons.
V4 - Athletic (for lizreay): 9 poses + mirrors for V4
The Ring: A simple Ring Prop
Death and Honour III: 25 poses + Mirrors for V4
V4 - Captured: 30 (+ Mirrors) Poses & 1 Expression for V4
V4 - Vogue (For Corey): 15 poses + Mirrors for V4
Jack: Pumpkin Prop for Poser
mat poses for Aether Hair: 8 Mat poses for Aether Hair
M4\V4 Intimacy: 10 Poses + Mirrors for M4 10 Poses + Mirrors for V4
V4 - The Model Inside Me: 24 (+Mirrors) poses for V4
V4 - How Rude!: 24 poses+ Mirrors for V4
Gateway: Poser prop of a Portal with steps Sorry guy i'm ill - this is now fixed
Spice - Fingernails for V4: a set of 40 textures/colours to add a little spice to Victoria.
V4 - ThInking Girl: 20 Poses ~ Mirrors for V4
Death and Honour: 18 (+Mirrors) Poses for V4
Vaguely M4: 12 (+ Mirrors) poses for M4
V4 - Emotions: 9 (+Mirrors) Posers for V4
V4 - Out of Time: 9 (+Mirrors) Poses for V4
M4 - Losing It: 9 (+Mirrors) poses for M4
cooker: simple cooker prop
M4 - A Man for All Seasons: 23 poses + mirrors for M4
Extending Ladder: a simple ladder prop.
JackHammer: A very Simple prop of a Jack-Hammer
M4 - Embarrassment (updated missing files): Michael is getting tired of all those Camera Phones! - 10 Poses + Mirrors for M4
Another World Hair: prop hair for V4
V4 - Portraiture: 16 poses + mirrors for V432 cameras
V4-M4-Secrets: 11 poses + Mirrors for M411 poses + Mirrors for V4
V4 - Debutante: 15 poses + mirrors for V4
V4 - Femininity: 30 Poses + Mirrors for V4
Aiko 4 - The Seer: 9 (+Mirrors) Poses for A4
V4 - The Debater: a set of 15 (+Mirrors) poses for V4
V4 Golf (fixed): golf poses for v4 - these poses are not perfect, but I got frustrated with them, they are however good starting poses with a little tweaking can be made good
poses for Lusitana by 3Dream: 18 (+Mirrors) poses for 3Dreams Lusitana (freebie) available at http://www.arrow3d.com/
Alphabetically - V4: 26 poses for V4
169 Assorted Materials: Original Textures from http://www.3d-diva.com/page1_freetexture_homepg.html
Totally Transparent - for V4: Pose mats for V4. If you have ever needed to make parts of your model (V4) totally invisible without using the "HIDE" function, this is the tool for you, you can make the inner mouth, Eyes (and every other body part) totally transparent for those "ghostly" images. *Warning* These poses change the material - they do not hide the parts, if you need to show those parts again you will have to re-apply the original textures you were using.
Majikal Warrior Poses: 12 poses for V4
Textures for staff and globes: some people (one actually) was complaining about no textures with the PZ3 - which i find odd - but here they are for those having problems. They are not in any order since I had them on a different drive to my poser folder - so put them wherever you like
K4 V4 M4 Assorted Poses: 6 each (+mirrors) poses for K4 V4 And M4
Hair Colours for 3D Universe' Ranger Hair: a collection of MAT Hair Colours for 3D Universe's Ranger Hair
K4 - Everyday: 10 (+ Mirrors) poses for k4
Suki Hayashi - Oriental Beauty: an original complete morph dialled Oriental char for V4 Req Morphs++, with lights, expressions, poses, textures and mat poses,
Sporty K4: 24 Sport based poses for K4 - Some poses require the feet to be reset manually (no clue why)
Reflective Wall mirror: A "full length" mirror for the wall see thumbnail 2 for how to make it reflect.
Ali'Nimhar: Ali'Nimhar (Elvish - meaning Shadow of Deep Wisdom) is my second character for poser. Requires V4 & Morphs++ enlarge the eyes image to see the eye options. (With Bonus Crystal Ball Prop)
Future Computer: A futuristic computer prop for poser
Fantasy Eyes for V4/M4: A coolection of fantasy eyes for V4 / M4
Modelling V4: 15 poses (+Mirrors) for V4
Spellcaster (staff prop): This staff is also included in the Majikal Orbs props bundle. A spellcaster's staff for poser in pz3 format - textures can be found here - http://www.sharecg.com/v/35397/Poser/Textures-for-staff-and-globes
Vickie's Credit Card: Credit Card prop for Poser
V4-M4-Secrets III: 9 Poses + Mirrors for M49 Poses + Mirrors for V4
Pinstripes for Poser: Materials for poser. These mats can be applied to any surface.
V4 - Debonair: 21 poses + Mirrors for V4
V4 - V is for Variety II: 11 (+Mirrors) poses for V4
Oldies but Goodies for raiver top: 20 "musical" textures for Raiver top
V4 - Perfect Pinups: 10 poses + Mirrors for V4
V4 - Floored: 20 poses + mirrors for V4
Kitchen Units: A simple Kitchen Prop
Feathered Wings - Colorama (Mat Poses): This set requires feathered wings + expansion by RAW, although with a little editing it will use the default textures instead. With this set, each section of the wings is coloured seperately and there is also an option to colour the whole set one colour. With 9 colours and 5 options per colour that makes an incredible 45 different options, leading to thousands of colour possibilites. The sky really is the limit. Enjoy :) Feathered Wings : http://www.daz3d.com/i/3d-models/-/feathered-wings?item=7086 More feathers (expansion) : http://www.daz3d.com/i/3d-models/-/more-feathers?item=7087
M4 - Captured: 12 poses + Mirrors for M4
M4\V4 Intimacy Part II: 10 Poses + Mirrors for M4 10 Poses + Mirrors for V4
Gen 3 / Gen 4 Ghosts (Poser only): 15 Shaders to create your own ghosts for any character (Including presets for DAZ Gen 3 and Gen 4 figures)
The Alphabet: 26 upper-case /26 lower-case /10 digits and 33 symbols for poser (untextured)
M4 - All Work: 12 poses + mirrors for m4
Siobahn (Head only injection): inj/rem pose for V4 (no textures)
V4 - Assorted poses: a total of 30 poses (including mirrors) for V4
V4-Floored II: 10 poses + mirrors for V4
V4 - Just a Girl IV: 12 Poses + Mirrors for V4
V4 - Halloween: 20 poses + mirrors for V4also work in D|S
V4 - Canned Poses: 10 poses + mirrors for use with 3-d-c's V4 Desk Pose Set - 1http://www.sharecg.com/v/48191/browse/11/Poser/V4-Desk-Pose-Set-1#commentAnchor
V4 - Musican II (flute)(For Meeshy): 10 poses + mirrors for V4 and the flutethe flute can be found here http://www.sharecg.com/v/41302/browse/11/Poser/Living-In-The-Past
V4 - Extreme: 10 poses + mirrors for v4from now on all my poses will be in a folder called JLK
V4 - Aristocratic: 10 poses + mirrors + cane prop for V4
Archery Target: poser target prop
Frosty: A set of winter props by Glitterati3D and myself snowman, snowballs, pipe and ground props  
Seriously - M4: 24 poses + Mirrors for M4
M4 - Gods of the Arena (for Atrion666): 40 poses + Mirrors for M4
V4 - Embarrassment: 10 Poses + Mirrors for V4. I have tried to keep these similar to Michaels poses, in some places Michaels wouldn't work so they had to be adjusted :) Enjoy!
V4 goes Wimbledon: 12 (+Mirrors) tennis poses for V4
The Poorer Mix (V4/M4/K4): This is a collection of poses which I previously considered unfit for release, until I recently used some downloaded poses that I saw a complaint about, and... well let's just say I think my "poor" poses aren't all that bad now. Included are the breastfeeding poses (which I am not happy with K4 has some real issues when scaling) but they are there, feel free to trash them :)
Nonchalant V4: 20 (+Mirrors) poses for V4
Simple Desk: A simple Computer Desk prop for poser.
Family at the Beach: 7 Poses +Mirrors for K47 Poses +Mirrors for M47 Poses +Mirrors for V4
Theodolite: a very simple prop, not perfect but as long as you don't get too close, it can pull it off :) (maybe some of you more experienced modellers can perfect it :))
V4 Almost A Lady: 30 poses + Mirrors for V4
V4 - V is for Variety: 18 (+Mirrors) Poses for V4
V4 - Sitting Poses: 24 (+Mirrors) sitting poses for V4
V4 - Regal: 18 poses + Mirrors for V4
V4-M4-Secrets II: 10 poses + mirrors for M410 poses + mirrors for V4
M4 - Way of the Staff: 25 poses + mirrors for M4
V4 - Born to Fight: 25 poses + Mirrors for V4
Death and Honour II: 10 poses + Mirrors for V4
rock materials for poser: 12 rocky materials for poser
V4 - Danseuse Exotique: 30 (+Mirrors) Poses for V4. Some of the poses in this collection require IK to be off - and some require IK to be on. if a pose does not load correctly - simply toggle the IK and reload the pose - that should fix it :)
Party time ( textures ): 13 textures for poser, these textures can be applied to any surface from the materials room.
Spice - Eyelashes for V4: a set of 20 Eyelash colours for V4
Dungeon Wall: a simple prop made from primitives
V4 - Catwalk Queen: 15 poses + mirrors for V4
V4 - Pinups in Pink: 10 poses + Mirrors for V4
V4 - Fae Folk - For Corey: 9 standing poses9 Sitting Poses 19 Partial Poses for V4
Just a girl V: 15 poses + mirrors for V4also work in D|S
M4 - Complete Runner: 10 poses + Mirrors for M4
Light room and light set for poser 9+: usage information1. to use the room as lighting only select the room and turn "visible in camera" off (uncheck it).2. if you are not using an image map set the colours for each section by changing the alt-diffuse.3. to turn off lighting from a specific side, make the side invisible.
m4 - Just a guy: 10 poses + mirrors for M4
V4 - Pinups in Nude: 10 poses + mirrors for V4
V4-Mermaid (for Meeshy): a collection of poses for v4 and lost realms mertail
V4 -Streetfighter: 10 poses + mirrors for V4
V4 goes Vintage: 8 poses + mirrors for Victoria
v4 - way of the whip (for lonezoner): 10 poses + mirrors for V4
assortment for V4: 10 poses + mirrors for V4
V4 - Keeping Fit: 10 poses + Mirrors for V4
biscuits' backdrop props: 22 poses + mirrors for use with - http://www.renderosity.com/mod/bcs/biscuits-backdrop-props/101693/#
V4-Floored III: 10 poses + mirrors for V4
box.obz: the box for the dungeon wall
9 Lives: Injection pose files for all 9 "types" of cat available for the millenium cat.
V4 - Euphoric: 13 poses + mirrors for V4, 1 light and 2 cameras
V is for Variety III: 15 poses + mirrors for V4
M4 - Always a Man: 10 poses + Mirrors for M4
V4 - Art Nouveau (For Corey): 22 poses + mirrors for V4
V4 goes Vintage Too Part 2: 8 poses + mirrors for V4
Barely V6: 11 poses + mirrors for V6
V4 - Oh So Sweet (Expressions): 10 none destructive (do not overwrite your face morphs) expressions for V4
The Camo Collection: 24 Camo Shaders for Poser
V4 - Way of the Axe (Revisited): 20 poses + Mirrors for V4
shipping container: basic shipping container prop for poser, with obj files
M4 On Guard (for Sydneykeys): 10 poses + mirrors for M4
V4 - The Modesty Screen ~ for shirley56: 9 poses + mirrors, 6 mat poses for use with the modesty screen found FREE at http://elleque.net/content/?p=3734 plus 11 individual mat files for use on the screen.
V4 - La Poseur: 12 poses + Mirrors for V4for use with the Chair found FREE at http://elleque.net/content/?p=3626
Accidental: 10 poses + mirrors for v4 10 poses + mirrors for m4  
Species for Mil Big Cat: a small set of python scripts + pose files to inject the different species into the Millennium Big cat
V4 - Exhausted (for Wimvdb): 10 poses + mirrors for V4also work in D|S
Black and White: 8 poses + mirrors for V4 8 poses + mirrors for M4  
V4 goes Vintage Too: 8 poses + mirrors for V4
M4 On Guard 2 (for Sydneykeys): 7 poses + mirrors for m4
Daz Animals (Updated Scripts): One python script with pose to change the breed of the Millenium Big CatOne python script with pose to change the breed of the Millenium CatOne python script with pose to change the breed of the Millenium DogBONUS:one Cavalier King Charles Spaniel Injection pose. (dialled, imperfect, but a decent start if someone would like to finish it) Textures / Models Not Included.
V4 - at the office: 10 poses + mirrors for use with 3-d-c's V4 Desk Pose Set - 1http://www.sharecg.com/v/48191/browse/11/Poser/V4-Desk-Pose-Set-1#commentAnchor
Enchanted Roxie: 20 poses + mirrors+ 10 hand poses + 1 mirror script  for RoxieDress is available at (for roxie and miki4)http://www.runtimedna.com/Glitterati-s-Double-Deal-50s-Era-Dress.html
V4 - On Your Knees!: 10 Poses + Mirrors for V4
V4 - Respite: 10 poses + mirrors for V4
V4 goes Vintage Too Part 3: 8 poses + mirrors for V4
V4 - Walk on the Wyld Side: Originally created with P3D's Kitty in mind.15 poses + mirrors for V4
m4 - Casual: 10 poses + Mirrors for M4
V4 goes Vintage Part 2: 8 poses + mirrors for Victoria
V4 - Pinups in Blue: 10 poses + Mirrors for V4
V4 - Always a Woman part II: 10 poses + mirrors for V4
V4 - Pinups V: 10 Poses + Mirrors for V4
the Greeks (for Risus): a variety of poses for v4 and m4 with mirrors totalling 52 poses
M4 - Artistic: 25 poses + mirrors for M4
among us, angels walk: 10 poses + mirrors for V4
Character scaling poses for Poser: six proportional scales for poser (should work with any character in any version of poser)
Change image filter (updated): ever needed to change the filtering (default-quality) for the whole scene? I frequently do - this small script will do it for you (takes account of the version of poser you are using)
m4-way of the whip (for Minyassa): 10 poses + mirrors for M4
The Classics (fixed): 20 classical art poses + mirrors for V4 / M4  
V4 - This Woman's World ~ for shirley56: 10 poses + Mirrors for V4for use with the Chair found FREE at http://elleque.net/content/?p=3626and the Table found FREE at http://elleque.net/content/?p=3646
V4 at the library: 8 poses + mirrors for V4
A Dog's Life: 13 Injection Poses for the Millenium falcon...err - dog, :)
M4 -Way of the Bow: 10 poses + morrors for M4
V4 - Bathtime: 9 poses + mirrors for v4the bath is from 3-D-C Standard Apartment http://www.renderosity.com/mod/bcs/index.php?ViewProduct=80085
Just a girl II: 30 poses + Mirrors for V4
Gothic V4 (nudity): 20 (+Mirrors) poses for V4
V4 - Tribal: 9 (+Mirrors) poses for V4
V4 - Chillin': 35 poses + Mirrors for V4
V4 - Angelic III: 14 (+Mirrors) poses for V4
M4 - Be a Man: 10 (+ Mirrors) poses for the neglected Michael 4 :)
V4 Nuance Expressions: 12 Subtle Expressions for V4. | Nuance (n) : A subtle or slight degree of difference, as in meaning, feeling, or tone; a gradation.
V4/M4 The Darker Side (for Jaidenwolf-ADULTS ONLY): a set of poses depicting rather brutal violence (hence no promos)15 poses + mirrors for V415 poses + mirrors for M4
V4 Luna (nudity) (fixed): an Original Morph-Dialled Character for V4 with textures, requires Morphs++ and Muscle morphs, (she will work without the muscle morphs in a slightly limited capacity)
Silky - 72 materials for Poser (link fixed): each image shows the 3 options for a single material. there are 3 options per material for P9+ Regular, Dark SSS and light SSS. the regular version can be used in lower versions of poser. (also included a free needle prop). With 24 materials there are 72 variations.
Spice - Lips for V4: a set of 20 Lip colours for V4
V4 - Angelic II: 12 (+Mirrors) poses for V4
M4 - Regal: 18 poses + Mirrors for M4
M4 - How Rude! (for LilElf): 24 poses + Mirrors for M4
V4 - Vogue II (for Corey): 15 poses + Mirrors for V4
Spice - Eyes for V4: 12 eye colours for V4
Spirit of Michael II: 9 (+Mirrors) Poses for M4
Katie for V4: A morph dialled Character for V4 (with textures) - requires morphs++
Miki4 / Roxie - Always a Woman (for Glitterati3D): 10 poses + Mirrors for Miki4 that also work with Roxie20 hands 1 python script with pose file to mirror miki
V4 - Way of the Gun: 10 poses + mirrors for V4
V is for Variety II: 20 poses + mirrors for V4
Mirror V6: Mirror script for Victoria 6
V4 - Random: 10 poses + mirrors for V4
M is for Miscellaneous: 10 poses + mirrors for V4
V4 - Way of the Bow II: 15 poses + mirrors for V4
V4 - Musician (for meeshy): 8 poses + mirrors for V4 the large harp is from www.skin2pix.com/html/freebies2.html
V4 - modern girl: 10 poses + mirrors for V4
Square.obz: square for dungeon wall
M4 - Aristocratic: 10 poses + mirrors + cane prop (from V4 will require re-parenting)
poses for Koshini: 10 poses + mirrors for Koshinibranch is free athttp://archive3d.net/?a=download&id=b5f9aad5
V4 Mermaid - Seated (For Meeshy): 8 poses + mirrors + tail poses for V4
V4 - Pinups in Green: 10 Poses + Mirrors for V4
the Dawn of Halloween: 20 poses + mirrors for Dawn
Border Overlay Pro (POSER): A Poser script to add a narrow border to your thumbnails, improvements over the previous version include  1. A GUI 2. 2 types of random colour options 3. A select colour option with 3 ways to select a colour (for those with the need for more control) 3. Remembers the last folder and colour used. 4. Warns when a hex input is incorrect  
Feathered Wings Poses (for Meeshy): 10 poses for feathered wings, these were VERY difficult to make, I had to edit them all manually :/
Candid V4: 10 poses + mirrors for V4
V4 goes Vintage Part 3: third set of 8 vintage poses + mirrors for V4
Just a Girl VI: 20 poses + mirrors for V4
Image Lister (updated): A small script to list all the images and their locations (taken from the image_map : src Image) used in materials on an object.
V4 - Complete Runner: 10 poses + mirrors for V4
2 cool - K4: 20 poses + mirrors for Kids 4
Barrel / bucket: a simple, fillable Barrel \ Bucket for poser (with obj files)
Miki4/Roxie - Always a Woman II (for Glitterati3D): 10 poses + Mirrors for Miki4 that also work with Roxie
V4 - Fae Dreams: 21 poses + mirrors for V4the flute can be found here http://www.sharecg.com/v/41302/browse/11/Poser/Living-In-The-Past
easy DoF for Poser: Select a figure or actor in the scene, run the script, select an actor from the list, set your fstop value (the lower you set it the blurrier it gets). Render when ready.
Toggle Light Emitter Script: a Script to toggle the light emitters on some or all of the objects in your scene. note, selecting the figures and pressing ok will do nothing, the figure names are just there so you know which actors belong to which figure.  
reset figure: Reset Figure - Script for poser
Dawn - The Crate: 10 poses + mirrors for Dawn + 2 props.
Call me Maybe: 15 poses + mirrors for dusk
Poser Only - Random pose script: this script allows you to choose a folder and then loads a random pose from that folder. it comes supplied with a python script and a pose file which launches that script. The pose file can be edited to point to the location of the python script, should you for any reason, need\want to move it
Image Info, script for poser: Find basic info about all images in a folder
V4 Always a Woman: 10 poses + mirrors for V4
Simply Silky: 24 materials for poser
M4 / V4 - Hoopin': 10 poses + mirrors for v4 and m4 +hoop props
List Custom PBMs (for biscuits): a script to show which custom pbm channels are in use. Ignores names 'called "-"
V4 - The Emo Inside (Link Fixed): 20 Poses + Mirrors + 1 simple prop for V4
Zero Dials: A small script that allows you to set dials to zero.you can choose by bodypart or choose to reset all.Works with most characters
V4 - Karma: 10 poses + mirrors for V4
OptionScript ( for Kalypso ): Expanding on the previous Script, this script allows you to toggle the visibility of the actor, reset the actor to zero or lock the actor.  
conforming Clothes for Roxie (Boots not included): conforming shirt and shorts for Roxie
essentially Aiko: 10 poses+ mirrors for v4
Mirror My Pose (POSER): a POSER mirror script which works with weightmapped characters and has been tested on various characters, Dawn, Dusk, V4, M4, Roxie, Rex and Star. it has NOT been tested on anything Genesis. There is a minor issue with eyes on the hivewire characters if you use the CTRL morphs to pose them, but it works fine if you set the poses using the actual dials. 
S4 - Just a Girl: 20 poses + Mirrors for Stephanie 4
La Femme Let's Get Started: 10 poses + Mirrors for La Femme outfit available here  www.renderosity.com/mod/bcs/anarchy-for-la-femme/136199/
Poser Python Shortcut Creator: Python Shortcut Creator is a shortcut creator for python scripts; it creates a shortcut in PP2 formatwhich you can place anywhere in your library. (it comes with it's own pre-made shortcut and 15preset category overlays. ) it remembers the python folder you selected your last script from and remembers where you saved your last shortcut. it creates a colourful 91 x 91 thumbnail (depending onthe colours you choose ) When the script runs for the first time it moves the resources folder to the poser preferences folder. USAGE:------------------------------------------------select any python script, select a save locationselect a foreground colour and a border colour,the accent will be the same colour as the border. Finally select an image overlay ( you can create and add your own )    
Poser PathFinder 2: ©copyright structure 2001 - 2020 Pathfinder 2 allows you to quickly select and open any folder that you have in the script's dictionary - thisDict = { "Poser Application Folder" : os.path.dirname(poser.AppLocation()),"Poser Preferences Folder" : poser.PrefsLocation(),"Poser Temporary Folder" : poser.TempLocation(),"Desktop" : functions().get_desktop_path(),"Temporary Folder" : os.environ["TEMP"],} this can be edited by adding a new name : path to the dictionarye.g. "My Pictures" : "c:/users/username/my pictures", the definitions MUST always be inside the brackets and it is good practice to end each onewith a comma in case you want to add future paths.
Colour me Anything: A script which allows you to strip away all the nodes on (multiple or single) anything(s) within your scene.It then sets the main node to show a randomly generated colour.It can be used in poser versions which are pre poser 11 and poser 11.
Swap Preferred State: Swap Preferred Scenes''' © structure 2001-2019 '''in the scenes folder you will find 2 preferred State files one with theconstruct and one with a ground plane ( P11 Default and P10 Default )Neither Andy.nor La Femme are in the scenes.You can create and save your own preferred scenes.# =====================================================================NB. if you copy PreferredState.pz3 it WILL overwrite your currentpreferred scene unless you rename it to PreferredState.pz3.bakthere MUST be 2 scenes in your preferences folder.1. PreferredState.pz32. PreferredState.pz3.bakin order for this script to work# =====================================================================**for those who do not how to find the preferences folder,there is a small script here that will helphttps://www.renderosity.com/mod/freestuff/poser-pathfinder/83382
Colour me White: A script which allows you to strip away all the nodes on (multiple or single) anything(s) within your scene.It then sets the main node to show a white colour.It can be used in poser versions which are pre poser 11 and poser 11.
Poser Pathfinder: A small script to open fundamental poser locations
Expression Master & Border Overlay (POSER): Two scripts for poser, one to save expressions and one to create coloured border overlays. the expression saver allows for editing of the expressions data file to add or remove morph parts these should be entered totally in lower case.
MatRoomPreview OBJ Replacement: Replace your poser 11 Mat Room Preview superfly Head with a flat plane 
Carousel ( Poser Only ):  Create a 40 frame animation which rotates your figure 360 Degrees allowing you to see it from every side.
Colour me Random: A script which allows you to strip away all the nodes on (multiple or single) anything(s) within your scene.It then sets the main node to show a Random colour.It can be used in poser versions which are pre poser 11 and poser 11.
matroom project - Quick switch ( updated ): Quickly switch between the Head.obz and the plane ( Head.obj ) available at  Replacement OBJ   Should now work wherever your content is installed
Rem2Greyscale: Rem2Grey recursively converts all your REM files to Greyscale giving you the option to add a red X overlay. Rem2Grey creates a dated log file when an error is encountered ( this is usually when access to files is denied ) which you can choose to save to a file, display on screen or ignore. Rem2Grey keeps the last 3 error logs. Rem2Grey remembers the last folder you used. Rem2Grey creates a backup of every thumbnail it converts ( to enable restoration ) - since some PNG files can be malformed and will not convert correctly using PIL.
Item Selector: Since La Femme takes a lot of space in the "actors list" I wrote this to make it easier to find and select the items you want in your scene.
Poser 11 deprecated functions: 1 script to turn the genitals on / off1 script to change the figure height
Reveal Node Type: A python script to rename Nodes so that you can tell what you are looking at. 
Poser Process Command dictionary for python: A python helper dictionary to facilitate processing of poser menu commands which may or may not be available through the regular python interface. This is not a comprehensive list - a fuller, more detailed list can be found @ Smith Micro  
Image Locator: Find all the image maps in the current scene ( firefly or superfly ) also checks whether images exist on disk in the location specified on the node. Gives the following Information: Which figure , prop or light the image belongs to. Which Material the image is on. The name of the node the image is on. The path to the image. Whether the image is present in the location specified. Has the following options: Coloured Rows for easy reading. Print Missing Textures to text editor. Easy Refresh for edited scenes. Works with firefly and superfly. Works with the following Image Types : '.bmp', '.gif', '.tif', '.tga',  '.jpg', '.png', '.psd'
EvoCloth Simulation Helper (updated thanks Feargal: A poser script to help you with Project Evolution in the cloth simulation room. 
TidyNodes:   Tidy your material room nodes  this script is not perfect, I am working on the overlapping nodes on the y - axis
Toggle any light(s): Select any scene light ( or lights ) and toggle it's/their status on/off
Item Delete: Delete multiple Items from large scenes 
Item Hide: Hide Multiple Items in large scenes
La Femme Eye Replacement: a Free script to replace one of La Femme's eyes with a prop eye ( created on the fly - no loading ) - the scripts hides the left eye, parents the prop eye to the left eye, and textures it with the current texture - allowing you to see it, so that you can change it independently of the right eye.
Render in Background: script to add to your python palette to render in background allowing you to keep working in poser as it renders.
Send To Zero (UPDATED): send the currently selected prop or figure to zero co-ordinates.Select a prop click the pose and it will go to zero.Select a figure's Body click the pose and it will go to zero. updated to include cameras and lights
Here Comes The Rain for The Girl 4 / V4:     16 poses + mirrors for the girl 4 / V4
Hide_My_Parts: A script to Show / Hide bodyparts on most figures
six poses for V4: poses for biscuits interior 01 http://www.renderosity.com/mod/bcs/biscuits-interior-no1/110079/
Antsy - K4: 13 poses + Mirrors for K4
CleanMe: CleanMe is a script which includes a number of functions.1) It will delete all nodes from all materials on the currentlyselected object.2) It will copy the current material to all other materials (except preview) on the currently selected object.3) It will remove all detached nodes from all materials on thecurrently selected object.the second script - called endscript, is a control to ensure the script can be run after a poser crash while the script was running. the third script - called matlist will list all the materials on the currently selected object. Tested only in PP 2014
Dawn, A Girl For All Seasons.: 33 poses + mirrors for Dawn.
Golden Gurlz for Party Pretty: A set of 4 textures for Party Pretty by Daz. http://www.daz3d.com/i/shop/itemdetails/?item=9992 No textures are included for the hose.
Tres Tee 4 Tres Chic: A set of textures for the Tres Chic outfit (top only) at DAZ
Tres Funky for Tres Chic: A set of funky textures for the Top from the Tres Chic outfit at DAZ
RMFinniaSeamOverlay: 2 psd transparent psd files with seam match to RM Finnia head texture. These can be used on any exsisting body texture you own for V4 to help blend her head texture with that body texture. See read me for specific details but really simply pick any body texture you already have for V4 that is similar is color to Finnia's head texture and open in it your paint program. then select the FinniaBodyMatch.psd copy and paste over the body texture and save the file with a new name (careful not to overwrite your exsisting file). DO the same with Finnia's heazd texture with the FinniaHeadMatch.psd (to ensure a seamless blend) and then apply via the material room in POser. I hope that this will aid in your creations:)
V4UnhideEyePose: A simple 1 click pose that unhides the X,Y and Z trans settings in V4's eyes to aid you in posing her eyes or character creation.
RMFinniaHdTextV4: A head texture, bump map and specular map with MAT pose to apply for your V4 creations. This started out as a Character I was going to create but instead ended up being a freebie head texture. You may use it to create your own commercial head textures but NOT freebie textures (of course it must be altered in order for you to use it in your own commercial textures) It does have hair on it so it is perfect for portrait work but obviously there is no body or limb textures, nor is there a morph for it. I do hope you will enjoy it!
Custom morphs in Poser & Zbrush 2 in 10 easy steps: A step by step easy to follow tutorial that will give you each step involved in exporting parts of poser characters out of Poser and into ZBrush 2 and give you a general guideline on which tools to use and how to use them in ZBrush to create your custom morph and then how to get your morph out of ZBrush and back into Poser and added to the character and saved to your Poser Character Library. All in 10 easy to follow steps with lots of pictures included!
Tres Flirty for Tres Chic: A set of textures (MAT POSES) for the top in the Tres Chic outfit by 4BlueEyes found at DAZ
Frolic for Gigi Top: 15 different textures for the top of the Gigi outfit available at DAZ. These are simple but pretty :)
Toe curls for Gizmee's Knitted Stockings: A toe curl morph (perfect for al yoru faeries and jesters!) for !Gizmee's Knitted stockings. The toe curl INJ/REM can be found in the !Gizmee stcoking's pose folder after instalation. You must own the knitted stockings for this product to work.
Tres Bella for Tres Chic: A set of textures for the Tres Chic outfit from Daz
Tres Fun 4 Tres Chic outfit: A set of textures for the Tres Chic outfit at DAZ (Top only)
Amaree Elegance for Poser: These are my first foray into actual texturing so be gentle lol. There are 8 jeweltone textures with a new transmap as well. Any feedback is appreciated! Requires Amaree Dress for V4 from DAZ 3D: http://www.daz3d.com/amaree-for-v4
Evening Star Elegance for Poser: My second foray into clothing texturing and transmapping *cheers* In this one we have another 8 textures with 2 transmaps each. Feedback is appreciated! Requires the Evening Star Dress for Victoria 4 from DAZ 3D:http://www.daz3d.com/evening-star-dress
DS Mats for Tindra by TT: This is a conversion of Tindra's poser mat room files. You must own the original pack from TT at RDNA for these to work!! Mats for all the skin, eye, hair and clothing options are included. *hugs* Elli
Cobwebs and Satin - Poser Version: This is one of my first attempts at texturing clothing so be kind lol It's a collection of textures for the Pharaoh's of the Sun gown and expansion packs. Required Products: Pharaoh's of the Sun for V4 Pharaoh's of the Sun Exp. Pack 1 & 2 Poser 5-7 (Mat Room Required)
V4MiniSkirt: This cloth / prop has been tested in Poser 5. If you like my cloth / props be sure to rate them, and if you realy like them please feel free to make a little donation to help make it posible for me to contue to provide you and others with fun new cloth / props.
A3 MiniSkirt: a simple sweet MiniSkirt for Aiko3
V4-CG100: just a little freebie for V4 tested only in Poser5
Paris for MGPT: a new girl... MorphTargets (obj´s) only
Simple G-Mask: a simple G-Mask prop. Tested only in Poser 5.
CG-Mayu: a new morphset for MilGirl only tested in Poser5
Nad for SP3: A new sweet character for SP3. Please read the ReadMe for infos! Tested only in Poser 5!!
Blank Iyz: A set of eyes with morphs to move the pupils about and make minor positional adjustments.  These eyes are intended to be used with the commercial model Blank Boi, available from Daz.  They're sized for him, and they load at the right height for his face, but if you want to use them for something else, I won't tell.If you'd like to, check out my comic:http://bit.ly/p4pcomic
Naeima V4: An exotic, ethnic character for V4
Simple but sexy shirt for V4: Sexy tanktop shirt for V4 with 6 different materials and few morphs (Breasts size, bodybuilder and pregnant)
Poser 5+ Shaders for Nymph Dress: This freebie was previously offered in FaerieWylde's Solstice 2008. 10 sets of shaders for Nymph Dress available at DAZ: http://www.daz3d.com/i/3d-models/-/nymph-dress-for?item=6541
Gumdrops Yard Pool: A simple pool to put in a backyard. It is scaled for Gumdrops but can of course be used with any figure. Just scale it to fit your needs. Works with DS & Poser. Material settings will work with Poser 5+ and DS2.3+.
Textures Mahina Bodice: 3 Textures For the Mahina Light Armor from As Shanim
Textures_Simple Leotard: TexturesPackage for The Simple Leotard from Specs2 You can find the Simple Leotard in the Renderosity freebiezone
Anissa for Aiko3: CharacterPackage for Aiko 3 Now for Free!!
WinterTime: Texture package for Nekoja's Winter Clothes for V3 or Aiko3
New Styles for XStyles Aiko3: Texture package for A3 XStyles available at DAZ
PrettySandals: 10 Textures for the Sandals they comes with the Sione free Gathered Skirt and Shirt for K4Found here:http://www.ShareCG.com/v/41544/view/11/Poser/Gathered-skirt-and-shirt-for-Kids4
Twinkle for Pippin Basket: Character and textureset for Pippin Basket by elleque and partners.Pippin Basket can be found at http://kctc.francemi.net/
FashionSwim: What's included:****************Fashionstyles for the Pippin Swimwear by Pokeydotsfound here and at Rero freestuff*5  MAT Poses for the Swim Suit*5 MAT Poses for the Swim Suit with transmap*5  MAT Poses for the SandalsHave fun and enjoy!!Hugs Marianne
CoolPants: New textures for Trumarcar PippinPants.Base can be found at KTChttp://kctc.francemi.net/Have fun and enjoy!!
Lovely Frillys: Lovely Frillys for Pippin Basket Frillies by trumarcarFound here: http://trumarcar.francemi.net/toons_tc.htmWhat's included:*****************6  MAT Poses for the Top*6  MAT Poses for the Pants *6 MAT Poses for the Hat*6 MAT Poses for Pippins soft shoesHave fun and enjoy!!
PrettyOveralls: New Textures for  Pippin Overalls by TrumarcarWhat's included:*****************6  MAT Poses for the Overalls*6  MAT Poses for the Boots*12 MAT Poses shirt short sleeves (works only with Twinkle)*12 MAT Poses Shirt long sleeves*12 MAT Poses Pippin Diaper***********************************Links to the base figures can be found in the Readme!Have fun and enjoy!Hugs Marianne
Flying bathtub: Funny looking bathtub... Model is .obj file so it should work in any app besides poser. The included texture file is a multi layer tiff you can edit in Photoshop to change the colors of the pattern (each color on its own layer) Tested in Poser 6.
SuperLogo Collection 1.: Small collection of logos/decals of various superheroes. Format is .Obj files with materials so should work in any app that supports OBJ. May need to be scaled down in poser. Logos Included: Spiderman, The Flash, The Punisher, Wonder Woman, X-Men, Robin, Green Lantern, Fantastic 4, Thundercats.
V for Vendetta Guy Fawkes Mask: Mask worn by the character 'V' from the amazing comic by Alan Moore and David Lloyd, and the movie of the same. .OBJ file with texture should work in any app that can import OBJ. Will need to be scaled down if using in Poser.
Swimming Trunk:  OBJ swimming trunk for V4 with plan texture you just import to poser v4 with no option check. I just want to see someone will make a texture for it or load in poser 2014 or poser 11 . goto fitting and make a conforming cloth
OBJ Undie for V4 with Template.: OBJ Undie V4 with template you just import to poser v4 with no option check. I just want to see someone will make a texture for it or load in poser 2014 or poser 11 . goto fitting and make a conforming cloth.
Long Dress For V4_OBJ: OBJ Long Dress for V4 with plan texture you just import to poser v4 with no option check. I just want to see someone will make a texture for it or load in poser 2014 or poser 11 . goto fitting and make a conforming cloth.
Dynamic dress - OBJ - Romper for V4 with Template: OBJ Romper for V4 with template you just import to poser v4 with no option check. I just want to see someone will make a texture for it or load in poser 2014 or poser 11 . goto fitting and make a conforming cloth.
OBJ Skirt and Short for V4: OBJ Skirt and Short for V4 with plan texture you just import to poser v4 with no option check. I just want to see someone will make a texture for it or load in poser 2014 or poser 11 . goto fitting and make a conforming cloth.
Kit -snuggles: This is my first upload here..I made these for snuggles clothing for Kit..I think I uploaded the wrong ones..so I have reloaded with the right ones...Sorry about the muddle I hope you enjoy them..
Alice Dress for Kit3: 4 new textures for kit3 Alice Dress
Poet Shirt M3: You will need M3 poet shirt from Daz3d to use this texture. Only tested in poser7
Sadie summer Dress: I made a couple of textures for Sadies clothing pak1 summer dress..I also did 2 hair colours..hope you enjoy
Cuore Di Moda textures V4: 2 striped outfits for V4 Cuore Di Moda enjoy
WildenlanderM3: You will need WildHunt: WildenlanderM3 from daz3d to be able to use this texture...tested in poser 7
Florentine textures: Made these for the Florentine outfit.. I do hope you enjoy...
Love Fairy V4: Here are 3 texture sets for the free Love Fairy which can be obtained here http://www.pretty3d.com/download_cat.php?cat_id=4 Only tested in poser7 but should work ok in others...If you try I would love to find out! Rendered with default lighting and NO postwork
Babjiv V4: I have been learning how to make my own clothes...now I am sharing with you all... I do hope you enjoy using them...
Bebjam V4: This is another clothing item I have made...at the moment they are all for V4..
Night Time V4: Another complete clothing set made by me for V4 enjoy
V4 Fairy Gown textures: Texture set for V4 Fairy Gown..the original can be purchased from http://www.daz3d.com/i.x/shop/itemdetails/-/?item=5737&_m=d Tested in poser7 and Daz.. If you like my textures please send people here to download Hope you enjoy
Summer Sun V4: I have been determined to conquer making the strap..I did it!! Complete outfit for Daz V4 Please do not share send people here to download.. Thanks for looking Enjoy Sanbie
Winter Days V4: This is another outfit I have made for Daz V4...Hope you enjoy... Sanbie
Janayla_sa for Sadie16: Ok I had a change of character!! I made an outfit for Sadie16..you must have the Sadie16 as this will not fit Sadie
Staci Winter Chills: You will need Staci Winter Chills from daz3d.com to use these textures...Please if you wish to share these..send people here to download... Only tested in poser 7
Spring for Fawne V4: 4 texture sets for fawne V4 which can be brought from Daz 3d.com Only tested in poser7 If you wish to share these files please send people here to download... Thank you for using my textures...
Benefit Gala Gown Textures: 3 textures for the benefit Gala Gown V4 the original may be purchased from here: http://www.runtimedna.com/mod/bcs/index.php?ViewProduct=2941 Only tested in poser7
Mystique V4 for Shadow Dancer: 3 texture sets or mix and match for Shadow Dancer V4 which is available at Daz 3d... Tested only in poser7 and if you like my textures please send people here to download... Hope you enjoy..
ArkanaV4 Textures: Here are 2 sets of textures for Arkana V4 which can be purchased here: http://market.renderosity.com/mod/bcs/index.php?ViewProduct=62056 Only tested in poser7 but should work ok in others...
Beatzarre V4: 3 texture sets for Beatzure V4, You will have to have Beatzarre to use these textures, which you can get from Renderosity...Only tested in poser7
Kamilah Fae A3 textures: You need the Kamilah Fae A3to use these textures. Which you can buy from here: http://market.renderosity.com/mod/bcs/index.php?ViewProduct=62251 Made in poser 7 but they should work in poser 5 and 6. I don't know if they'll work in Daz Studio but if you try them and they do I would love to know. Preview image rendered with default lights with the poser 4 render engine. Please do not share these around but if you like them send your friends here to download them. enjoy!
Domino Outfit V4: 3 texture sets Plus 2 extra half coats for V4 Domino Outfit which can be obtained here http://www.daz3d.com/i.x/shop/itemdetails/-/?item=4791&_m=d Tested in poser7... Please if you want to share my textures can you please send people here..
Didi Dress V4: 6 textures for the Didi Dress ...the original file may be purchased here http://www.daz3d.com/i.x/shop/itemdetails/s6amprncpobi1s3r0vueqo8v43/?item=5973&spmeta=rl&_m=a Tested in poser7 only though should work in others... If you like my textures could you please send people here to download Thank you for trying my textures
FunPlay K4: A cute conforming outfit for the kids 4++ Morphs Clothing has a chibi morph dial...Just load Chibi..then clothing item making sure body is selected..then turn Chibi dial on clothing item to 1.000... enjoy
Time To Play: TimeToPlay is a conforming outfit for your K4 boy enjoy
Summer Dress: Summer dress is a conforming outfit for kids 4++morphs with dial for Chibi.. enjoy
Zappy Wear Kids4: A cute conforming outfit for the kids4 consisting of, top, skirt, and boots
Koit Jacket: Just a quick Jacket for Koit...NO Textures templates included
Winter Blues: Winter Blues is a conforming outfit for Antonia 1.2 Consists of Sweater and Pants.. Templates included Enjoy
Little Ballerina: Free Tubes of a ballerina
Kit sleeper texture: 4 lovely textures for kit sleeper
Kit sleeper texture 2: 4 textures for kits sleeper
texture for v4 sinful knights: v4 texture for sinful knight outfit
Predalienqueen für Swidhelms PA: PA Headmorph, AQTop, PATop, Texture, Mat. AQArmProp
Predatorpeitsche: Figur aus Swidhelms Predalien Tail und Teilen des Claw Sword. THX an die Hersteller.
Swidhelms Predalien Hair: Head+Blademorph, texture, Hairprop, Topprop
T1000 Poser Figure: T1000 ist Apollo Maxismus Figure. -obj., cr2, morph, tex., Face.
Pandora Princess Props 3: 4 Props, 1 morphable.
Pandora Jungleplantplane: 3 Figures, Prop Gruppe (Beispiel), Texturen
Avatar Willow Plane: plane props, texture
Pandora Princess Leggins: Leggins for V4 and PP
Pandora Princess V4: INJ/REM, INJ Pose, MAT Posen, Tail cr2. Tex